Related
I recently switched from XDAII to a TYTN.
Until now, no problems exept the calendar.
If I have like three appointments the next day, the device only shows me a maximum of two on the start screen, where on my XDAII the list was unlimited . Pretty annoying cause I'm used to see all of them when I switch my XDAII on and have an immediate overview.
Is it possible to change a setting so the calendar goes directly to the month lay out? Now I always have to toggle up via day, week, month or go via menu, view...
Also, if there are two appointments on the start screen and I tap on them, the device will always go to the "oldest" appointment.
Any settings I could change?
Thanks
No reply because it's so obviously simple or nobody knows..?
Anyone?
Come on guys, give me a tip here.
I did the normal stuff like going to start>settings>today>Items>calendar but then the "options" button is not available so I can't activate the "show all apointments".
What is a recently good and stable program to add programs/shortcuts on the today screen?
I looked into Claunch but that site is so old...
Pocket Breeze
toemke said:
Come on guys, give me a tip here.
I did the normal stuff like going to start>settings>today>Items>calendar but then the "options" button is not available so I can't activate the "show all apointments".
What is a recently good and stable program to add programs/shortcuts on the today screen?
I looked into Claunch but that site is so old...
Click to expand...
Click to collapse
I gave up on the OS Calendar today screen - no matter what options I selected, it would only display 1 day at a time... so I use PocketBreeze now... it very configurable, looks good, works well and seems compatible to WM6!
toemke said:
Come on guys, give me a tip here.
I did the normal stuff like going to start>settings>today>Items>calendar but then the "options" button is not available so I can't activate the "show all apointments".
What is a recently good and stable program to add programs/shortcuts on the today screen?
I looked into Claunch but that site is so old...
Click to expand...
Click to collapse
Not sure about the calendar issues.
Claunch may be old but it's a good one.
I use Wisbar Advance used in conjunction with Wisbar Advance Desktop. Can also be used for those cool customisations as well. Also permits multiple desktops so you can spread out your icons and plugins over several pages to save clutter. each desktop can be customised differently.
Mike
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
jomo25 said:
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
Click to expand...
Click to collapse
Thanks a lot for the answer...I've followed you tricks...but in my case the problem appears in a systematic way :-((((
I love UL but its still a tiny bit buggy. It just doesn't seem to like certain today plugins. I don't have a rhyme or reason for it, but sometimes it doesn't play nice.
PocketWeaver?
Could it be PocketWeaver? I've used UL for several months now with MANY today plugins. Currently I am using it with both PocketDigitalClock and TodayAgenda. Since PocketWeaver is the only one I haven't tried could that be what UL is not behaving well with?
At one time I had 5 plugins running in 3 tabs and UL setup has never hung for me.
lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
I noticed I couldn't get the Audio Manager plugin to work properly in UL, wouldn't expand on selection.
I have phone weaver running without issue. Phone Alarm was giving me problems and very infrequently batterystatus
rifraf1 said:
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
Click to expand...
Click to collapse
I wait several minutes...and it hangs also doing a simple INI refresh...
lightman3dd said:
I wait several minutes...and it hangs also doing a simple INI refresh...
Click to expand...
Click to collapse
UPDATE: i think to have found the reson why...I've set all the ico dimension to a "correct" dimension, like for an ICO with maximum of 48px i've set 48px and not 52 or something more and for an ico of 68 i've set 68 not more or less...and all is working weel now. I can do ini refresh and modify the settings without any phone hang.
I figured I try out UltimateLaunch and I made a new tab and added BatteryStatus today plugin. It locked up, after soft reset it locks up within a few seconds. Any ideas how I can fix this without a hard reset? Thanks
Chris
EDIT: I was able to get to the Today screen and disable UltimateLaunch after about 20 tries and some caffeine! I disabled battery status in the today screen this time and turned of the minimize in Ultimate Launch. This fixed my issues. Thanks anyway.
Chris
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
Adjust the height and add a 2nd plugin, just like you did with the 1st.
[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
If you want to have more than one today plugin on the same tab (i.e., HTC Home with another plugin underneath it) be sure to "combine" the tab.
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Thanks very much for all your help. I got it.
Maybe you Gurus can help me....
