Hi,
Iv got a universal aka m5000, unlocked the ext. rom which is nice, although now the keyboard does not seem to work let alone TT is screwed many of time removed, re-install, 5.21 etc etc so now need to wipe it clean and start again.....
Firstly can i use any install and how do i go about im not completely stupid as i had fun with the xda2 by installin a custom rom although am stupid with this one and stuck!
any help would b great,
Cheers
Olly
Related
ok guys, ive been hanging around this forum for some time (even though i havent participated <<< bad boy =P)
the thing is my phone kinda hangs, so i have to soft reset it, but wen it loads again, it stays on the cingular splash screen and just hangs, even though the LED's on top flash, but i cant do anything, i tried soft resetting again, but same thing, i tried removing battery, also no use...so the only option i had to hard reset it..
and after the torture of restoring all the applications and contacs and info, everything was fine till it froze again, so after the soft reset, same problem occured as above... >.<
my device is an unlocked cingular 8125, no overclock no nothing...only added a 1gb mini sd...
any suggestions??
What software do you have installed? It maybe a software issue ? After a hard reset try using it a day w/o loading your software to see if the problem occurs again. Then load your software one by one until the problem comes back. That's probably what I would do.
well its no specific software, it almost happened 2day too.
the first time i did the hard reset, last install i did was install PHONEPROFILE, then the 2nd hard reset, last app i installed was morphgear. and a couple of hours ago, i resarted, it took time to load back but it finally loaded.
could this be a rom problem?
May be your minisd - reports of this have been due to the card. try it a while without the card and if it made a difference format the card on the device with storage tools (google it). Which rom are you using? an upgrade in rom may solve your problems and give you a faster device.
this is wat i get wen i click on device info:
Rom version: 1.8.11.1 WWE
rom date : 11/24/05
radio version: 01.09.11
protocol version: 4.0.13.20
extrom version: 1.8.11.103
does it look bad? =S
(the date give me the idea that the rom needs updating maybe??)
as i said, this device had no "modding", no rom upgrades, no nothing..
i bought the phone, popped in the mini sd, unlocked the device using lokiwiz 0.2b
nothing else
Would go for an aku2 rom, the official leaked cingular one ftp://xda:[email protected]_225111_22511102_022511_CWS_WWE_Ship.exe
Would suggest still try the phone without minisd in and if you do decide to upgrade rom back everything up.
as for software wise morphgear works fine on my device so i doubt its that i noticed that when i installed phonealarm on my fone it lagged to **** everything. gl on getting it fixed
ok, i searched around the forum for the definition of a rom and wat it does..
i KNOW that a rom is kinda like the basic files to run the device, but wat other jobs will it do? and wat changes will i c if i upgrade to AKU2 , and is there a ROM that has built-in arabic support? (i.e. arabic is supported w/o any 3rd party software)
--------------------------------------------------------------------------------
hey guys need ur help.i successfuly flashed my 8125 to aku 3.3 rom.it was working superbly.however i was stupid enough to run an spb back up file which i had backed up before installing aku 3.3.the phone is now not going beyond the soft reset screen.kindly advice me on wat to do.i have tried hard resetting it ,but to no avail......
dromarj said:
--------------------------------------------------------------------------------
hey guys need ur help.i successfuly flashed my 8125 to aku 3.3 rom.it was working superbly.however i was stupid enough to run an spb back up file which i had backed up before installing aku 3.3.the phone is now not going beyond the soft reset screen.kindly advice me on wat to do.i have tried hard resetting it ,but to no avail......
Click to expand...
Click to collapse
you can always sell it to me for $20
Yesterday I upgraded my BA (T-mobile MDA 3) from WM2003 to WM6. It works fine, bit I can't fix the mms prolem...tryed to instal the cabs from "cabs".rar", but simply it isn't working. The device is from croatia and works on T-mobile.
Can anyone help????
Read ALL this thread, and we'll find some answers.
Thank you....I figured out.
BUT......
I have an other problem...after every soft reset, none of the buttons is working (except the green and red call). Is there any application that bypasses the system buttons setup? I found an app <AE Button Plus>, but the functions are poor ;(
Did you hard reset after flashing the rom ? I mean the N/Y/Y option thing
yeah, I followed the steps.... Every thing is fine now.
It's really funny.....when I fix one problem, new one shows up ;(
Now I need a bluetooth manager.
i installed wm6 the other day on my spvc500 and everything went well.
the phone started, but when i gave it a restart, it just wouldnt connect to my network...
it stays in NO service state and does nothing...
i really dont know what to do...please, help me...
i'm freakin for not knowing what to do....
WM6 problem & SPVC 500
HI,
I had the same problem and I know explanations.
Problem is in software which you installed after flashing WM6 to your SPV.
When you installing software everything is working on 100% ,but after restaring mobile
phone starting very long time ,doesn't have signal and time on main screen.
You have only one option ,re-flash WM6 again ![/COLOR]
Uninstall software hasn't influence!!!
be carefully with installation new software, I don't know where is problem exactly >
Here is list of software which is working without problems on my phone:
Extreme agenda 3.02
Smart explorer 2.1.4.553
SP Task Manager 2.1.1.315
Slovo ED
Adobe reader
Don't install :
profile switcher
cele task
If you are using different software you have only one way how to find "good" and "wrong" software.
After reflashing WM6 install only one program and restart the phone if everything will be working program is OK.
But if no you have to reflash WM6 again !!!
Be careful, all your data will be lost.
I got the same problem, after installing some software i got no network anymore.
Also the menue did not respond anymore on pressing 'Start'-button
I had to flash my Amadeus again, because also a hard-reset didn't help.
Now i think i have installed all the software again and it works still well
edit: 10 minutes after i rebooted my amadeus and BANG, nothing works anymore.
Crap.
I think the problem is 'facade', a tool to show a schedule on the homescreen.
it all works now
well, i managed to solve my problem...
the thing was to flash this WM6 and now everything works jut fine...
i can finally say that i am pleased with my c500!
Before I try this Version of WM6: Do you use Facade?
I flashed my Amadeus with WM5, installed Facade, rebooted and nothing worked. After that I flashed WM 6, did not install Facade and everything is ok
I got the same problem, but after hard reset everything was ok, so reflashing WM6 was not necessary.
Hello everybody,
I have an amazing problem in my universal, It keeps freezing when going to powersave mode.
I mean in most times, I come back to my device and I found it freezing with no response, And I have to reset it or take out the battery and put it back.
And my device will never freez if he didn't go to the powersave mode,
I have tried all the solutions that I can do which includes:
1. Hard reset (didn't work)
2. Rom Upgrade (didn't work) I tried all the possible rom's including I-mate offical rom, And now I am running on ranju's 7.4 WM6.1
3. I tried a lot of radios, including 1.13 , 1.15 , 1.18 , All of them didn't solve the problem.
4. I bought a new original battery, And the problem exist.
I am asking everybody here for help, I though about buying a new pocketpc, Then I found out that my budget will not fit, Because I am still a student
So please I am waiting for some good news here,
With my best regards,