Heres a question for u: is it possible to connect to my exchange server using activesync via an RPC over HTTP connection? Currently i have to dial a VPN connection before connecting which is rather cumbersome (having to dial and it frequently drops). It is available in Outlook and is much more efficient. Cheers.
I am assuming that you are running an exchange 2K3 SP2 and Windows Server 2K3 SP1 right off the bat. If you are not this info may not apply.
When you install Exchange 2003, several virtual directories are created under the Default Web Site in Internet Information Services (IIS).
One of those is "Microsoft-Server-Active-sync" If I am not mistaken this is what your PPC uses when syncing. So you don't need to setup your PPC to use RPC over HTTP like you would outlook (with the http address, and the internal server name, and the MSSTD crap). Check to make sure your front end server (Web server) has that virtual directory in the default web site. If not, there are quite a few tutorials on Google that you can look up.
Hope that helped.
Later; Lew
http://www.google.com/search?hl=en&lr=&q="how+to"+install+"Microsoft-Server-ActiveSync"
Related
Hi all,
my device (iMate Jasjar 1.13.53 WWE on WM5) syncs without problems through my office-pc with the exchange server standing at the office. This is a wired connection, working through ASync 4.1 (USB).
If I disconnect the USB-Cable, hence force the device to sync through another connection, it will try my GPRS-settings. The GPRS-settings work normal for Internet and eMail. After some time of trying I get the error 0x80072EE2 "The server could not be reached. This can be caused by temperary network conditions"
The server is working normal though.
Does anybody have some advice for a newbie (absolute no network specialist). My exchange server administrator is new to this as well. So if I would be able to read into this somewhere, or get some insider tips it would be very helpful and highly appreciated.
with kind regards,
Ruud Westerhout
how do you have the server name entered in the activesync settings?
are you using ssl?
has it ever syncronized w/o having it connected to pc?
does the exchange server have a public IP address?
thanks for fast reply,
as we are a little apart (time-wise) I am at home already and not able to answer all :
my server is at : mail.al????.ru
I was told to sync like :
Server address : mail
This server requires en encrypted (SSL) connection : NO
User name : the one I am allowed with to enter our network
Password : my usual password to enter our network
Domain : al????.ru
Save Password : YES
If there is a conflict : Keep items on my device
Event logging : Brief
With these settings like this, I was able to sync with the exchange server while connected through USB. ASync was getting a special allowence and the Microsoft Firewall Client was disable for it.
It has never been syncing wireless in any way, only USB, in the office.
I presume we have a public IP address, but I should counter ask my administrator about this.
If You have any ideas after reading this data, please shoot ;-)
The answer on IP I will add (or edit) tomorrow.
regards,
Ruud
yeah. it depends. if it is synching through USB, for me it is hard to tell if you are synching directly to the exchange server or to the workstation. if you have a mail profile setup on your machine and you are synching with activesync. on your desktop with activesync does it specifically show that it is synching with your exchange server? actually better yet if you run activesync the screen will tell you the last syncronizations. you will have an "Exchange Server" section and the last time it synched and probably a "Windows PC" section.
If your Exchange Server section has a synchronized time then your settings are correct. (The time should also be the same as your Windows PC time)
If it has something like Never synchronized or something other than a successful synchronization time, then those settings may not be correct or something is not right on the exchange server or network.
So if you do have a successful timestamp for the "Exchange Server" field, then everything on your device is good. The problem may be that either the exchange server does not have a public ip or a dns issue. (you can try to resolve the latter by putting in the IP of the server instead of the dns name in the server field for AS)
If it still doesn't work then it could be a firewall issue in front of where the exchange server sits.
Hi ccisn,
I actually am syncing with 3 different things. My Home-PC, my Office-PC and also the Exchange Server at the office. I get all synced and a correct time stamp with all, this works.
f.e. My contacts are synced with both Home-PC and Exchange Server (not the Office-PC anymore as this is not possible)
So I understand that the settings in my PDA are then correct and I should be searching for the problem in Server, Firewall, IP / DNS Settings.
