Related
I have an xda2 and was always able to collect my email from our Windows SBS2000 exchange server using VPN. Now we have upgraded to Windows SBS server 2003 we cannot get mail.
We are able to log onto the VPN.
We can even use the terminal services and see the server screen, but we cannot download mail.
If we try to get mail we get the following message:-
"Messages cannot be downloaded to your mobile device. Make sure you are connected and your e-mail account settings are correct . Then, try to download messages again"
The email settings we are using are the same as those that worked with SBS2000 server.
Can anyone help please
Thanks
Sam
From what you wrote I have gotten this...
1. Using VPN to connect to work network.
2. You can access resources on work network, proving the VPN is working.
Now, how are you connecting to get your mail? POP, Exchange Mobile???
I am going to assume you have a reason for not just using Exchange Mobile via Internet, such as don't want external access to Exchange box etc. etc.
sbs2003 mail access
I am using pop3 to access.
This was the way I accessed with SBS2000 with no problems.
The settings of my XDA2 are:
email address: [email protected]
user name: [email protected]l
password: mypassword
account type: pop3
incoming mail: servername
outgoing mail: servername
When I ask it to get mail GPRS is loaded and then VPN is loaded
then I get "connecting" then after a period I get the above error message.
If I leave the email prog and go to Terminal Service I connect and see my login and I can log in.
Sam
pop3 isnt enabled by default in sbs 2003, check settings in exchange admin and in services to make sure youve got the pop3 service running
sbs2003 mail access
Thanks for your help. Pop3 was not started, and WILL NOT START I do not know why. It says look in the Event viwer but no errors appear there.
I have started Imap and that has worked and I am receiving my mail. Thanks for your help.
Sam
PS in your first email you refer to Exchange mobile via the internet.
Isv this a big deal to setup and what are the advantages.
Again thanks for your help. If you are busy please do not bother to answer the PS. I am gewtting my mail so all is ok
Thanks again
Sam
I had it working pretty much straight away, OMA is another thing. Ultimately, we moved on from Exchange Mobile as it didn't offer real-time push capability (unless using SMS).
We now use Pylon Anywhere and couldn't be happier. Not only does it do everything you want, it only costs $654 US for five users. It works with Pocket PC, Palm and Symbian (amongst others) based devices.
Outlook is officialy not supportet at mail2web live i think, but is there a way to use your desktop outlook with the free service?
currently i sync my Wizard with my Outlook and the Exchange Service, so i have all things synced between outlook and exchange indirectly, but a direct sync would be better.
Yeah, I've tried messing about with Outlook to get it to connect to the exchange server, but no luck so far. If anybody knows a way, then please post it here!
I think the only way to "hack" the service for desktop outlook would be a OMA Plugin for outlook, to sync with the Server ActiveSync.
lutzs said:
I think the only way to "hack" the service for desktop outlook would be a OMA Plugin for outlook, to sync with the Server ActiveSync.
Click to expand...
Click to collapse
Could you post any more info about this?
Ye please! would be very interrested in a solution
If you think it have such a tool you misunderstood.
There are only 2 open doors to mail2web: OWA (Outlook Web Access) and OMA (Outlook Mobile Access). We can forget OWA. OMA is for syncing PocketPCs (ActiveSync Server). So we need a plugin or tool for the desktop outlook, that make it syncing over OMA!
Is there any development in this area. I was looking to sync my web2mail with my Desktop outlook.? Is it possible at all?
Cheers
I am presently using mail2web live very successfully.
I have my comcast email forwarded to the mail2web email address and leave the messages on my comcast server to download later to outlook.
I put the mail2web server source settings into Active Sync. It somehow syncs these server settings to the pda and with my unlimited monthly cingular data plan, I get ALL of my email OTA downloaded to my PDAphone immediately as it arrives to comcast.
Works great.
Yeah, that is possible. I am getting my gmail OTA, which I have forwarded to mail2web. My question was about syncing mail2web with desktop outlook, not mobile outlook. The idea is, then I dont have to sync with PC using USB cable at all. I sync with mail2web OTA, and when I log on to outlook on my PC it will sync with mail2web. So, I dont need a physical connection between PC and handheld. :lol:
This works if you pay $1.99 to mail2web.
However I too would like a free version.
Is it $1.99 per month..?
Yes
http://services.mail2web.com/Personal/EnhancedEmail/
or something I am in the process of trying
getting ADSL with a static IP address / web address and using the OWA MS 2003 server settings, setting my PC as a server, so I can use the MSFP to directly sync in with my home PC ( I think you need XP Pro to do this though, not XP Home).
This will also allow me to VPN in and take anything from home out and about.
I should also be able to do this to e.g. play my music files from my PC on my device. Will let you know how this works.
Unfortunately I am not a software developer, but if any of you need an idea; do what I just said in a one off program that runs on any PC and cradled device - syncs 'em together via GPRS / wi-fi that would be nice.
