My 686 Update to 2003.After hard boot,Show some worlds below:
Microsoft Internal Use Only.
You have installed the WM2003 SE and that´s the normal Bootscreen of this ROM. Sadly it could not be changed.......
Stefan
Help me, what happend
You have installed the WM2003 SE and that´s the normal Bootscreen of this ROM. Sadly it could not be changed.......
Click to expand...
Click to collapse
It's mean this update is false.
How do i can update to 2003 or 2003se???
you HAVE upgraded to WM2003 SE, what is being said is that that bootscreen is NORMAL for that ROM, and it cannot be changed.
YOU HAVE WM2003SE
No ,it's aways display the screen.no change.away.
I think, may be the wrong radio version?
it is A.20.10
Related
i have upgraded my XDA with WM2003 to WM2003SE with the .EXE ROM i've got from LumpiStefan. And there are so many trouble on it. My device goes slow and often hang so I need to soft reset it many times. When I've got new message (SMS) , It doesn't appear in the screen if I turn off the screen. So , just the sound. The signal is poor. There is no wireless modem and photo contact anymore like in WM2003. What can I do with this ?? Can I go back to 4.01.12 ENG ROM (WM2003) ? How ?? Can I just run the .EXE file again ?? Which WM2003's ROM best ?? 4.01.12 ENG or 4.01.12 o2 EURO ??
irsan_donald said:
i have upgraded my XDA with WM2003 to WM2003SE with the .EXE ROM i've got from LumpiStefan. And there are so many trouble on it. My device goes slow and often hang so I need to soft reset it many times. When I've got new message (SMS) , It doesn't appear in the screen if I turn off the screen. So , just the sound. The signal is poor. There is no wireless modem and photo contact anymore like in WM2003. What can I do with this ?? Can I go back to 4.01.12 ENG ROM (WM2003) ? How ?? Can I just run the .EXE file again ?? Which WM2003's ROM best ?? 4.01.12 ENG or 4.01.12 o2 EURO ??
Click to expand...
Click to collapse
I think the WM2003SE was and is still a beta version for the Wallaby devices.
I never said, that the ROM is working perfectly.
Signal strengness should be the same as in all other versions, cause the radio stack has not changed....
You should be able to flash any other ROM via EXE-File to your device. I would suggest to make a hard reset before flashing.
In my opinion the best WM2003 ROm in English is the 4.01.12....
HTH
Stefan
LumpiStefan said:
irsan_donald said:
i have upgraded my XDA with WM2003 to WM2003SE with the .EXE ROM i've got from LumpiStefan. And there are so many trouble on it. My device goes slow and often hang so I need to soft reset it many times. When I've got new message (SMS) , It doesn't appear in the screen if I turn off the screen. So , just the sound. The signal is poor. There is no wireless modem and photo contact anymore like in WM2003. What can I do with this ?? Can I go back to 4.01.12 ENG ROM (WM2003) ? How ?? Can I just run the .EXE file again ?? Which WM2003's ROM best ?? 4.01.12 ENG or 4.01.12 o2 EURO ??
Click to expand...
Click to collapse
I think the WM2003SE was and is still a beta version for the Wallaby devices.
I never said, that the ROM is working perfectly.
Signal strengness should be the same as in all other versions, cause the radio stack has not changed....
You should be able to flash any other ROM via EXE-File to your device. I would suggest to make a hard reset before flashing.
In my opinion the best WM2003 ROm in English is the 4.01.12....
HTH
Stefan
Click to expand...
Click to collapse
So it means I can go back to WM2003 ? Or is that any change if I upgrade the radio stack to 4.21 ? mine is 4.16 where can I get wireless modem application for my device ?
I follow the instructions in another thread about upgrading to WM2005, but when I hold down the camera button and connect my phone to the USB cable, I see the following:
****
Typhoon
IPL 1.00
Typhoon
SPL 1.01.0181
Typhoon
USB
*****
I don't see the UI after the last Typhoon, and I always error out when trying to upgrade. Can anyone help me get past this point? Thanks.
you need bootloader version 1.01.0109.
google for SPVDEVS-SPL.nbf
willem
Thank you...I will download the file. After I do, how do I flash the phone?
don't install it, Wm2003 is so better than 2005, it is beta version, like longhorn... I upgraded but now I'm looking for how can I downgrade to 2003... Don't load...
Thanks for the feedback. I realized I am extremely happy with my iMate SP3 running 2003SE. I will wait to see if someone releases a non-beta WM2005 ROM before upgrading, or maybe I will just purchase a new phone.
malatyaspor said:
don't install it, Wm2003 is so better than 2005, it is beta version, like longhorn... I upgraded but now I'm looking for how can I downgrade to 2003... Don't load...