I will try this idea of putting the IP though (as soon as I will get it tomorrow)
thanks for now,
Ruud
Update :
I inserted the fixed-IP our Exchange Server has into the address field and with this input the server did not even want to sync whilst I have a USB-ASync connection.
Question for my understanding :
Is the following a technical possible setup ?
-At home I connect through USB giving me access to my Home-PC and the internet. The PDA will sync with the home-PC and the exchange server which he will find through the internet.
-At home I connect through WiFi giving me access to the internet. The PDA will sync with the exchange server which he will find through the internet.
-At the office I connect through USB giving me access to my Office-PC and the exchange server. The PDA will sync with the Office-PC and the exchange server which he will find through the office network.
-On the road I connect with a GPRS- (or eventually UMTS-) connection which will give me access to the internet. The PDA will sync only with the exchange server which he will find through the GPRS-connection.
regards,
Ruud
I am sure the problem is, that you cannot sync over the public Adress with the Exchange Server, because there is only Port 25 for SMTP from the internet to the server, and this port is not for Outlook Connection and these things
No company ever had a Exchange all-open on the internet! try to sync within your local network and the internal-name of the server!
Well syncing within the Network works. If I connect with USB to the office-pc I can sync to both office-pc as well as exchange server.
Do I understand correctly that I can forget (not realistic) to sync wirelessly (GPRS, UMTS) while on the road ?
I just hoped that this way I could receive contacts / calender items from my secreatary on the road.
Ruud
The Exchange Server is open on your local network, thats why you can sync. But from the internet, there ist only mail access (and maybe a few other ports that the admins opened) to the exchange.
Talk to your admins, and ask if it's possible to connect with a VPN to your office. Over these VPN Connection you can sync with your exchange.
Ruud Westerhout said:
Update :
-At home I connect through USB giving me access to my Home-PC and the internet. The PDA will sync with the home-PC and the exchange server which he will find through the internet.
-At home I connect through WiFi giving me access to the internet. The PDA will sync with the exchange server which he will find through the internet.
-At the office I connect through USB giving me access to my Office-PC and the exchange server. The PDA will sync with the Office-PC and the exchange server which he will find through the office network.
-On the road I connect with a GPRS- (or eventually UMTS-) connection which will give me access to the internet. The PDA will sync only with the exchange server which he will find through the GPRS-connection.
Ruud
Click to expand...
Click to collapse
Yes to all of the above.
The vpn solution should work too if your environment supports PPTP connections. Most don't and only allow IPSec or L2TP connections which is a whole other mess to get to work on handheld devices.
As to the ports. It a little different for synching with Exchange. It only requires HTTP (80) or HTTPS (443).
If you can use Outlook Web Access then you can sync over the air with your phone. (Assuming that all the Mobile Sync settings are correctly set up on the Exchange server) Which in your case sounds like it is.
I have always been able to succesfully connect to the exchange server via activesync, whether it be via GPRS or USB. Now I can't, I keep getting the http_500 error.
I have checked and I can log into the exchange server via OWA in either http or https. Have changed my phone to use SSL, not to use SSL, nothing, same error.
Looked at Microsoft's explanation of having a duplicate smpt address, but it can't be, as the server is running Exchange 2003 SP2, so I can't configure or look at the server. I also can't ask IT, as they don't know I have access and even if you ask, they won't know, as mobile devices are not yet supported.
1 - The Exchange Server has to be configured to allow Mobile Devices to connect.
2 - The Exchange server has to be configured to allow push mail
3 - I think you need to install a certificate on the PPC (using enroller, or just copy/paste the **.cer file and open it)
Maybe you don't need the certificate when NOT using SSL, but I think I remember I couldn't get it to work without... So I installed my certificate on my PPC and HAD TO use SSL to get it to work.
