Related
...long time lurker; first time poster...
did a search on this once and if it's here, sorry i missed it:
what is the reg-locale for ensuring the Bluetooth System-Tray Icon is enabled to launch when bt is active. since performing the following reg-edits, it no longer appears.
Increasing font cache and screen performance:
"HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE"
Change "limit" from "8192" (default) to "16384"
Increase general performance:
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" to "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Enable Cleartype in landscape mode:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
Change "OffOnRotation" to “0”
also... i did this one and then reversed it since i learned (after the fact) that cingular 8125 is already b/g:
Enable 802.11g:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
Assign a value of 1 to dot11SupportedRateMask
Assign a value of 8 to dot11SupportedRateMaskG
thanks to anyone making time to reply!
can someone confirm that their actually is a bt icon that resides in the system tray (top bar) when bt is enabled???
maybe it was a fluke that i actually saw it there for a brief period today?
maybe i'm seeing things?
I have not seen that icon in WM5. But I would like to have it there.
Oh its there alright. In fact, in the online help somewhere on my 8125 it actually lists the icons and their descriptions. One of them is the BT icon.
Its beyond my why there isn't an application that can indicate with a headset icon to notify you if your phone is paired to a BT earpiece. Someone had posted once PhoneAlarm did it, but alas. It does no such thing.
If anyone else knows of a program that will tell you if you're currently connected to a BT device, please speak now!
Ok, found out where the icon is listed. Go to the main WM5 online help on the device and go to Personalizing your device>Over of the Today screen>What do these status icons indicate?
Towards the bottom you'll see the icon... IT EXISTS IT EXISTS!... sigh
it does because today... it appeared for a moment. it played peek-a-boo while device was bugging-out. glad to know i wasn't seeing things. i wonder if having the clock reside in the sys-tray has anything to do with it???
i have found this application http://www.pocketpcfreewares.com/en/index.php?soft=1319 to at least show when the BT is on. It also tries to connect to a headset when there is an incoming/outgoing call. Not having a headset myself, I have not been able to test this function, but bt does turn on on a ring and turn off when I end the call.
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
majdi said:
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
Click to expand...
Click to collapse
Thanks! This .cab works great.
Now I only need the same type of icon for wifi. Anyone got such .cab file???
Works Great on KJAM JASJAR and EVEN A T O M !
Thanks.
I tried it on my k-jam but unfortunatelly... nada
I downloaded the cab file to my pc through the link, then copied the file to my devise and run the installation therein...
Am i missing something?
Weird
I installed this, and nothing happened, so I deleted the program, using "remove program" from Settings/System, and it started working. Go figure.
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Styxer said:
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Click to expand...
Click to collapse
Also still searching for the wi-fi one!
It Does not work on my QTEK 9100. It actually warned me that it's not compatible while trying to install..
Not sure if this has been posted in the Wizard forums before but i just found this in the Universal forums and now have a new Today plugin that displays the status of my Wireless connections. It seems to work for everything except GPRS
Just add the keys below to the Wizards registry.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
For the full info on this, check the Universal forum here:
http://forum.xda-developers.com/viewtopic.php?t=43751
Cheers,
Chris
Nice find puckster will try it - any chance of a screen shot?
meschle said:
Nice find puckster will try it - any chance of a screen shot?
Click to expand...
Click to collapse
There is a photo in the Universal post but here's a screenshot of my K-JAM. The items only seem to activate on the Today screen when you enable the Particualr Wireless mode. As WiFi is disabled as soon as i connect ActiveSync i enabled WiFi in Comm Manager and quickly took the screenshot before WiFi was turned off, hence the unavailable status.
Note you cannot interact with this plugin. it is purely display only.
CHeerts,
Thanks puckster shows up on the list of the items list/today but not on the screen. I assume that is cuz I have no wifi connection right
meschle said:
Thanks puckster shows up on the list of the items list/today but not on the screen. I assume that is cuz I have no wifi connection right
Click to expand...
