I upgraded to WM2003 in Jeff's fabulous kitchen. Everything works great. My ISP has different access points for wap and www over gprs. It works with WM2002 very well but with WM2003 does not. What could be the possible problem? I guess WM2003 has more problems rather than advantages (if any, of course. I haven't discovered any, except for the character counter in sms message composer). This forced me to downgrade the ROM to Jeff's 3.17, which is perfect in all respects.
They say Pocket Internet Explorer can do WAP since WM2003. Haven't tested it, never use WAP.
wm2003 & WAP
The main problem is that PIE 2002 or 2003 don't understand wml. Yes, I tried with required access point & gateway but it just does not connect. The problem is that I really need to browse some wap info as these pages are not available on www suitable for xda.
Anyway, I am perfectly happy with Jeff's 3.17 ROM. I get WM, I get ezWap. Everything works very well.
One problem, though a little out of place. tdLaunch sometimes makes the Xda crash. It happens, be it in ROM or installed separately.
I think its yr configuration or yr ISP.
Ive been using EzWap and PIE to do wap extensively
on gprs with either PPC2002 or wm2003.
samohile said:
WM2003 has more problems rather than advantages (if any, of course. I haven't discovered any, except for the character counter in sms message composer). This forced me to downgrade the ROM to Jeff's 3.17, which is perfect in all respects.
Click to expand...
Click to collapse
You are right!
Pocket PC phone version WM2003 has more problem than advantages in Pocket PC phone.
but I'm using IPAQ WM2003 no such problems at all!
alqwerty said:
I think its yr configuration or yr ISP.
Ive been using EzWap and PIE to do wap extensively
on gprs with either PPC2002 or wm2003.
Click to expand...
Click to collapse
You may be right about the isp. but they are not in a position to solve my problem. They have never heard of PPC, they don't know the difference in services provided, they don't know what are the configurations. All they know is to send the configuration by sms to the user's mobile phone, which is useless in case of xda.
However, I am sure PIE does not support wml. Can you tell me how do you make it understand wml?
Can you access these pages?
http://wap.yahoo.com.sg/
http://wap.ft.com/
http://mopilot.com/wml/index.wml
Because my PIE can
You should be able to browse any WAP site on the Internet through the Internet connection. However if your operator has both WAP and Internet connections then the WAP one will probably only allow you to browse their own WAP gateway site, and possibly other WAP sites through the WAP gateway.
In Pocket PC you cannot set the Internet Explorer to select which connection you will use. It defaults to the Internet setting. As you must define the WAP proxy using Work Settings, this is of no help to you.
The best solution is to create a new connection settings area, configure both Work And Internet locations to use it, and put all you connections in there. Then manually select Internet or WAP when you want to switch.
WAP settings over gprs..."it
vpreHoose said:
You should be able to browse any WAP site on the Internet through the Internet connection. However if your operator has both WAP and Internet connections then the WAP one will probably only allow you to browse their own WAP gateway site, and possibly other WAP sites through the WAP gateway.
In Pocket PC you cannot set the Internet Explorer to select which connection you will use. It defaults to the Internet setting. As you must define the WAP proxy using Work Settings, this is of no help to you.
The best solution is to create a new connection settings area, configure both Work And Internet locations to use it, and put all you connections in there. Then manually select Internet or WAP when you want to switch.
Click to expand...
Click to collapse
Thanks.
I have tried all the options, this one too. It does not work. I found use of EzWAP 2.5 more convenient, as it has it's own proxy/gateway configuration area. It does not depend on gateway config of connection manager. Further, it allows you to choose your nodcm connection.
What puzzles me the most is that EeWAP 2.1 or 2.5 did not work with Jeff's WM2003. It works with Jeff's ROMkitchcn 2002.
Hi,
in Germany we have an O2 WAP-Flatrate that does require the use of a specific APN/Gateway. However, a lot of pages (including the O2 Active Pages quoted in SMS-eMail notification) come with http prefix which makes the Internet Explorer wanting to open the Internet GPRS instead of the WAP GPRS connection. Even the documentation of O2 refers often enough to http:// instead of wsp:// pages.
Now the question: How can I make the Internet Explorer coming with the XDA 2 to use the WAP settings including the proxy and port (actually it should be gateway rather, but the XDA 2 only allows you to set ports) set for the WAP-connection (in a way that works).
Can I trick it to open "http://" sites? Maybe with some registry tweaks?
I can change the network that is used to connect to the internet to the WAP network(where I can set a proxy), but that does not seem to work. On SE P800 I can even display proper websites with the same settings.
Any ideas how to unlock this?
Regards,
Hello!
When using WAP on my Qtek 9090 I am having problems with many WAP pages. When clicking on a link I often get "This page contains errors and cannot be displayed"
Www pages works perfectly.
I need this function to work because I access my mail thru Vodafone’s WAP page. Off curse I can access it thru www but since WAP uses not some large information it would be good to use WAP.
Wich wap browser do you use?
You can't do it with IE, you need a wap browser
OK! Where can I get one?
Wich one is the best.
Hi everybody!
I've just register to this cool forum but I've been reading the threads for a time now!
I don't have the solution to your Gprs problem sorry, but I cannot connect to the wap over Gprs and I have no error message when I connect to the Gprs.
I'am now using rom 1.12 FR and removed the extended rom.
If someone could help me to fix this problem, it would just be great.
Thanks a lot.
first check if you have set properly connection settings
http://www.mobistar.be/en/service/howto-GSM_Configurator/manual.html
remember that using WAP services on pocket internet explorer you have to use wsp:// instead of http:// at the beginning of every WAP adress
shamus said:
first check if you have set properly connection settings
http://www.mobistar.be/en/service/howto-GSM_Configurator/manual.html
remember that using WAP services on pocket internet explorer you have to use wsp:// instead of http:// at the beginning of every WAP adress
Click to expand...
Click to collapse
What about WAP sites that begin with http:// ? I cant seem to connect to those, cause when I insert http the explorer reads it as a normal webpage, and its a WAP page
Hi, i have recently became a new member of having HTC Tytn, but it is very interesting as internet connection is not working with all application. For example it works with opera mini, skype, but refuses to browsing in IE, Opera, Worldmate, writes problem with connection or problem with proxy,
How i can solve this problem to make work with all app.?
My operator settings are:
APN: omnitel
IP:194.176.032.151
username: omni
pass: omni
maybe i use this settings not ib proper way? confused