I wish to have MyFaves as a UL plug-in but it will not show up unless I have it checked in the Today screen items, then it shows up twice (once in UL & once on my Today screen). Can anyone help me? BTW I have a cooked ROM & am using DuPrade's MyFaves cab file.
dzelaya18 said:
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Click to expand...
Click to collapse
...267 if you don't have the system tray.
I too experienced some lockup issues using Battery Status. I have since unloaded it and no lockups since. I'm thinking it's anything actively monitoring the system that UL doesn't like. Although i have RLToday installed and using it for my msgs notifications, but that is a registry read.
I've got an appointment set up in Outlook on the PC for 7pm-11:30pm this evening.
When I synchronised, the home screen on the HD says "Tomorrow 19:00 - 23:30" instead of "Today"
If I tap the appointment on the home screen to enter the calendar program, it correctly shows under today's date, with nothing tomorrow.
Possible bug in TouchFlo ?
Anyone else seen this ?
Or am I being really dumb and missing something obvious ?
EDIT : After a soft reset, the word "tomorrow" vanishes. So it looks like TouchFlo failed to update the home screen properly until the device was reset.
my bug is different
I have a different bug, no mine doesnt seem to do what you say... as far as I can see...
My bug is that when you set in options to always display day, week or month view and you quit calendar and start it again, bang it goes back to Agenda view (which is rubbish)... is there a fix to get it to stay in what its asked to stay in.
truthseekers said:
I have a different bug, no mine doesnt seem to do what you say... as far as I can see...
My bug is that when you set in options to always display day, week or month view and you quit calendar and start it again, bang it goes back to Agenda view (which is rubbish)... is there a fix to get it to stay in what its asked to stay in.
Click to expand...
Click to collapse
I'm seeing the same thing. When selecting the calendar or appointment from touchflo it always takes you to the agenda view as opposed to the default view you select in the calendar.
bugsy said:
I'm seeing the same thing. When selecting the calendar or appointment from touchflo it always takes you to the agenda view as opposed to the default view you select in the calendar.
Click to expand...
Click to collapse
I was having the same issue.
I needed to reset my device (Pressing power button until it gives the pop up to turn off) and once it came back now it is working fine..
I can set it which way I want now and the setting is sticking...
...and more:
I got all of them... calender always opening in agenda view, a TOMORROW instead of a TODAY until reset, AND another one: IF you activate lets say THREE alarms, only the first one shows up on the today screen, no matter what time it is... So if it the first alarm is over, my Touch ELF's display would change to show to the next open one, but the HD does NOT. Ridiculous...
I see 4 every day all the call.!?Sync by activesync.How to delette this sync?
I too am bothered with this problem.
I want my calendar view set to Month view. So I've choosen Month view form the options and everything seems OK. However, everytime I choose calendar from the home screen it briefly starts in Month view, and then opens the agenda view.
I've tried everything I could find on the net to solve this problem, including:
- Adjusting the calendar to month view and afterwards soft-resetting my HD. Still the same problem.
- Adding -vm to the shortcut in the calendar shortcuts in the Windows directory and in the Windows/Startup directory. this opens the calendar in month view, but from the Home screen still no success.
- Searching the registry for relevant settings, but i'm not knowledgeable enough yet to find the correct ones.
By the way, if I set my calendar view to Day or Week, the same type of problem occurs.
Since I really don't like the Agenda view this really starts to annoy me.
Any other thoughts out there on something I could try?
Regards, Jack
i have the same problem! does anyone know abetter more fingerfriendly calendar program with tf3d integration?
Deixi
Strange stuff...
I don't have the problem everybody describes, but instead next day appointments show with a DS_TOMORROW: prefix instead of Tomorrow: The font is big and it occupies quite a lot of space, looks buggy and pretty annoying.
With regard to a finger friendly calendar - I used Agenda One, but it doesn't work from TF3D Home screen by default - the link needs to be edited, and I can't find the thread where the way to do it was described.
With regard to opening the calendar in the "right" view, it should be relatively easy to fix.
Searching the registry won't help because the links in RF3D seem to be hardcoded - this is the bad news.
