Related
Hi all, I am new to this forum.
I own a Dopod 900, and currently trying to get MS Voice Command to work properly with my unit. I believe one of the problem with this application is that it does not respond to command while the unit is in closed mode (the pda screen in inside). Is solution to this problem already available?
I have searched the forum but have not been able to find any solution. I apologize if I missed it, please kindly point me to that posting if there is any.
Any advise is greatly appreciated.
- Josh :?:
From what I've read so far there isn't a fix I'm afraid. It's not fully compatible with WM2005 and will just have to wait for an update from Microsoft :-(
Thanks for your reply. That's too bad. I really have high hope that there is a solution for just this one problem, as there are already tweaks for the other problems. Being unable to receive command in closed mode really make MS Voice Command very much less usable. Too bad.
- Josh
I agree, but at least it's a step up with the other voice dial (that comes it with?). Couldn't do dialling from BT headset at all on WM2003 :-(
The "closed mode" doesn't bother me as I carry the Exec round in a Krusell case, with screen up. This allows me to instantly answer the phone when it rings (having seen who's calling first on the screen).
But there are a few more annoying problems with MS Voice Command 1.5 (I have UK version) present under Windows Mobile 5.0.
This one is unique to WM5.0:
- The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
GBugger...
The following coupla' niggles are also present under WM2003/03SE.
- The days of week when answering "What date is it today" (somehow UK regional settings don't even have it, so I had to enable it in registry under NLS settings) -- all are announced correctly except Wednesday & Thursday, which are sounding simply as "Wed" and "Thu" instead of proper name.
- The signal strength for 1,2,3 and 4 "units" is announced as 30, 60, 90 and 100% correspondingly, instead of 25,50,75,100 which would seem more logical here. I don't know though if it's just caused by something real or an attempt to easily convert
That said, the application is enormously useful especially with the Krusell case, because the carrying shape for Exec in this case is PDA shape with screen up; but it's protected by screen cover of the case and you can't really write on the screen without opening the case -- so voice activation of programs and then controlling them by 5-way navigation control, is really a great way of using the Exec Examples of these programs are the eWallet (ever forgotten your PIN numbers or clothes size?) and speaking date/time, very convenient when you can't look down there.
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.
EastExpert said:
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.
Click to expand...
Click to collapse
Really, MS should have had this wrapped up ages ago. So disappointed. I want a device like the Exec, but with Voice Command fully working and A2DP sorted, and it's a shame I still can't get all this.
I was so used to the VC software on my JAM, shame the Exec is giving problems.
And I'm tired of tangling my headphones up...
MS, sort all this out already.
EastExpert said:
The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
Click to expand...
Click to collapse
Copy the outres.96.dll into the windows folder and the contact will display correctly.
I'm sorry, but no, it doesn't work for me. Same effect as without outres.96.dll. And yes, I made a soft reset after copying it to the windows dir.
So the next question now is: how to remove the file again?
If I try to delete it, Resco Explorer says "Cannot delete file 'outres.96.dll'. The process cannot access the file because another process has locked a portion of the file."
If the file is useless, then I want to remove it from the device. But it has been blocked by another process.
Thanx in advance
tomestos
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
guc925 said:
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
Click to expand...
Click to collapse
I have answered 'yes' to the security check. Nevertheless the dll doesn't work for me. So I want to remove it now, but I can't because it's blocked by some process.
Thanx in advance
tomestos
I've copied the file gnassel suggested into my Windows directory (using the explorer on my desktop pc).... rebooted the exec.. and voila.. it's working like a charm now.. My voice command shows the contact when I say : "Lookup XXXX" or when i call someone, it confirms the person and shows his information just fine. Norte I am usin the u.s. version of voice command 1.5.
Thanks gnassel !
This is a reply to my own posting above.
I did the soft reset using an application called 'psShutXP' (maybe someone knows it; one use it in order to switch off or soft reset the device). Voice Command's contacts mask doesn't worked.
A few minutes ago I soft resetted the device using the "original" reset hole. And voila: Voice Command works as expected!
So there seems to be a difference between "soft reset" using psShutXP and soft reset using the reset hole.
Sorry for the confusion. THE FILE OUTRES.96.DLL WORKS!
