hi another issuer more... when i start to paired with parrato ck3100, it´s start to sincronize with parrot contact, and after a minute, BT of qtek switch off....
Another one
Thanks and regards....
MAR
Related
1. Is there any way to let my BT haedset Blutrek G2 work beside BT SonyEricsson car kit HCB 30? I mean that even if I pared both on my Qtek2020, I can't decide wich of them to use on incoming or makeing a call, becouse just one of them will work (generally the first one pared).
2. How can I let my TOMTOM BT Receiver be recognized by other GPS SoftWare tomtom 3.03 apart?
...sorry for my poor English
thanx a lot for your time!
:wink: :wink: :wink:
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
Did somebody link Qtek s110 (or another Magican) to Pioneer DEH-P70BT Car Audio??
DEH-P70BT can`t find s110 as phone.
s110 see DEH-P70BT and recognize it as handsfree, but don`t work
the phone is listed as compatible
http://www.pioneer-eur.com/eur/campaign/support/bluetoothCompatibility.html
Try updating to the new bluetooth stack
http://forum.xda-developers.com/viewtopic.php?t=33532
Or try this
http://forum.xda-developers.com/viewtopic.php?p=272398#272398
kuld said:
Did somebody link Qtek s110 (or another Magican) to Pioneer DEH-P70BT Car Audio??
DEH-P70BT can`t find s110 as phone.
s110 see DEH-P70BT and recognize it as handsfree, but don`t work
Click to expand...
Click to collapse
Hehe!!!
I have the same Car audio!!!
What you have to do:
- First enter the phone menu on Pioneer.
- Then choose a place where you want to register your phone (ex.: phone1, phone 2 etc.)
- Press center on pioneer and select CONNECTION OPEN on Pioneer.
- The search for the radio on S110, then choose the radio and enter 1111 for the code.
- After that, pioneer should write Phone registered. (Sometimes it will not work for the first time).
- Than you can connect your magician to the radio.
I've these steps and I can use my Pioneer, with no problems.
try it and post the result.
autoconnect works on O2 Xda mini & DEH-P70BT
When I step in the car and have an icoming call or if I dialing somebody my O2 mini automatically coonects to my DEH-P70BT. The only problem is that that works after about 30 seconds since i get to the car. It's doesnt show batery and signal- and sometimes doesnt show the phone number, but autoconnect works fine! Olso I transfered all my phonebook to the radio. To do that just select all the numbers in your phonebook and send them.
I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.
Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...
PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM
2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.
No issues on my 5 series, but I have one of the first ULF modules in mine.
From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?
I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.
............
Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.
lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)
Dear All,
I'm searching on the NET for a long time to find the solution for my serious problem. I hope some of you can help me.
I have a Vodafone V1605 and a VW Passat with PREMIUM carkit of VW.
The carkit works perfect with my NOKIA's but can't finish the pairing of the V1605.
The SAP settings are on. The carkit is seeing the PDA, enter the 16 digit code in the carkit and wait for the connection. But within 5, 10, 30 minutes nothing is happen. All functions of the carkit are not working. One solution: switch of the engine and start again, but also with the same situation.
How can help me???
ROM 2.07.161.1, date 02/06/07, radio 1.32.00.00, pro 32.65.7020.09W
Why the nokia's work and the V1605 don't????