My usb cable detached during the rom update ... now it won't start and neither soft or hard reset works.
Please ... any suggestions
Plug it back in and re-run the update
It won't start so it makes no connection to active synch on the pc
Have you tried the boot loader mode. TO activate this mode, hold down the power button, lights button and press the reset button. The screen should go blank and have serial written on it. Once you plug in the usb, this will change to USB. Start the update again.
thanks both of you - worked and so relieved.
thought it was kaput!
Hi Everyone!
I got the following problem with my Charmer:
The previous guy, who had this phone, flashed it with a wrong ROM. The phone hangs at the T-mobile splash screen. I beleived that I can fix this problem, because I made this with my Charmer earlier. (Thanks for rmagyar's Charmer rescue kit). But at this time, when I put the phone into bootloader mode to use the rescue kit, there is no usb connection. It can't be charged, and the PC doesn't see the phone.
Any ideas, how to flash the rescue kit? Can I get back the usb connection?
I have same problem, anyone know?
try this, plug usb cable in PDA, press and hold power+camera button, tick RESET 5 sec and release reset button, but hold power+camera. if you see left side screen USB release power+camera button. it work for me, may be helped you!!!
I am sorry, I have this problem on my Xperia X1, but maybe someone from there have an idea...
Check:Start->Setting->NetworkConnection->WindowsMobile-basedDevice :
If Disabled than restart PC.
just installed a flash rom on my hd2, it started loading up properly and then resetted itself. now all thats being displayed is the green htc writing and the blank white background. hard reset doesnt work. it just stays on that blank screen. cant connect to computer. in a spot of bother. please please help.
thanks
turn off the phone, power on whilst holding volume down pressed, keep holding vol down until it boots to bootloader (three stripes) connect to usb cable, when white area says usb flash your rom again, or another rom.
Long story short, I was attempting my second flash. I followed the steps before and everything was going fine. Now right before i open CWM to install android the MAGLDR ( which is version 1.13 ) gets stuck at "123456GOGOGO".
Now i thought maybe i would start my proccess over but I cannot acces the tricolor screen. I wasnt able to do this in the beginning of my proccess either, when i pulled up my HSPL program on my desktop my computer entered the tricolor screen on its own and I proceeded from there.
Basically i have looked around and have found some ways out of the GOGOGO problem, yet I cannot acces the Tricolor screen using hardware buttons so I am stuck. And its not a hardware issue. In MAGLDR the Vrockers work fine and before I did anything the rockers were working fine in Windows 6.5.
Any Ideas? I have a feeling i got a pretty nice paperweight now.
the normal way to enter the tricolor screen is to turn the phone off then hold the volume down button and momentarily hit the power button.
Also, To keep from getting to the 123456 GOGOGO hold the power button while it is booting normally and you will get to the MAGLDR menu and there you can go to the AD Recovery and flash a new rom.
hunterthehuman said:
Long story short, I was attempting my second flash. I followed the steps before and everything was going fine. Now right before i open CWM to install android the MAGLDR ( which is version 1.13 ) gets stuck at "123456GOGOGO".
Now i thought maybe i would start my proccess over but I cannot acces the tricolor screen. I wasnt able to do this in the beginning of my proccess either, when i pulled up my HSPL program on my desktop my computer entered the tricolor screen on its own and I proceeded from there.
Basically i have looked around and have found some ways out of the GOGOGO problem, yet I cannot acces the Tricolor screen using hardware buttons so I am stuck. And its not a hardware issue. In MAGLDR the Vrockers work fine and before I did anything the rockers were working fine in Windows 6.5.
Any Ideas? I have a feeling i got a pretty nice paperweight now.
Click to expand...
Click to collapse
pull your battery,
put it back in,
hold down volume and power button,
and theres your tricolor screen
True i know about to Volume Down and power key to enter Tricolor, but for some reason with my phone that does not access the Tricolor, tried it many times.
