Related
Using 4.1, got Qtek Rom on a Vario. Been syncing fine for weeks, now...just says connecting. It must be my Vario as my E200 connects no probs and syncs up properly. Tried going back to 3.8 (yeah I know) 4.0 and re-installing 4.1 but it won't connect...any idead argh !?
Hi there,
What message do you get? Getting settings I suppose?
Disable the firewall and try again ( this helped me, while upgrading a Wizard of a friend!)
Good luck!
Activesync Problems
I had this problem too - was syncing just fine for weeks then all of a sudden nothing. Managed to narrow it down (unfortunately had to delete the as profile each time and start anew) and I can safely say that in my case at least it was due to the "Synchronised Files" feature. I decided not to use synchronised files (i.e. I unchecked "Files" under "Options") and now I have it syncing everything else perfectly - on two separate PCs with absolutely no more issues.
Hope this helps mate.
Forgot to mention I have an o2 mini s. (Not the XDAII as indicated <--)
monkeyphonix said:
Using 4.1, got Qtek Rom on a Vario. Been syncing fine for weeks, now...just says connecting. It must be my Vario as my E200 connects no probs and syncs up properly. Tried going back to 3.8 (yeah I know) 4.0 and re-installing 4.1 but it won't connect...any idead argh !?
Click to expand...
Click to collapse
Did you install any firewall software? Do you have active firewall when running AS? Did you regedit your Wizard's registry in branches of AS?
Well at least you get some connection.
When I connect my KJAM I get the normal 'ding dong' and then NOTHING.
If I connect my old PDA2K to the same port it works fine!!!!!!!
Robin
Thanks for the help. I disabled my firewall (Kerio), reset the PC, did the other network hacks to try and get activesync to work. But it wouldn't.
But like I said my E200 (Voyager) sync'd no probs. Somehow as mentioned I think the registry got upset by some fiddling and a hard reset was the the cure then many hours getting it back to settings again, re-installing aps on mem card so I could see them on the phone as icons etc etc.
My device is a Vario with a Qtek Rom (tried K-Jam like the less stuff on the Qtek) with the extended Rom unlocked.
Re: Activesync Problems
stegz said:
I had this problem too - was syncing just fine for weeks then all of a sudden nothing. Managed to narrow it down (unfortunately had to delete the as profile each time and start anew) and I can safely say that in my case at least it was due to the "Synchronised Files" feature. I decided not to use synchronised files (i.e. I unchecked "Files" under "Options") and now I have it syncing everything else perfectly - on two separate PCs with absolutely no more issues.
Hope this helps mate.
Click to expand...
Click to collapse
Didn't think to try this. I actually had this prob on my Magician (MDA compact) before I sold it. Should have remembered. Cheers.
Hello,
In fact activesync seems to be te culprit of most my 9100 problems and slowdowns.
I am currently using Activesync 4.1.4841 and when synchronizing with my Wizard everything seems to be working correctly for a first sync. Then I disconnect it from USB, wait a few seconds and try to sync again and it takes forever...slowing down the Pocket PC drastically (until soft-reset)...until returning a timeout message:
"Synchronization cannot be completed sucessfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
Any ideia how this might be solved?
Cheers,
Francisco Teixeira
Hey guys,
Ok this sync is really bugging me, first it took me ages to work out why when i plugged it in the connection went green ina ctive sync and said connecting but wasnt working no matter how long i gave it - turns out it was a firewal problem,
but now when i plug in my wizard and the wizard says connecting under active sync but my computer active sync doesnt do anything, i tried switching usbs restarting both PC and Wizard to no avail, i know my PC is seeing somthing there because it says at first (when i plug into new USB port) found device etc etc, but then it installs it as a network connection and trys to aquire an IP/Network address from it!! that doesnt seem right to me!
Any advice would be great
Thanks
Nathan
hmm has anyone with a working active sync noticed if its installed as a network device for you? does the wizard work as a USB - GPRS modem? because that would explain that bit.
Thanks
Hmmm...
I'm gonna guess that no one is responding because you've basically said some things that lead everyone to believe you've not researched your device or problem before starting a new thread about issues that have been covered time and again.
First, by default Windows Mobile 5 (WM5) connects using the Network Connection method. If you want to use the old USB Serial connection your will need to upgrade to an AKU 2.2 or AKU 2.3 Rom.
Second, if you use the search function (see the top center of the screen) you will find numerous threads discussing several issues with ActiveSync.
Newbies are always welcome but you need to at least try to find your answers before just plopping donw a new thread.