The good news is that there's a Manila Patcher which allows to change things. If you know the arguments (somebody mentioned -vm), you can change those.
With regard to today's events prefixed with "Tomorrow", it seems that this is indeed a Manila bug, it just doesn't refresh data. You don't have to reset the device, disabling and enabling Manila is enough. This is not a workaround of course, because resetting is actualy easier, just to reiterate that TF3D is at fault.
Not 100% sure, but if I'm using the device around midnight then TF3D doesn't roll the appointments. If I'm not then it does.
Could be a complete red-herring though. . .
Does HTC have any bug tracking system available for the public, at least for submitting bugs?
Thanks for the tip on SSMaPa vangrieg!
Installed it, added "-vm" in the arguments box belonging to calendar.exe, and after some messages I am now enjoying my calendar in glorious Month view!
And before I forget, the other possible arguments are: -vd for Day view, -vw for Week view, -vy for Year view and of course -va for the dreaded Agenda view
By the way, this is what HTC Support mailed me after just one day's wait:
In order to solve your problem, you will need to hardreset your device. All data and settings will be deleted, so please back-up all your data first. Remove your SIM and memory card and go to Start, Settings, System, Clear Storage and follow the on-screen instructions.
Click to expand...
Click to collapse
Might try that some day, but for now this seems to be werking fine!
Regards, Jack
fasty said:
I've got an appointment set up in Outlook on the PC for 7pm-11:30pm this evening.
When I synchronised, the home screen on the HD says "Tomorrow 19:00 - 23:30" instead of "Today"
If I tap the appointment on the home screen to enter the calendar program, it correctly shows under today's date, with nothing tomorrow.
Possible bug in TouchFlo ?
Anyone else seen this ?
Or am I being really dumb and missing something obvious ?
EDIT : After a soft reset, the word "tomorrow" vanishes. So it looks like TouchFlo failed to update the home screen properly until the device was reset.
Click to expand...
Click to collapse
I too have this problem, and the thing at fault here is apparently the Touch Flo 3D interface. Just as described in the original post, the calendar app itself displays everything correctly, but on the Today Screen in Touch Flo, "tomorrow" entries do not change over to "today entries" when the date changes, i.e. it fails to update.
A soft reset does indeed correct the problem, but it is also sorted out if you change the calendar content in some way. This morning, for instance, I made a simple edit (changed the location variable) in one of the entries, and PRESTO! - the entries on the Today screen were properly presented.
Now, I'm not a programmer, but it seems to me that the Today screen doesn't recognise a date change as something that should trigger an update. Shouldn't it be able to force this somehow?
Speaking about Calendars, does anyone know how to change the text color of the topic while on the TFLO3D home screen.
It is a grey color and it makes it impossible to read.
Hi there, I have the same bug with Touch Flo, but no need to reset the phone. Just go in Start / Settings / Today, untick Touch Flo, do OK, this closes the Touch Flo applications. Then rego there to tick Touch Flo, this runs Touch Flo with the right information.
HTC advised me to hard-reset the device. The problem continues.
Soft resetting touch-flo does seem to cure the problem of the immediate appointment, but it is not a permanent fix.
- Steve
I have another bug in the calendar of the Touch HD.
When I create an all-day event with a reminder, it just doesn't remind me : no ring, no vibe, just the screen that is switched on, and the pop-up appear. But it works fine with a regular appointment. Do you have the same bug ?
I don't know about you guys but i wanted to test this out so i entered some false appointments for 3 days in a row and i'm on the 2nd day and it has worked wonderfully.
It doesn't say 'today' but the top rows are showing today and has 'tomorrow' for the the appointment tomorrow.
I waited till midnight and it did roll over.
Or is this problem only via syncing from Outlook or something?
I have entered a few bogus meetings for the next day on the phone itself to test out your theory and on midnight the Tomorrow tag simply stayed there.
So once again I have no idea what triggers the bug.
