Truly Disappointed in myself - JASJAR, XDA Exec, MDA Pro General

Hi All, I have to say, I think I have bitten off more than I can chew....I can't get the upgrade to work even using the NOid file as instructed..... I can't get pocket outlook to load ont my xda from supplied disc...the option is ghosted and won't let me select it for install......just connecting my xda and syncing leaves me with an exclamation mark and the support code 85010014, none of the info is txd to my xda...... I can't load gprs monitor as it says I need to upgrade my rom first... I was quite happy with my ipaq h5550 everything worked, linking up with my nokia 6630...... Now I'm totally baffled and feel well out of my depth with the xda I can't get the basics to work please help.
Regards
Tim

Is this a ROM upgrade?

think of a ppc as a computer.
if it doesnt work, format it and start again.
a complete flash can be done quite effectively in less than an hour, then reinstall your apps.
it can be unreliable, pedantic, and even stubborn. some devices simply dont work and get sent back.
in the end though, all the people here are willing to help, so if you can perhaps take some time, and be more specific. i would simply start again. if your not particularly conversant nor knowledgeable in any particular area, then consider being careful and getting some good back up software (2 days to go from SPB).
reflash your device entirely, again. if it fails, flash it again. if it still fails, post a description and a request for help online while you do it, or plan it and use either PM or Messenger with somebody who might be able to help. if you are upgrading with legitimate bone fide released rom from your suppliers, get them to help you.
if you are using cooked roms, or the beta version, there are a few here (not I), that will help, but many work so some forewarning and preparation might be required. if you are not that experienced at it, step back to the released roms from the suppliers, beta's are just that.
repost, with clarity and details, including the version you are on, the version you are stepping to, the details of the device manufacturer (dont say HTC eg Imate, O2, dopod etc).
In other words, I am not much help, cause you aint given us enough to go with.
Regards
S.

Outlook sync problems
Thanks Simon, I contacted my supplier (o2) with good results...
Just in case anybody else is experiencing the same problem with their outlook sync...........I phoned o2 technical who were very helpful and informed me that if I removed MS Activesync 4.0 (supplied with disc) from my pc, reboot, then download and execute MS Activesync 4.1 from MS website (just google 'activesync 4.1') then finally reboot after installing MS Activesync 4.1 (before connecting your Exec). Once rebooted connect your device and.......presto everything is working fine..
Hope this helps someone.
Cheers
Tim

Related

T-Mobile USA Confusion

OK, so now that I know about what's out there for my T-Mobile PPCPE (USA), I am now looking for some advise. I have a 'stock' T-Mobile (ROM 3.14.40 ENG), and I'd love to be able to take advantage of 'Wireless Modem' and possibly 'Always On GPRS'. T-Mobile is really slow with coming out with any updates at all, so I think I may be on my own. Could I get some honest advise?
1) Should I upgrade to a new ROM? If so, do I use the 2002 'special edition' ROM, or one of the various WM 2003 versions? I am very happy with my PPCPE as it is (except for the poor T-Mobile coverage), but I'd really like to be able to use it as a Wireless GPRS connection for my laptop.
2) Can someone point me to a 'ready-to-go' ROM, along with fail safe instructions on how to install it?
3) I have purchased a USB - to - IrDA port for my laptop in hopes of connecting using 'Wireless Modem', or 'wmodem.exe' (which ever I'm supposed to be using). Can someone explain more on how to actually initiate a connection using it? OK, so I'm jumping the gun a bit!
I'd also like to save my current ROM so that I can put it back the way it was, in case I need to deal with T-Mobile on warranty issues.
Thanks for your help.
Steve
You won't be able to use your device as a wireless modem with any of the new roms. They don't have the wmodem program that some of the European roms came with. So that is out. To back up your rom prior to updating is not only simple, it is a great idea. Just go here, read the forum, and grab the tools...easy... http://www.xda-developers.com/forum/viewtopic.php?t=2189
I thought I was beginning to understand. Looks like I'm still more in the dark though.
First, thanks for the link to XDATools.exe program. I have downloaded it, but it appeared to use a bunch of scripts to tell it how to work, so I didn't try to run it. From the link provided, it looks like if I simply double-click on the executable on my Win XP PC, it will bring up a wizard. I'll give it a try.
As for the wireless modem, I am totally deflated! I saw a number of posts regarding the fact that it is not in any of the WM 2003 ROMS, but I thought I could install the 'special edition' ROM from this site and get the wireless modem feature to work. Is this not the case for USA users?
I can give up if I must. But, I was hoping there would be some fruit on this vine.
Thanks again,
Steve
from what i understand then there is no specielt edition of 2003 on this site
there is however a special edition of some old 2002

