Database Users

Enable MMS folder via Registry

Hi guys,
Question....does someone maybe know the registry settings to enable the mms folder in WM5?
Sure I know I can use a cab for it, but I am trying to find out what registry settings are needed to enable the MMS folder without installing the CAB file.
I am looking for the specific settings for a HTC Wizard, but settings from another HTC phone would be a good indication to start (I hope).
Regards, thanks and to all a very happy new year (of developing),
Molski

One of the CAB files I posted (I think) had it in it.. And I know I've seen the keys around here somewhere.. Unfortunately, I don't have an 8125 any more though, and I'm not quite finished with poking around my 8525 yet (planning on unlocking the ExtROM today so I can start deciphering CAB files).
I'll let you know what I come up with from the 8525 perspective.

I found your CAB file and I extracted it.
Unfortunately the same results as I have with the T-Mobile MMS Folder cab....it doesnt work
I install the CAB file, the MMS folder shows up, I export all the MMS Registry settings, do a hard-reset, import all the Registy settings and no MMS folder showing up.
I think it has something to do with the following registry values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
After a hard-reset and installing this CAB file every time the values are different??

Could be. I'm honestly not too sure. But whateve reg values are in that CAB I've used over countless resets.
I'm getting ready to walk out the door in a few minutes, but when I get to my buddy's place I should be able to sit down for a few and look at the CAB and see what's in there again and go from there.

Take a good look at the values I posted....I really think it has something to do with those values changing every time you install the cab after a hard-reset.
Thanks!
Molski

Which CAB file are you using? I see a couple that I've posted.. Want to make sure I'm looking at the right one..

Beside having the MMS Folder to appear, I think you should have a service provider cab in ExtRom to configure to the right Service Provider's Server or you have to manually key it.
I am not sure if Wizard is the same.

cab files like mms folder and contain the values of certification on them it cannot be integrated so far, i tried,when you install a cab like mms, it writes several numbers to the cert part of the registry,once you install another cab that contains cert values ,it just overwrites the old values .
this is why the service providers never integrates such settings.
all this values that the mms cab writes to the registry can be found in the .XML file ,but must of them are build in the setup .dll ,the dll is coded with a set of instructions ,and this are the one that enable mms.
lets say you manage to extract all the reg settings for mms,then build into a custom cab this is all fine,but now you also want to integrate lets say..smardialing,well u cant because when you export the reg settings from one it overwrites the other because they use the same address in the registry.(cert}

I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.

molski said:
I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.
Click to expand...
Click to collapse
Smart Dialing working?
When?
How?
Where?
Please tell us.

These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard

molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
yes smartdialing works .i did it a month ago....but mms no.
once you put the cert settings for one of those cabs into the default hive its fine... but if you put another cab settings from another program into it,it gets overwrited .

molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
Does this works on Universal Helmi Aku3.5 V1.3?

New edition:CeleDial 1.6 - The Best Dialing Helper for Pocket PC Pbone

This is a very usefull software for PPC phone. The writer issued a new edition just now.
Now, CeleDial utility, the best dialing helper for PPC Phone, support English UI without fully support (no English help, also).
To support other languages, e.g. French, you need an extrenal mapping table for your French Name. Just do that to enable External Mapping Table:
1. Create a Unicode text file named CeleDial.txt.
2. Fill the French Characters to Alpha Characters mapping line by line:
a àâä
e éèêê
......
and so on.
3. Put this text file into CeleDial's Folder (e.g. \Program Files\CeleDial\CeleDial.txt)
4. Reboot your device to enable the external mapping table.
5. Send your mapping table to me, if possible
http://www.yonsm.net/read.php?325

when I installed it nothing happened, it worked for me after I installed an skin
it looks great btw
got any english skin sites to share?

Hi guys I cannot file the download source on that website, can you help?

Screenshot anyone???

fire00 said:
Hi guys I cannot file the download source on that website, can you help?
Click to expand...
Click to collapse
I meant "I cannot FIND"
thx for your help.

Here you have version 1.6.668.2458 that I made english.
For WM2003(se)
Copy the celedial.dll and celedial.htm to \windows.
Edit the regitry:
[HKCU\ControlPanel\Phone]
DialpadDll="celedial.dll"
DialpadWndPrc=dword:00000099
I don't know the registry entries for Wm5/6.
Cheers

Oops forgot the zip file
Cheers

thanks man !!!!
my problem is that when using on HTC Touch then Celedial overwrites graphically the backspace button so I cannot delete entered numbers.