Anyone try already?
http://www.spbsoftwarehouse.com/pocketpc-software/mobileshell/
Here is 3.5.1 beta
http://softspb.com/ext/mobileshell/9666-351-Beta1/SpbMobileShell3.arm.cab
Key bug fixes and changes:
SPB Pocket Plus close button makes Shell unresponsive
Set Ringtone doesn't work for Contacts
6.5: Theme shows incorrectly for Carousel and Tiles views
Added current conditions threshold for weather widget
Agenda: One day is shown twice, 25 осt date is the transition to "winter" time
3D SMS viewer: First word disappears after enter
Twitter issues fixes
Kinetic scrolling doesn't stop on Asus P565
3D SMS viewer: Picture is absent.
3D viewer: Date isn't shown for SMS and Email
3D email viewer: First account always shows
Birthday widget doesn't update itself when contact info is changed
New filter category is available only after MS restart
Task widget makes task sychronization with Outlook longer
Feature: introduced default action for weather widget (now choose between "Open forecast" and "Open conditions")
http://softspb.com/ext/mobileshell/9678-3.5.1-RC1/SpbMobileShell3.arm.cab
Changes (comparing with 3.5.1 Beta1):
- Fix for a bug with empty appointment list
- Fixes in localization
- Other minor fixes
Sapa13 said:
Anyone try already?
http://www.spbsoftwarehouse.com/pocketpc-software/mobileshell/
Click to expand...
Click to collapse
It will be released tomorrow... so: No, I do not think anyone have already tried it.
i bought version 3 yesterday - and apparently you can upgrade for free - any one know how you do this?
Just download the new cab, install it and then register with your S/N
[email protected] said:
It will be released tomorrow... so: No, I do not think anyone have already tried it.
Click to expand...
Click to collapse
i think u find u can download it NOW. i already have.
there are a few neat changes. at the moment i cant connect to the facebook using the widget over data, it seems to only work over wifi.
there is a 3d sms & email app but its in the options menu and does nit work if u press on the standard sms widget (takes u to normal wm sms/email screen). and dont see an option to change this but as its just been released they may bring out a update build with the bugs fixed and maybe the option added.
u can choose to have 1,3 or 5 screens in lifestyle and professional mode, u can also choose to only have pro or lifestyle.
there is a reflections on the carousal mode and it moves by the movement sensor but both of these wont work on the x1 as gpu acceleration is disabled by the shell on x1 and it does not have the accelerometer to move the carousel.
comeradealexi said:
i bought version 3 yesterday - and apparently you can upgrade for free - any one know how you do this?
Click to expand...
Click to collapse
download the trail cab and it will update it (as a full version)
yes, i have downloaded to, and its good job done. Like that you can now edit professional layout way you want. And nice touch with the picture frame that starts slide show. 3D message not user friendly the way i hoped...
Ganondolf said:
download the trail cab and it will update it (as a full version)
Click to expand...
Click to collapse
sweet - this worked great
Will try it for sure, but I have never been a fan of it. It feels like someone else is telling me how to set up my homescreen. Same as the PointUI.
it was the best ui! now it is much better than it was now they must add dealer in 4.0!! please!!!!!!! )
@Ganondolf
there is a 3d sms & email app but its in the options menu and does nit work if u press on the standard sms widget (takes u to normal wm sms/email screen). and dont see an option to change this but as its just been released they may bring out a update build with the bugs fixed and maybe the option added.
It is possible to get to the 3D viewed Mails and texts through those widgets. If you create a new widget "Text" or "Mail" stay with your finger on it till the soft vibration. Now you can select "Standard action" (may be different in english version) and then select 3D View. Does that work for you?
I like it. Not so much I can use, but still much better.
They updated weather widget.
Carousel is much faster...but I wld lyk the new carousel :.(
And widgets look different (I actually like the old connection widget better)...
all in all good, but still things I would like to see. What is nice as well is...you have a widget called "Picture/Photo frame". That makes your layout even better!
New widget: Appointments and tasks
Click to expand...
Click to collapse
Does this mean that the spb mobile shell can finally show appointments and tasks like seen on the Xperia Panel?
Can anyone confirm this?
Edit: Just watched the promo video where they show the above. Questions answered
messaging icon doesnt work when i press it, but the other buttons work.. WHY?
oTToToTenTanz said:
@Ganondolf
there is a 3d sms & email app but its in the options menu and does nit work if u press on the standard sms widget (takes u to normal wm sms/email screen). and dont see an option to change this but as its just been released they may bring out a update build with the bugs fixed and maybe the option added.