Getting the HTC TyTn to work with Exchange ActiveSync/DirectPush in Japan

Here is what I've done so far. Anyone with experience or anyone who has successfully gotten their setup to work, please chime in !
1. Install the JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe rom. Test. Works fine when connected by USB, syncs to any Exchange server with no problem.
However, When I try to sync to any Exchange Server or a different Exchange server through the GPRS connection, it sits on "Synchronizing folders", then "Looking for Changes" and finally after a few minutes of doing nothing, it just gives up and goes back to "Waiting for network".
2. As a test, I've tried to install a different ROM. This time ME_DT_WWE_1182553_106_10303_Ship.exe. Now when I try to connect to the GPRS connection, it retries the dial twice, then it "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason. Check your connection settings, etc.". This is after installing the SoftBank extended ROM and doing a hard reset, which worked fine for the previous i-mate ROM.
Anyone have any suggestions or ideas?
logimob
Wireless OK
After doing some more testing, and changing back to the original i-mate ROM, it seems to sync to Exchange just fine using a Wireless connection.
However going back to GPRS, and it's back to doing exactly the same "synchronising folders"/"looking for changes".
To this date, I have never had a successful GPRS sync - has anyone else?
Japan users?
There are no Japan users with SoftBank GPRS ActiveSync working....?
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Fantastic, I'll try to install the rom at www.dopodasia.com/download/HER_DopodAsia_1237074_1060010_WWE_SHIP.exe
and see how I go. Thanks very much for your help and ideas.
Sorry to hear about your sick HTC Hermes!
logimob
Daimaou said:
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Click to expand...
Click to collapse
After flashing the Hermes with the new Dopod image, it keeps giving me a
Network Wizard error.
I tried adding the open.softbank.ne.jp settings, but it didn't work.
Then I replaced the Extended ROM with the Softbank Extended ROM. Then the settings for SoftBank were automatically configured - but don't work. It says "the current connection cannot be used for your request". Also, the network wizard comes up every soft reset and says "Your current operator (44020) is not supported. You should obtain an update from your device vendor".
This is kind of confusing - do you have any advice? Did you use the Extended ROM as it was?
Thanks very much for your help
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Hi there,
Thanks for your reply. I've been messing around on this all night/all day again, and I've made some slow painful progress!
Firstly, I'm glad you had the same problem. Now I'm reassured that the problems are not related.
Next up, I've been trying to get the internet working. I managed to get it to connect before, but whenever I tried to access any site through IE, I got the error "エラーが発生しました。リクエストが不正です。 wj46000e".
I have since done a few hard-resets, and now it doesn't connect, despite me putting in the connection details 10's of times. I now get the error "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason"
Did you ever have these kinds of problems?
What kind of extended rom are you using? I just copied and pasted the whole Softbank Extended ROM, which worked perfectly on the JASJAM ROM.
If you have any ideas, I'd be really grateful.
Thanks very much
Daimaou said:
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Click to expand...
Click to collapse
Ok so this stuff
エラーが発生しました。リクエストが不正です。 wj46000e
I also get this error while ago... actually the first time I had my X01HT and with the Japanese ROM.
I really do not know what is going on with your device, I just hardreset my HTC Universal and put ALL the setting by hands, NO cab from crap Softbank, and it WORKS !
We should maybe meet one day, and try to let me see your device...
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
logimob said:
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
Click to expand...
Click to collapse
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Daimaou said:
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Click to expand...
Click to collapse
I just tried installing the other Dopod ROM - with exactly the same results. "cannot connect for an unknown reason". This same stuff worked perfectly on the JASJAM ROM, so I am starting to think these problems are somehow ROM related.
Where did you get your ROM from again?
logimob said:
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Click to expand...
Click to collapse
This is a Rom for my universal, not my Hermes, My Hermes with a Dopod rom will be sent back to me today. And since my wife want to use the Japanese X01HT I didn't flash it to US... anyway let's meet and check this out.
Guys, are you using the standard Softbank PC Site Direct connection?
If so, you'll never get Exchange Activesync working unless you uncheck the box for "This server requires SSL" AND the Exchange administrator has configured the system to allow non-SSL connections.
Softbank's "open.softbank.ne.jp" connection is anything BUT open. They are doing port blocking and currently appear to only allow port 80, 25, 110 unless you use Pocket IE. This means that ActiveSync and most IM applications fail.
Softbank is reported to say that they plan to begin supporting Exchange ActiveSync "sometime in December" - until then, the port is closed and there is nothing you can do to make it work.
The workaround is to use [email protected] (but this can get very expensive). [email protected] does not have any port blocking.
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
I will die and rot away before these bastards open up SSL...
hguabmur said:
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
Click to expand...
Click to collapse
I have been looking through the Japanese sites as well but haven't seen anything. I just keep testing every day. Frigging bastards... I told my Exchange and networking team in the US about it and they had never heard of a Windows Mobile device that was blocked from syncing with Exchange SSL over the wireless.
I have a friend in Korea though with a Samsung WM5 device - his works with Exchange but other ports are blocked so he can't use IM apps. So Japan mobile providers are even more backwards than in Korea.
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
hiroshiy said:
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
Click to expand...
Click to collapse
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
khammo01 said:
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
Click to expand...
Click to collapse
Glad to hear it worked. Now my interest is how Softbank is going to treat PC users trying to use X01HT as a wireless modem. I personally hope they provide unlimited usage for $80-$90 per month... (after April)

