Hi,
I send my first W2003SE application.
This is a free application (it's a beta version written in c#, and requires .NET CF) and is capable to detect a change in the phone owner identity via the next comprobations:
- The user can be configure a list of preferred SIM Cards
If the inserted SIM card is not any of the owner preferred sims the application send's a sms to a configured phone (including a configured text and the SIM identifier of the inserted card)
[Obviously, the application sends the message without prompt for user msessage send confirmation and not stores the sms at the outlook tray's]
[obviously, if the new user inserted sim is a prepay sim and the credit was 0, none sms is sended]
Additionally, the application show's (if configured) a balloon notification.
- The application test (if configured) the value of the Owner identity and if changed sends a sms and / or shows a notification...
Please, test and send me your comments...
regards
Also tested it for WM05?
Nadavi :?:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
frigit said:
Also tested it for WM05?
Click to expand...
Click to collapse
sorry,
i have a qtek s100 with w2003se...
please, test in w2005 if you have... and send me your comments...
thank's
Seems to be working on my xda2i - no slow down of unit and no lock-ups tho only second day of use.
Thank you Bartito
Sorry but doesn't work on my MDA Vario.
First I had to install OpenNet Cab and after that I got an error that it couldn't load some NotifyIcon.
I was in a hurry so I didn't check that good, I already uninstalled the program but I will sure will try a new update, the idea is real good
bartito said:
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
Click to expand...
Click to collapse
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards[/quote]
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul[/quote]
Hi,
I have read more threads in this forum about the mode to make your owner rom.
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
frigit said:
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
Click to expand...
Click to collapse
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Thank's
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
molski said:
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
Click to expand...
Click to collapse
Ahhh!
It's possible.
I have tested only in w2003se.
I don't have a w2005 pocket...
sorry
That's too bad....for now!
I will stay and follow this topic, would love to see this work on my Wizard.
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
molski said:
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
Click to expand...
Click to collapse
This project was freeware for every...
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
frigit said:
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
Click to expand...
Click to collapse
Please,
install the OpenNET CF assembly libraries (follow this link: http://www.opennetcf.org/fget.asp?file=SDF14CABs.zip&dir=/bin)
Thanks
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Bartito for President!!!
inquartata said:
Bartito for President!!!
Click to expand...
Click to collapse
No, no... i idore my anonymity.
please, send me any comment or bug.
thank's
inquartata said:
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Click to expand...
Click to collapse
Do you have a Wizard (with WM5), or some device with WM2003?
Tnx!
Sorry if there is an answer somewhere already, but I have been looking around for 20 minutes and I'm giving up and posting a thread. I have like five programs that won't uninstall when I go into the settings-->remove programs application. It comes up with a message that says "XXXX was not completely removed. Do you want to remove it from the list of installed programs?"
Has anybody had this also? How do I get it completely off my phone/get the memory back?
One more thing, I have a program called "AA AA" and I know for sure that I didn't install a cab with that name, so what the hell is it? I'm a noob with WinMo so sorry if it's simple **** haha.
Thanks in advance
Caribeanbreeze22 said:
Sorry if there is an answer somewhere already, but I have been looking around for 20 minutes and I'm giving up and posting a thread. I have like five programs that won't uninstall when I go into the settings-->remove programs application. It comes up with a message that says "XXXX was not completely removed. Do you want to remove it from the list of installed programs?"
Has anybody had this also? How do I get it completely off my phone/get the memory back?
One more thing, I have a program called "AA AA" and I know for sure that I didn't install a cab with that name, so what the hell is it? I'm a noob with WinMo so sorry if it's simple **** haha.
Thanks in advance
Click to expand...
Click to collapse
For programs that say they didn't uninstall completely, the method I use to get them out is this:
1) run the cab again, the same one you used to install a/the app in the first place
2) when it gives you option or error dialogs, just click "ok" or "yes" to all of them, to allow it to go through what looks like another complete install process (yes, it's odd, but this is how to do it).
3) when it's done, soft-reset, and then you should find that there's no more trace of the app in your uninstall list.
Don't ask me how/why that works, but I've used it in many instances for just that reason, and it's worked every time I tried it.
As for that "AA AA" app, I've certainly never seen a cab that used that name (fyi, the name in the uninstall list doesn't necessarily match the name of the cab file...only if the person creating it set it up that way). So...I'd just say uninstall it, and see if any apps/links are missing then.
This thread is closest to my problem,so I'm asking here.
I cant uninstall ANY of my programs, I have tried the usual method from the remove programs section in Settings. I get same error as OP.
When that failed I then try to just delete the program folder from program files, using file explorer, but get an error saying 'Access is denied. Be certain the folder isn't in use and not write protected'
At first I thought I had a memory card problem, but its the same regardless of where the program is installed.
I also tried to re-install the programs from their cab files as described above, but get an 'unsuccessful' message.
I cant rename any files anywhere on my device either.
I know a little about write protection, but cant figure out what my problem is or how to fix it.
I hope I explained properly for someone to help.
Thanks.
It looks like that the installer process "wceload.exe" was not correctly quit and is still in the memory. Terminate the process wceload.exe with a task manager and try again.
Thanks ElectronX.
I did a search on my HD2 for the file you mentioned and couldn't find it. I have Duttys task manager installed and after a soft reset, the problem still remains. The task manager is empty of processes when I start the device.
Im sorry that Im a bit clueless to how to achieve what you suggest.