It is possible to get to the 3D viewed Mails and texts through those widgets. If you create a new widget "Text" or "Mail" stay with your finger on it till the soft vibration. Now you can select "Standard action" (may be different in english version) and then select 3D View. Does that work for you?
Click to expand...
Click to collapse
dont not work on mine, i do this to get the 3d viewer =
to get the 3d sms/email widget. go to add widget-add shortcut-messaging-3d message viewer.
i have heard from the spb forum there is a prob on some handsets that when u reply it does not add the contact number on the text. there are a few bugs so i expect a update (3.5.1) in the next week or so to fix some of the more serious bugs.
Sapa13 said:
Anyone try already?
http://www.spbsoftwarehouse.com/pocketpc-software/mobileshell/
Click to expand...
Click to collapse
Wow, just installed and tried, great improvement and more options to customize it... really like it!
oTToToTenTanz said:
@Ganondolf
there is a 3d sms & email app but its in the options menu and does nit work if u press on the standard sms widget (takes u to normal wm sms/email screen). and dont see an option to change this but as its just been released they may bring out a update build with the bugs fixed and maybe the option added.
It is possible to get to the 3D viewed Mails and texts through those widgets. If you create a new widget "Text" or "Mail" stay with your finger on it till the soft vibration. Now you can select "Standard action" (may be different in english version) and then select 3D View. Does that work for you?
Click to expand...
Click to collapse
If you use the single wdigets (not the 3in1 thingy you know from earlier versions) you can change the standard action. just select "edit layout" (i'm not 100% sure about the terminology used to name the icons since i'm on the german version) in the bottom right menu and click and hold the widgets. a special "widget menu" will show up, that has a "standard action"-button to change whether you want to use the 3D version rather than just open the messaging app.
its possible to get 3D message on the way in the post above, but its not user friendly. For example there is no NEW massage option, im using classic view,until they fix it... but,this shell is best that i have use...
Best WM Shell so far...
There are a few thinks I would like to suggest:
- New widget download service
- RSS support (widget or something)
- 3D messaging support with full HTML included
- Facebook, Twitter news (like sms or e-mail icons)...
Is it just on my phone or is the 3D message flipping very slow?
Not very..but you know, not fluid. It annoys me. Use the standard action until it's faster.
Hi, I have searched hi and low for a solution to this problem, I only get 1 Appointment Reminder on the Home and Lock Screen. Had a XDA Orbit 2 previously which showed up coming appointments. Slide2Lock also showed up coming appointments.
Can't be leave I am the only one not satisfied with only seeing 1 Reminder
Have you tried TodayAgenda 1.5 ?
compact_bijou said:
Have you tried TodayAgenda 1.5 ?
Click to expand...
Click to collapse
No that won't work the Sense GUI needs to be tweeked the Sense overrides the Standard Windows TODAY . Cheers
This has been asked many times on here mate, but so far I have not seen a tweak to give us what we want!
You can now have 4 appointments on home tab:
forum.xda-developers.com/showthread.php?t=625483
this should help too - 5 appointments with small clock, 3 1/2 appointments with big manila clock:
http://forum.xda-developers.com/showthread.php?p=5044262#post5044262
Those two Home layouts are quite good, but I have an Work Exchange email setup which requires a Lockscreen and password (PIN) to use the phone. I actually don't want to disable PIN unlock as I understand the reason it's imposed.
This means currrent key presses with the above mods are - Tap power button - Slide padlock - Enter 4 PIN numbers - Tap padlock - Swipe screen (8 keypresses) all to see my appointments.
IF we had ability to show, say, 5 appointments on lockscreen, it would be just 1 keypress (tap power button) to see them.
Simples No?
tboy2000 said:
You can now have 4 appointments on home tab:
forum.xda-developers.com/showthread.php?t=625483
Click to expand...
Click to collapse
did think you linked to maxmanila, which is a little too bloated for me, but that tweak is actually pretty nice ... ^^
Hi All thanks for help with this, i ended up using Co0kieMonster tweak which seems to work ok.
http://forum.xda-developers.com/showthread.php?t=625483
Cheers