Click to expand...
Click to collapse
There is a way to downgrade b4 upgrading to 5.0 as I read from other forums. I knew you needed to make a full backup to your WM2003 SE on SD in purpose to revert back..
My SPL version is 2.00.0013 and even with SPVDEVS-SPL.nbf it don't want to come to the 1.01.0109 version... Can you help me??
The Hatred said:
My SPL version is 2.00.0013 and even with SPVDEVS-SPL.nbf it don't want to come to the 1.01.0109 version... Can you help me??
Click to expand...
Click to collapse
Don't install Wm5... Because:
1. Camera is not working. Actually working but it is so bad from Wm2003
2. Flight mode is sometimes working some times not working...
3. MMS is not there
4. Some programs is not working
5. it can be collapse suddenly ( I live it)
So, it is not good idea... Because it is not full version it is beta version... Don't load it....
40TH YEAR OF MALATYASPOR.... WE WILL BE CHAMPION....
emr said:
I will wait to see if someone releases a non-beta WM2005 ROM before upgrading
Click to expand...
Click to collapse
Someone relases a non-beta WM2005 ROM?
Thanks! :wink:
All you need is ... there http://www.spv-developers.com/forum/showthread.php?t=2196
Can I change the Wallaby's BASE-ROM from 3.04.00 ENG Microsoft (WM2003 SE) to 4.01.12 ENG O2-Euro (WM2003 Final) ??? Because few people said that the 4.01.12 is better than 3.04.00 and Final should be better then SE. :?
And which is better, the Final or SE? And is there any possibility that Wallaby can be upgraded to WM 5.0? Is there any version of ROM that compatible with Wallaby and WM 5.0? :roll:
And can I downgrade the WM2003 SE to PPC 2002 (which is my old/first version) ?
Mine is O2 XDA 1, ROM Ver. 3.04.00 ENG and Radio: 4.21, protocol 32S54 CPU ARM SA1110 RAM with 206MHz speed, RAM 64Mb, Flash 32 Mb and flash chip type 28F128, model PW10B1 and PocketPC platform.
Thank you so much for your help. [/b]
riried said:
Can I change the Wallaby's BASE-ROM from 3.04.00 ENG Microsoft (WM2003 SE) to 4.01.12 ENG O2-Euro (WM2003 Final) ???
Click to expand...
Click to collapse
Yes you can. You have to intsall the new ROM. That ends in having a clean device with th enew ROM. So all data now existing on the device will be lost.
riried said:
Because few people said that the 4.01.12 is better than 3.04.00 and Final should be better then SE. :?
And which is better, the Final or SE?
Click to expand...
Click to collapse
Depends on what you want and what you do with the device.
I would say none of the ROMs is perfect. PPC 2002 is just to old ans some important things are missing, WM2003 has the SD-Card erasing bug, and the SE does not support Volume slider, ...
So you can try all of them and stay at the version that brings most benefit to you.
riried said:
And is there any possibility that Wallaby can be upgraded to WM 5.0? Is there any version of ROM that compatible with Wallaby and WM 5.0? :roll:
Click to expand...
Click to collapse
No
riried said:
And can I downgrade the WM2003 SE to PPC 2002 (which is my old/first version) ?
Click to expand...
Click to collapse
Should be clear now....
Stefan
Thanks a lot
Thank you so much Stefan
... and one final question for you:
what will you do if you have an O2 XDA1 (Wallaby)? What kind of ROM and software that you'll put it inside your Wallaby so your Wallaby's gonna be the best/better (in your point of view of course) ? I just want to know your "mixed ingridients" ....
Cheers ....
Hi all
I have just succeeded in removing a simlock from a t-mobile MDA vario (QTEK 9100)
Now I want to get rid of the t-mobile screen etc etc
Wich of your ROM files can I use??? I am sooo confused. I saw some ROM's at Molski.biz but I'm not sure wich ROM to download to flash.
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1622
I hope you can bring some light to the darkness!!
Tnx and respect to all who develop these fantastic things!
.. OK i found out:
* my device is a G3 device...
* I need to CID unlock with lokiwiz02b...
But my biggest question remains.. wich of the molski.biz ROMS to use?
2 options:
* • RUU_Molski.Biz_226102_22610105_022511_WWE (G3 Device. IPL/SPL like: 2.xx)
OR
* • RUU_Molski.Biz_226102_22610105_022511_NLD
Or am I completely wrong?
get the WWE one thats world wide english
sdnatlst said:
get the WWE one thats world wide english
Click to expand...
