Related
Hi guys,
I just tried to upgrade to the latest o2 Exec ROM, followed all the instructions to the letter ... then the dialog box that says "getting device information.... don't unplug, bla bla" came up and stayed the same for over 70 minutes and decided something isn't right, so I unplugged it.
Now, my exec only shows "USB v1.00" screen ... can't turn it off, and hard reset can't restore anything. It appears my ROM has already been zapped clean ? ...
Arrrggghh, this is driving me nuts. If anyone can tell me how I can get things back to normal, I would be eternally grateful
Chris
the same happened to me.
Connect the usb cable again and try running the setup wizard again.
1) Disconnect your Universal from the cable.
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY.
4) Connect back your Universal via cable.
5) You will hear the connection sound from your computer.
6) Run the install application again.
7) Make sure you DO NOT DISCONNECT the cable this time.
8) RELAX!!!!!! and wait for the update.
I had same problem but this is what I did
1) Hard Reset
This screen pops up
Press0 to restore
Factory default
Press X to exit
2) I pressed X
3) Plugged in USB cable
4) Voila, windows recognises new device, when driver is installed pressed X
ran software utility (rom upgrade) again
All is working, Panic over PHEW!
Phheewwww ... thanks so much you guys, really appreciate all the detailed instructions ... it's upgrading as i post this ... for a moment there, i thought i would have to ship this back to o2 ... He hee ... you guys are the greatest ! :lol:
So guys now that you all have upgraded your universals, is it worth the update ?
I've been running my current one in Basic Mode since getting it and have not experienced any problems yet.
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
fince120 said:
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
Click to expand...
Click to collapse
Which themes?
screen switching is like lightning, definately an improvement.
Overall Id say it seems quicker loading menus
(eg start>programs, Start>settings etc)
I think it was worth it although i shat myself when the upgrade went wrong.
Tut Tut o2, wtf was that all about?
hi guys, i have follow the instruction, and it is not working for me.. any others ideas
thanks
My Method:
1) Connect your Universal from the cable. (Whole step not need disconnect the cable)
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3)This screen pops up
Press0 to restore
Factory default
Press X to exit
4) I pressed 0
5) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY. Wait about 15 seconds!
6) You will hear the connection sound from your computer. (If it appare a wrong connect device message on computer, then retry from step 2 to step 4. This step my need to try many times until hear the connection sound from your computer) [Some times I had repeated three steps twenty times then can success!]
6) Run the install application again.
7) Finish & Reset.
i have done, the step. Due to frustration i have remove the active sync and install a new one. might be this step will no longer use.
thanks any way. is there any other suggestion?..
upgrade completed but still screwed
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Re: upgrade completed but still screwed
leslie lee said:
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Click to expand...
Click to collapse
see your pm
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
leslie lee said:
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Flashing ok for 3rd time also using MaUpgradeUt noID...
I must convey my sincere thanks to u Sirius n Mwang,argh for trying to help.
After the flashing finished I took the dopod off the mini usb cable n reset...reverts to bootloader mode.
tried cold boot ie..on/off button n reset same time..same result
tried hard reset...same result ie back to bootloader screen
am now flashing it for the 4th time(tried not to used MaUpgradeUt noId but come out with ERROR 120 n cannot even flash)
what shall I do?????
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
simba said:
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
Click to expand...
Click to collapse
Thank u Simba
I shall try your suggestions and wish me luck for xmas
many thanks n very much appreciated..
thank u simba
New year is on d way....
BINGO..... yes I made it...
as simba suggested I download the UNI DOPOD rom113.36..extract the executable files ie.
!. Enter BL
2.GetDeviceData
3.RUU.dll
4.UI.dll
5.RUU.Conf
6.MaUpgradeUt noID
into a new folder ..add in the radio file from either rom113.188 or 113.36
and then execute/run MaUpgradeUt noID file......IT WORKS
It therefore may means that DOPOD900 may require the DOPOD EXECUTABLE FILES (so as not to have the same problems as I had over xmas) listed above to upgrade either the CE rom, radio rom or extended rom..
It definitely had been a very interesting xmas...the freeze is finally over n a Better time awaiting, better days ahead n a better YEAR is around d corner...Happy New Year to everyone
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.
did you try a hard reset ?
Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.
Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.
I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.
Can any one help me in this regard please.
I am having the same problem, but my phone is not sim-locked.
I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated
Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.
ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!
Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck
Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.
mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks
(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452
hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin
Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.
collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)
Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.
just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
wfreed said:
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
Click to expand...
Click to collapse
Have you tried to install another ROM? with a different Bootloader
Battery?