Click to collapse
When I added the entry, I had to go into the Today setting and uncheck, then re-check "Wireless" which made it appear. At a minimum you should see a bluetooth symbol that says on or off.
If you still can't get it to show up, double check the dword entries you created.
Btw - thanks for bringing this over to the Wizard forum Puckster..it's a handy little Today item.
Mine displays Carrier / Flight Mode & Bluetooth as well as WiFi status.
If WiFi is disabled it does not display on the today plugin however my Bluetooth is always displayed there even when turned off. The Carrier (Vodafone in my case) changes to Flight Mode when you enable it.
I would possibly re-check the registry keys. Also i just remembered i did add 2 extra keys to my registry that werent mentioned in the Universal thread.
I have attached a registry export of the key i created on my K-JAM so maybe you could use this as template as it works on mine.
NOTE: All of the keys are decimal dword entries except DLL which is a string.
Chris
Thanks for your help and I have rechecked everything and all seems ok. Phm reg editor can't seem to import the reg file you gave me ;(
It's nice to have the indicators...but I wish they didn't require the real estate of a whole additional Today bar. I would love to find a way to put indicators like that in the icon tray at the bottom (just above the Contacts soft key image).
this is exactly what i wanted much appreciated.
no go here, but I'm on an old, old ROM
Thanx Puckster, worked like a charm
Exactly what i was lookinf for ty again
zeeboxx:
You need to be using the new AKU2 roms for this to work
which answers "meschle"'s question - assuming he's still on 1.6.7.1
this is excellent... cheers guys!
Hi all,
i have put it in CAB file.
Regards
Have the same on Himalaya
Hi,
I running WM5 on my Himalaya and I have it by default. However, when I tap in the area, it takes me to the Comm Manager or Wireless Manager.
Same on the Wizard or should I check potential differences in the reg?
Cheers,
Hal.
yes. please check the differences. When I click on it, it does nothing.
Thanks.
Having a friend check on his PPC 6700 once he finishes the upgrade.
-Mc
Re: Have the same on Himalaya
ammarl said:
Hi all,
i have put it in CAB file.
Regards
.
Click to expand...
Click to collapse
ammar you are the best man, I have tried all other methods. yours only worked. God bless you.
I ran ammar's cab. The Wireless box appears in my Today screen, and I tried checking and unchecking it, tried soft resets, even tried a re-install of the cab file. I have a T-Mobile MDA, and I have SPB Today Plus and PHM Traylaunch running. I'm using the black theme.
Anything else I might try?
@all,
whenever i am using the phone my ear touches on the gprs button in the taskbar on top. this starts the connection dialogue and the mdac is about to connect via gprs.
i know i can delete all setup connections, but is there a way to get rid off the button?- like with the screen rotate button at the bottom via a registry entry?
any idea anybody?
thanx
got the same problem here... but it usually doesnt connect... annoying yes i know but i dont think its fixable.
howdy,
found toggle start by vijay555 on his homepage. does something close to solve our dilemma: makes the whole start taskbar disappear, thus also the start button. got into contact with vijay to see if he has an idea concerning only the gprs button.
wait and see
Guys, AFAIK, unfortunately, the GPRS icon is displayed by default by the OS. I don't think it can easily be removed without some deep level hacking of the OS. A relatively easy solution would be to display something else on top of it, like a useful clock or battery icon, or memory usage icon etc... is that an option?
V
@vijay,
thanx a mil for your prompt reaction. In case you are dying of boredom one day, would be nice to see what you can do with deep level hacking!
thanx again
Hello,
I use wisbar advance, it has an option to disable or hide the gprs icon!
Regards
Carty..
Carty said:
Hello,
I use wisbar advance, it has an option to disable or hide the gprs icon!
Click to expand...
Click to collapse
now if wisbar, which i do noit want to use, can disable the gprs icon, there must be somebody who knows how wisbar does it.
please, any clues?
cheers there,,
it was only until yesterday that i had the courage to flash my BA to windows mobile 6...
