Related
I wanted to install one of the ROMs from www.yorch.net. But before doing so I have some questions:
1. If I choose to build ROM as an installer.exe, is installing it to my device as simple as running the .exe file? (of course with the device connected thru Activesync)
2. Is my present ROM (see specs below) supported?
3. If Murphy comes to visit and I screw up, will my phone be completely unusable or can I just reinstall old ROM, do hard reset and everything will be back to how it was?
My specs:
OS: Pocket PC ver 3.0.12039
ROM:3.20.06 ENG( 07/30/03) (O2 Asia I think since I bought it here in the Philippines)
Radio: 4.21.00.
Thanks
1 as far as i know yes havent don it to my own device yet though
2 a rom dont have to support a rom since it'll overwrite it
3 of cause merphy can also show his ugly face
but if all fails a sd flash reader writer can save many a tears
also if your phone is working ok then i would not mess with the
radio stack and beware because some roms include the radio stack
and if you try to update your radio stack to a US (900/1900) and you network is 900/1800 you could be in for a world of pain
ROM upgrade step by step
OK I'm really dying to give it a go but I'm just a overly cautious bloke. So I'm gonna outline what I interpreted (after reading lots of posts I think I'm getting it but not sure) to be the way do the upgrade. Please correct me if i'm wrong:
Equipment I have:
1. My notebook (Windows XP, Activesynch 3.7)
2. O2 XDAI
3. Cradle and USB connection.
Steps that I think I should take:
1. Place XDA on cradle and make sure it's connected with PC.
2. Backup?? (not so sure what to back up since contacts, calendar, notes are synched with outlook, docs are also synched, I have copies of cab and program files since I download them to PC before installing them to XDA.) If i'm missing something please slam a frying pan (this is a kitchen right?) on my head.
3. Go to www.yorch.net, check mark on all appropriate options, then (since I have to Unix box and dont know Unix at all) just go for the easy option of cooking the .exe install file.
4. Assuming, the .exe is downloaded to my PC. This time I just run it. I expect this to be just like installing PPC apps. If not, throw a tomato on my face
5. Assuming everything worked and Murphy's in the Arctic freezing his A**e off, then all I do now is hard reset.
6. I have a new ROM and I'm singing happy-happy-joy-joy.
To the wonderful people at xda-developers, am I in the right direction or am I as lost as Bill and Ted? If I'm lost, is there a step-by-step guide for non-unix programmers? (Sorry, there was a sticky but I thought it was for people with Unix boxes)
Once again, thanks for all your help and your patience.
2. Backup?? (not so sure what to back up since contacts, calendar, notes are synched with outlook, docs are also synched, I have copies of cab and program files since I download them to PC before installing them to XDA.) If i'm missing something please slam a frying pan (this is a kitchen right?) on my head.
Click to expand...
Click to collapse
well i can think of one thing to backup and thats your current rom
so if you dont like the new rom you are getting you have the option to go back
of cause if the rom you have now is downloadble from a place you know like your isp then maybe it dont matter
Thanks for the reply. That's a good point. Question: When you back up old ROM, is it just the ROM that gets backed up or is it the whole content of the device, like how you do in PCs?
Also, since no one, besides you, has made any comments regarding the steps that I outlined, is it safe to say that they are the correct steps?
Thanks
When you backup your ROM, no stuff that you customised will be in the backup - the backed up ROM will be the same as when you received it from your retail shop, or if you upgraded, it will be the upgraded ROM without any of your stuff. Do a backup and store it on your hard disk.
DON'T use the .exe cooked ROM, use a .nb1 or .nbf, and use XDA Tools from this site to do the upgrade. It's very easy that way, and less dangerous. Don't upgrade your radio stack unless you know exactly what you're doing, or your phone supplier has made an update available just for you.
If you use a T-Mobile ROM above version 4.00.05 it blocks the XDA-Tools from updating the ROM. At that point you need to use XDARIT (from this site) to low-level write the ROM image you have onto your SD card using an SD card reader which shows the card as another drive on your computer. Once you do that you need to boot into the boot-loader (press the reset button while holding the power button) and follow the prompts to restore from an SD card. If you're unlucky and are running bootloader 5.17 (or above I think) you need to write the bootloader diagnostics patch (wallaby patch from this site) onto your SD card first before doing the boot into the bootloader thing. You can then remove the SD card, write the O/S ROM onto it with XDRIT, and put it back into your phone while it's still sitting on in diagnostics mode. Then you can restore from the SD.
It sounds complicated, but it's easy, as long as you have an SD card reader, and as long as you don't mess with trying to update the bootloader or do an unknown radio update. There's lots of info in these forums if you get stuck.
I made a thread that summarised all the steps using the new tools and ROM's at this address : http://xda-developers.com/phpBB/viewtopic.php?t=3860. It's for Asian/European users, but if you are in the US the instructions are the same, except instead of using European 900/1800 radio you use 900/1900.