Google for "celedial touch" and find this:
http://translate.google.com/transla...search?q=celedial+touch&num=50&hl=en&safe=off
Cheers

hi... very nice app, is there a way to install any skins? i try to have a look on the site you post, but there is a server error.
thx
tweakradje said:
Here you have version 1.6.668.2458 that I made english.
For WM2003(se)
Copy the celedial.dll and celedial.htm to \windows.
Edit the regitry:
[HKCU\ControlPanel\Phone]
DialpadDll="celedial.dll"
DialpadWndPrc=dword:00000099
I don't know the registry entries for Wm5/6.
Cheers
Click to expand...
Click to collapse

This version will probably work OK on Htc Touch
CeleDial.1.6.722 (not completely translated though since I cannot test it)
Cheers

hi tweakradje thank you so much but at the zip there is only a html and a DLL-file. what to do with that?

I really like celedial so far (just testing)
Is there any posibillity to skin the white window? The app is great but looks very ugly.
Are there skins available jet? Or can I create some on my own?

Modify sym.txt

I can't modify my sym.txt file as it is in ROM and read only. I just installed a WWE WM6 rom and have a UK keypad layout in my Wizard and getting the wrong symbols is annoying. Anyone got a solution?

Download and use Total Commander to modify files and the registery. Use search and "keyboard layout" for more information. Here is one link about this issue:
http://forum.xda-developers.com/showthread.php?t=317240

I found it, thanks for the help. I complately forgot about that registry setting.

Recognizer...

Hi
Wonder if anyone can give me the 2 registrykeys i need to create the blockrecognizer and the other one that i cant remeber the name on
I have a swedish version and for some strange reason they have disabled the 2 inputmethods in it.
Thanks
/Magnus

Sebulba_se said:
Hi
Wonder if anyone can give me the 2 registrykeys i need to create the blockrecognizer and the other one that i cant remeber the name on
I have a swedish version and for some strange reason they have disabled the 2 inputmethods in it.
Thanks
/Magnus
Click to expand...
Click to collapse
It seems that you have always the same problem....see your post there:
http://forum.xda-developers.com/showthread.php?t=303954
good luck!

ouioui01 said:
It seems that you have always the same problem....see your post there:
http://forum.xda-developers.com/showthread.php?t=303954
good luck!
Click to expand...
Click to collapse
Ps: i remember that someone post something to disable input keyboard for TC, maybe in Tweak and tricks thread...sorry, haven't got enough time to search.

Yes i always get this problem when i buy a new phone.
So i know how to fix it i just need the registry key to enable the input type again.
So if anyone with the 2 recognizer inputs enabled could search the registry and give me the keys?
Thanks
/Magnus

Can't remember where I saw it but when I disabled my keypad I changed some stuff at
HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}
Good luck!

Thanks
This was wrong key it is the key for the Touch-keypad.
But i finally found a cab that will fix the block and letter recognizer for both Touch and Touch Cruise, and i should probably say its for the swedish version.
If you want to use another country edit the textfiles i have attached.
You should change the name of the dll file on line 10 and 18. I guess yours will be namned with your country code instead of the sw that stands for sweden.
Think you will find the msim??.dll in you windows folder.
/Magnus

Sebulba_se said:
This was wrong key it is the key for the Touch-keypad.
But i finally found a cab that will fix the block and letter recognizer for both Touch and Touch Cruise, and i should probably say its for the swedish version.
If you want to use another country edit the textfiles i have attached.
You should change the name of the dll file on line 10 and 18. I guess yours will be namned with your country code instead of the sw that stands for sweden.
Think you will find the msim??.dll in you windows folder.
/Magnus
Click to expand...
Click to collapse
Downloaded your files and renamed them to *.cab but couldn't get it to work! Any idea what I've might be doing wrong?
/Göran

Yes i know whats wrong...
The problem is that its not .cab files it is registry keys.
So you should rename them to .reg and execute them.
Then you should get a question if you want to add the key to your registry.
If thats not happening thats because you need some registry editor installed on your phone.
I use resco explorer witch is good for a loot of other things to.
Good luck
/Magnus

I went to http://www.smartmobile.se/ and got the cab file from Touch. Now the recognizer works for me - quick and painless

Sebulba_se said:
The problem is that its not .cab files it is registry keys.
So you should rename them to .reg and execute them.
Then you should get a question if you want to add the key to your registry.
If thats not happening thats because you need some registry editor installed on your phone.
I use resco explorer witch is good for a loot of other things to.
Good luck
/Magnus
Click to expand...
Click to collapse
Thanks,
Figured that out a little bit later and used resco explorer also, works nicely now
/GHurun

HTC EnlargeStartmenu on Xperia

I installed HTC Enlarge startmenu on the Xperia because it makes the startmenu and menues bigger and easier to use with fingers. But on the start menu I got the ordinary swedish icons for program and settings - but I also get the english icons and when pressing them nothing happens. How can I remove them or is there a "swedish" version of of the cab floating around ?