To be honest ... you guys did a great job..
however, bugs have made their way into this one as well, so i will i will be asking you guys to post all your bugs in the following format:
ROM version:
bugs in :
PHONE:
WIFI:
PROGRAMS:
etc...
rom version: 5.2.1629
radio rom : 1.12
proplems:
phone:none
wifi: i can't use the wireless manager to turn on the wifi
prgrams:
1) x-button is not working , all programs are minimizing instead of closing, despite of the x-button being correctly configured
2) i cant get to type arabic letter with the keyboard, though allthe other arabic functions are working,
performance: the device is a bit sluggish
THINGS THAT ARE ANNOTING BUT DONOT REPRESENT A BUG:
1) button lock is not there,,, it is really annoying to find out that your BA is making a random phone call while in your pocket !!
2) I really liked the broadcom bluetooth stack , can i get it working here?
3) sim contacts appear in the phone book and there is no option to disable this , it would be really nice if i could get rid of the duplicates
and again:
thank you guys big time, especially HELMI for the super work,,
waiting for everybody to share their bugs
you can use comm manager, you just have to turn it on tru wlan settings esp after every SR, but after that you can activate it using comm manager. just like wm5...
one thing i noticed is the lack of keyboard sttttuttttteeeerrrriinnnnggg... which is great news since i always use the keyboard via one-handed operation.
x button is working on my unit, which is easily noticed since i have wisbar.
one bug i noticed though is that whenever ur connected to the pc and its syncing with the BA, it will totally freeze the BA for the duration that the pc and BA are syncing, sometimes causing the BA to hang.
xykosomatik said:
you can use comm manager, you just have to turn it on tru wlan settings esp after every SR, but after that you can activate it using comm manager. just like wm5...
one thing i noticed is the lack of keyboard sttttuttttteeeerrrriinnnnggg... which is great news since i always use the keyboard via one-handed operation.
x button is working on my unit, which is easily noticed since i have wisbar.
one bug i noticed though is that whenever ur connected to the pc and its syncing with the BA, it will totally freeze the BA for the duration that the pc and BA are syncing, sometimes causing the BA to hang.
Click to expand...
Click to collapse
It would be nice to switch on Wireless withou having to click on several items though - especially when using spb backup and auto restart after backup and profiles in phonealarm.
- WLAN activation problem
- keyboard problem (repeating characters after releasing keyyyyyyyyyyyyyyyyyyy...)
- phone doesn't work sometimes ("R" and "G" are "NONE") after softreset --> another softreset *immediately* after "R NONE" and "G NONE" appear.
- no ActiveSync --> activate "USB to PC" in Settings, Connections.
life owner said:
rom version: 5.2.1629
radio rom : 1.12
proplems:
phone:none
wifi: i can't use the wireless manager to turn on the wifi
prgrams:
1) x-button is not working , all programs are minimizing instead of closing, despite of the x-button being correctly configured
2) i cant get to type arabic letter with the keyboard, though allthe other arabic functions are working,
performance: the device is a bit sluggish
THINGS THAT ARE ANNOTING BUT DONOT REPRESENT A BUG:
1) button lock is not there,,, it is really annoying to find out that your BA is making a random phone call while in your pocket !!
2) I really liked the broadcom bluetooth stack , can i get it working here?
3) sim contacts appear in the phone book and there is no option to disable this , it would be really nice if i could get rid of the duplicates
and again:
thank you guys big time, especially HELMI for the super work,,
waiting for everybody to share their bugs
Click to expand...
Click to collapse
*install x-button 1.5.
*Use slide to unlock for all screen and button lock..
*Put broadcomm bt 1.7 by helmi.
*use pocket cm as contact application for nice graphics and no sim contact.
krishan2207 said:
*install x-button 1.5.
*Use slide to unlock for all screen and button lock..
*Put broadcomm bt 1.7 by helmi.
*use pocket cm as contact application for nice graphics and no sim contact.
Click to expand...
Click to collapse
With Broadcomm bt 1.7 by Helmi , what are the pros and cons, and does it sort out the wifi activation problem. I have read that there are some new problems with BT using this stack, can you confirm this?
well, sometimes the device stops working, doesn't respond to the power key, or softreset (display al black)it is needed to remove the battery.