Hi,
I did a search, and tried most of the suggestions, but i dont get this AKU2 thing? and couldnt find a deifnition.
but anyway im since broken the phone so thanks anyway guys
Check your vpn option and firewall option. If you using cisco vpn then uncheck "statefull firewall (always on)".
Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris
My HTC P3600 is having some weird problems with activesync... Basically the activesync just don't recognize the equipment... Weird!
Anyone have any idea what is the problem???
My blueangel using wm05 just works so fine in the same pc...
I Had the same problem...perhaps your issue is the same as mine was...
I corrected it by going to start>settings>Connections>USB to PC and then unchecked the box next to: Enable advanced network functionality...it is the only option on that screen - and it is either checked or unchecked...I unchecked mine to get it to work. Hope that helps...
I think this issue is related to WM5.0 & Activesync 4.2 i/o Trinity.
After 2 long night search on the Net, I finally made my Trinity activesync works with my company notebook. Home PC should be easy. Search for Activesync 4.2 issue on the Net and you can find the issue is in:
1. Firewall
2. That flag mentioned by GeorgeR above
3. Conflicts with VPN client
Hey guys,
I have searched for this problem on the forum but I can't find a solution. The problem I have is that my Bluetooth is not working like I would like it to:
When trying to connect from my TD2 to my pc (xp) / laptop (vista) I get the message:
Cannot connect
Your device hasn't been able to connect with 'pc-name'. De connection failed or the password is incorrect.
(I get it in dutch... so if my translation isn't the same as in the english version you know about it).
When using the pc / laptop to connect to the TD2 I get a screen where I can choose between two bluetooth services:
- Dial-up Connection
- Network Access Point
... These are the only two. When I use my old phone I can also use a Serial port connection (and even a few more).
The purpose of the bluetooth connection is to be able to synchronize my contacts with my Microsoft Outlook 2007.
Can someone please help me with this problem? I have already tried a few things, like soft- and hard reset. Updated the ROM, etc. But it is still not working. The only thing which DOES work is connecting the TD2 to my radio in my car...
Thanks in advance
Hi robje,
Ive got same problem with you.. but i managed to solve it ..try enable receive all incoming beams.. u can find it at all settings --> connections --> beam --> then check " receive all incoming beams"... good luck.....
Thanks for the quick help!
I already enabled this setting, but I still have these problems...
I've got exactly the same problem with my bluetooth,are you still using the stock ROM? I've currently got energyrom's standard2.5 installed so I thought that it maybe WinMob 6.5... My wife's phone is fine and she's using the stock ROM. I'm going to go back to HTC's stock ROM, so I'll give you another update after I've done this...
One note to add.. I've seen that on my older Diamond, the bluetooth COM ports menu shows "New outgoing port", whereas my new Diamond2 shows nothing on the same menu...
Update... I've flashed my Diamond2 back to the original HTC ROM and bluetooth is now working correctly. So it looks as though the problem is probably with WinMob 6.5...
Can anyone confirm this at all???
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Robje113 said:
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Click to expand...
Click to collapse
The retail version isn't but a lot of the ROMs on here have been done with beta versions of 6.5 (mines on build 23016)...
Anyway,I've flashed back to my cooked ROM and bluetooth still isn't working correctly. I've been messing around with the "advanced configuration tool" and found that OBEX was disabled. However once I turned this on, it still wouldn't work correctly...
Yeah I also found the OBEX using Advanced Config. But that didn't seem to matter... I hope anyone knows a solution for this, because it's really annoying! I have contacted the HTC Helpdesk... but didn't get much help. After giving all details about the problem they send me a manual of how to turn on the bluetooth radio on a mobile device :|...
Have you tried reflashing with the latest update from the HTC website?
This problem is getting weirder... I've now found that I can send files from my TD2, it's just the recieving of them that won't work. So I think it must be a possible compatibility issue between WinMob 6.5 & the older version on my TD...
Has anyone got an idea to solve this problem...?
No intention of being a smartass though...
Have you checked the box "visible"?
magnus66 said:
No intention of being a smartass though...
Have you checked the box "visible"?
Click to expand...
Click to collapse
Hey Magnus,
I do have checked that box and it's visible. I have done all there can be done (the easy way) on the TD2, but all settings are correct. I can also see a list of available bluetooth services on the phone, which also describes the one I need. But when I then try to connect my pc with my phone, I can only choose on my pc between:
- Dial-up Connection
- Network Access Point
Only those 2... when there are much more available according to the list on the phone...
Have you tried to connect to your "old phone" as you mentioned?
Sending receiving between those phones