Just to let you guys know that mail2web now offer a FREE MS Exchange based e-mail account called 'mail2web Live'. As standard you can use it with ActiveSync (...and direct push if you're using WM5).
You also get access to the usual Outlook Web Access (OWA) and Outlook Mobile Access (OMA).
I've been playing around with it for the last few days and I'm well impressed - so much so that I've upgraded to their 'personal exchange' plan - to my mind a bargain for a meagre $1.99 a month. This gets rid of the banner and google ads that do take up the best part of 1/2 of the screen in the free version as well as giving you a gig of space and a few other goodies.
Cheers,
Rik
Here's the cheap way of getting picking up emails on outlook and using direct push
Sign up for 2 email accounts, one mail2web account and another email account that uses pop3(or use an existing one).
Set up email forwarding from the pop3 account to mail2web.
Set up your outlook account to leave email on the server.
This way you get the best of both worlds.
Then set activesync to sync to both outlook and mail2web and get the emails from mail2web so thats it uses direct push.
One other thing you could do is to use an advert blocker (like adblock in firefox) this gets rid of the adverts as well.
hope that helps save some cash
thanks
wayne
Here's the cheap way of getting picking up emails on outlook and using direct push
Sign up for 2 email accounts, one mail2web account and another email account that uses pop3(or use an existing one).
Set up email forwarding from the pop3 account to mail2web.
Set up your outlook account to leave email on the server.
This way you get the best of both worlds.
Then set activesync to sync to both outlook and mail2web and get the emails from mail2web so thats it uses direct push.
One other thing you could do is to use an advert blocker (like adblock in firefox) this gets rid of the adverts as well.
hope that helps save some cash
thanks
wayne
As hedgehog1982 suggestes this is a pretty good option, especially if you have an e-mail address on your own domain. This does have a couple of drawbacks though...
(i)
When you send (or reply to) an e-mail it will come from the mail2web account and not your POP account. You can get around this by setting up both accounts on your XDA (i.e. ActiveSync for your mail2web account and SMTP to send from your own e-mail address) - however, you'll have to remember to send from the SMTP when you send and don't hit reply.
(ii)
You'll effectively get two coppies of your e-mails (one to mail2web on your XDA and one to your POP inbox) - so if you want to delete an e-mail for example you'll have to do it on both. The beauty of the ActiveSync setup is that both server and XDA sync, so if you delete/move/organise your e-mails/calendar/contacts/tasks on either, the other also updates.
There are companies out there that will give you a single (or more) Exchange account(s) on your own domain but this will cost you more - most start from about a fiver a month.
Any way to sync mail2web with Desktop outlook yet?
riktooley said:
When you send (or reply to) an e-mail it will come from the mail2web account and not your POP account. You can get around this by setting up both accounts on your XDA (i.e. ActiveSync for your mail2web account and SMTP to send from your own e-mail address) - however, you'll have to remember to send from the SMTP when you send and don't hit reply.
Click to expand...
Click to collapse
Guys how do you set in your PPC "both accounts to send from your own email-address" ? My target is to get mails pushed from my corporate exchange server and to be able to reply also using my corporates email address. But our company doesn't allow any remote access to exchange (except VPN with my notebook and OWA).
The only workaround I found is to have redirect emails from exchange server to f.e. gmail, in gmail you can set an alternative email address you can send from (it will fake my [email protected] and send it "on behalf of xx"). This way I can receive and send my emails from my PDA and it looks quite well. But - with gmail I only can pull and not push.
So using mail2web.com I could push and reading your instruction how to set that SMTP in my PDA, it should also work to reply with my corporates address, but there is no possibility to set this you described...how did you do that?
I think what he means is to setup your exchange account as POP3/IMAP, but never use it to receive, only use it to send.
Example:
1. You have ActiveSync setup with mail2web (push), and you setup gmail to forward to this account based on filtering or direct forward.
2. You setup another account with the same details as your exchange server. Have this account setup so that it never downloads. Depending on your setup, you would need to setup either POP3 or IMAP. I would suggest IMAP.
3. When you want to reply to a message, don't hit reply from your 'Outlook Messages' (that's your push email). You would compose a message and use your corporate email servers outgoing SMTP to send it.
However, since you mentioned that exchange is closed except via VPN, it makes me think that they have also closed all other ports.
It might be possible for you to install a VPN client on your device and sync that way?
Hi all, im kind of new to this but i just read about push email with exchange server and i was wondering how i could use it with my mda vario. I've already installed an updated rom with push email but i dont know how to use it. can any one fill me in on this? thanks for any help.
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Go to www.mail2web.com, sign up there. Than put the settings from the website in the Exchange Server settings in Active Sync on your PPC. Set your current email address to automatically forward your email to your mail2web email address. Enable GPRS and enable push email from the Comm Manager and bingo, push email is yours.