P\ said:
It would be nice to switch on Wireless withou having to click on several items though - especially when using spb backup and auto restart after backup and profiles in phonealarm.
Click to expand...
Click to collapse
well, its just a few clicks ( 3 actually) more, a very minor extra minute not a big thing trivial speck compared to having a wm6-enabled BA
no problem
I see no problem in WM6 by Helmi. This is great! Thanks a lot. This is perfect.
- phone doesn't work sometimes ("R" and "G" are "NONE") after softreset --> another softreset *immediately* after "R NONE" and "G NONE" appear.
the ROM is actually super great, it is just that we want to make it greater
also, it would be actually very nice if there was some sort of a power-saving fix-
i use a 2400MAH battery but it is hardly doing 2 days in wm6, while it used to survive for 5 days on wm2003
life owner said:
- phone doesn't work sometimes ("R" and "G" are "NONE") after softreset --> another softreset *immediately* after "R NONE" and "G NONE" appear.
the ROM is actually super great, it is just that we want to make it greater
Click to expand...
Click to collapse
after soft reset or after removing the battery? this always happen to me since wm5 whenever i remove the battery... after seeing R and G values as zero, just SR again.
WM06 draining memory and battery
Hello,
I am experiecing memoray and battery drainage problem. I am having 60.3MB storage memory, 21.65MB free, 109.12MB Program memory & 73.3MB free yet I am getting errors that there is not enough storage or programs memory !!, does any one have a clue? and battery drain rate 10% per hour this is far more than WM05 when it was about 2% per hour. Any hints please.
__________________
Procedure to set button lock....
life owner said:
rom version: 5.2.1629
1) button lock is not there,,, it is really annoying to find out that your BA is making a random phone call while in your pocket !!
Click to expand...
Click to collapse
Use Keyboard Backlight option in settings->system to set button lock..
Procedure to hide sim contacts
life owner said:
sim contacts appear in the phone book and there is no option to disable this , it would be really nice if i could get rid of the duplicates
Click to expand...
Click to collapse
Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
This will hide sim contacts from showing in contacts list.
Backlight on battery power keep on changing to 0 automatically. Don't know what is causing it, disabling PhoneAlarm to see if it help.
mightyox said:
Backlight on battery power keep on changing to 0 automatically. Don't know what is causing it, disabling PhoneAlarm to see if it help.
Click to expand...
Click to collapse
Found the problem, hold on the power button for a couple of seconds while turning it off.
i found a bug, when you arei n the sms and you press options and selected "mark all as read" option.. youll get the new connection thingie instead..... anyone has a fix?
Add contacts
Love the wm6 rom! Works great but ive noticed that i can not add a contact. I can add a contact to my sim but not to my BA. And my BA wont allow me to take the contact from my sim or my call history and add it to my device. Weird. But just thought id add that to the list. I LOVE WM6!
## TamerSpClock v1.4 ##
Last update 13 Dec 2008
"TamerSpClock" is a Windows Mobile 2003/5/6 software which lets you take hand over your time to the max. It is a fully customizable speaking clock & a chimer.
- you can choose a THEME of time intervals of 1 ,5 ,15 ,30 or 60 minutes ,Then you can choose actions to be done on these choosen theme intervals.
- you can adjust when to speak time or chime and when to mute in a way that differs from other programs by means that you can set multi portions (intervals) of time that mute the program automatically for daily use. you can access the file "Validity.ini" found in the folder named "settings" inside the program installation path. this file can be edited by any notepad or word (pocket or pc word) then you can specify at what hours to work on and what to mute (just Change validity = 0 corresponding to hours that needed to be muted & Change validity = 1 to the rest of the hours).
- The program can wake up the device without waking up your screen conserving your battery life and will chime even if the ppc is sleeping or in a deep sleep, The software have a feature that can force the screen not to wakeup (BlackMe feature) at chiming times or (if you choose to) to leave it to the current windows mobile configurations (settings) to decide ,this is useful for some ppc that wakeup the display on every chime which may have negative results on battery life.