However, ...If you cannot even check whether your Sysops allow pushmail/ActiveSync, you are in dire straits.... You have to know that info.
Hi Guyz,
i have an HTC Trinity with latest rom released from italian distributor, just flashed three days ago.
Everythings are working fine but i cannot set a configuration for sinchronization of my company's web exchange server.
We have Exchange Server 2003 with SP2 and gate 443 already enable, but nothing....with Active Sync, during server's configuration, i cannot see any web server at typed address.
Web addressm user id and password are right.
Someone can give me a procedure for this setup? Any suggestion??
Many thanks.
Marco
Hi there, take a look at this:
http://www.msexchange.org/tutorials/Configuring-Mobile-Devices-Exchange2003.html
and this:
http://www.msexchange.org/tutorials/Managing-Mobile-Access-Exchange-Server-2003.html
or (absolutely recommended) try olx mobile access at www.gangl.de. this works perfect an it's easy to configure. Don't mind the german website for the application ist in english. 30-days trial for download.
Best regards.
There is a known Issue connecting with Exchange with ActiveSync and OMA
If your Exchange server is set up to use Forms-Base authentication(must be used to enable compression of static and dynamic data from the exchange server), ActiveSync and OMA will fail. This is a know issue. ActiveSync and OMA use WebDav to authenticate the user with NTFS permissions. Forms-Based authentication blocks this. Another virtual directory must be made for devices that use WebDav to authenticate with. Two places that discuss this issue and how to work around it are...
http://www.petri.co.il/problems_with_forms_based_authentication_and_ssl_in_activesync.htm
and at Microsoft:
http://support.microsoft.com/Default.aspx?kbid=817379
Sean Beeson
My ISP blocks all ports below 1024 so I had to setup my SBS2003 Exchange server to run on port 8080 (HTTP) & 4443 (HTTPS), which works perfectly (tested locally & on remote locations).
When I add the correct secure portnumber to the server address (ActiveSync > Tools > Configure Server Source), ActiveSync cannot find our Exchange Server. When I remove the portnumber everything works fine as long as I'm on my local network.
I enter it like this: exchangeserverdomain.com:4443
I have OWA running perfectly by using the same external server address:<port>, and all needed certificates are on my WM6 device (it's the HTC Touch Dual).
Seems like ActiveSync doesn't like portnumbers.
Any tips?
Me 2
I'm having a similar problem.
Anyone can help?
Many thanks in advance.
Pozi.
If anyone has found a solution for this, I sure would appreciate knowing. As I'm sure you found, older stuff retrieved by Google makes it clear that MS just didn't provide support for ActiveSync on custom ports in previous WM versions, but couldn't they have remedied this oversight by now? Reg key?
Active sync - Exchange: SSL over a non-default port - Solved in WM65 ?
Any idea if there is a workaround for this problem in WM 6.5 ?
thanks,
Koen.
No, I don't know if WM6.5 finally added the ability to specify port number for Activesync server.
We solved this need by using "SSL host headers," which permit multiple IIS sites to use the default SSL port 443 with different host names. Although the IIS (6.0) GUI doesn't provide this capability, it can be done at the command line using adsutil.vbs found in Inetpub\adminscripts. It requires a wildcard SSL certificate, is a little tricky to get right, and results in a misleading error message in the event log every time IIS starts, but it does work reliably.
See:
http://www.microsoft.com/technet/pr...108-b1a7-494d-885d-f8941b07554c.mspx?mfr=true
ISP blocks all well-known ports - server activesync not working
thanks for the information, the configuration of Exchange is indeed not an issue.
Problem is that my ISP blocks all well-known (service) ports like 443,...
I would like to configure server activesync to use a different port (above 1024).
The Activesync interface on Windows mobile does not allow to enter a port number to specify the protocol.
eg. remote.company.com:4433 is automatically changed back to remote.company.com.
Any idea of a reg-key on WM to change the port to use for server activesync ?