Check the Wiki, there is a lot of usefull info there
Good luck
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
wfreed said:
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
Click to expand...
Click to collapse
Hi
here you can find one: http://forum.xda-developers.com/showthread.php?t=409966
The other questions I am no the master, so let´s learn form them
Cheers
Thanks a lot all yours!!
I solve my trouble reflashing my WM5 rom...
I used the Jwrightmcps Crossbow ROM Update 2.12.08 WWE, very fast and very stable WM6 rom! Realy a amazing work by our friend Jwrightmcps!
Including, I want suggest here that all those that still suffering in WM5 (living slowly with crashes, troubles, crashes, more troubles and this poor and slow system), try reflash your HTC with a rom like this... my device reborn!! It was dead more now is alive!!! And much more fast and stable! Before it is slowly my old Jornada 720 (206MHz), but now it realy seems have 520MHz!
Thanks a lot for all.
The link for this excelent work is HERE:
Jwrightmcps Crossbow ROM Update 2.12.08 WWE
(Download the apropriate rom to your device, folow the instructions and EnJoY!! Be HaPpY!!)
This rom don't supports 8GB SDHD cards, but download and Install 2 cabs below and it will support it:
CAB01 - SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_Fre ePK.cab
CAB02 - Signed_Storage_Settings_App.cab
Special thanks to big_quads for this solution!
Hello guys,
First of all I'm sorry for creating separated thread with problems, but i want to post them clearly and in one place. I hope that you can help with this, cause I'm trying and trying with many many ways, and nothing works for me . So lets start:
I have succesfully installed Windows XP on my machine. It works perfect.
But there are some problems ofcourse
First of all, the snapvue (I've installed liberated ROM) won't run. Nothing works. There is only black screen and 3G led is blinking. The only way I can run snapvue is to drain battery to 0%, and then plug the adaptor and wait a second. And the only time, that snapcue is starting - its when bios saying that i have 2% battery and it will close in... etc etc. Anyway, for some reason its hanging up after a while. So again - its not working.
I've tried the comonex way many many times with no success. There is only black screen all the time.
And now: I've tried it today again, and when I'm starting mtty, there is no USB anymore.
I've done it before, so please, don't tell me, that I'm not following the instructions .
I don't know what to do. Because of that - there is no sound in Windows, and anyway i need SnapVue side to run some 3G modem .
Now the OS side:
Wlan won't work. When I'm trying to install the driver it says: "Error 10, device can't start" or something like this.
I've tried all the solutions provided here without success. What should i do, and what I'm doing wrong?
Thanks.
Cheers,
Chris
SnapVue Side
Did you Hard reseted your snap vue ?
tryed to install HardSPL ?
What about taking out the battery and replug it (dont fire os only snapvue)
Is it working then ?
greets
kristoff_sz said:
First of all, the snapvue (I've installed liberated ROM) won't run. Nothing works. There is only black screen and 3G led is blinking. The only way I can run snapvue is to drain battery to 0%, and then plug the adaptor and wait a second. And the only time, that snapcue is starting - its when bios saying that i have 2% battery and it will close in... etc etc. Anyway, for some reason its hanging up after a while. So again - its not working.
Click to expand...
Click to collapse
Hello, for this.. I will keep on cmonex things.
First : are you able to use ECShift.exe ? if yes... try "ECShift.exe -gm" (without quotes) to see if it works (first) and what is the value (0 or 1). If it is 1, you are in the bootloader and need to go out of this using "ECShift.exe -mode0" and then soft-reset snapvue with "ECShift.exe -reset".
You might say that you already do that... maybe yeah. but you need to see exactly why it is black, is it black because of stopping to display, or because it enters bootloaders.... etc..
Second : if you get access to WM, go to the snapvue settings button (if you still have the snapvue today plugin) and go to power -> advanced .. there you should uncheck both if they are checked.. just to try that the issue does not come from there.
Hope it will be better for snapvue side. I let you answer that, and I will see later for the following issues.
I've tested -gm already before and it shows good vaules. But when I'm trying to go to SnapVue Side - there is nothing. Only black screen.
One more thing:
I have HardSPL already,
I've flashed liberated ROM, Flashed gullums ROM, and no go.
kristoff_sz said:
I've tested -gm already before and it shows good vaules. But when I'm trying to go to SnapVue Side - there is nothing. Only black screen.
One more thing:
I have HardSPL already,
I've flashed liberated ROM, Flashed gullums ROM, and no go.
Click to expand...