\windows\start menu\ ?

Rudegar said:
\windows\start menu\ ?
Click to expand...
Click to collapse
No, checked there

[b]same ****[/b]
Got the same thing here, but i think i know why, there is different files in the swedish version of enlarge startmeny.cab, but i cant find it on the xda forum, maybe you could help me raise the question where to get it...
edit 1 solved!
replace 0409mui enlarge start with the swedish one named 041D in windows folder, then delete the other one named 0409, restart and voila!

Sweet! I've been having the same problem, great with a solution

This is a similar problem: I installed the "htc_ezinputxt9.cab" to get HTC's T9 phone input SIP, which worked properly. But after the installation, I no longer get word suggestions when typing with the slide-out QWERTY. Does anyone know a fix for this? Thanks

MapleDouglas said:
This is a similar problem: I installed the "htc_ezinputxt9.cab" to get HTC's T9 phone input SIP, which worked properly. But after the installation, I no longer get word suggestions when typing with the slide-out QWERTY. Does anyone know a fix for this? Thanks
Click to expand...
Click to collapse
THE same, as U said, goto windows folder look up ezinput 0409 or whats its name, rename to 041d and then go to settings input and change language!!!
almost every thing called 0409 in win dir should be 041d for sweden versions of files, so download a rom and extract the content and copy the mui files thats named 041d...

smaberg said:
THE same, as U said, goto windows folder look up ezinput 0409 or whats its name, rename to 041d and then go to settings input and change language!!!
almost every thing called 0409 in win dir should be 041d for sweden versions of files, so download a rom and extract the content and copy the mui files thats named 041d...
Click to expand...
Click to collapse
Thanks! But the problem isn't with the actual EZInput, but when using the *keyboard*. I used to get word suggestions, and then you could press TAB+Space to select the word, but after EZInput they don't pop-up anymore...

MapleDouglas said:
Thanks! But the problem isn't with the actual EZInput, but when using the *keyboard*. I used to get word suggestions, and then you could press TAB+Space to select the word, but after EZInput they don't pop-up anymore...
Click to expand...
Click to collapse
for me it was, goto start settings input, chhoce keyboard of you choice then settings, spell correction, choose that, get the file spell corr 041d or 0409 copy to win folder and your off

smaberg said:
Got the same thing here, but i think i know why, there is different files in the swedish version of enlarge startmeny.cab, but i cant find it on the xda forum, maybe you could help me raise the question where to get it...
edit 1 solved!
replace 0409mui enlarge start with the swedish one named 041D in windows folder, then delete the other one named 0409, restart and voila!
Click to expand...
Click to collapse
For me it works great in portait mode but switching to landscape the "program" part of the menu is not there

smaberg said:
for me it was, goto start settings input, chhoce keyboard of you choice then settings, spell correction, choose that, get the file spell corr 041d or 0409 copy to win folder and your off
Click to expand...
Click to collapse
Thanks, I'll try that! But what spell correction file are you talking about? Where can it be found?

I've installed the enlarge start menu but sometimes when i restart the start menu goes right back to the same size and then i have to reinstall to get the enlarged start menu again. Has anyone had this problem?

hi,
is it possible to crate a cab files für german x1 mobile devices?
because the english version don´t work.
got these german diffrent words
Heute => today
Programme => Program files
Einstellung => Control Panel

Hi everybody,
Could some of you upload the spanish versión of the htcStartMenuService.dll.041D.mui file.
I will really appreciate it!
Thanks a lot.

jfjt100 said:
Hi everybody,
Could some of you upload the spanish versión of the htcStartMenuService.dll.041D.mui file.
I will really appreciate it!
Thanks a lot.
Click to expand...
Click to collapse
wow strong bump
Bxsteez said:
I've installed the enlarge start menu but sometimes when i restart the start menu goes right back to the same size and then i have to reinstall to get the enlarged start menu again. Has anyone had this problem?
Click to expand...
Click to collapse
does that for me too. randomly works/doesn't work. but I use SPB Mobile Shell 3 now so I don't really have to use start menu for anything.

HTC Enlarge Start Menu - Spanish
jfjt100 said:
Hi everybody,
Could some of you upload the spanish versión of the htcStartMenuService.dll.041D.mui file.
I will really appreciate it!
Thanks a lot.
Click to expand...
Click to collapse
Hi guys,
Thanks to Pool_13 I send you the mui file in spanish. After installing the program, you have to copy this file in the windows folder and deleting the original one. Soft reset and done.

I'm searching for a german version too!