Related
Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
Hi all, sorry to bother you with this one!
I got my O2 XDAII unlocked and used it with no drama at all with my Vodafone SIM. I then put the GPRS settings in and it worked fine with MSN Messenger and IE etc. I then put the MMS settings in and started sending and receiving picture messages perfectly. :lol:
The problem, i hear you ask....
Well, I got TomTom 3 and a program called POI Warner which is used to alert me of POI's (read, speed cameras :wink: ) and it wanted to connect to the Internet to update it's database. It always used to try once i'd dropped the XDA in the cradle. As something wasn't right somewhere, it used to lock up the XDA until it gave up trying and then it would release the XDA so that i could use it again. This all seemed to be because of the Activesync passthrough settings. :?
I set them as I should have (after reading on here what to do - thanks!) and then it worked fine. Still with me...??????
It seems that i can't send picture message anymore :shock:
I have all the settings from the other posts on here but somehow, my settings in the connections screen have gone loopy.
Can someone on Vodafone PLEASE PLEASE let me know what settings they have in the connections screen, be it two sets (My Work Settings and another) or (Vodafone GPRS and Vodafone MMS - as i used to have). And when you click the advanced tab at the bottom of the connection screens, which programs do you have for 'Programs that connect to the internet should use' and programs that connect to a private network should use'???
when you edit either of these, it comes up with ANOTHER connection screen - what you have got in there??
This is on top of the Server mentioned in the MMS composer screen that needs another mention of the same server in there!!!
If I can get this working with someone's help , I hereby promise to take a screenshot of every screen I have and put an idiots guide to getting this working up on the Web should I need it again!!
thanks in advance Guys!!
Firstly to clean things up a bit it'd look in the registry under [HKLM\SOFTWARE\Microsoft\ConnMgr\Destinations] and remove all but:
'The Internet'
'Work'
'My Work Network' - or whatever it was renamed to
'My ISP' - or whatever it was renamed to
Then resetup all the connections.....
Here are the settings I have, which work perfectly.
Programs that automatically connect to the Internet should connect using:
Vodafone Internet (My ISP renamed)
Programs that automatically connect to a private network should connect using:
Vodafone Live! (My Work Network renamed)
Settings:
Vodafone Internet
Under modem...
Name: Internet GPRS
modem type: Cellular Line (GPRS)
Access Point Name: Internet
User name: web
Password: ip
No extra settings under advanced
Vodafone Live!
Under modem...
Name: Vodafone Live! GPRS
modem type: Cellular Line (GPRS)
Access Point Name: wap.vodafone.co.uk
User name: wap
Password: wap
No extra settings under advanced
Under Proxy Settings...
Both boxes ticked.
Under Advanced...
WAP: 212.183.137.12 : 9201
MMS Settings:
Connect via: Vodafone Live!
Under Servers...
Vodafone MMS - just what I called it (should only be one in there)
Gateway: 212.183.137.12
Port number: 9201
Server address: http://mms.vodafone.co.uk/servlets/mms
& I put my sending size as 100K - but its your choice.
Sorry if this has been answered before (but I can't find a solution).
I have loaded latest o2 rom in corporate mode and entered the MMS config but all I get is :
"Unable to send your message(s). Your message(s) will remain in the Outbox."
The settings I have are:
For MMS settings
server O2UK
193.113.200.195
port 9201
server address: http://mmsc.mms.o2.co.uk:8002
I have a wireless connection at home and am not sure what MMS should connect through (connect via choice in settings).
Anyone have an idea or had the same problem?
Steve
i have had the same problem. never figured out how to get it to send, despite trying lots of things in connection settings, so gave up in the end.
would be interested to hear the answer tho! )
Use your gprs operator settings.. You cannot have any other connection...
hey here are the O2 settings that work for me to enable sending of MMS Messages
in MMS Configuration under servers i have
Server Name O2UK
Gateway 193.113.200.195
Port number 9201
Server address http://mmsc.mms.o2.co.uk:8002
Connect via My Work Network
Then in settings under the connections tab click on Connections
Add a new modem connection under My Work Network
This should be called something like o2 Active connecting using Cellular Line (GPRS, 3G)
Access point wap.o2.co.uk
username o2web
password password
leave everything else as default.
This should let you send MMS Messages, it works for me!
Thanks mjames_84 those settings are working now.
Hope it helps others too.
Steve
ncruz said:
You cannot have any other connection...
Click to expand...
Click to collapse
ah... this might be the problem - i do
i already have a connection setup in both "My Connections" and "My Work Connections"
is there no way around this?
tried deleting the other connection in "My Work Connections" and yup - MMS sends fine now. not sure what i'll do when i need that connection again, but for the moment - yay, MMS fun
One thing I have noticed ....
Even with the settings above - I cannot get MMS to send with "WAP 2.0" selected (default setting) under MMS configuration
As soon as I select WAP 1.2 they send straight away
Anyone else noticed this ?
Hmm I'm not 100% sure on this, but I think if you want to use WAP2.0 you have to specify a different port. I seem to remember that when using personal mode instead of corporate it was set up to use WAP2.0 and the port was different to the settings I had previously written down from my old XDAII....I still used the settings from my XDAII cause I know that they worked.
Can anyone (mad enough) running the full personal installation with o2 Active find out what port is used my default when using WAP2.0 for sending MMS Messages?
Port number for WAP 2.0 is 8080
Thanks Lord Buckingham
Does anyone know what the difference is between WAP 1.2 and 2.0? Is 2.0 faster? better? more secure?
Lord Buckingham said:
Port number for WAP 2.0 is 8080
Click to expand...