By the way: What exactly does outres.96.dll?
Best regards
tomestos
Many thanks gnassel, it works great..
The file was from OzVGA
Thanks for drawing attention to it and posting it, or I wouldnt have know..
Take a thanking damnit
Guys, where do I put the outres.96 dll file again? If I am using File Explorer there is a "WINDOWS" Folder from the very root with a lot of files. Is that the folder I am suposed to put the oures.96 dll file or just leave it outside in the main root?
cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)
gnassel said:
cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)
Click to expand...
Click to collapse
It's "\windows" not "C:\windows".
Best regards
tomestos
Thanks everyone. I thought for a while I have to plug it in my computer too.
Hi All,
I have a VPA Compact II (Cingular 8125) and am synchonizing this with the Exchange Server of my company.
My company have set a policy that the device is locked after 15 minutes.
My problem here is that I am using a navigation software and during my ride the device igets locked every 15 minutes. Very annoying.
Anybody knows a solution for this?
Is there a way to keep alive the device?
Thanks
Ooops.
SOrry found the solution already.
http://forum.xda-developers.com/viewtopic.php?t=47912&start=0&postdays=0&postorder=asc&highlight=
Sorry again
Must.....get......feedback.....
rogierh,
Let me know how it works. I've received zero feedback on this. I'm curious if people are using it, but just not posting feedback or if its too damn complicated and I need to refine my directions.
Justin
Hi,
I just installed and configured it as you discribed.
Unfortunately my device still gets locked up after 15 minutes (from the policy).
Till the 15 minutes are over the device is kept alive. Normally the backlight would die after 2 minutes, it now stays switched on.
Any idea?
I used the short methode of step 3.
Thanks a lot for your help.
Couple of questions first....
1) What gps software are you using?
2) When you open SKScheMa, does it say "WATCH ON" in the lower right corner?
Justin
Using TomTom.
Yes its ON
I think its a wizard or WM5 problem as it happens with me when listening to MP3s too
Sucks having a 15min lock policy, as i just set a 1hr timeout for mine and its enough to stp it irritating you much.
Is there anyway you can just "Forget" the policy or are you unable to.
Try these files...
Delete the old sksc and sksw file and try these files.
If they work, I'll post them to the original thread (which you posted in your second post). Place these files as described in steps 2 & 3. Sorry for the headache.
Let me know if this works.
Justin
Hmmm sorry to say, still the same.
It keeps the device alive till the 15 minutes policy comes in.
Might this be some other kind of trigger?
Some new files....
rogierh,
Sorry for the headaches. What I'd like to try next is have you try a new set of files. The ones you tried yesterday was supposed to prevent the device from locking by simulating the pressing of the "home" key. I'm wondering if this key doesn't work on your Wizard (I'm using a Universal). These new files will now simulate the pressing of the "enter" button. (Just so you know, when I tested this program on my JasJar/Universal, I did find that using certain "simulated" keys would not work. So maybe the "home" key doesn't work on your Wizard.).
Now this will not be the end solution. When you press the enter key when TomTom is running, it will bring up the main menu. When you press the enter button a second time, it returns you to the navigation screen. I want to test to see if SKScheMa is running properly. If it is, when you launch TomTom and don't touch anything, you should be able to see the screen cycle between the main menu and the navigation screen every 58 seconds.
Let me know if you see this behavior.
Thanks
Justin
Hi,
First of all thanks a lot that you are helping out here.
It doesn't seem to work. The screen does NOT change to the menu and back.
One comment, because I have a German device (unfortunately) , the program is in German as well. But that should not be a problem with the script I think.
You mention in your guide do click to ok button on the right top side. This closes the program and I do not find it running when looking under the started programs in settings. Is this correct?
I also tried not clicking ok, but this does not change anything.
Just trying to think with you. Is the ENTER key the same code as on your device?
BR Rogier
German.....
Thanks for the info on German. My guess is that the application name may be different (i.e. it's not TomTom Navigator but rather a German title). There's a relatively easy way to check.
First open TomTom.
Next, press the 'contacts' button.
From there, you should see the Windows Start Menu. Go to Windows Start -> Settings -> System -> Memory -> Running Programs.
