While conversation I can chose in right menu to turn Hand-free On and Off. I looking for a program for that, a one that can assign to a button.
Check out VJPhoneShortcuts on my webpage.
V
10x for yours response - I'm already use yours great tools, but it allow to
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email
and Not to turn Hand-free On and Off (I need it for BT Hand-free )
below is ana pp to toggle bluetooth on/off which would do what you want.
this is it below, seems to work ok on my qtek9100 but not tested it in a conversation of mapped to hardware button.
Sorry, I confused myself! I've got another app that will do this, but use the one in the above post and if you have troubles, I'll try to get it out.
V
laich71 - this is very nice program to turn ON or OFF the BT, But It does not help me.
When I received a call by press the green button (with BT is ON), I can’t ear the conversation in my BT hand free I need to choose in right menu to turn Hand-free on.
When I received a call with the BT Hand-free, and like to redirect to the speaker. I need first to redirect the conversation to the device in order to speaker can be open.
Carmi,
I think Phonealarm can do it.
Regards
Pressing the green button during a conversation for a few seconds also turns on the speaker.
Carmi said:
.... need first to redirect the conversation to the device in order to speaker can be open.
Click to expand...
Click to collapse
Related
Hello
I have an XDAIIi and am using skype. Ive found that skype outputs to the main pda speaker, not the phone speaeker, and the quality is not a good as the phone one and of course everyone can hear your conversation.
Is there anything I can do or do we have to wait for skype to support this (if they even can?)
Are there any other applications that manage to use the phone speaker?
Thanks for any feedback
Brian
Hi Brian,
I have a Skype with my XDA2i as well & if someone calls me, my XDA's earpiece was the default. If I want to use my XDA's speakerphone (handsfree or where everybody can hear the caller), all I did was to press & hold the "call" button (they also call this as "send" button, the one you press when you answer a phone call) for around 3 seconds. If I want to deactivate the speakerphone, I press the same button for about 3 seconds.
Hold & pressing "call" button for about 3 seconds will activate/deactivate speakerphone. If you still have the XDA2i user manual, kindly check page 48.
I hope this will help you.
Oneil3
you mean your skype can actually work with the earpiece or you mean normal telephone call works by default with the earpiece?
Vmirage & Brian,
I'm so sorry & it was my mistake. I did not realize what I'm typing a while ago. No, you cannot use XDA2i earpiece while on call, the default is the speakerphone (PDA's speaker). Instead, I use my XDA's earphone to have a privacy while on Skype's voice call.
I got mixed up with a normal call & the Skype's voice call.
Again, my apologies.
Oneil3
Have you tried this?
From the authors website
Please, don't even try to run it on other PDAs - it's absolutely pointless
Click to expand...
Click to collapse
So no I didn't bother
try your BT headset, as IIi support audio gateway. just press the answer button on your BT headset & the sound will be rerouted.
unfortunatly I don't have a headset and really just want to use the phone as normal
hi all,
if my mda rings, i want to be able to like 'mute' it. i can do this by 'pulling down' the volume slide button (second left from top) while a phone call comes in, but the software keeps showing that the phone is ringing.
is there a way (or software) which allows me to choose to 'mute' the call, while not interfering with my software?: like saying:
"ok i understand someones calling me, don't REJECT that someone, but let the phone ring (for that someone), while at the same time not informing me (anymore) that im being called!"
bla321 said:
hi all,
if my mda rings, i want to be able to like 'mute' it. i can do this by 'pulling down' the volume slide button (second left from top) while a phone call comes in, but the software keeps showing that the phone is ringing.
is there a way (or software) which allows me to choose to 'mute' the call, while not interfering with my software?: like saying:
"ok i understand someones calling me, don't REJECT that someone, but let the phone ring (for that someone), while at the same time not informing me (anymore) that im being called!"
Click to expand...
Click to collapse
Use the Volume button to turn off the sound when you receive a call. ( Move it up or down)
Yeah I agree... I'd like to see an IGNORE - or SILENT button like the nokia OS has.
I hate having to pull the phone out of my pocked - look at the caller and think "nah, don't wanna talk to them", and not have a button to click on...
