Help. My Jamin will not send or recieve mms messages. I can access the internet just fine but, cannot download or send mms. Anyone know the correct settings and any things I might check?
Thanks
MMS
Launch MMS Composer
Click on TOOLS/OPTIONS
click on the SERVERS tab
TAP AND HOLD on screen and select NEW
Server Name: CINGULAR MMS (or whatever floats your boat)
Gateway: 66.209.11.61
Server Address: http://mmsc.cingular.com
Click OK
Click on Preferences tab
Connect Via: My Work Network
Connect to Server: Cingular MMS (or whatever you named it)
Check Retrieve Messages Immediately
Size Limitations: ? (mine is 100K)
No. of attempts: ? (mins is 3)
Check Download on home network only
OK
thanks for the help. I have it working now.
Related
Hi, please can somebody post the vodafone mms settings for the magician.
I've unlocked the mda which was a t-mobile to begin with. I've searched for the settings on the post but havent been successful with them.
Thanks.
Vodafone MMS Settings
Hi
here are the setting for the Vodafone MMS
Go to settings>Connections>Connections>My Work Network.
If you have an exsiste connection edit it if you do not make one.
Put this settings in they:
APN: wap.vodafone.co.uk
User Name: [email protected]
Password: user
When you done this you have to go to messaging and go to:
Menu>MMS Configuration>Servers
If you find a server in they edit it if not creat one.
In they put this settings:
Gateway: 212.183.137.012
Port Number: 9201
Server Address: http://mms.vodafone.co.uk/servlets/mms
Connect Via: My work Network
After that close the servers an tap on set As Default.
If by any chance it does not work change the gateway to this:
212.183.137.12
Hope this well help you.
Ciao
Gigino
this has worked, thanks
Hi,
I have everything working on my unlocked Cingular 8125 except for MMS. I received an mms message this morning but could not download it. I am currently on the Blue side ( ATT wireless) of cingular. Has anyone gotten this to work?
Thanks in advance!
if all the settings are correct then it should be fine. make sure u are trying to connect to the correct connection. go into MMS and click
menu - mms configuration - servers - click on the settings in there - make sure "Connect Via" drop down box is selecting the right connection. ie trying to use gprs from ur service provider. Hope this makes sense!
ben
I spent several hours yesterday getting this to work..follow the instructions at this URL https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB44046.html for the Siemens SX 66. However use the following information
Gateway: 10.250.250.100
Port: 9201
Max. Sending Size: 300K
Hope this helps
Hi Thanks for the tutorial. I configured everything as said and it works fine!!
Thanks once again.
I tried the settings listed for the 8125, but they didn't work ...
Gateway: 10.250.250.100
Port: 9201
Max. Sending Size: 300K
Do I need to change anything else?
Thanks for your help.
Okay, I got it.
Here's what I changed:
Gateway: 10.250.250.100
Port: 9201
Server: http://mmsc.mymmode.com
Connect via: (enter your internet connection here)
WAP Version: 1.2
Thanks for your time!
I tried to follow the steps here but I don't have the MMS connection because I did not run the extended cab. anyone know what I need to do?
Im on Vodafone pay as you go and I cannot get any MMS messages to send. It tries to send them three times but it wont send at all. My settings are as follows:
(MMS Configuration)
Retrieve messages immediately
Allow delivery report
Attempts before giving up is 3
Photo resolution is 640x480
(Server)
Server name: Vodafone
Gateway: 212.183.137.012
Port: 9201
Server Address: http://mms.vodafone.co.uk/servlets/mms
Connect via: My ISP (which works for WAP and internet access)
Sending size limitation: 100k
Wap version: WAP 2.0
Im sending to a Nokia 6610i and for some reason the messages wont send. Can you help me at all as its a picture I want to send my girlfriend.
Thanks!
Im starting to get pissed off with arcsoft. I installed molski's 1st edition which came with a very nice and new version of Arcsoft mms. I tired several different manual and automatic connection settings. I have two modems; Internet(internet2.voicestream) and Wap(wap.voicestream). The only way that version would send was using the wap modem, however the sent documents couldnt be opened, and incomming messages did the same thing. I picked up the ArcSoft MMS cab for WM6 and installed it with manual settings. The molski's default "T-Mobile MMS" server does not work with it at all, and no combination of settings enables it to send a mms.
Is there any alternative?
HMMM MY settings are as follows and I can send/recieve MMS.
In the connections application
Under MY ISP
name: T-mobileMMS
Modem: Cellular Line (GPRS)
Access point name: wap.voicestream.com
in the MMS configuration
Servers: TmobileMMS (the one I created)
Server name: TmobileMMS
Gateway: 216.155.165.50
Port number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect Via: MY ISP
sending limit: 250K
Wap version: WAP 2.0
And I have my registry wizard tweak set to allways connect to TmobileMMS.
This of course is Tmobile USA. Try those settings and see if that solves your problem.
Hi, just unlocked my HD and seems to be working with my O2 SIM, but all the settings for going online and sending MMS are not working, I get the message that it couldn't dial or get through with O2. The phone did an automatic set up for the O2 network, but it didn't set those to work properly.
I remember I had to enter manually all the server addresses and ports from O2 with another set I had a year ago.
Does anyone has a guide and settings that I have to enter to make it work?
Hey, I'm on O2 and my connection setup works fine, have you tried updating the connection setup database first?
The settings are as follows if you want to add them manually.....
3G (mobile web)
access point: mobile.o2.co.uk
user name: O2web
password: password
use server assigned IP/DNS
MMS (o2 active MMS)
server name: o2 active MMS
gateway: 193.113.200.195
port: 8080
server address: http://mmsc.mms.o2.co.uk:8002
connect via: o2 active/mobileweb (your choice)
send limit: 300k
wap version: wap 2.0
Hope these help, let me know if anything isnt clear!
Thanks, I had to do it manually that way yesterday, found it online. When I tried making the devices to update database automatically it wouldn't get the settings properly. I tried those settings you posted and also similar ones using a different port. 9201.
But it shows I am on Edge and G2 when I go online, and when it is on standby phone mode it shows full 3G.