There should be a list of the applications running. Do you see "TomTom Navigator" or something else?
Thanks
Justin
P.S. I think the code will work on non-english versions, but only the developer can really answer that.
The Name of TomTom Navigator is the same.
Also the SKSchema Program is in German of course :-(
Is there an other option in SKSchema I can test to see if this is working at all?
(I am waiting on a new english ROM from our IT department.)
You can experiment and create some "watch" functions/programs. I recommend that you use the program to create some test cases. Here's a link to their instructions on how to create watch programs (and scripts too):
http://s-k-tools.com/skschema/skschema.0409.htm
For example, when I learned how this program work, I created "test cases" in the watch section of the program. Some things you may want to try:
When a program is running (make it easy by using Contacts, Calendar, etc), play a sound.
Once you've created this "watch" script, SKScheMa will "watch" for the program to be launched and when I sees that it has been launched, it will continuously play a sound while the program is running.
Once you've sucessfully completed the sound test, you just start customizing it to your needs. For example, the next test may be to simulate pressing a key when the application is running. The simulation of pressing a key should prevent your device from locking. Using this test, you can see if your device still "locks" after 15 minutes.
Justin
P.S. I'm sorry you're having so much difficulty. If I can help you further (not that I've really helped you thus far), please let me know.
He no worries, I will have a look this weekend.
Many thanks.
Rogier
Unlocked device and updated to english ROM (finally).
Will test again.
simulating the pressing of the "enter" button now seems to work. COOL.
Will test with the other file now.
:-D
Ooooooo YES!!!!!
I am a Happy Man. This works now.
Seems the German Version of the Utility does not liked the script or so.
On an Englisch ROM all seems to work fine.
Thanks a lot for your help.
Rogier
Congrats....
I'm glad it worked out. I can't help but wonder....why does the language make a difference. I'm not a programmer so I guess I'll never know.
BTW, you can use SKTools to keep other programs open too. Let's say you want to keep your device alive while surfing the internet. You can develop a similar script for Pocket Internet Explorer/Opera/NetFront. I use it to keep alive TomTom and iGuidance. Take care. Justin
Thanks a lot for the tip.
Hello everybody, I am facing a strange problem. Some of my phone buttons have stopped working as they used to work before. The complete buttons on the front panel at times they work and at times they don't. The below mentioned buttons only are not working:
1. The Internet Explorer button.(Above on the right)
2. The Message button.(Above on the left)
3. The Call buttons. (The call picking and disconnecting button, below left and right) And the 4 keys along it.
And one more strange problem is the phone goes to the internet explorer by its own, at times when i open the phone it is on the internet explorer, though before going to the sleeping mode after getting locked it is on the normal screen but when i switch it on and put the password, i find it on the internet explorer screen. Pls help to resolve these problems, I'll highly appreciate you all.
The buttons would be controlled in the settings section.
But I have to agree about the IE coming up. I think its related to getting the phone out of the case on your belt and it presses itself - as it were. I've tried setting that button to nothing to see if that makes any difference.
n
Quote;
The buttons would be controlled in the settings section.
But I have to agree about the IE coming up. I think its related to getting the phone out of the case on your belt and it presses itself - as it were. I've tried setting that button to nothing to see if that makes any difference.
n
Unquote;
Thnks for the msg. Can you advise where in the settings section the changes have to be done.
Regarding IE, i believe it is not due to removing and inserting in the cover. Even when it is removed from the cover, and at times if i press the key which is right below the contact(to open contact details), It opens IE and with the call button which is the green one also.
Pls help me, I never knew atleast with this device after spending a huge amount still i will come across such problem. I am really frustrated with the device.
Anybody pls help!!!!!
Regards Pankaj
which model do u have? i am having the same problem with my Softbank X01HT / Dopod 838Pro. Also change the buttons setting does not work
care724 said:
which model do u have? i am having the same problem with my Softbank X01HT / Dopod 838Pro. Also change the buttons setting does not work
Click to expand...
Click to collapse
This may be quite wrong but I'm just wondering if you guys have programmes running in the background. You may know that just tapping on the X top right does not close programmes down fully. You need something like Magicbutton or HTC X Button installed to quickly and fully close running programmes. If you don't have such an application installed then some of these hard keys may be responding to the background programmes. It would not surprise me in this case that Internet Explorer pops up because it's never been fully closed.
