For some reason 'MortSaver v2.0 - Phone Edition', prevents 'Voce Speed Dial' to complete via BT headset activation.
VSD starts, you hear the beep to spell contact name, but as the screen doesn't came up, it also doesn't proceed recognizing the contact spelled.
Any hint here?
It would be great getting both apps interworking properly
Related
Hi guys,
Remember there is "Automatic pickup" (see Phone/Tools/More)?
Well, try using it while having your Bt earpeace or hands-free kit...
No go? Have to press a button in order to get the chat?
That is exactly what's driving me crazy!
See if you can adapt automatic pickup for the earpeace too...
I tried - in vale..
Hmmm...
Do you mean where I can actually pick up a call when the phone is ringing?
I don't get the idea, can you be more specific. When my phone rings, I just simply hit the phone button on my Jabra 250V.
Auto pickup by Bt
Let me put it this way:
The auto pickup format is made for receiving a call without the need to press anything: after a few rings (you set their quantity) the phone is open for the conversation by itself.
Go to Phone / Tools / More and see for yourself!
The problem that if you use a Bt device you have to press a button in order to get the call, even if it's auto pickup.
Now, try doing that in surgery or while you have to pay attention to the road when driving..
Let's find a way to allow auto pickup through Bt as well!
i have a problem with this. i'm sitting at my pc, someone calls my phone automaticly answers and connects to my pc as hands-free. it does all this in like half a ring so i have no time to stop it. i have to pick up my phone take off handsfree and then i see who it is i'm talking to, and most of the time its people i'm avoiding. and its getting really annoying because my bt on my pc reaches my phone almost anywhere in the house i went to phone-tools-options-more and the auto answer feature is unselected. what do i do? also when i go to bluetooth devices on my jam there is no remove hands-free only set as handsfree.
-----------------------------------------------------------------------------------------
i fixed it, i just went to bluetooth services on my pc and unchecked start up automaticly on headset thingy.
thanks anyway
I have been using the voice dial option on my Cingular 8525 without any problem since day #1 and it is great, especially after downloading that file on XDA that allow me to reprogram the 5th pushbutton for voice dial.
I also admit that i am knew to the headset arena, having just purchased, for voice dial and incoming calls, the 'Jawbone' device, which was highly rated on CNET and PCWorld.
It doesn't work. What I mean is it rings and I can answer phone calls and it sounds OK, but when I go to voice dial out, the phone either gives me a message that it didn't understand my request or I get a wrong phone number. Failure rate on voice dial is 98%.
The manual says to rerecord the voice tag with the Jawbone on, for maximum effectiveness. so i turned it on, put it on, went to voice dial and just re-recorded the voice tags, still with 98% failure.
So, is this how it is with the 8525 and ALL headsets or do I return and try a different headset? Are there tricks to get this working? If I could just get 10 numbers to work, that would be 75% of my calls. Thanks.
Doesn't anyone use a headset with their 8525?
I hope someone posts an answer...please.....
I've been using a Southwing SH310 Bluetooth headset with my Cingular 8525 and Custel's WM 6 for several months now without probs; position can sometimes be tricky for VoiceDial and/or Voice Commander to work well, but once in the correct position it's good. I have found, however, that Bluetooth devices, especially the high end ones that are particularly sensitive, can have problems with external noise, i.e. wind and car noise when driving, etc.
Hi everyone
I have Eten M700 with WM6 ..
I tryed couple of bluetooth headsets (regular, not stereo) and i was able to pair all OK & make and recieve calls
I was even able to divert all sounds to headset to listen to my music (using either btIO or Blue Music)
I also have MS voice commander 1.6 US & it works through bluetooth without problems
I still have one problem:
when i end a phone call (touching red screen dialpad button or by hardware button) or even by waiting for the person on the other line to hang up..then my headset disconnects (i do not see the headset icon on top right of dialpad) and on the next phone call i have to restart pairing by pressing the headst button (it should start automatically & not disconnect)
i do not have to enter pairing code but it is still one extra step that i did not have to do with other phones..also, i miss some calls because when it disconnects i may not hear my phone speaker ringing as i will be away or driving
Does anyone else have the same problem?
