i kept getting the country error thingy.. any solutions? thanks
Try to use the MaUpgradeUt_noID tool. I use it and never have country ID problem.
I had the similar problem
It's similar but I had it during the update of 171WWE to Chniese ROM.
I used MaUpgradeUt_noID tool and had added '[CHECKCEID_TYPE]=1' in RUU.conf before I excuted it, however when I run the program it also gave me 'countryID error' message.
Related
Hello all, I took the bull by the horns this morning and upgraded my PPCPE to 4.00.16 ENT T-Mobile US from JSummers ROM Kitchen.. I used the EXE installer and everything works fine.. I did have to upgrade form Activesync 3.6 to 3.7 once the upgrade was done..
Tonight I decided on trying some new options from the kitchen and downloaded a new EXE.. (still 4.00.16) just with EzWap2 this time..
But the EXE installer won't see the PPC anymore, even though active sync sees it and it syncs just fine. A DOS window comes up and says "ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype." The installer window still shows up though.. When I click next to install I get a windows popup box that says "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR - Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected." When I try again I get another dos window that says "ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. Error getting devicedata".
Am I doing something wrong here?? I've tried the SD method but apparently my SD card writer/reader isn't compatible with XDArit and it writes sucessfully but won't read the card back and the PPC doesn't recognize it as valid..
Help!
:shock: Have you read small notes beside the rom version which tell you to be very carefull before using rom 4.00.16. The notes telling you that after you flash with that rom version will unavailable to reflashing or downgrading with other rom version. Sorry, only this far I could help you cause I'm still a newbie to.
You can go back to a different ROM or the same with more stuff like your situation. BUT you HAVE to do it the SD card way. Search the forum and you will find more info about this. (SD card method)
Guys! I did something wrong. I upgraded my 3.16 ROM to the T-Mobile 4.00.21. It works fine, but I don't like 2003 so much. I want downgrade. I tried to use Programme A, but i always have this error message in a Dos windows:
ERROR: GetConnectionType
After that the program is always cancel. What to do?
An other error message
I found an other error message. "Cannot execute the remote communication program. Please make sure that the USB cable is propertly connected"
Yes. It's connected activesync is working propertly. Communication is ok. Only the upgrading software can find error.
you must use ActiveSync 3.7.1,
you need un-install it.
Install ActiveSync 3.7 or lower version
I don't think ActiveSync will work ... TMO ROMs do not accept the USB flashing ... you may have to use the SD card method.
Problem Solved
Thank you guys! I did the SD Card Method and It works fine. That was long time to solve to problem and learn how to use the SD card method, but now everything is fine. Thank you again!
OK- I think I have everything hooked up and downloaded on my desktop. When I run the SpecialEditionROM program, I get an error message saying
"Cannot find the ROM image to upgrade your Pocket PC. Please DL and try again"
I have the OSImage tool from this site- Is that what I need? How does it work? Also 'coldboot' and 'hardboot'- turning off power supply or actually pulling out the battery?
Thanks again-
:shock:
PC Putz
GOT IT!!!
I dont't know what I did differently, but for some reason the program worked flawlessly the umpteenth time I tried it. Maybe it just took pity on me. XDA-DEVELOPERS ROCK!!!
I’m stuck with a minor problem and have spent more than a week trying to fix it. :?
STORY
To replace an O2 3.20 Eng on PCC 2002, I have cooked a French Rom based on 3.16 Qteck and included the freeware I liked, one of them being a freeware named POI (Point Of Interest) to be used with Tom-Tom Navigator.
ORIGINE
My problem is that I think, installing POI on ROM, was a silly choice of me as I cannot save any modified settings of POI such as setting for Speed cameras. :evil:
PROBLEMS
Pb N° 1. : I cannot save my POI settings. I get no really error messages, but all is gone next time I open it. Does any one have a clue?
PB N°2: As I had no clue, I decided to cook a French ROM without POI in it. But I failed to reinstall the newly cooked ROM after downloading the EXE file and running it, my PC opened DOS windows with an error message saying ERROR UNSUPORTED LANGUAGE ‘FRA’ prior to opening the Program A window. Then Program A gives me an Error 007 No Rom Image File … Cannot find ROM image to upgrade you Pocket PC.
PB N° 3: I decided to build an English ROM on 3.20 UK. as it seemed that French language may be the source of PB N°2. But after downloading it and running the exe file on my PC , a DOS windows opens and close then nothing would happened.
PB N°4: I decided to use XDAtools to flash my original XDA ROM (saved in the first place on my PC) back to my XDA, but XDAtools refuses to write to my XDA memory through Program A saying error opening c:\...\English\ for writing Access refused. Error opening the target device. “
I have no idea what XDATools tried to open so I cannot either go that root neither.
I now quite perplex on how to solve question N°1, or at best getting BP N°2 to work.
Any hint :?:
can anyone help? i was trying to update the software on my m500 when halfway through it came up with an error message saying it was the wrong country, i then tried to run the file that overcomes this but it will not run it comes up with Ruu.dll cannot be found.
Since then i get an error message saying no gsm when the phone reboots and am unable to use most of the programs
HELP PLEASE
You need to download from the file MaUpgradeUT_noID.exe from the ftp. There are several threads in the Magician Upgrading forum with tutorials.