Just a thought.
And if you knew all this already I apologise, but it might be useful to someone who didn't know.
Mike
mikechannon said:
This may be quite wrong but I'm just wondering if you guys have programmes running in the background. You may know that just tapping on the X top right does not close programmes down fully. You need something like Magicbutton or HTC X Button installed to quickly and fully close running programmes. If you don't have such an application installed then some of these hard keys may be responding to the background programmes. It would not surprise me in this case that Internet Explorer pops up because it's never been fully closed.
Just a thought.
And if you knew all this already I apologise, but it might be useful to someone who didn't know.
Mike
Click to expand...
Click to collapse
Thanks for your information, well i really didn't knew about this. Can you suggest where can i find this software, i am having Imate Jasjam. Would really appreciate your immediate reply.
Thanks & Regards
Pankaj Oberoi
pankajunlimited17 said:
Thanks for your information, well i really didn't knew about this. Can you suggest where can i find this software, i am having Imate Jasjam. Would really appreciate your immediate reply.
Thanks & Regards
Pankaj Oberoi
Click to expand...
Click to collapse
Not saying this is the cause of your problem but could be.
Magic Button shows running programmes and lets you fully close them:
http://www.pocketgear.com/software_detail.asp?id=7438
It will ask for you to register and give e-mail address but you do not need to, you can still download without doing all that.
There are other programmes like HTC X Button but this one works fine.
Mike
i have the same problem! maybe something funny is going on with JASJAMs... anyway, i tried pressing the IE button after resetting the device (soft reset) and it STILL says it cant find the location. it must be SOMEWHERE in the registry!
can anyone please help??
benzothegreat said:
i have the same problem! maybe something funny is going on with JASJAMs... anyway, i tried pressing the IE button after resetting the device (soft reset) and it STILL says it cant find the location. it must be SOMEWHERE in the registry!
can anyone please help??
Click to expand...
Click to collapse
Can we assume that IE works ok when you start it from the Start Menu, and that it is only when you try to start it from the hardware key it does not work?
Mike
yes thats exactly right. runs perfectly! i'm wondering if maybe the entry in the registry has gone missing...?
benzothegreat said:
yes thats exactly right. runs perfectly! i'm wondering if maybe the entry in the registry has gone missing...?
Click to expand...
Click to collapse
Given the programme is working fine, this I think will be a simple matter of remapping the key to the shortcut/programme. Unfortunately it's late here, hopefully someone else can give you the detail. If not I'll check this thread tomorrow.
Mike
benzothegreat
Go to Start>settings>Buttons>
Select button 2 and choose Internet Explorer from the drop down list below.
(If IE is already chosen then I would choose something else for button 2 (anything) tick to say ok. Try the button it should open whatever programme you selected. Now go back to the buttons menu and choose Internet Explorer for button 2 again.)
Hopefully this will work if not report back.
Mike
hi guys i have same problem my panels buttons are not woking just center buttons are wokring, its not work 2 week , then suddenly one day it work but next day again offf.... does any 1 have same problem?
please use this post - only ifg you have the bug + fix, so that itje can use it very easy on next rom !
bug:
1.) creating a CONTACT after dialing.
after dialing new number: then you can create to this new number a contact.
but then you won't see the text it self, because i think it is black on black background .... so you have to do it as blind
2.) dailer: switch between the contacts - no number is showing.
if you go to the dialer seraching for a contact, then you find one of them and then you can change the kind of phone with left/right , then normally you should see the phone number in big letters from contact, but YOU DON'T SEE THE NUMBER
3.) on connection manager - WIFi on/off button.
BUG FIX:
=======
1.+2.) use attached cab file - and install this, then it works
+ additional i had include black dialer skin files - copy to \windows
3.) on connection manager - WIFi on/off button.
-> after first activation-> look in to the comm manager -> then it works hole the time. sorry, i'm not sure which regkey had to be set, that it works from beginning.
cu camel
EDIT: Sorry, for my form - normally i would send it to the cooker, and he can do the rest in new version ...
if someone will bring it in a correct form - thanks - then a mod should delete this thread
are this bugs confirmed by other users or are only you experiencing this ones ? Would be better if you check that !