If there is a way to do that in WM65, I don't know about it.
What kind of ISP "blocks all well-known ports"?
Good luck.
Not a solution per se but could you use SevenBeta to get your mail pushed? i think it works as long as you can get to the OWA server from the device. probably wouldn't give you contacts but at least you'd get mail while out of the office.
It's not Exchange, but the client...
I dislike it's come to this but it's true, the iPhone handles this over custom ssl ports just fine and I have not come across anything else that does. I do not know why. With the iPhone or iPod touch too I'd guess, you just enter your email address and password. It tries the regular ports and fails, and where you enter the server you enter your port like servername:customsslport and then you have full active synch abilities, synched email, all your subfolders, and the option to synch calendar and address book too.
I recently tried an android phone and looking for a solution, at this very site found out windows phones couldn't do this either... Developers have tried to give google this code correction but they won't accept it for whatever reason. I ended up using a tether to my old iPhone just to get decent ActiveSynch over custom SSL ports until I gave in and took back the Atrix for the newer iPhone, as my old phone was falling apart and was the older slower one. I've tried 2.1 & 2.2 Android phones and when you try to enter the port using serverort syntax you get invalid server format or the save button just gets grayed out until you remove the port. There's a few buggy market apps that sorta work in a limited way. It's possible the Blackberry may allow custom ssl ports on Exchange synch setup too, but I don't know, only that Windows and Android phones had issues with this but it works perfect on the iPhone, so it can't be a limitation of Exchange exactly. I haven't run into any good desktop clients for this, but to access full mobile email, synching even sent items and pushing select custom folders, calendar and contacts the iPhone truly synchs all these fine by entering the same port you use for custom OWA ssl in the Exchange email setup. I wish even desktop Outlook handled custom ssl port synching this well, and I'm not sure how the iPhone does it, as it seems very lightweight.
http://forum.xda-developers.com/showthread.php?t=602494
Lukasss said:
My ISP blocks all ports below 1024 so I had to setup my SBS2003 Exchange server to run on port 8080 (HTTP) & 4443 (HTTPS), which works perfectly (tested locally & on remote locations).
When I add the correct secure portnumber to the server address (ActiveSync > Tools > Configure Server Source), ActiveSync cannot find our Exchange Server. When I remove the portnumber everything works fine as long as I'm on my local network.
I enter it like this: exchangeserverdomain.com:4443
I have OWA running perfectly by using the same external server address:<port>, and all needed certificates are on my WM6 device (it's the HTC Touch Dual).
Seems like ActiveSync doesn't like portnumbers.
Any tips?
Click to expand...
Click to collapse
hmmm this is interesting
When you are setting up a new server source in AS, it has some options for doing things automatically (I assume based on our email domain name). This has never worked for me (I am the sys admin for our Windows network). Do I have to be running Exch2007 to get this functionality, or is it some sort of DNS issue that is making this fail? The front-end server that we use is not mail.domain.com We use webmail.domain.com.
Any thoughts are appreciated. We are going to be allowing our users to bring their own service and devices to our cell phone mix, and I want to make connecting with WM devices as easy as possible. I'm trying to reduce the number of blackberry devices we use.
Thanks!
Brandon
Microsoft Exchange 2007 Autodiscovery
Autodiscovery allows a user to enter their email address and password into Outlook 2007 or Windows Mobile 6 Pocket Outlook to have their profile or activesync relationship automatically configured to access an Exchange 2007 server.
In short, you add a DNS record for the host "autodiscover" in the domain you want to use Autodiscovery in. If you want it to work internally just add it to your company's DNS server. If you want it to work externally you have to add it to your external DNS server.
One important note is that you must have a multi-domain SSL certificate from a known public provider. This is because you need 4-hosts on the certificate (2-domains with 2-hosts each) I purchased a multi-domain certificate from GoDaddy.com for $58 for 1-year.
Search keywords: +Exchange +2007 +Autodiscover