Saying all that, after a month you get used to hitting the volume on the side... one tap and the phone stops ringing...
As far as I know - thats it...
johnny
there is a program i used to use with my nokia 6630 which ignores selected ppl's calls, its called blackballer. there are also a couple other programs out there that do the same thing, but dont know of any for PPC, will keep my eyes out though.
fone_fanatic said:
there is a program i used to use with my nokia 6630 which ignores selected ppl's calls, its called blackballer. there are also a couple other programs out there that do the same thing, but dont know of any for PPC, will keep my eyes out though.
Click to expand...
Click to collapse
hi.
i know of such a program for the ppc pe, it's called:
"Call SMS Blocker Lite v0.5.5"
http://www.aditusnet.it/crino/crisoft/prodotto.asp?id=11
The thing is, here you preset what is blocked or not, and it works OK, but:
It still does not allow you to silently surpress an incoming call AD HOC and carry on with whatever you are doing on your ppc pe :roll:
Anyone have any ideas why when a call has been completed with the Itech (S38) headset the voicedial window pops up? It happens every time a call is completed, regardless of whether the call was answered using the answer button on the headset or phone. I can't find where to disable voicedialling either as I would be happy to switch it off.
It's very annoying!
ly340077 said:
Anyone have any ideas why when a call has been completed with the Itech (S38) headset the voicedial window pops up? It happens every time a call is completed, regardless of whether the call was answered using the answer button on the headset or phone. I can't find where to disable voicedialling either as I would be happy to switch it off.
It's very annoying!
Click to expand...
Click to collapse
Does this Itech headset have a feature to allow quick switching between Home Phone and Cell Phone? Like you press a button on the headset and you choose the Home phone or Cell phone? Because my plantronics allows me to do so but I wanted to check this Itech headset out because many people are talking of it and i got recommendations to buy it.
Switching
I don't beleive so. Once paired to the device of choice it just allows call answer via the blue LED button. This button also acts as the activator for voicedialling when in standby, which is where the problem may lie? It's just confusing as when not using the blue LED button to answer a call the voicedial window still popo up when the call has ended.
Replies
Any ideas anyone?
Hello again.
I have a Motorola H320 Bluetooth handsfree (and I'm rating it 5/10 btw) .
It has 1 button.When I press it once it activates the voice dialer.
If I keep it pressed for 1 second ,it dials the last number on my recent call list.
I keep the headset in my pocket and it always get this one key pressed & dials the last number.
What I want is to disable the last call dial function of the phone. Is this possible?
Only solution I found so far is to always delete the recent call list...
Thanks in advance
(edit) I have the Faria 3.3 ROM (/edit)
the only think i can think of is to turn the headset off when you put it in your pocket
i have a jabra bt500 and i usually take mine off turn it off before i put it in my pocket and if i get a call my press and hold to turn back on the headset is probably bout 3 secs so i can answer the phone in a fair amount of time
Keland44 said:
the only think i can think of is to turn the headset off when you put it in your pocket
i have a jabra bt500 and i usually take mine off turn it off before i put it in my pocket and if i get a call my press and hold to turn back on the headset is probably bout 3 secs so i can answer the phone in a fair amount of time
Click to expand...
Click to collapse
Thanks,
I have tried that and it seems like a good solution -for battery life- but sometimes I want keep my BT On or Just forget to shut it Off ...
It would be nice to know if this can be fixed from software-side.
disable last dial
Is there anyway to tweak the bluetooth last dial when i hit twice on my bluetooth,hope someone can help...thanks..
Hello there,
has anyone an idea how to realize this:
blackstone is in standby - bluetooth is activated - bluetooth headset is on - both connected - call comes in - I take the call with the bt-headset - talk - I end the call with the bt-headset - blackstone remains on until the adjusted time for standby is reached
but I would like the blackstone switch into standby mode immediately after ending the call
is this possible ?
greetz
smuggs
This needs addressed - sleep after a call during headset mode
In headset mode the phone does not go into sleep mode or power off automatically after a call. This is a major issue for those of us who leave the phone in the pocket in the car or when using bluetooth headsets. I have finished calls recently and then 5 or 10 mins later my phone would connect to someone random in the phonebook whilst driving which is quite embarrassing "I didnt call you" - "yes you did"!!