And please, summarize bug and corresponding fix / workaround to one paragraph. (Look to other ROM bug threads how they have been styled)
regards,
Martin
Its ok..somewhat
I have allready adressed the "bugs/issues/glitches" with the graphics in dialer and on other apps.
And as I have said, I will try to have them all fixed, but im working with a fixlist, and I am trying to follow the list step by step. But as I also have mentioned many times, is that when I fix some "bug" then a new one surface.
I cant fix everything, I know only so mutch, and are still learning as I do this.
I am gonna try make a rom that work for most, but stuff like I dont like this or that..really guys....I must admit I dont care.
just an example, nobody needs to feel I step on their feelings:
When ppl comes and say a rom is useless because it has iContact (or w/e) then they really gotta stop and start using that rasin that floats around in the vacum inside their heads
(I mean no offence to thread starter. I do not mind ppl trying to help out to find sollutions to issues. I have asked for it many times that if you find a issue, and if you perhaps find the sollution. Then I appreciate it if its posted, with the source of the fix. It really saves me time.
SO..basicly...I dont mind this thread, as long as it can be kept clean from reports of issues reported 30 times before...but hey, I know..wishful thinking
I have a very busy week, so I cant be so mutch active in the threads. But that dont mean I dont read it. I read every single post you guys make, and I do try to take it all serious, but...
cheers
Hi Everyone,
Found this great site looking for forums for the HD2, seems every other leads to here in some way another.
Got my HD2 on Monday with Virgin, so in 5 days I've come to find it an amazing piece of kit yet ultimately annoyed.
I've already got a list of problems and annoyances:
Having to double tap and go into the email fully so it appears read
Tapping to reply to a text yet nothing happens
When using the 'phone' keypad it types in numbers
The phone screen basically crashing so when you press a button it doesn't show the unlock screen. Thus having to take the cover off then the back, then the battery
Pressing the x in the corner of an app yet going to task manager and its still open
The over sensitivity when typing a text and showing words that don't make sense in the predictive text
Having to f**k about for ages to get wi-fi off grrr!
Having to install 3.5 compact .net. I still don't know how to do it
I understand there is a cab for the text and app for the wi-fi but surely it shouldn't be like this. I'm not a technophobe or whatever you want to call one and like to think I'm pretty clued up on tech, (That's why I bought the phone) yet I haven't a clue what a ROM does nor how to install them. I can just cope with cabs ha.
It seems Windows/HTC slogan should be 'There's a cab for that'. (not good)
Anyway rant over and Hello! I'm sure I'll be doing more learning over the next few weeks!
Dan
tips, tricks & tweaks:
http://forum.xda-developers.com/showthread.php?t=583638
rom flashing guide:
http://forum.xda-developers.com/showthread.php?t=625919
.net....3.5 download:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
to flash roms from your pc you need activesync*:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
*) for win vista/7 download "device center" instead of activesync, you'll find the link on the same page
Hi 27firesnake, hope you don't think I was being lazy. Thanks for the links though. I know I'll have to do some digging around, just thought I'd let people know of my story so far.
DanParker said:
Hi 27firesnake, hope you don't think I was being lazy. Thanks for the links though. I know I'll have to do some digging around, just thought I'd let people know of my story so far.
Click to expand...
Click to collapse
not to worry mate, this community is all about sharing and helping each other.
Hi there. I'll try to give you more "readable" info about the issues you mentioned. I'll just change the order of the questions...
Having to install 3.5 compact .net. I still don't know how to do it
You can use the official Microsoft link provided by 27firesnake, but you'll have to do some reading... The simplest way is to download a cab and install it directly on your phone. You'll fine one here (item #18). You should do this first, as many great applications (including BsB Tweak) need this system component in order to work!
I haven't a clue what a ROM does nor how to install them
Well a ROM is basically your operating system (Windows Mobile) + HTC Sense (homepage and tabs). You are currently an official RO (usually called "stock ROM" in this forum). What we need to know is what version you use? Most likely 1.43 or 1.48, which are not the latest from HTC. The most recent released ROM is 1.66 and runs smoother and might give you better experience overall, even though there no major updates (just a compilation of fixes). Anyway, some people manage to get "not yet released official ROMs" (usually called "leaked ROM") and are able to install them on their devices. The latest leaked ROM is 2.07 (that should appear on the T-Mobile HD2). Anyway, I would not recommend installing a leaked or cooked ROM for the moment, since you're still a newbie and just received your device...
