Database Users

Alpine WiFi Manager

Does anyone know of an add-on software product that would substitute for the built-in wireless manager on the Alpine -- or is this a function of the Microsoft operating system?
I have a problem that when I go to my local coffee shop and try and pick up the wireless connection there, my device sees about 3 different available wireless networks. I have tried to click the preferred and non-preferred network box under the wireless manager settings, but I would like something that would help me specify EXACTLY what is the preferred Wi-Fi network to access (my coffee shop's). I don't see how the Alpine determines which network is the "preferred". It seems to get locked in to an endless searching for networks when there are 2 or more available networks to choose from.

try google 'wifi companion' works for me.
greetz
Maichel

Problems with Wifi Companion proposed by Maichelp
Hey,
I have used the wifi companion - nice software. Problem is that since I have been using it, I've been getting a Pocket PC Networking error message box every 10 minutes. THe network is fine during that time, but it still gives me the message. Never happened before WiFi companion. I saw a few others with the same problem with wifi companion. Might have to do a hard reset...
Anybody (e.g. Maichelp) have any suggestions short of hard reset?
Thx.

I dont have this problem. I dont know.
sorry

I'm sorry,
if i'm not mistaking!
Look in the windows folder on your device, there are 2 files called WIFISDK.DLL rename 1 to WIFISDK1.DLL and try again.
this wil do the trick.
greets Maichel

Weird WiFi/connection problems

He all,
I got some connection problems.
If i insert my WiFi card(sandisk 256+WiFi) my I-mate detects it and the antanna is displayed in de buttom of my screen but whenni go to my browser(internet) the message :Cannot connect with current conection settings. To change your connection setting, tap settings.
But i have no id how to change the settings to make it work with my wireless network.
Also the WiFi card couses to freeze the system every once and while.If i take the card out everything is okey again.
I got the I-mate jam with latest rom and radio drivers and I already installed the drivers of the WiFi card.
I hope you guys can help me out with this one
Thanks in advance
GreetZ
Nick

Nobody that can help a poor guy out ?
GreetZ
Nick

I had a similar problem with my XDAII, believe it is likely to be a known problem and related to the dual function of the card.
Have you tried the website for updated drivers?
The other options are to ensure that it you have the correct settings for Work or Internet to connect to.
I assume you are connecting to a wireless Access Point on a home based WIFI system, or are you trying to connect to public hot spots?
Contacted clubimate?

It started after I installed the latest rom version you guys think I migh work if I installed the older version?>
GreetZ
Nick

which rom are you referring to, an original manufacturer version or a cooked rom from this site?
if it is a licensed version, I would contact imate, have you installed the latest drivers from the hardware supplier?
I think you may have to go to your wireless settings and ensure connect to the internet is selected. also,scan local networks and ensure you are connecting to the correct network.
my problem when I got that message was cause it was connecting to the guy next door with wep key required.
are you able to connect to your host pc via wifi using a mapped network drive? or are you simply using a wifi hotspot?
if using a wifi hotspot, you should select auto connect to non-preferred networks.
start - settings - connections and choose wireless or wifi or network and have a look at what is actually happening in the network configurations. if you are really struggling still, try posting some screen shots of your network connection settings

sorry misread post

Just to end this topic.
I returned it to sadisk and they said it was the memmory function.
I couldn't get a new one form the store i bought it so I got my money back,
I now have a new one without the extra memory.
GreetZ
Nick

no WiFi success after ROM update on 8125 -- ideas?

updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks

danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?

left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont

Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars

i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!

danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?

kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.

did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.

kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?

no i didnt load anything
but i want this wifi to work! what the heck!!

try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars

summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.

I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.

eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks

I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.

no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.

Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again

i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?

Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...

kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.

War Driving using the Wizard

Hi all,
I have an i-mate k-jam and I was wandering what was the best software to automaticaly connect to any open wifi.
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Do you have a good war driving prog??? (Maybe one that can try to Hack the "password protected" network)??? In general, what tool do you use for war driving???
Thanks.

I agree this would be a neat idea, especially if used with a GPS/Google maps/etc. to mark open networks. Im in Boston, and open networks are ALL over the place.

