Database Users

help needed to connect mda vario to wi-fi

i have been trying to get my mda vario to connect to my aol wi-fi network for over 2 weeks.
i searched xda-developers.com and found a few usefull things but i still can't get my mda vario to connect to my wi-fi network
can sum1 plz help me, i'm goin mad here

Hello, did you mean your home Wi-fi network? If so I did have the same problem before, and now everything seems OK.
What I did was:
1. Upgrade the phone to the Qtek newest ROM (though I'm not sure if this is imperative).
2. Settings -> Connections -> Network Cards -> click SDIO WLAN Wireless Adapter, then roll down the option above "My network card connects to" -> The Internet -> OK
3. Turn on Wi-Fi, maximum Power Mode for best performance (at least to test).
--> The wireless connection should be established, given you've entered network key of your Wi-Fi network if there's any.
--> Run IE to test, in my case it should start connect to the internet without any problem.
Hope this helps,
PPB

i tried that (except upgrading the rom)
everything was goin fine.
i enterted the net work key
but then a message came up about "uable to obtain server assigned ip address. try again later or enter an ip address in network settings"

Hi,
Did you do so while connected with you PC? If so try remove the ActiveSync cable.
IP should usually be automatically assigned by your Wi-Fi router.
PPB

PROBLEM: sharing folder with WiFi...

Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?

You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.

Great! Many thanks! ;-)

whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?

I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.

Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!

Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.

Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...

The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.

Thanks man!

Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(

levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u

phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".

unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.

Connected but not...

I go ino my comm manager and enable wifi, then it picks up my security enabled linksys router. Which has worked in the past, the only thing thats changed since the last time i actually transfered any data over wifi, was installing my minisd sandisk card, and the .net network.
Whenever i try to hit any website, or check any mail connections setup in my out look i get...
"Cannot Connect
Cannot connect with current connection settings. To change your connection settings, tap settings"
Any suggestions?

Are other devices able to access the internet using wifi and this router?
Can you access your router with PIE? http://192.168.1.1
What are your settings in Settings>Connections>Connections>Advanced>Select Networks and Settings>Connections>Network Cards>Network Adapters ?
Try deleting your router entry from the list in
Settings>Connections>Network Cards>Wireless
Then establish a new connection with the router and when prompted choose
This network connects to the The Internet.

WIFI Internet Connection

Hi guys,
I've got a netopia router (Irish "eircom" broadband) and while normal internet connections via laptop or PC (with USB Wifi dongle) work fine I just can't get my XDA Mini S to actually access the internet. I have managed to actually get it to connect via WIFI however when I launch internet explorer and click on a link it says it can't access using this connection.
"Can't connect with current connection settings. To change you connection settings, tap Settings".
Under connections I'm not sure what to select as I don't believe I need to setup a modem connection or VPN - am I wrong here??
It shows "connected" in the WIFI settings, indicating my SSID etc. Could someone advise me on what else I need to set. Basically I'm obtaining an IP address and my laptop etc work fine, just wondering what more I need to do to bash internet explorer into submission on the XDA. Is is just me or are Microsoft making this very hard on the normal user..
Start--> settings -->Wireless Lan
SSID is correct.. i.e my Wireless LAN
Mode : infrastructure
BSSID is set (though I don't know what this indicates)
TX Rate :auto
Channel :7
Start--> settings -->Wireless Lan - Advanced Tab
Status : Associated to Network
MAC number given
IP address given (so I guess DHCP is working fine)
Leap tab and Enroll tab - all settings blank.
------------------------------------------------
Start --> settings --> system --. Network cards
SSID shows Connected
Under Network Adapters tab : My network card connects to the Internet.
Adapter NE2000 Compatible Ethernet Driver. (not sure what difference this makes????)
I temporarily disabled WEP for the purposes of simplifying things.

Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).

THANK YOU!
levenum said:
Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).
Click to expand...
Click to collapse
Thank you so very much I have been look for this forever!!!

thanks so much for the tip too. i've been trying to fix my wifi ever since i upgraded to windows mobile 6 and this did the trick.

wifi problem

ok heres the deal... i have a MDA flashed with the software from att for the 8125 everything works great except when i turn wifi on, i can connect to the network but cant ever get a page to work. does anyone have any suggestions????? please help

Is this happening on any network or your home network?
Check this... go to Settings - Connections - Network Cards. Make sure the WLAN Adapter is set to connect to the internet. Then tap the WLAN Adapter and make sure IP Address is set to Server Assigned then in Name Servers you don't have anything. If any of these is different, change it to the above.

Yeah. I have the same problem. I have wifi pci asus, the signal is good. I have Lan tru router and now bridged connection. I set the ip, mask and gateway which are in the status of the brudge. And the internet explorer and opera wont load pages.?!??! dns isnt set.
The network adapter is sdio wlan.., and the connection is my work network in connection > connections > advanced >select networks.
i use wm6, nbd 8.0
What could be the problem???

it is home network and all other wifi locations

i know there is a problem with secured networks, especially with wpa encryption. try to remove the encryption and see how it goes....

I have removed all encription. I tried preety much everithing and it doesnt work. All other free wifi networks work just fine, i can surf on internet.

what router do you have? i know that i could not connect to a 3com router with the wizard with any rom i tried.
try using a defined ip address and dns, meaning no dhcp. use a real dns addresses and not the default gateway...