Why cut the rings every 3 seconds on the new rom?¿?
When i reveived a call, start to ring and on the 3 seconds, start the new my ring... why?¿?
Thanks and regards
Related
Well, it's been a while and everyone's been tweaking their universal, so, have you tried calling yourself and see how many rings it takes before your universal really rings ?
After all the tweaking, it still takes about 2 rings before my Exec actually plays the ring tone. Has anyone been able to shorten this lag time further ?
When my Jasjar is still powered On it rings while I am still hearing the 1st call tone through the receiver of the telephone I have used to call up my Jasjar.
When the Jasjar has powered itself Off, then it is no later than the mid of the 2nd call tone and most of the time just before the 2nd call tone has started playing.
By the way I have done no tweaking in this regard.
Kind regards
Same here, before the 2nd call, acceptable for me.
I am using a device flashed to Jasjar ROM 1.13.53 WWE, Radio 1.04.02 and no extended Rom installed.
regards,
Ruud
You guys seem to get the ringing quite fast
I read somewhere that having many contacts can slow down the phone and therefore increase the number of rings before the exec actually plays the ring tone. I have about 230 contacts with average of 2 tel numbers per contact. Can I ask how many contacts you guys have ?
I'm just trying to figure how to make my exec ring sooner ...
I copied the choice of ringtone directly to my Device/Windows/Rings.
so far it has been ringing almost immeidately.
I have about 100 contacts with an average of 2 telephone numbers per contact.
Regards
Gave an answer on the nr. of rings above, I have about 1.300 contacts with average 2-3 numbers, mail, address.
Calendar is sync with ALL meetings, so also between 1000-2000 entries, I do not recall. I further sync notes and files, but have no tasks.
Hope this helps.
Thanks for sharing the info guys ...
Just found something odd after some testing ... if I use the "Ringer.wav" that comes default with the Exec, it rings just before the second ring starts ... but if I select the "Fantasy.wma" (also default on Exec), the ring only starts after the second ring ... If i use the "Windows Default.wav", the ring also starts at the end of the second ring ...
It appears the more complicated the ring tone, the longer it takes to start ringing ...
mine's varied...i've been using the same ringtone and it can take anywhere from 1 ring to 6 or 7... the varying in lag times has totally lost me. i'm on an old ROM however. could be the issue?
My Dopod 900 rings after 1st call tone when it is ON and on standby mode it rings after 2nd call tone.
My Dopod 900 exactly the same.
golfaholic said:
My Dopod 900 rings after 1st call tone when it is ON and on standby mode it rings after 2nd call tone.
Click to expand...
Click to collapse
my imate (no extended rom features whatsoever), spb pp, diary and weather, using msvc, about 20 meg ram standard boot up.
exactly on the second ring when opened up and screen active.
immediately when i called again the second time to type this email with the lid closed. i assume this is cause the phone and everything was still active cause all i did was close it which really only deactivates the screen.
on the second ring when i turned the device and closed the lid.
so in summary, and i generally dont have much of a problem in this area is at the beginning of the second ring.
I dont have memory card readers running and somebody indicated that this is also a cause of lags.
Hi all!
I am looking for an application, that can "beep"/notify me during a phone call about reaching 1 minute.
It would be cool, if the phone would also "beep" when the incoming call established REALLY (the 2 sec delay...), so I would know I can start speaking.
Do you know any program(s) to do this?
Big thanks!
ajszi
Am i missing something here,..?? I have set a MP3 as my incoming ring tone and the file lasts for just over 1 minute but when it is assigned as my incoming ring tone it will only ring for no more 12 seconds before registering a missed call, is there a way to increace the ring tone time before going to missed call, the damm thing has me running like mad around the house to answer before it rings off
I am sure there is a simple answer to this,,,??
As part of the phone settings there are settings for what happens after your phone rings for a length of time and also for how long your phone should ring before being diverted.
Take a look there and see if it solves your problem!!
Matt
The only options in here are "Answer incoming calls without pressing" which is not ticked and "Talk after" and i have set it for 10 rings. But because the tone is a mp3 song, it does not seem to go on for more than 10 seconds, is there another way or am i looking in the wrong place
Start->Settings->Phone->Services->Call Forwarding->"Forward phone calls only if"-> "No answer: voicemail number, Forward after: 30 seconds"
ahh man, thats great...sorted out fine..but what a daft place to put it. Would have thought it would be something obvious....must be my age..hehe Cheers
If youre device has video calling/receiving - theres a similar option accessed from the phone pad, under video call settings.
Matt
Hi, is there anyway i can change this? if i am making a phone call and i receive a text message i'll hear the phonecall + the sms tone....
Secondly is it possible to stop the sms tone automatically after 30 seconds?
Third ; if someone makes a missed call sometimes my diamond hangs on vibrating and stopt vibrating within 5 min.
bump bump bump.....
I too would like to stop the sms tone when on a phone call.
Also, stop the sms tone if i respond to the phone, ie. i get a message, i touch the screen, the tone stops playing, rather than it playing all the way until the tone has finished. (my current work around is to only have a 5sec msg tone)
kaos_king said:
I too would like to stop the sms tone when on a phone call.
Also, stop the sms tone if i respond to the phone, ie. i get a message, i touch the screen, the tone stops playing, rather than it playing all the way until the tone has finished. (my current work around is to only have a 5sec msg tone)
Click to expand...
Click to collapse
Press the Hang-Up button to stop playing the message alert/ringtone, but it sucks dat you have to do that..
First. It has to stop playing the ringtone after about 15 sec. then wait 1 min or 2/5/15/30/60 mins then replay it for about 15 sec... or some kind of other notification.
Second. It has to stop playing if you get a phone call or press the top-power-button. and if the message isn't viewed in 1 min or 2/5/15/30/60 mins replay the ringtone for about 15 sec or some kind of other notification.
Problem is if i get a phone call and receive a message while calling, i cant stop it because if i hit the hang up button, both will hang, if i don't do a thing i'll hear music of the ringtone & the person i have a conversation with talking.. HELP!?
My Topaz is set with vibration+ring, suddenly after answering a call it opens the call and stopping the ring, but continuing to vibrate for 2 seconds... Do you have a clue?