Any fix (software, cab or reg tweak) out there to keep the bluetooth headset connected and paired inbetween calls (not disengaging after a call ends)
Thanks
I have the same problem, though i use my DS-220 as a wireless stereo also , i have no problem using it as one or another (handsfree/stereo headset) but as soon as i'm listening to something and i answer a call, sometimes, the headset disconnects itself after a call and i also have to push the button on the headset to connect it again - but not every time, best solution to resolve this problem for 70% of occasions was to uninstall Microsoft Voice Command 1.6 which was messing up with the BT on my phone, since it uses the handsfree's talk/end button as it's own "engage" button, but still, sometimes, this error occurs
I was wondering, if someone of u has working BT Widcomm or any other better BT stack (better than the microsoft bull*hit) and would mind PMing me the link, I could try it out and see, if that's the solution
BT new fix needed
This dsconnection has been happening with me even before MS voice command installation
i did not notice difference with it installed, i am alble to make commands without bluetooth droping & i give my commands through the BT headset without any registry hacks (read something about people having to give commands through phone speaker not headset) i do not have that problem
my only issue is the dropped connection after finishing a phone conversation (by ending a call or other side ending it)
I need a good developer to fix that & also, maybe work on dr.Yar BT software that shows sender/reciepient ID and file progress. that software shows blank white pop-up window when recieving files from some devices.. maybe also add a clickable line to make BT discoverable or hidden to the menu list there
i use BT only for regular mono headset & file transfer, i route music to my mono headset with BlueMusic v2 sometimes too.
If these 2 issues are fixed im all set (droped with calls & ID/progress blank window in Dr.Yar)
Thanks for looking
nothing
no one has solution for this???
I installed Cyberon Voice Speed Dial on my Omnia, but not CAN initiate voice call by bluetooth. I have to trigger the application on the handset screen for a shortcut and then the call is transferred to the headset. The strange thing is that if the call comes in, that is, upon receipt of the call, I usually attend the headset. However I noticed that when you release 'button on the bluetooth headset a little more length, something like 01 seconds, fires the standard dial pad. So if you drive a bluetooth program on PPC, I think is missing only the direct action triggered by the program for bluetooth voice dialing (Cyberon), that is, assign to the bluetooth function to activate the program Cyberon Speed Voice Dial. However, if the key bluetooth is already pressing the dial pad Samsung's standard, and opens the microphone bluetooth, what is missing in my understanding, it would redirect (change) the action of the button the program you want.Se PC, I would say that would be only a matter of changing the shortcut target .. but if in the PPC do not know how .. someone help me please?
Hi Aureo,
You try to install JETware Hands-Free Extension v1.31, under menu>advance config>tick on voice dial, tqvm
Thanks, I did this, but the "voice dialing" is not enabled on my device. Displays a message (No voice dialing ...). I do not know what to do, was my good old HTC Diamond that worked all right .. but the screen I8000 is wonderful, so I insist.
Ok, so coming from a Nokia N80, I'm used to holding down the call/answer button on my Jabra BT530 headset, the phone beeps and displays "speak now", i say the contacts name and it dials...
Trying the same thing on my Samsung Galaxy S has no effect???
Supposedly this phone and the BT530 support handsfree profile... so what gives?
I've also tried with a BlueAnt ST3 carkit... and when you push the call button, you just get this funny "bong" noise and nothing happens on the phone...
I went into the BT settings on the phone, and the only profiles it has listed against the BT530 are "phone" and "media"...
Does this mean I have to use the phone to initiate calls? I seriously hope not, as that is now illegal in NZ while driving (which is about the only time I actually use BT) and is liable to land me a $150 fine for using my phone while driving!!!
Unfortunately, its a limitation of Android up to 2.1 Eclair. Voice dialing by bluetooth only works in Android 2.2 Froyo builds which are starting to show up little by little. Until, your phone gets Froyo, you will not be able to dial by bluetooth.
Thanks for the clarification...
I was going mental thinking I had it working when I first got the SGS (ie. before I got "Odin-Flash Happy" ) and that I had "broken it" by using one of the "unofficial" firmwares...
I will be able to sleep tonight
Now I just need a nice stable 2.2 firmware to get leaker
Is this officially listed as a Froyo capability?
I find this seriously limiting, and even dangerous.
What about sending audio to a mono bluetooth headset? Will this be possible with Froyo?
I tried Super BT Mono, but it doesn't seem to work on the Galaxy S.
Thanks!
one tap on the BT headset main button
wait for beep beep
yell out the name (it always gets it wrong)
then it launches the confirmation window
select from (application, contact, phone, crap load of stuff)
then dial...
even though it works... it's not "automatical" enough
it's more like a voice search, than a voice dial