Anybody found the .cab operator settings file for TMO USA. All club iMate has is for Pay-As-You-Go or VPN settings?
If not, wonder if the settings file for KJAM will work? :
T-Mobile_USA_Internet_UNI_SA_V2.0.cab
Thanks for any help.
Frank
Check out this link for various carrier cab files: http://www.modaco.com/Dopod_818_Operator_CABS-t235493.html
I tried to use the k-jam carrier cab and found that while it said it installed, it did not work...however the dopod 818 file did the job.
Mitch
Thanks, Mitch.
Guys , thats my post, nice to see it was of use. I have also found out that the Jam operator files work as well. :wink:
Is there anyone know the setting for Optus Australia then?
I want my 818 pro to connect to GPRS there.
Here ya go
:wink:
wardy said:
Here ya go
:wink:
Click to expand...
Click to collapse
Thanks for the file, I have tried to install it, but I just don't know where to config it with Optus.
Can you give me some cue please?
Here is the T-Mobile USA cab settings for GPRS, MMS, E-mail trigger, and tmobile battery program. I got it off my old HP 6315. It ran well in my imate jam. Right now i am waiting for delivery of my jamin, cant wait. To set up the email trigger you have to create an account at the tmobile US web site, choose the hp 6315 as your phone, and then set up your pop3 mail accounts and your email gets downloaded to your device automatically.
You can download the file here under the Tmobile Apps.
http://www.pdaphonehome.com/forums/showthread.php?t=44209
ok, this used to work just fine on my older SP3i, but now my 8125 with the leaked AKU2 rom cannot set the Operator names in the registry. i have set them up exactly the same way, but everytime i reboot, it always comes up as Cingular instead of what i choose. has anyone come up with this and or fixed this problem. thanks also if anyone knows the values of Cingular towers? ie 310410, etc...
Since i updated to the new Qtek 2.17.7.2 WWE ROM my Wizard seems to be convinced that i'm connected to Proximus BE network instead of T-Mobile NL network. Now i'm quite sure my Wizard hasn't got enough power to reach Belgium from where i live so i must be connected to the T-Mobile network. Also when i search for networks from the phone settings i also get to see the T-Mobile network instead of Proximus.
Does anybody know what the problem could be and where i can change the name of the network?
Besides that little but annoying problem the ROM seems a huge improvement.
Thanks,
Chris
There is a registry key that allows you to show any text in the dialer based on the network id's.
Use a registry editor to search for the text you see (literally).
Simply remove the key and the dialer should show the text that is sent over the network.
If you cant find the text in registry . . . .no clue
(I once posted a reply on a thread in the Himalaya section on this)
I thought it interesting that the QTek rom told me I was connected to "Get More..." when every other ROM I've used all tell me I'm connected to "T-Mobile". At least they both reference the same company!
I just thought of another way you could see another network in the dialer as the network name youre really connected to.
In the \windows folder there can be a carrielogo.gif file.
If it exists (and it does on T-Mobile roms) you will never see the actual network name in the dialer but the contents of the carrierlogo.gif file (which is obviously a logo of the operator that distributed the rom).
there are threads on this to find but basically you can only do one thing here: copy the carrierlogo.gif file (using totalcommander) to you PC, erase the contents (or put in your own picture) and copy it back (ignore the rom file warning).
afaik the Qtek and iMate roms do not have a carrierlogo.gif file.
T-Mobile roms do have one, not sure about O2 or Vodafone.
I found exactly one reference to the Proximus string in the State part of the registry. After i changed it to T-Mobile all the screens showed T-Mobile, but after a reset or a reconnect to the GSM network it changes back to Proximus. Really weird because the scan network screen shows the correct name after scanning. Strange bug, but i seem to be the only one that has got it. Oh well, that's life (with software).
Signed_GPRS-stall_Wizard_TMOUS_DEC20.CAB
On mine through a process of elimination I determined that the T-Mobile customization file: Signed_GPRS-stall_Wizard_TMOUS_DEC20.CAB was causing the wrong carrier to show up.
Hi folks,
I just received my HTC TyTn today and thought I would post to say that it is AWESOME! So much smaller and pocketable than the Exec, 802.11G and a very slick keyboard.
Also, and more importantly, I found that the O2 Settings CAB from my old XDA EXEC works 100% perfectly on this device for setting up MMS / 3G GPRS / WAP etc. Its a single cab which simply installs those settings and no other O2 Active junk etc. Bear in mind this is for O2 UK only and will probably screw-up your device if you are using it in another territory.
I fully tested this with email / terminal services / mms messages and all worked perfectly. I have attached the CAB in a Zip archive (don't forget to log in to see it).