Further questions on ROM update
Thanks. It's becoming clearer and clearer. Have more clarifying questions:
1. How do you know whether or not you're including the radio stack with the ROM upgrade at yorch.net. I did not see any options there.
2. At www. yorch.net, nothing happens when I press the "Build ROM Now" command button. Is the download supposed to happen in the background or is there something wrong with my PC or the site?
3. I dont think I'm using the T-mobile ROM but how do I know if I'm runing bootloader 5.17? Is bootloader 5.17 only for T-Mobile users or all?
Once again, thanks for the help and bearing with a newbie.
2. At www. yorch.net, nothing happens when I press the "Build ROM Now" command button. Is the download supposed to happen in the background or is there something wrong with my PC or the site?
Click to expand...
Click to collapse
it should start to write some text about the progress of making the rom
and when it's finished then it should init a std download dialog
The meter down at the status bar does move, same as when you're loading a webpage, then it says Done. That's about it. Didnt see any other messages or dialogue boxes.
Can anyone confirm if it's up today or has it been down?
Thanks
PS. Tried to email using the email utility at the website but getting errors there as well.
OK, firstly to answer your question about Yorch's site... well it worked for me in getting all the ROM's I wanted, then when I went back again the download didn't work. I guess it's just on and off, so unless Yorch finishes getting married or someone else makes another kitchen it's a matter of pot luck. You can get away without using the kitchen if you can find another download source for ROM's, whether it be FTP or whatever. Just remember if you get an exe you can usually pull it apart with winzip to get the .nb1 or .nbf out of it.
Now, for Q1 :
An operating system ROM is generally just under 32MB, but when zipped from Yorch it's usually about 14 or 15MB - the operating system ROM will NEVER be smaller than that. I'm not sure about the exact radio stack size but I know it's a lot less than that. Also, doing some homework about the operating system ROM helps. eg. reading about the 4.01.00 ROM tells you that it's not a radio stack upgrade, it's an operating system upgrade - and the filename and the size of the file you receive reflects that.
Q2:
answered above...
Q3:
I think the bootloader is just pot-luck depending on when you phone was released. To check your bootloader it will reset your device completely, but I read somewhere that if you turn the radio (phone) off it doesn't hard reset. If you're worried, do a full backup first. But basically when you're ready to look, reset your phone while holding the power button and it will tell you the bootloader version. Don't be too turned off by that, I have read that SD card readers can be picked up very cheap if you look around, and that's all you need to get you out of trouble regardless of the bootloader version.
There's no real risk (but I won't guarantee anything), just make sure your phone is fully charged before mucking about with SD upgrades. Also make sure the radio (phone) is switched off before upgrading... using the bootloader/sd card method you shouldn't need to be concerned. I'm not sure what effect having your phone on and receiving a call while using XDA-Tools can have, but someone did mention it somewhere.
I'm a newbie too, but there's really not much you need to know, just a few caveats.
Yorch's Kitchen has been working OK for me the last couple of days. It takes maybe about 5 mins to "cook" before telling me that the ROM is ready. The 4.00.05 ROM gave me a lot of ActiveSync problems, so I went to the 4.00.16 ROM tonight and it looks like it's behaving better.
My SD reader is a Microtech Zio. It appears as a disk drive in windows, but the newer XDArit can't initialize a connection to write to the SD card. I used the "dangerous" older version of XDArit instead (available on Yorch's site), and it's worked OK for me (so far?).
One thing I wish I had realized before I started playing - going into the bootloader will reset your phone most (some?) (all?) of the time.
While I was flashing the ROM tonight I could see the GSM light flashing - I had the same "hope no one calls" feeling tht others must have had. Note that this was while I was flashing from an SD card in the bootloader - so apparently the process doesn't deactivate the phone while it's ongoing.
Muchas Gracias!
Ebswift, if ur a newbie then ur the god of the newbies. Thanks for all the help and for making me see the light. Much appreciated...
A quick Q:
Is the process for installing an .nbf file the same as that for installing an .nb1 file?
I have cooked a few ROMS to an .nb1 format and installed those OK, but now I have one in .nbf that I'd like to install.
So what I'd plan to do is put the nbf onto an SD card using XDArit, and then stick the card in the PPCPE and reboot to the loader. Is that it?
So what I'd plan to do is put the nbf onto an SD card using XDArit, and then stick the card in the PPCPE and reboot to the loader. Is that it?
Click to expand...
Click to collapse
You can do it that way (onto the SD card), or if you're not already using a T-Mobile ROM you can use XDA Tools which is easier. Basically the capabilities are spelled out for you with the available file types in the drop downs when you select a source.
Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...
Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.
www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.
Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!
What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris
I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.