Click to collapse
well "good" values does not mean anything to me... I guess you mean "0" all the time (because you don't need to go in the bootloader).
and what do you see if you type use the -reset command (with snapvue in mode0) in snapvue? Do you see the HTC screen? (white) or nothing at all.. always black?
koala996 said:
well "good" values does not mean anything to me... I guess you mean "0" all the time (because you don't need to go in the bootloader).
and what do you see if you type use the -reset command (with snapvue in mode0) in snapvue? Do you see the HTC screen? (white) or nothing at all.. always black?
Click to expand...
Click to collapse
Good values means:
When i type -bl, then -gm it shows mode 1,
-mode0 then -gm - shows mode 0...
After reset its always black.
Now I cant run it even on this warning screen
Only 3G icon is blinking. Rest is black like ***hole
kristoff_sz said:
Good values means:
When i type -bl, then -gm it shows mode 1,
-mode0 then -gm - shows mode 0...
After reset its always black.
Now I cant run it even on this warning screen
Only 3G icon is blinking. Rest is black like ***hole
Click to expand...
Click to collapse
mmh.. I'm no help for that.. sorry
okay you see the 3G icon flickering,
What kind of shift you have x9500 ? x9000 ? x9510 ? as you described when battery is low the full screen is visible, you tried things like realVGA ? what version of hardspl you installed ??
Greets
Neutron83 said:
okay you see the 3G icon flickering,
What kind of shift you have x9500 ? x9000 ? x9510 ? as you described when battery is low the full screen is visible, you tried things like realVGA ? what version of hardspl you installed ??
Greets
Click to expand...
Click to collapse
Hello,
All i can find is "Clio110"
I didnt try anything like this. I can flash new ROM sometimes, but it just give nothing.
The HardSPL is latest one... (first one I've flashed anyway )
kristoff_sz said:
Hello,
All i can find is "Clio110"
I didnt try anything like this. I can flash new ROM sometimes, but it just give nothing.
The HardSPL is latest one... (first one I've flashed anyway )
Click to expand...
Click to collapse
clio110 stands for X9500.
you should try a tool in vista which display the WM part... I don't remember the name but I know that there exists at least one. I wish I remember that... grr.. was using it before my touch left me. and this utility allows to have a mouse in WinMob which is pretty nice ^^ (but useless IMO).
I will try to ask cmonex about your issue, but it seems that something is wrong.. but why? "hum"... you should try to flash cmonex's (rom and see what happens... his roms are the most secured and less modified and if it does not work with his rom, then it is coming from something else which might be harder to solve.
koala996 said:
clio110 stands for X9500.
you should try a tool in vista which display the WM part... I don't remember the name but I know that there exists at least one. I wish I remember that... grr.. was using it before my touch left me. and this utility allows to have a mouse in WinMob which is pretty nice ^^ (but useless IMO).
I will try to ask cmonex about your issue, but it seems that something is wrong.. but why? "hum"... you should try to flash cmonex's (rom and see what happens... his roms are the most secured and less modified and if it does not work with his rom, then it is coming from something else which might be harder to solve.
Click to expand...
Click to collapse
Can I ask you to provide link to ROM again? This one is cutted out .
Thank you for your help!
kristoff_sz said:
Can I ask you to provide link to ROM again? This one is cutted out .
Thank you for your help!
Click to expand...
Click to collapse
oups sorry here is the rom .. I have copied the link in shorter form instead of the real link sorry
koala996 said:
oups sorry here is the rom .. I have copied the link in shorter form instead of the real link sorry
Click to expand...
Click to collapse
Thanks.
Ok, new update: I've managed to flash that rom, but again - black screen always But there is one more thing:
I've run SnapVue (as I stated before - when there is "Battery low, device will turn off in...), and then started Windows - well, i had sound for a second, and I could change between XP and SV, but in a second - black screen again and under XP this message:
You just plugged device into audio jack.
And nothing. Sound is dead and SV side is dead... damn.
try flashing stock 1.30.405 then... I posted that somewhere (do a search for my posts in shift forum)
cmonex said:
try flashing stock 1.30.405 then... I posted that somewhere (do a search for my posts in shift forum)
Click to expand...
Click to collapse
Thank you for suggestion.
I've done as you stated... but nothing changes. At normal boot (after taking out battery), WInMo side wont work.
Any news in that thread anyone?
Did you check the WM power settings?
Did you check that the WM Advanced Power Settings was not switching the WM side off? Read my last post at http://forum.xda-developers.com/showthread.php?t=440437
You will need to use the Vista reset SnapVUE utility first to start it up first
*EDIT* Just re-read your first post and saw that you are running XP, oh well - if you can quickly start SnapVUE then check your power settings. Good Luck!