- you can put your own wav files to be chimed ,just insert them in folder "Wav" found inside installation directory but use the same names of course.
- This software differs from other similar products in that if you choose for example 15 minute iterval for speaking the clock ,it wll activate itself and speak time on whole miute numbers like 15-30-45-60 and will not just repeat the choosen interval starting from the time you switched it on which results in speaking times like 4:52 and 7:27 etc.
- you can choose or omit salutations like "the time is" & "Am ,Pm" & saying "Oclock" at the whole number hours. this can be customized using the provided links to enable and disable the action features.
- you can choose whether to use vibration or no with the chiming process.
- you can stop all software processing events by one finger click.
- Software will automaticaly activate itself and work again after any restart of the device.
- you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%.
- you can set an action like Zekr which can help Muslims remember their Lord every 5 minutes with a low volume sound saying God is the most Great. This option acts solely without dependency of the choosen theme interval since it have a fixed firing every 5 minutes (take it or leave it).
# How to install Cab file of TamerSpClock:
1- For versions prior to v1.4 you must download MortScript from the following link
(Version v1.4 & above already have it embedded inside software)
http://www.sto-helit.de/index.php?mo...=view&entry=65
This software acts like an environment for "TamerSpClock" to work. please note that "TamerSpClock" cannot run without installing this software.
2- Transfer cab to any place on your ppc using active sync or any other communicating software.
3- Choose whether to install to Device or to MemoryCard ,It is very important to choose the installation target location during the setup process corresponding to the version you downloaded whether it is on memory card or on phone. Note that program is hard coded ,this is why this point is very important for the program to work.
4-For Version v1.4 & above before running program ,press the icon named "RunFirst" prior to run the program (This acts as if MortScript Cab is installed)
This software had been tested on HTC Tytn & found stable ,Also can work on any windows mobile device.
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
painter_ said:
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
Click to expand...
Click to collapse
Added 2 versions ,one if you want to setup on the Phone Main Memory & the other for Storage Card.
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
zard said:
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
Click to expand...
Click to collapse
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
kino-kino said:
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
Click to expand...
Click to collapse
Kino-Kino .. first of all open the start menu programs ,you will find 2 folders ,one is named enable & the other named disable. now you are ready to open each and click what ever features you like to be enabled and whatever to be disabled.
At this time you are ready to go for the Theme selection which means at what intervals you want the choosen features to fire ,you can try the "01M" which means that the software will fire every 1 minute to execute the selected feature (or features if you choose others).
For example ,if you want only the signal detection feature ,go to disable folder and click all features to disable them all ,then go to enable and only click the shortcut named "Signal".
Once done .. every 1 minutes (since we choosed "01M") the phone will execute the selected feature (or features). in some phones the system cannot walkeup itself to execute the so called notification tasks at given times if it was in "Sleep" or "Deep Sleep Mode". So you can check your phone reaction to such notification tasks.
To make sure we are ready to go ,you must check first that your phone registry key when the phone is on and receiving signal looks like this :
[HKEY_LOCAL_MACHINE\System\State\Phone] the value of "Cellular System Available" must be 65
to do this test just download Fred Taskmanager free from this link
http://www.dotfred.net/TaskMgr.htm
once downloaded install it ,open it and go to RegEdit tab and go to [HKEY_LOCAL_MACHINE\System\State\Phone] & check for "Cellular System Available" number .. it must be (65) i mean the number between brackets.
If this is the case ,the program will correctly do the job. but if it isnt (may vary from phone to another) ,then this number must be modified in the software to read correctly ,Go to program installation folder " \Program Files\TamerSpClock\Data\Signal.mscr " rename the file "Signal.mscr" to "Signal.txt" then open it by any notepad or word ,then check the line "if(%PhoneActive% = 65)" and change the 65 to be like the number that you found for your phone in the normal signal state. Do not forget to rename it back once finished to "Signal.mscr".
