Please help me! I have searched through the forum but did not see a possible solution.
I was upgrading my Qtek from 3.18.04 to 4.02.04. The ROM upgraded but after the reset the screen is frozen on the MS Windows Powered screen. Device is recognised by the PC (Windows XP) by active sync (4.0) connection is not established.
I tried using the XDATOOLS to transfer the NK.nbk file but can get it to boot from the SD. How do I make the device pick the file from the SD Card?
Would appreciate any help. Thanks
Related
Hi,
I have a qtek 1010 with ppc2002 os. I tried to backup my rom using osimagetool using my home computer but could not. Always got a msg like destination not found or bootloader not found. I was thinking that the cause was bootloader 5.22 but today i syncronised on my office computer and i surprisingly backed up the rom without any problems. Both my home and office computers are running on windows xp with sp2.
Also on my home computer when i tried to backup my rom on an sd card vvia a card reader/writer, bootloader seemed to back up but osimage gave an error as "could not find the path" when i tried to save it on hd.
What may be the difference between 2 computers causing osimage not to work properly?
I will be glad if someone can tell possible reasons.
Thanks
Running open touch 4.0 and I am trying to sync my music to my 4g storage card. However, when i sync the phone to my computer it only is detecting the phone but not the card on the phone. I am using Vista which seems to be a possible problem as to why it's not seeing the card. Any advice would be greatly appreciated thanks.
you need this hotfix
yep! as i said, this hot fix solves your problem on ur VISTA . unzip. and run the .exe
if you have user access control ON. say yes and continue with the installation on pc.
ok fixed it thanks. although its not working on my friends vista install so well see what happens. His computer is kinda buggy or something o wells.
Does anyone know why when I plug the phone in that the computer says USB Device Not Recognized?? I have done all the trouble shooting that HTC and HTC wiki states. I just need to get some sort of connection so I can load a ROM into it and without an activesync connection i'm screwed! Please help!!
activesync isn't needed if you flash from the phones bootloader using sd card or usb.
ok here's the stupid question, bootloader meaning the rainbow screen? also do i just load the RUU onto a sd card and open it up from the phones file explorer?
I just bought a computer that has windows 7 on it and I cant get it to recognize my 6800 also. Any suggestions to correct this?
Johnkesh said:
ok here's the stupid question, bootloader meaning the rainbow screen? also do i just load the RUU onto a sd card and open it up from the phones file explorer?
Click to expand...
Click to collapse
if you put the rom in on a card and go to bootloader it should find it for you.
Hi.
First off, I'm having no trouble syncing the HD2 in "activesync-mode".
However, when I connect the phone in diskdrive mode to use the phone as a removable storage device, vista can't find the drivers and will not install...
Does anyone have an idea what the problem could be?
Hi,
I have a Vario II that i have flashed many's a ROM on to. However i can no longer do so.
I can get as far as the confirmation screen, click Next, the progress bar appears but remains at zero then a few seconds later activesync crashes.
Flashing the ROM then fails (obviously)
Any idea's?
I have tried searching but found nothing helpful.
p.s. i am flashing via USB
I have expirienced this on the PC at my work. Our PC there has a restriction for USB Drives. The ActiveSync detects my device but when starts to flash the connection is cut. Having an error on the RRU that my USB is disconnected or remove.
Maybe you can check your PC if it can detect your device even without ActiveSync. You can go to your control panel and check if there is no undetected hardwares.
BTW, what is the OS of your PC.?
i'm using XP.
I will try to flash my Kaiser... see if that works.
i can flash my Kaiser so no issues with detection etc.
Still the same issue with my Hermes tho.
Any help appreciated.
Use the SD card flashing method. No need activesync/cable. Read wiki : http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
i had considered that but don't have a card reader. They cost pennies these days so i guess, no excuses!
Cheers.
ZootHornRollo said:
i had considered that but don't have a card reader. They cost pennies these days so i guess, no excuses!
Cheers.
Click to expand...
Click to collapse
If you still have a working WM, you can install WM5storage and make your phone act as a card reader/usb thumbdrive. You can then format and copy files normally like using a usb card reader/thumbdrive
Thats odd. Do you use the same connector on your kaiser?
Also may i ask what's your HardSPL Version..?