Click to collapse
But even with port 8080 selected I still can't send MMS with wap 2.0 selected - yet with 1.2 I can send them via port 9201 or 8080 ! the port number was the first thing I changed when I had problems , from the default 8080 to 9201 (which seemed to be the obvious choice ) so it seems that wap 2.0 just doesn't work for me
very strange ! I'd be interested to know if anyone is using 2.0 successfully (just out of curiousity)
I sent one near the start, but had to reduce the pic size below 100K or something, if I recall....
Anyone confirm what the limits are on O2?
I still cannot get it to send using any of the above settings or the original ones that o2 active install. If I use the o2 3g contract sim that came with it then it sends with NO PROBLEM whatsoever, BUT I don't use my contract sim ever, I use a o2 online sim which I have used for years.
Any ideas?
Is the settings different for PAYG and for CONTRACT ?
If so then I need the settings for PAYG please guys, can you help?
if you are using an old "on line" SIM I suspect that it might be one of the old Genie internet SIMs, so the settings may be different. Try setting the device up as pay and go, so change the APN to "payandgo.o2.co.uk" , username "payandgo", password "password", all the other settings should be the same. If this fails, climb into a large bottle of red wine, sometimes its the only way :wink:
Hey, i couldnt get it to download a message and the fix above worked.
Im assuming that as it connected to the 3g network that it charged me for d/ling the message yeah?
can it to be set to do it when its synced with the computer or in a wifi area?
Cheers
JAmes
Got mine working with WAP 2.0 !!
The settings I have are:
Server: O2UK
193.113.200.195
Port 8080
Server address: http://mmsc.mms.o2.co.uk:8002
Connect via: The WAP Network
Hi Guys!
First time poster here
I've got a T Mobile MDA Compact which I have had unlocked and I would like to put my o2 sim card it. I can make calls and send txt messages, however I was wondering how I can make it completely O2, if that makes sense?
Currently I cannot send MMS messages and I've spent hours trying to edit the connection settings to allow it, but it just won't work.
Is there any thing else I can do?
Best Regards,
Go Messaging>MMS>MMS Configuration
Servers Tab.
Server Name - O2 MMSC
Gateway - 193.113.200.195
Port - 9201
Address - http://mmsc.mms.o2.co.uk:8002
Connect Via - My ISP
Sending Size 100k
WAP Version - 1.2
Thats what mine is set to, Connect Via may depend on under which profile all the GPRS settings are entered.
Hey folks,
Received notification of my first MMS since getting the Tytn. I selected "Download" and also "Send/Receive" several times, and it won't download the stupid thing.
I'm on Cingular, and here are the settings I entered manually, per Cingular's website:
Gateway: wireless.cingular.com
Port: 8080
Server: http://mmsc.cingular.com
Connect via: (I've tried "The Internet" and "Media Net" here)
Sending size limit 250k
WAP version: WAP 2.0
The following items are checked in Preferences:
-Retrieve Messages Immediately.
-Save Sent Messages
-Allow Delivery Report
Attempts before giving up: 4
Photo resolution: original
The file being sent to me is only 109k so I don't think it's too big by any means.
Does anyone on Cingular have any different settings?
Thanks.
Cingular MMS Settings
Hello, this is my first reply on this board so here it goes.
i had plenty of problems at first with cingular and mms working together untill i tried these settings which are pretty similar to yours besides the port #.
Server name: Cingular MMS
Gateway: wirless.cingular.com
Port Number: 80
Server address: http://mmsc.cingular.com
Connect via: My ISP
Sending size limitaion: 250k
WAP Version: WAP 2.0
Now a couple of explanations. ( to the best of my ability. please feel free to correct.)
server name: this is either the default name or you can create a new server name of your choice. I have gone as far as deleting the default server and creating the new name of Cingular MMS. Or for example you could put Joe Blows Server Or JBS for the new name whatever you like.
Gateway: has to be as is. (as far as I know.)
Port number: Although ther are several port numbers to use I have found that this number (80) is what actually made everything work.
Server address: has to be as is. (as far as I know.)
Connect via: whatever connections you have to connect to the internet you should have mms connect the same way.
Sending size limitation: 250k is the maximum. (If there is any way of getting mor plese let me know.)
WAP Version: I dont know the difference between WAP 1.2 and 2.0 except 2.0 sounds better.
Also under prefernces i have.
Retrieve messages imediately-checked
Download on home network only-not checked
Save sent messages-checked
Regect all messages-not checked
Allow delivery report-checked
Allow read report-not checked
Attempts before giving up-4
Photo Resolution-Origional
The only setting that I would think of be crucial is download on home network only. (for cost reasons. depending on plan. I guess.)
Other than that just make sure the little red arrow is on the server that you just configured or created and you should be set to go. if any one finds any of this info false please feel free to comment, otherwise this is what I have found to work on my htc tytn here in the usa on cingular and cingular UMTS. GOOD LUCK.....
correct, should be port 80, thats what mine is, and my max sending limit is 600...
here is another thought, why not extract the cab from the cingular extended rom that installs the MMS settings?
you also need to go thru the Cingular proxy server. set up the proxy server under Settings->Connections->Edit My Proxy Server for the connection you are using. under Advanced change HTTP to wireless.cingular.com also make WAP & Secure WAP 66.209.11.61 (leave the ports as they are).
The settings from Cingular website (https://www.cingular.com/support/deviceTutorials.do) is correct. However, I made 1 tweak:
In the "Connect via:" box, I put "My Work".
I created an additional entry in the "My Work Netwokr" (Start -> Settings -> Connections -> Connections) and put wap.cingular as the APN.
This way, when an MMS need to be sent or downloaded, the device will drop the 3G / GPRS connection and connect via the MMS setting. Afterwards, it'll connect back to the 3G / GPRS connection.
mine does that with the default setup, i stay on my isp, but if i send or recieve it automatically drops the connection and connects via media net, once its done it goes back to my isp