The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?
never got out of it
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation
i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status
mmmm
On what ?... is the cab on the phone or on the PC ???????
i tried both , but i couldnt
You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.
Did you flashed your ROM recently?
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same
i did like that , but nothing changed , same message , install unsuccessful
shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod
i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.
I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.
thanx alot
you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device
Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?
same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.
What a numpty!
I was trying to get HTC Home Weather working thru T-Mobile UK using v1.5HTCHomeproxy0409.cab (without success), so went into the registry using Total Commander to check the Proxy settings.
Unfortunately I got as far as \\\Registry\HKLM and was trying to double click the "Software" folder but instead it went into edit folder name mode and whilst distracted by the wife managed to change the folder name to "n"
Whatever I try, I can't rename it "Software". I've tried creating a new "Software" folder and copying the files across, but a few won't copy:
/Apps/Shared/ "\Windows\mscoree.dll" and
/Apps/Shared/ "\Windows\Intellipad.dll" and
plus some .NET Compact Framework files in /Microsoft/ folder - but I'm guessing these are something the prev user had and wont affect the normal functions / programmes I will use
so... is there any way I can put the files I moved from
\\\Registry\HKLM\Software back, do I need to etc ????
Would appreciate a bit of advice from someone less accident prone!!!!
Its a (recently bought off eBay) , ex T Mob (UK I think) unbranded with HTC home etc. Can't work out how to see what version of HTCHome was on, but guess I've written over it with the proxy.cab now - the icons have changes and have lost today screen battery indicator, but that's a problem for another day!
Not sure what the ROM is, if its an original or cooked (OS ID looks normal to me, WM5?), but ExtROM looks like its been hacked by its name - dferriera WM5SE
G4 Wizard
ipl 2.21.0001
spl 2.21.0lip
gsm (radio?) 02.71.11
os 2.26.10.2 WWE
Well, if it wont change back, you can always hard reset or reflash to a new ROM...and if you do the later, all of the prerequisites have been done for you, you have HardSPL allplied already, and the correct radio ROM version for most of the ROMs, so you can flash away!
Thanks Ashasaur.
As you've probably noted from my profile and foolish behaviour, I'm new to this, does anyone mind just explaining the above comments on the ROM flash for me please?
-all of the prerequisites (?) have been done for you
-you have HardSPL (?) applied already: Is this related to the Server Proxy I've been trying to patch to HTC home for the weather fix?
-and the correct radio ROM version for most of the ROMs: does that mean I need to be careful I pick a ROM to match my radio version somehow?
If I can't find a way to rename the registry file, I'll have to go for a hard reboot, ROM flashing will be my next project once I feel I've done enough reading to understand what I'm doing and what not to do!
Thanks.
In order:
1-Prerequisites)-You have got HardSPL flashed succesfully to your device which leads to;
2-HardSPL)-Since you have a G4 device, in order to flash a non-carrier ROM you have to have HardSPL applied to your device, and you can tell that yours has been done by your IPL and SPL. Your IPL or 2.21.0001 indicates that you have a G4 Wizard, and your SPL or 2.21.Olip means that you have HardSPL applied already, otherwise you would have had to do it in order to be able to flash any ROMs...which leads to;
3-Radio)-What I mean by correct radio for most of the ROMs is that 2.71.11 is regarded as one of the more stable radio ROMs out there, and together with version 2.19.X, they are the preferred versions, though any version will work with any ROM, some work better than others.
Hope that helps!
Yes it does, thanks - especially now it has prompted me to read the wiki on hardSPL.
So maybe flashing a new ROM is not too far away...
Does the ROM contain the Windows operating system, in which case can I upgrade to WM6 / 6.1 (version currently says WM5) on my device, will I find a selection with info on what's in them on the downloads pages? (can't get access right now for some reason)
Cheers
I just did this today with my Touch Pro, it's alarmingly easy to break your device like this.
I think I have it fixed ... after I made the mistaken renaming, the device had locked up (or grown very slow) so I soft reset it. That rebuilt a large portion of the Software folder. After that, I copied the remaining keys in the renamed folder to clipboard and overwrote whatever was in the new Software folder.
Phone seems to be back to normal, but I'll be on the lookout for anything that didn't quite work. If that's the case I may have to hard reset.
@burnsy, yes, most of the download pages contain what the ROMs have in them, but I would look at my review thread in the Wizard Mobile 6 section...its called ROM Features......such such such, its got a list and ratings of the ROMs that you may find interesting.
Nice one ashasaur, sounds like just what I want. Should keep me off he streets...
Dr G, seems you're getting on a bit better than I am - my device won't let me copy all the files into the new folder. Noticed that I can receive but no longer send email, even after deleting and reinstalling my account, but that could equally have been caused by the htc home proxy files I was playing with!
I feel a hard reset coming on...