I hope someone finds this useful.
All the best,
Codeus
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Yes, the Exec which I got the .cab from is also a GPRS 3G phone. so it works perfectly.
I tend to copy useful little cabs like this to my flash card and make them read-only so I can reinstall should I ever have to hard-reset on the road.
Codeus
mrvanx said:
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Click to expand...
Click to collapse
After about an hour of stumbling about trying to find O2 settings for my TyTN I found your post .... cab is absolutely fantastic, thanks!
GPRS
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
O2 settings
Jackjack said:
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
Click to expand...
Click to collapse
This is a very handy Cab file. It is likely to be for those who have a data tarriff i.e subscribed to mobile.O2.co.uk and not payandgo.o2.uk. However all is not lost because you can still install the cab file and then through connections menus you can tweak them for payand go. The following reference shows the different entries between payg and contract:
http://www.mphone.co.uk/mms_wap_settings_o2.html
Installing the cab file. Just download it either directly to your device or to PC. Do not extract or expand the file if it's on your PC just open active sync, use the explore button to open your device files and put it where you want (storage card for preference). Go to your device and tap/double tap the Cab and it will run.
Mike
O2 Cab file
JackJack
I've just noticed your in the US. This cab file is for UK so I guess not much use for you. What I said about Cab files still applies in general though. You'll often find a choice as to whether you want to download a Cab file or an EXE file. Generally (not always) you run Exe files on your computer and they install to your device (while your conected with activesync). Cab files you copy onto your device and just tap them to run them. I like these cos I can store all the good ones on my SDcard and if I ever have to hard reset I have them all ready to tap and install again without resorting to the PC to reinstall everything.
Mike
mda cab file o2 settings
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
lady_tweetie said:
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
Click to expand...
Click to collapse
plse help am nw at dis
Brillant, thank you
Thanks for that CAB, just used it to get my Kaiser working.
Just had to change the username and password in the settings and works perfectly.
Many thanks for sharing it.
I tried using this cab, and so far it seems to be all good, but I still can't get my MMS working. They haven't worked since I moved to 02 last year and still using my Vario II.
I've just flashed the Faria32 rom and I'm loving everything so far. I was hoping that this would now start working. Does anyone have any suggestions? Or is it just part of the deal with using a non O2 handset? Internet seems to be working fine... just no mms.
Incoming MMS problems on o2 PAYG fixed
I've had a problem with O2 PAYG, after installing the CAB and changing settings from contract to PAYG everything worked except incoming MMS (outgoing was ok). Eventuially I set O2 Active as my work connection, altered the O2 Active access point to payandgo.o2.co.uk, username=payandgo and password=password. The only proxy set was WAP=193.113.200.195:9201 In the MMS settings, the everything was left as default (connect using O2 Active, gateway 193.113.200.195, port 8080, server http://mmsc.mms.o2.co.uk:8002)
Not sure why I had to use O2 Active instead of my internet connection with WAP proxy set, but it works now. Happy Bunny
Incidentaially, O2 refused to help me because the Hermes (O2 Trion) is only supported on contract. I guess if you are on PAYG, you could move to a simplicity plan for a month, get O2 to help, then go back to PAYG and change the settings back to the payandgo ones.
One of the reasons I went back to O2 is cos I've always had good customer service... I'm beginning to rethink that with their "computer says no!" help...
Thanks for the help i'm going to see if the O2 Active settings help me at all.
Anno 2009 still working, thank you.
tytn 2 gprs probs on o2 pay and go
hey all
if u are a pay and go customer (im on o2) when ur setting up ur connections simply enter the contract APN in the access point area..not the pay and go one as its restricted. I did this and boom the tytn was on the net! I suspect this could be the same for other pay and go sims. Hope this helps those of u who were bangin their head against the gprs wall of pay and go smartfone world.
Here's the cab file for setting up gprs and mms for PAYG.
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
keenan316 said:
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
Click to expand...
Click to collapse
Download, copy to device (anywhere, even storage card), run on the device and let it install. That's it.
thanks this worked great on my pay and go O2 HTC Touch Diamond P3700
I have an XDA Exec on O2, but want to put an Orange SIM card in it.
I was told there is a CAB on this forum for the orange settings for the XDA exec but cannot find it anywhere, does anyone know where it is?
Thanks in advance
If you want, you can just put the SIM into the phone, the .CAB won't have anything you need to use the Orange service. XDAs are all unSIMlocked so you don't need to unlock it either.
What is it specifically you want out of the .CAB?
GPRS/WAP settings can be found on Google, and the color schemes are pretty nasty lol