Click to collapse
Mmmm OK well .. many thnx for the amswer but the question is still open.
My device states:
IPL 1.06
SPL 1.06
And here it says:
RUU_Molski.Biz_226102_22610105_022511_WWE (G3 Device. IPL/SPL like: 2.xx)
So does it upgrade my IPL/SPL?
I just want to be sure the flash of the ROM will work...
THNX a LOT!
I recommend either Molski 2.26 or KTamas / bepe AKU3.2 RC1
Menneisyys said:
I recommend either Molski 2.26 or KTamas / bepe AKU3.2 RC1
Click to expand...
Click to collapse
So Sir,
If I understand you correct I made the good choice by selecting the:
RUU_Molski.Biz_226102_22610105_022511_WWE
As the ROM that I can use for my machine?
Thnx a lot!
maanhond said:
So Sir,
If I understand you correct I made the good choice by selecting the:
RUU_Molski.Biz_226102_22610105_022511_WWE
As the ROM that I can use for my machine?
Thnx a lot!
Click to expand...
Click to collapse
yes, as it's the WWE version, as opposed to the Dutch one
Menneisyys said:
yes, as it's the WWE version, as opposed to the Dutch one
Click to expand...
Click to collapse
So I unlock CID, flash the ROM with the ROM file from molski, loose my dutch language but have a clean english one?
Sounds great, my confidence is growing...
Hopefully someone can take my doubts away so I can flash!
One question remains. Is there NO problem regarding my IPL 1.06
SPL 1.06, and the RUU_Molski.Biz_226102_22610105_022511_WWE (G3 Device. IPL/SPL like: 2.xx), maybe someone can explain in short how this works? I searched and searched without a result untill now!
Gracias!
HAi
Can anyone confirm my thoughts?
One question remains. Is there NO problem regarding my IPL 1.06
SPL 1.06, and the RUU_Molski.Biz_226102_22610105_022511_WWE (G3 Device. IPL/SPL like: 2.xx), maybe someone can explain in short how this works? I searched and searched without a result untill now!
maanhond said:
HAi
Can anyone confirm my thoughts?
One question remains. Is there NO problem regarding my IPL 1.06
SPL 1.06, and the RUU_Molski.Biz_226102_22610105_022511_WWE (G3 Device. IPL/SPL like: 2.xx), maybe someone can explain in short how this works? I searched and searched without a result untill now!
Click to expand...
Click to collapse
CID Unlock your device with LokiWiz 0.2b (and also SIM if you would like that) and after your CID is unlocked just upgrade to one of my (G3) Roms (the NLD for Dutch language and WWE if you want English).
Good luck,
Molski
HI
So I can also use your...
RUU_Molski.Biz_226102_22610105_022511_NLD ?
And your WWE?
Maanhond,
I just wanted to say that this week I used the RUU_Molski.Biz_226102_22610105_022511_WWE ROM to upgrade my Wizard which had IPL/SPL 1.x and it worked perfectly....
OK thnx
I will try today! LEt you know the results!
Wish me luck! ;-)
WOW worked pretty OK
But I can not sync with active sync now? What can be the issue?
THNX all in advance for the usefull help!
I think u should upgrade your activesync to the latest one 4.5 beta 2.
OK
I was just trying to update to the 4.2 version but that seems to hang all the time!
maanhond said:
OK
I was just trying to update to the 4.2 version but that seems to hang all the time!
Click to expand...
Click to collapse
what d u mean by "seems to hang"? do u mean the downloading of the activesync, or u have allready donloaded it but it hangs when suncing with wizard?
no it hung when installing the 4.5 version succeeded!
TNX
i have the following rom as in my profile, however must i upgrade my rom ?
or is there a better rom then mine..................?
http://wiki.xda-developers.com/index.php?pagename=HTC_Alpine_ShippedOrg
how do i download the roms if some cannot be opened
problem
i tried to install one but hanged during the installation .............
now i have no radio or no gsm .............therefore no telephone
how can i get back the radio?
There is an alpine radio ROM that you can download from
ftp://xda:[email protected]/Alpine/Extracted Rom/radio_.nbf
But if you tried burning a Himalaya ROM to your Alpine, you probably messed up your operating system and should flash your good old ROM back as well. There is no WM5 or WM6 for Alpine.
i manged to run alpine_Noid as usual and everything returned to normal ..........
thanks for your advices
help , how i can change softwere ,i have wm2003 sc to wm5
rosollini said:
help , how i can change softwere ,i have wm2003 sc to wm5
Click to expand...
Click to collapse
Nothing to Qtek 2020i???