Thanks
Thanks going to test on my lovly hima.
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
kino-kino said:
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
Click to expand...
Click to collapse
The reply is that you take the number between brackets on the idle state without conecting to any network ,because the idea as you can see from the code that there is 2 conditions must be fullfilled to fire the signal alarm which is 1- if the signal in the idle state be so and so and 2- in the same time signal drops to so and so ... Bingo ... fire
So ,now you got the idea of the code & can now modify it to fullfils your needs ,and you are ready to put your constants that reflects the state where you want spclock to fire. wishing this could help .....
timoz73 said:
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
Click to expand...
Click to collapse
Thanks, with Blackme, it works now.
dont work with my diamond
great sharing.
thanx.
Dynomite232 said:
dont work with my diamond
Click to expand...
Click to collapse
Dynomite232 ,Kindly feedback whether the mortscript program didnt run on diamond or the TamerSpClock itself. i didnt expect this to happen from the Diamond of a VGA screen since my software didnt realy have a User Interface Menu ,its only shortcuts. In addition that Mort do support any windows mobile device.
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Reply to Kino-Kino
kino-kino said:
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Click to expand...
Click to collapse
Kinio-Kino for your described situation the case will be as follows (copy & paste what is below between the # signs to replace what is inside Signal.mscr ,you can find this file inside a folder called Data inside the program folder inside Program Files)
###################################################################
ErrorLevel ("syntax")
SignalStrength = RegRead("HKLM", "System\State\Phone", "Signal Strength" )
PhoneActive = RegRead("HKLM", "System\State\Phone", "Cellular System Available" )
if(%PhoneActive% = 0)
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
if(%PhoneActive% = 8)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
if(%PhoneActive% = 1)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
###################################################################
You can now Download the latest version v1.03 ,I build a new user interface for this software instead of the icons .Before Uninstalling Do the process of "StopingAll" feature then make a new Install to v1.03.
.
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
kino-kino said:
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
Click to expand...
Click to collapse
kino-kino ,Welcome again & thank you for your feedback. The Cab file targeting the storage card have been updated in the main thread page.
you are asking now about 2 subjects ,the first one concerning the signal alert didnt fire during deep sleep of the phone ,i think you might try to make the speaking clock feature active along with the signal alert feature ,maybe it will wakeup your device to fire at the specified times, of course if its voice is annoying to you can try deleting the clock wav files but leave of course the signal.wav without deleting. I wonder this happens to you although my Htc Tytn wakeup and fire Signal Alerts at specified times.
The second question can be solved simply by downloading "HomeScreenPluPlus" from the following link:
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#Download
This software is free and have a feature in the second UI page of options that lock your device when the screen is off and vice versa ,see this pic for explanation.
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
hung_ng said:
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
Click to expand...
Click to collapse
yes i know hung_ng ,i made the blackme feature as a separate item in folder links so that you can assign its icon to a hardware button to be easily accessed so that when you are using your phone you can easily deactivate BlackMe.
This annoying feature (from my point of view as you eaxactly) is essential in many phones ,as the system cannot wakeup the device from a deep sleep to do the choosed actions. the blackme feature (also known as "ToggleDisplay=1") force the phone to wakeup to fire the action. if it is disabled many devices will fall in deepsleep without being able to wakeup. the last version 1.3 have this separate shortcut that i explained.
Another idea i made in my Tytn and made me feel comfortable is that i made my telephone sense when a specific window is open ,the blackme is disabled automatically and when i close this window it reverts automatically to be enabled. for example i made RescoExplorer2007 window when it is opened the blackme is disabled & serving me while i work ,and once i finish i close Resco and automatically blackme returns active and conserving my battery life.
Sorry for being long in my explanation but if you are interested in the idea ,i can make a version for you that is capable of deactivating BlackMe once a specific window is opened. i am not a programer ,i am an Architectural Engineer that once upon a time needed this software and didnt find a really satisfying one available all over the internet ,so i decided to learn Mort Script and i write a one satisfiying my needs and by the way i think that it might help other people who might need it as me.