Holding the power button while it booted made no difference.
*******I followed these steps for flashing my rom:*****
First, you need your files!
HSPL4
MAGLDR 1.13
Clockworkmod Recovery
Download a ROM of your choice, I prefer Hyperdroid
Unzip only the first 3 files, and place the ROM zip on your SD card.
So, here we go!
Remember to back up all of your contacts and any data stored on the phone that you want to keep, because you will be wiping windows off ENTIRELY.
HSPL4-
Plug in your phone.
Right click the HSPL4 file and select "Run as Administrator"
Go through the screens, then when it's connecting to your phone your phone will go into bootloader (red, blue, and white screen)
Select HSPL 2.08 when it comes up, hit next. Let it work.
It'll popped up saying "We hacked it!", and you'll see it on your phone. Click yes, then ok and you're done with this step! Phone will restart.
MAGLDR 1.13-
After phone's restarted, go to the MAGLDR folder, right click "ROM Update Utility", and Run as Administrator.
Checkmark the necessary boxes to continue through steps. Then click "Update", then click next through screens.
Once it starts updating ROM image, it taks about 2 minutes. Then click finish.
Phone will reboot into MAGLDR.
Navigate MAGLDR using the volume up and down keys. Use the green button to select (you may have to click twice).
(At this part in the video I uploaded the ROM zip, I'm assuming you already loaded it though, so skipping on).
Flash Clockworkmod_150
Scroll down on MAGLDR to option 5 "USB Flasher". Don't select it yet.
On your computer, go to the Clockworkmod folder, right click the DAF file and run as administrator.
Click next until it gets to waiting for USB.
Now press the green button to put it in the mode.
Text will start to appear on the phone screen, and the Clockworkmod flasher will do its work.
Once done, click finish, and MAGLDR will reboot. It may say something like "kernel fail", it's normal, don't worry about it.
Scroll down to number 8 "AD Recovery", select it.
It'll say Go Go Go Go, and then you'll be in Clockworkmod Recovery!.
****************************************************
BUT! at this point i get stuck in GOGOGO and i have to remove battery.
I JUST got this phone and really want to atleast get it back to Windows Mobile so i can restart my flash.
read the link in my signature...i was there and few of the folks succeeded after completing the process
Hoping it wouldnt come to this but looks like i dont have a choice, hopefully I get a try your method out tomorrow since the success rate looks promising, Ill get back with the results!
Try to reset your phone. Push the red little button on the back near the SD card
I have the HD2 open and have removed the flex cable at the bottom of the phone yet when i connect USB it auto boots so i have to power it down and to do that i have to connect flex cable. once i have the cable connected i power down then i hold the volume button and before i can restart the phoen autoboots from the USB being plugged in so im in a loop.
But i cant boot without the USB being in so Im in a pickle. Again
hunterthehuman said:
I have the HD2 open and have removed the flex cable at the bottom of the phone yet when i connect USB it auto boots so i have to power it down and to do that i have to connect flex cable. once i have the cable connected i power down then i hold the volume button and before i can restart the phoen autoboots from the USB being plugged in so im in a loop.
But i cant boot without the USB being in so Im in a pickle. Again
Click to expand...
Click to collapse
Try this:
- Hold down the vol_down button and don't let go.
- connect the usb, don't let go of the vol_down button
- should go into bootloader
- now let go of the button.
Nope that didnt work either, any OTHER reason my phone wouldnt acces the Tricolor screen? Ive tried everything 100 times.
I have been trying to flash 13 on my ADT-3, and I seem to have screwed up. Now all I get is a bootloop, and if I hold the device button on boot, I get the screen with the green Android/No Command.
Any suggestions to try to recover?
You'll need to have the usb cable connected to a computer in order for a button press to establish a usb burn mode connection. When the button press is done, if the device doesn't detect a usb connection, it will instead skip to booting to recovery.
then you need to hold the "only" button again ~ you will see the menu