Simpler answer: you should install the official ROM 1.66. Try to go on the official HTC website to do so. If your serial number is rejected, you should contact your carrier (Virgin) to know when you'll be able to download it. People here will advice you to install HSPL to be able to bypass this protection, but as I said, you should wait a bit more, when you know Windows Mobile more. To learn more about that subject, go to the link in my signature.
Having to double tap and go into the email fully so it appears read
Well this doesn't seem to be a problem, or I don't understand? The email appearing in the Mail tab are just "previews" of your email and you should tap to get in the "real" e-mail application to read them fully.
Tapping to reply to a text yet nothing happens
I don't understand. You're not able to answer to a text-SMS ?
When using the 'phone' keypad it types in numbers
Again, this doesn't appear like a problem. I mean, you should compose phone numbers when in the phone application. If you write the beginning of a number, you'll automatically see the contacts whose number begin that way. Anyway, if you prefer, you can use the People tab (then "All People") to choose a contact typing the first letter (instead of phone number).
The phone screen basically crashing so when you press a button it doesn't show the unlock screen.
Is it real crashes or just freeze? I mean, I you wait for a long time, like 1 to 5 minutes, the lockscreen doesn't come back? Many people, including myself, reported some freezes from time to time, but the new ROM 1.66 really improved thing on my side. You might look for this thread for more and this one too.
Pressing the x in the corner of an app yet going to task manager and its still open
OK, this is easy to solve. Just install the "Duttys HTC Task Manager". It will install a task manager and enable the closing of any application using the cross. You can find the cab here (tip #7).
The over sensitivity when typing a text
The latest ROM 1.66 decreases the sensitivity of the touchscreen. If you can't install it, the easy way to solve this is to install the (very recommended) tweaking application called "BsB tweak". There are a lot of simple tweaks you can ON/OFF. One of these is called "decrease sensitivity" or something like that. If it's still too sensitive, then you can install the fixes found here. Just to be sure you don't have a flawed unit, check if you touchscreen has the following problems (go see the youtube videos too).
showing words that don't make sense in the predictive text
I don't have answers for that one, but I know the predictive is not the best on this mobile. You have two options:
1 - improve your typing thanks to the less sensitive touchscreen (if you make less errors, the prediction will be more accurate )
2 - install an alternative keyboard like Touchpal or maybe Swipe...
Having to f**k about for ages to get wi-fi off grrr!
Well, there are numerous ways to solve this issue.
- you can install a shortcut on you home page for the (already installed) "Comm Manager". Comm Manager is already installed and was designed for you: it is a collection of ON/OFF switchers (wifi, bluetooth etc).
- you can install an application that simply switch wifi ON/OFF. Then you install a shortcut on your home page, so you simply tap it to enable or disable wifi. You can find an application like that here (along with a lot other more)
Hope this long post helps
Smaberg's WiFi toggle cab (sticky in the apps and themes section) is a godsend (as is the BT Toggle cab). I have the 20 shortcuts cab installed so that on the top row I have shortcuts to each of these on the homescreen, along with my two most used apps and main contact (girlfriend).
BSB tweaks is definitely recommended also.
When you type a name into the Phone dialler, it may show numbers, but it narrows your options by alpha, so providing you can spell the name you're after it works just fine. You'd have to have triple tap letter selection there otherwise, which is just far less efficient than whats on offer.
guy .. i have experience something in my device .. i was wondering why my device keep pop out the error msg like service.exe and the device.exe ..
it is quite annoying because everytime pop out those error msg .. i have to open the back cover and soft reset it .. it is very serious .. happened everyday for 3 to 5 times ..
Tapping to reply to a text yet nothing happens
Yeh, you have to wait (if lots of messages) for it to load above. You can see this by the scroll bar on the right becomming shorter.
Once it has finished loading those messages, you can tap and it will start composing.
But if you tap before those messages have loaded; it does nothing.