Hello there, Im new around here and was hoping for some friendly help?

Hello to everyone, A quick introduction - Im new to the PDA Place if you could call it that, I personally use a Nokia N95 at the moment, And just the other day managed to get hold of an o2 XDA Exec second hand. Unfortunatly for me the devices appears to be in chinese when turned on so as you are aware theirs is not exactly much I can do with it!
I am familiar with the flashing process on Symbian phones and have done it a few times, With this knowledge in mind I thought and assumed I would need to flash this XDA Exec to an english firmware, or ROM as it seems to be called around here. I have been reading through a few threads in regards to updating and have also tried to download a new update off the o2.xda website, But it seems to keep saying I have an incorrect IMEI Number even though I have entered the correct one by typing in *#06#
I found this forum and was hoping perhaps someone would be kind enough to help me in regards to the problem I am having. I believe this device has Windows Mobile 5 and have seen and heard that Windows Mobile 6 has been released. I assume you have to purchase this much like you have to purchase a new copy of windows for a PC. Is this correct?
I had a go at the flashing process, And downloaded this EXTROM Unlocker from a buzz site? I didnt know what to do with it as its a .cab file so I downloaded KDSkamal WM5 Ultimate edition and thought well if I can at least get it to english then its a starting point at least. I double clicked the file inside and went through the update process, Then it said that it was not designed for my device, And this is where I am upto because im lost with what to do now.
Any help, information and/or advice would be most appreciated.
Thanks in advance
Hi there, whenever you try to change the ROM of one of these new Windows CE devices (all those names are the "marketing geniuses" ideas, PocketPC, Windows CE, Windows Mobile), the device verifies that you are installing the "right" type of ROM for your device, as uncle Bill would say, you cannot put anything that you shouldn't suppose to, and by "suppose to" I mean anything that they don't want you to do, I think it's enough on politics.
Anyway, if you try to change the languaje of your ROM, the bootloader will not let you to do so, so we use an special (treatened) kind of upgrading tool.
It is normally inlcuded in the ROM.
If you read the wiki, you should be able to find the whole process, well explained, right now I just can't remember the exact name of this file (something like noIdUpgrade, MaIdUpgrade, or something like this), normally all our programming gurus supply it with the cooked ROMs.
I know how frustating it is at the begining (also considering that you know Symbian), but consider that these questions arise too many times and people get the idea that you come and ask the same question that literally have been answered thousands of times and you don't even want to make some research work.
Again, read the WiKi, it's the perfect place to start with your device, when you get to know some of the jargon, you'll begin to understand many of the things discussed here.
cheers and good luck
Thankyou for the reply, I shall indeed read the wiki. Since I posted that I managed to get hold of an o2 update ROM which I tried to install, as it was doing it where it says do not disconnect it came up with ERROR 101, and that the cable had been removed when it had not. I also tried again and the same thing, Now the PDA wont turn on at all. If I try to press the hard reset buttons it says press 0, but then does nothing. At the moment it seems to be stuck on the bootloader I think you people call it. And wont come out of it :-( looks like I broke it already
Ok, quick udate after alot of messing about and research I finally flashed it, Its now on the newest version of the o2 firmware. Though now its full of o2 rubbish. I tried to install this custom one I pointed a link to in a previous post but when installing it says its not designed for my country. I assume this is in line with your reply but I tried a search for that program and it turned up nothing.
vwrmic said:
Ok, quick udate after alot of messing about and research I finally flashed it, Its now on the newest version of the o2 firmware. Though now its full of o2 rubbish. I tried to install this custom one I pointed a link to in a previous post but when installing it says its not designed for my country. I assume this is in line with your reply but I tried a search for that program and it turned up nothing.
Click to expand...
Click to collapse
Yes, O2 is full of crap. Try this thread: http://forum.xda-developers.com/showthread.php?t=320116
As I suggested in it. KDSKamal's ROM is the best. Better than official ROMs. You can find links on how to upgrade in that thread too.
---
Hey i had exactly the same problem as you, just bought an O2 Xda Exec in China, and all in Chinese but now I changed my Chinese WM5 to the KDSKamal's ROM, it works perfectly, and it seems stable.
Excellent, Thanks for the replies! I had a good play with it last night web browsing and such, I must say its so much easier than a Nokia N95 I love the software and such on it, Now if only there was a PDA/Phone that had the specifications of an N95 that would be great! I know there is the HTC Tytn but that only has a 2MP Camera I believe.
Anyway I really am pleased I got it working thankyou to everyone.
Now I know the basic process I would like to take it a step further and upgrade to Windows Mobile 6. Is there a way of doing this? I assume I need to get hold of another ROM, I admit I had a look around and found some dead links I assume due to copyright issues with Microsoft but im not sure.
Another question I had, Was I was looking around games you can get games like Riven (Myst series) And Age Of Empires which look just like the PC Version! Wow im overwhelmed by all the stuff you can get. On some of the games I have been looking at it says you need a certain graphics chip or higher in your device, May I ask what is in the Xda Exec? And if its a 3D Graphics chip thats good at running games.
How would I find out if the device is unlocked? Just popping in a card and trying? As I have a contract with T-Mobile where I get free internet, So it might be worth using my T-Mobile sim card on it instead of on o2.
The case isnt in the greatest condition, The screen and keyboard are perfect but there are a few scratches and blemishes on the case of the PDA, Is there an easy way of changing this and buying a new one to swap it with? I know it involves taking the machine apart which im comfortable with doing, Preferably getting a non o2 one would be great.
I hear about the radio and such, Does this device have a radio built into it?
Also is there anywhere I could either purchase a copy or download a copy of the manual? Im not sure how this device actually turns off, It seems to just go into standby mode when I press the power button.
Other than that, Thankyou very much so far!
again check the wiki my friend.... all answers to your questions are already posted there...