I have discovered that the problem extends beyond removing and installing programs. I cant do anything in file explorer other than open documents. If I want to move, delete, rename any file on the device I get the 'write protected' error message. I cant do it via active sync either..I connected to the computer and could browse my device, but if I tried deleting, moving or renaming, the message said it didn't have permission to do it.
Last resort is a hard reset, but hopefully someone will be able to help.
Use sktools to uninstall when windows fails. Best program ever...
Good luck
Thanks, but I cant install anything on my device...can sktools be run from my computer to fix the device?
Unfortunately not...
Good luck though..
sirphunkee said:
For programs that say they didn't uninstall completely, the method I use to get them out is this:
1) run the cab again, the same one you used to install a/the app in the first place
2) when it gives you option or error dialogs, just click "ok" or "yes" to all of them, to allow it to go through what looks like another complete install process (yes, it's odd, but this is how to do it).
3) when it's done, soft-reset, and then you should find that there's no more trace of the app in your uninstall list.
Don't ask me how/why that works, but I've used it in many instances for just that reason, and it's worked every time I tried it.
As for that "AA AA" app, I've certainly never seen a cab that used that name (fyi, the name in the uninstall list doesn't necessarily match the name of the cab file...only if the person creating it set it up that way). So...I'd just say uninstall it, and see if any apps/links are missing then.
Click to expand...
Click to collapse
Holy crap, this works.
Hey guys, I updated my Rom to Miri WM6.5 which can be found at
HTCPedia
/miri_wm21892_manila25_nomessaging_v21_1/soft/htc-blackstone-rom.html?c_page=5#comments ( I can not write the link because the system does not allow me)
but I have some problems with it. Firstly, when I try to install a java application, I get an error says " There is no application associated with "opera-mini-5.1.21051-advanced-en". Run the application first, then open the application".
What can I do to get over this problem ?
And secondly, How can I change the folder of an application ?
The last two comments are mine at that thread but I get no answer, so I decided to ask it more experienced guys
Thank you for your help =))
Seems like no one knows..
For Java applications you must install midlet manager (Jbed or Jblend) first.
Knuckled said:
Hey guys, I updated my Rom to Miri WM6.5 which can be found at
HTCPedia
/miri_wm21892_manila25_nomessaging_v21_1/soft/htc-blackstone-rom.html?c_page=5#comments ( I can not write the link because the system does not allow me)
but I have some problems with it. Firstly, when I try to install a java application, I get an error says " There is no application associated with "opera-mini-5.1.21051-advanced-en". Run the application first, then open the application".
What can I do to get over this problem ?
And secondly, How can I change the folder of an application ?
The last two comments are mine at that thread but I get no answer, so I decided to ask it more experienced guys
Thank you for your help =))
Click to expand...
Click to collapse
use this to instal Jar file
Thank you
Limited amount of applications
Can anyone help me with this?
I installed wp7 unlocked the phone with ChevronWP7 no problem.
Run Tom XAP Installer in administration mode and installed few apps. (Eight to be Precise)
My phone is unlocked but I cannot install any more apps only if I uninstall the old ones and replace with new one. only then i can.
Another problem I am having is that I fellow this step
Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app)
I have installed the HTC connection setup but every time I run the application I get an error messages
(The carrier doesn’t exist in database) also ask me to fix the APN configuration)
Can someone please help with these problems?
Thanks
joee1 said:
Limited amount of application
Can anyone help me with this?
I installed wp7 unlocked the phone with ChevronWP7 no problem.
Run Tom XAP Installer in administration mode and installed few apps. (Eight to be Precise)
My phone is unlocked but I cannot install any more apps only if I uninstall the old ones and replace with new one. only then i can.
Another problem I am having is that I fellow this step
Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app)
I have installed the HTC connection setup but every time I run the application I get an error messages
(The carrier doesn’t exist in database) also ask me to fix the APN configuration)
Can someone please help with these problems?
Thanks
Click to expand...
Click to collapse
You need the no limit chevron version or use advanced config tool to make it limitless
Hi,
recently I have changed three ROM on my Blackstone (all with wm6.5) and I always had this problem: when I try to use my app (Supergames mobile) and tap on one game I see two alert with the same message:
"Some content cannot be displayed due to the Pocket PC security settings."
and no game will be open.
I tried to remove code related to flash and javascript from my app and no alert wil be show (obviously no game start) so I think that there will be a security settings that blocks flash and javascript on CF.net webbrowser control.
Can you help me to find and modify that security settings?
Thank you!
PS: I have developed my app on HTC Blackstone (with WM6.1 original ROM) and tested it on some other device and emulator (WM6.1 and WM6.5) with no problem (until now...).
perhaps this helps you
malatest said:
perhaps this helps you
Click to expand...
Click to collapse
Thank you malatest for your answer but I have the same messages also after install your Cab (I've also tried a soft reset after installation)
I have made some test with my app to localize where is the problem and I think that the problem is related to .NET Compact Framework within the ROMs I have flashed on my Blackstone.
The CF version installed on these ROMs (v3.5.9198.0) is the same I have used for develop my app and test on my device and emulator (WM6.1 and WM6.5) but if I try a simple app with only one method call such, for example, "webbrowser.navigate" it don't fires (while obviously it fires on emulator and other ROM with CF installed out of ROM).
I tried to reinstall without success because I get the message that the version is already installed so as I have not found information on how remove CF cooked within a ROM, I have made a new version of my app for CF 2.0 sp2 (v2.0.7045.0) and with NetCFCfg I have imposed the application to start with it: security messages no longer occur!
At this point someone has any idea what could be the problem with cooked Compact Framework? (or how to reinstall them?)