In the meantime I am using constant device lock but this is a clumsy solution for what surely MUST be a common problem. Can anyone else not help us out and try to get the device to sleep after a call during headset mode? I would be so grateful for a useful solution that doesnt involve a constant device lock that I dont really need!
Cheers
I'm having the same problem also....
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
the_flyer said:
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
Click to expand...
Click to collapse
ooch aye the noo ...
obviously NOT ... which makes me wonder ... as for me this is a main issue
pimpin' seems to be more important than functionality ... huh?
i guess i will write to htc and see what they r saying
will post answers here
greetz
smuggs
Sounds good man, keep up posted. Its a major issue for me too!
ok folks .. here is the very annoying answer i got from htc support
You recently wrote us about an issue that you have encountered with your HTC Touch HD. There is only one way to instantly set the device into standby mode: please press quickly the power on/off.
what shall i say ... THAT'S CRAP !!!
and i'm still thinking that there must be a workaround ... redefining the buttons or something like that ... any ideas from the specialists in here ?
c'mon guys - help us out here
greetz
smuggs
that's really strange...just tested it.
connection htc/jabra bluetooth.
htc device lock ON.
an incoming call arrives, pick up the call via bt-headset. end the call via bt-headset. phone is immediately locked again (htc own device lock), display is on. after 1 minute also the display turns off.
or do you mean something completely different?
Same here and it feels retarted.
Ooe of the major purposes of a bluetooth headset is to avoid contact with the device. So having to take out the phone or handle it (in a car/office whatever) after a BT call is rediculous.
BT headset drops call
I am not sure if I should pose my questions here but my Jabra BT headset is connected to my Blackstone on standby mode via BT. However, when an incoming call comes, the BT headset does not get the call but is transfered to the HTC handset instead. I have no problems making outgoing calls on the Jabra headset. It's frustrating when I am driving... could anyone tell me how to remedy this?
Thanks in advance.
end call via BT into standby works with LockMeLite
hello there,
with LockMeLite http://forum.xda-developers.com/showthread.php?t=478606 and my samsung wep250 bt-headset
it works
this headset is non-a2dp-capable
dunno if an a2dp capable headset will work, but will test is (next week)
greetz
smuggs
I have tried flashing newer fancy roms and tried various lockers but no applications are intuitive enough to fix this simple fault. When making a call in 'headset mode' the fast sleep mode prevents accidental presses during a call. Unfortunately when the call is ended via handsfree/car kit/recipient, the phone wakes back up to life.
Any locker I have used is active indiscriminantly when pressing the power on button to wake the device from sleep. I have tried lockmelite, hd tweak for inbuilt MS lock, pocketshield and another locker however none have the function to only lock the device whilst in headset mode and after a call has ended. This is a request to developers, expert cooks and modifiers please can anyone help us out?
Thanks a million
Check this, it can do the trick...
h..p://www.pocketshield.net/default.htm
S2u2 V2.04 workes fineas you needs, even look during a call (gives black screen)
I'll do a try
As I have the same request/problem I'll try the following with the help of AGEProfile.
- I create a profile actived when the headphone is connected, when this profile is activated it launches a program named MySuspend so my phone is suspended.
- I create another profile activated when the headphone is connected and there is a call in progress, this profile does nothing but it exists (only)
So when my phone goes connected with the headset (BT) it goes suspended.
When I receive a call it wakeup as normal and the profile is switched to the second one (but does nothing)
When the call finishes, the first profile is activated again and the phone goes suspended.
That's all (and it should work, I just made the setup for that).
Regards,
P.S. sorry for my english because it's not my language.
I also have this same question. After ending the call the screen stays unlocked and will inadvertently call a number sometimes.
I tried
Yes I made a try yesterday evening in real conditions and it work very well
So I'm very happy
I forgot to mention that I also use the Inesoft to have the screen locked when one call come in.
Hope this will be useful for you too
Regards,