TyTN is on but calls are not getting through

I have an HTC branded TyTN and even though the phone is on and the reception shows strong the calls are not getting through. Also when I try to make calls they are droped.
This does not happen all the time but very often. I miss about half of my calls.
Anybody has any ideas?
Need a little more info to help solve your problem.
1. Where are you located.
2. Who is your service Provider
3. Has the phone ever worked right with this provider
4, How long have you had the phone and was it new or used when you got it.
5. Does it still have the same Rom and Radio on it as when you got it.
6. What versions are those.
7. Have you tried a hard reset
Answer these for starters and let's see what we can do to help you out.
I am located in Cyprus and the service provider is cytamobile-vodafone. The phone was purchased from expansys.com.cy
It worked fine for more than a year. Although this particular problem occured very rarely during the first year.
I know of at least one more person who experienced this problem for a short period of time but it was sorted out on its own.
The only update I made to the phone was installing Windows mobile 6 from the official HTC website. The phone worked fine for a few months after the update.
No other update of any rom was made.
I tried a hard reset but it did not help.
OK, and thanks for the response. Based on what you have said, my only other suggestion would be to check your version of radio installed. If you are unfamiliar with how to do that, it appears on the screen at every reboot, or, you can go to settings, device info and it is listed there. I am unfamiliar with service Providers in Cyprus, so I would suggest doing a search of the forums to see if you can find another user with your service provider and a similar phone to see which radio works best for them. If I remember right, the WM6 update from the HTC site, does flash a new radio also, and that may be the problem. If you can't find anything, start a new thread with a title like best radio for cytamobile-vodafone in Cyprus, and hopefully you will only get relevant responses from fellow countrymen.
Does anyone else have any ideas to help this fellow XDAer out? Sorry I couldn't be more help.
thank a lot steve

herald driving me crazy (gsm/gprs)

hi!
at the moment i have my third herald from o2 germany,also known as xda terra. all three have the same problem:
i use activesync and an exchange server to use push-email via gprs. but my herald decides to not let me communicate with the rest of the world. after the subway and switching the operator (o2/t-mobile d) (too) often it refuses to establish a gprs connection.
it tries, but fails... but best thing to come: it shows me full network coverage, but i can't call anybody, and anybody can call me. after a softrest, everything works again. gprs instantly, and even a normal phone call is possible.... (wohooo ) and that really annoys me, especially having a mobile phone, and nobody can call you even everything seems okay to you.
i already tried it with, and without installing the extended rom. - no change. first i thought it's probably some software i installed, but after the last hard reset i did not install anything. same problem. last idea of the o2 support was a new sim-card. but no change.
in my eyes it's a radio-rom problem, but o2 does not offer any updates, therefore there is no official way to test that. i would love to try out a custom rom and radio update, but because of warranty reasons i won't do that.
my radio-rom version is 02.85.90, does anybody know whether there are such problems with this version? OR, does anybody have any idea how to solve my problem? at the moment im really ******...
thanks in advance!

Categories

Resources