Need your help on this guys...
I am trying to send a picture from my Nokia N70 to my O2 Mini via Bluetooth. I am able to pair both devices properly but every time I send a file from my Nokia, it always says Sending Fail.
What am I doing wrong here?
Thanks
Did you enable receive all incoming beams under Start-Settings-Connections-Beam?
Are you able to send a file the other way around?
I just did....and every works fine.
Thanks for your help!
Related
DOES ANYONE KNOW IF THERE IS A WAY TO SEND FILES
*EG: MP3'S,MIDI,JPEGS*
VIA BLUETOOTH ON AN XDA2?
my problem is tha i have a sony ericcson k700i and have managed to bond the devices but i can find no way on my xda2 of sending files to the phone,
i can send them via ir, but when sending a 4meg mp3 its a bit silly... lol
any help/ideas would be much appreciated ;-)
anybody?
anyone have any clues at all?
i just want to be able to send files from my xda2 to my other mobile via bluetooth,
i can send them from my phone to my xda but not the other way.
anybody know how this is/can be done?
http://forum.xda-developers.com/viewtopic.php?t=7852
you are not alone
i wounder if any of you can help, my bluetooth doesn't seem to be working, have tried now from 3 phones to send things over to my M500 using bluetooth and it just gives a connection error message on the phone i try to send from? why is this? is getting v.annoying?
also why can't i send things from my phone using bluetooth like a picture for example? is this just me being stupid and missing the option somewhere?
thanks,
tom
turn on BT and make discoverable,
Turn on accept incoming beams
use beam to send stuff via BT. (Its not just for IR)
cheers for that - all is now working fine
Tom
no worries.
the beam thing got me at first too, ended up phoning orange about that....the resolution was the level three support guy told me that the m500 must not support file transfere over bluetooth!!!!
:shock:
soon found out about the beam
Imp
i have a mda vario and i want to beam files to another phone thru bluetooth but there is no outgoing port. when i go to bluetooth settings and to com ports, only new incoming port is shown. i cant add a new outgoing port. please someone help me on this.
lsnizzle said:
i have a mda vario and i want to beam files to another phone thru bluetooth but there is no outgoing port. when i go to bluetooth settings and to com ports, only new incoming port is shown. i cant add a new outgoing port. please someone help me on this.
Click to expand...
Click to collapse
Hi,
You'll probably need to start bluetooth via the comm manager.
It will find other hardware with open bluetooth ports.
- Go to the file you wish to beam to someone else.
- Tap the file (keep the stylus on it untill you get the menu)
- Choose " send file" (this might be called differently, my version is dutch)
- Select bluetooth.
Good luck!
Greetz,
Flar
it doesnt seem to work
when I beam a file, it never detects a bluetooth. all it shows is the Infared and searching... it searches for a long time but never detects a bluetooth. any other suggestions?
Re: it doesnt seem to work
lsnizzle said:
when I beam a file, it never detects a bluetooth. all it shows is the Infared and searching... it searches for a long time but never detects a bluetooth. any other suggestions?
Click to expand...
Click to collapse
Hi,
The procedure I gave seems to work properly with my MDA.
You could check if the person you're beaming to has bluetooth (turned on) but I guess you've checked that already.
Otherwise try to minimize the distance between the two pieces of hardware.
If that doesn't solve your problem, I can't help you any further, maybe bring it by the shop where you bought it to have it checked?
Good luck & greetz,
Flar
yeah same here never managed to get bluetooth to work
i found that i needed to enable beam recieve in order to recieve on bluetooth, the incoming and outgoing port stuff i left alone.
so i can now receive files but haven't got a clue how to send them, i make a bluetooth partnership ok (my mate can then send me a file) but i can not find the option to send one back. the file explorer menu doesn't have bluetooth listed on it?
R_J_Webb said:
yeah same here never managed to get bluetooth to work
i found that i needed to enable beam recieve in order to recieve on bluetooth, the incoming and outgoing port stuff i left alone.
so i can now receive files but haven't got a clue how to send them, i make a bluetooth partnership ok (my mate can then send me a file) but i can not find the option to send one back. the file explorer menu doesn't have bluetooth listed on it?
Click to expand...
Click to collapse
I am having this same issue. Anyone know the solution? All I want to do is send some files to my wife's v3 but I cant setup a new outgoing port. I am running the latest official rom from cingular.
You need to ensure you already have bluetooth turned on before starting this procedure (many miss this simple point, as they assume it will automatically turned on)
Tap and hold on the file you want to send, and select "Beam"
Wait a few seconds for it to scan for devices.
All IRDA recipients (If any) will be listed, and below them, all available Bluetooth recipients will be shown.
Hope this helps you m8
I'm using TMobile MDA, newest ROM, and having the same problem, I'm able to recieve bluetooth but there is no option for beaming a file via bluetooth, only IR... and yes, bluetooth is enabled properly and I am properly partnered with a V3...
RE: can't beam files using bluetooth port.
lsnizzle said:
i have a mda vario and i want to beam files to another phone thru bluetooth but there is no outgoing port. when i go to bluetooth settings and to com ports, only new incoming port is shown. i cant add a new outgoing port. please someone help me on this.
Click to expand...
Click to collapse
Make sure both phones are enabled to be "seen" . My friend and I were trying to figure this out the other day, and she has her device set to something like 'make this device invisible' so even though our phones were next to each other, her device wasn't showing up. Once we changed this, both devices were visible.
***However, neither phone was allowing the sending of files to each other thru the bluetooth, and I'm wondering if this has something to do with her having a Sprint Treo 650 w/ Palm OS, and I have Cingular 8125 w/ WM5.... anyone have any answers for this one??***
Thanks in advance.
hallo!
i've got the mda magician since two days, and i love it
all works great, i have the newest update and i have unlocked it with your tool(thank you very much).
the only think that doesnt work is if i want to send a .mp3 file via bluetooth.
about 5 minutes after it started to send, there is standing: failure...
the strange thing is that i can easily receive .mp3 files, and that i can send all other types of files and it does work.
only if i want to send one... and the other one accepts it, it doesnd work!
can you help me?
thx
mayfly
hi i hope you don`t mind me posting this here but i got the same think with my spv m500 that when i send a mp3 via bluetooth it send ok but it take to long to send the mp3 is there a way to sort this out or do all magician do the same think thanks
As the topic says, I can't receive any files using bluetooth from another device. I can send any files to another devices with my o2 mini. My phone name is found on another device, but when I tried to send the file, it failed.
I just got my 2nd hand o2 mini, so I'm clueless. I've tried to install new ms bluetooth stack found in this forum, but still doesn't work.
And I'm also got a problem using activesync via bluetooth, using usb cable the active sync works fine.
I also have this problem, I can't receive files from other phones either! And like you I have installed the new bluetooth stack (aka bluetooth stock) from on this forum.
Yesterday somehow I managed to receive files via bluetooth from other phone (In this case it was nokia N70). But I need to pair the phone first.
EDIT:
I can't receive any files from BT equipped computer, altough I managed to get it succesfully paired. Very strange, my phone can receive files from N70 but not from my PC
Good news, now I can receive any files from any paired devices. I just upgrade the ROM & Radio to version 13 from 12, and now it works.
Hmm.. now it's time to search on how to remove i-mobile branding
goto Settings-> Connections -> Beam
and check if the "Receive all incoming beams" is marked...
Thanks a lot pal, this has resolved my problems.
Thanks a lot pal, this has resolved my problems.
Thank you so much