I don't know if this is a good idea.. because many networks have no encryption but they re-direct you to a web page in order to register (they check the mac addr)
The best way is to use wifofum to find networks with ssid default, linksys, usrobotics, wireless, etc...
then you can connect and check your e-mails

I can add that even on a fast machine it takes quite some time to hack 128 WEP, Let alone WPA. You need to capture about a million packets if the encryption is 128 WEP, then you can crack the code, in about an hour on a 2 ghz lappy with 512 of ram (last time I tryed =)) 64 bit WEP may be possible on a pocket pc but I cant think of anyone who would still use that. That lappy could crack that in about 5 min, with a minimal amount of packets. Nice idea though :twisted:
Later; Lew

you don't need to crack anything...
I travel a lot...
I need max 10min walking with wifofum to locate an unencrypted access point that shares internet... with ssid default etc...
I was in amsterdam last week. I could find open APs anywhere (even inside the room of my hotel from a nearby house/company) !
And you are not breaking any law....
If you crack wep then you do...

many foolish people turn on WEP or WPA and use the routers default pass key, maybe a program with a list of default keys which it tries could be useful.
The defaults keys may vary from manufacturer to manufacturer but there are lists available on the internet.
R

ameriaux said:
Hi all,
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Click to expand...
Click to collapse
Try HitchHiker 0.4 beta1 (http://www.kasuei.com/hitchhiker/) it's similar to wififofum but it will connect.
No WEP cracking or dictionary attack though.
bye

risidoro said:
ameriaux said:
Hi all,
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Click to expand...
Click to collapse
Try HitchHiker 0.4 beta1 (http://www.kasuei.com/hitchhiker/) it's similar to wififofum but it will connect.
No WEP cracking or dictionary attack though.
bye
Click to expand...
Click to collapse
Tried this - unfortunately it kept dying shortly after conecting to an available network - went back to wififofum2 - admitedly it doesnt connect but it does a good job of finding networks.

.NET 2.0 and Hitchhiker
Hitchhiker says it needs .net 2.0, and that is 24MB! Does it really need .net and how much free space does .net require? Will .net install on the sd card?
Found a cab file here:
http://forum.xda-developers.com/viewtopic.php?t=51118&highlight=net
and it is 2MB. Would still like to know if this can install on the sd card, does it screw up .net version 1, which is needed for registry wizard, and is hitchhiker worth it?

bratag : i noticed that the Hitchhiker crashed due to trying to connect using Pocket MSN. Try registering your MSN using the pocket MSN.
I did it and it works find after that

Tried Hitchhiker in WM%
and it crashed incessantly, sometimes taking the whole device down. It was a nuisance to install .net 2, although it helps to use the cab file located at
http://forum.xda-developers.com/viewtopic.php?t=51118
and then to follow the instructions involving shutting off the today screen items, soft reset, shut down all running programs (I used memmaid for this) and then install the cab. That got .net to run. Then I installed hitchhiker, but it seemed to conflict with the default wifi connection. I was near a wep enabled wifi connection of my own. Hitchhiker would accept the password and even connect me, then crash. I could still reach the internet even after it crashed, although a couple of times I had to do a soft reset because the screen wasn't responsive.
There was a report elsewhere of a t-mobile / hitchhiker problem, so perhaps it is the T-Mobile customization.
Is this really better than the native wm5 program for finding wifi's and connecting to them? Actually, often I can't connect to unprotected wifis very well, which is why I tried this program, but with 5 MB for .net and frequent crashes, it doesn't seem worth it. I would appreciate your reaction, however, since I would like to be able to use voip (sjphone) in Europe and readily connecting to wifis would help.

Yes Hitchhiker crashed for me too...
Finally I use an old version of WiFiFoFum = 0.3.3 to detect hotspot but unfortunaltely can't connect with it...
Ive tried Wi-Fi companion but it's a shareware and can't make it work on my 9100.

Does somebody has a complete list of the default ssid (maybe depend on the country)... linksys, usrobotics, wireless...
I'm really interested in the routers in France and USA.
Thanks

Wifi Companion is a pretty nice app. It has a connect option and has trace route and ping utilities as well..
http://www.socketcom.com/product/SW1221-596.asp

I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).

PocketWinc the Special PC Mag Edition can be found here for free...
http://www.pocketpcfreeware.com/en/index.php?soft=1052

mine wizard cant connect on network after I use wififo,so I had to hard reset and backup it and now working ok

mapas said:
you don't need to crack anything...
I travel a lot...
I need max 10min walking with wifofum to locate an unencrypted access point that shares internet... with ssid default etc...
I was in amsterdam last week. I could find open APs anywhere (even inside the room of my hotel from a nearby house/company) !
And you are not breaking any law....
If you crack wep then you do...
Click to expand...
Click to collapse
In The Netherlands you are breaking the law, well according to the new system. But if you can't protect your open wifi you are probably 99.999 of 100.000 shure you will not be seen on the network

techspy said:
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
Click to expand...
Click to collapse
I tried installing this on my wizard, and it said it couldnt find a wifi adapter...

jmel said:
techspy said:
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
Click to expand...
Click to collapse
I tried installing this on my wizard, and it said it couldnt find a wifi adapter...
Click to expand...
Click to collapse
Do you have your wifi on before starting the app?

Cingular 8525 Wi-Fi issues

I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!

I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.

stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike

i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...

I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me

ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...

--

ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.

Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..