Ok, ive already signed up with mail2web but i want to automatically retrieve hotmail emails. i don't see an option on hotmail to forward all my emails to mail2web. am i missing something here? sorry, im inexperienced and all and these are probably lame questions and all. but please help me out. after reading that article i got hyped up in doing this. thanks for any replies.
Bitfrotter said:
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Click to expand...
Click to collapse
I've gotten DirectPush to work over WiFi... Maybe that was an earlier ROM version though... I don't recall the circumstances under which I got it to work.
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
exchange/activesync
Yes please!
Hotmail has deleted the possibility of forwarding mail automatically a few years ago in the free version, only Hotmail Plus subscribers can use this option. With gmail however it is still free. So a basic hotmail account will not be able to use Push over Exchange. You can however sign in to MSN Messenger on your device and will then be notified as soon as an email arrives on the hotmail server. This will cost you extra data charges though, since contacts coming online will also result in data transfer to your device.
Romp said:
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
Click to expand...
Click to collapse
that would be awesome if you know of a tutorial anywhere on this..
so by creating an exchange server as romp said, you can sync any email including hotmail? well that's really a bummer that microsoft disabled forwarding on hotmail. Its mainly my primary email which all my friends/family know. so it would be a miracle if anyone knew how to sync hotmail without subscribing to their hotmail plus.
Well, getting outside emails are a bit more complex. This is usually for a business, but there are plenty of POP-to-Exchange plug ins that would allow getting Hotmail emails. Of course, you would need the Hotmail Plus for the POP.
http://www.slipstick.com/exs/popconnect.htm
My answer was more concerning the Exchange Direct push question, not the hotmail one.
Where I work (yes, I did set up the Exchange system) we have GFI spam filtering and virus filtering (www.gfi.com) and they have a POP2Exchange bridge included. It just checks the account, downloads any POP emails, and drops it in the right mailbox.
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more. Unless you are in a company with Exchange or Small Business Server, its not a cheap thing to do for a home network.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
ok so if we go the mail2web route... i dont need to install exchange 2003 on a pc myself? does it only work on windows server 2003?
im interested in doing this at my job but i want to make sure it is not too difficult
edit.. well we have our own domain email addresses so the [email protected] is not an option..
any suggestions?
Romp said:
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
Click to expand...
Click to collapse
1) Agreed
2) I am the IT guy and it don't work on our server - the rootcertificate won't install to the PPC - an MS acknowledged problem............
3) Please forward ASAP !! Thanks !! :lol:
Is it a self published cert? Because you CAN get any externally issued cert to work just fine. We use a $15 GoDaddy cert with no problems.
The big screw up most people have with the cert (myself included) is that the cert is not correctly installed, even though it says it is.
Cheaper certs are called "Chained" certs. All certs need a path back to one of the big cert companies. So, companies like GoDaddy get approved to be second level cert issuers. IE on the PC will look at the cert and track it back to the main cert issuer. For example, the cert on GoDaddy goes from GoDaddy, to Starfield, to VeriCert. The VeriCert certificate is installed on all PCs.
Anyway, the problem is that the PC can follow an undefined cert path, the PPC can't. If you install the cert on the server, IE on the PC can figure out the whole path, PPC can't. So, the big thing is to make sure the MIDDLE CERTS are installed on the server. Even though everything seems fine, chances are that the middle ones are not (in this case STARFIELD)
The easiest way to find out if the cert is valid or not is try to get to your webmail on PIE. If you get a message about the cert, your server is not set up completely.
For my server, I had no luck until I found the Intermediary Cert and installed it. https://certificates.starfieldtech.com/Repository.go
Once that was done, my GoDaddy cert worked on the PPC and syncs went perfectly. Once the server has all the certs in the cert path installed, the PPC can validate each level. Until then, its clueless. Most people think you need to install the cert on the PPC. Its the server that needs it.
Does the self published cert only cause problems with direct push? I've got the "old" polling method working. I created a root CA on my server to sign the cert created for the web server and then turned that root CA into a CAB which was installed on the PPC. I should say that my phone doesn't have an AKU 2.xx rom on yet so I've not tested push mail.
This is all outlined in the following doc :
http://www.microsoft.com/technet/itsolutions/mobile/deploy/msfpdepguide.mspx
Also look at http://support.microsoft.com/kb/817379 if you are running a non sbs2003 exchange server in a configuration that doesn't have a front end/back end exchange server configuration. As there are some minor tweeks needed to the registry and to the default web server setup.
If you can do a remote Activesync, then DirectPush will work just fine.
A newbie Direct Push question:
I upgraded my 8125 ROM to the official Cingular June 19 version, and direct push SEEMS to be working great my my Hosted Exchange provider. When new email comes in to my Exchange server and/or a task / calendar / contact is changed on the desktop Outlook client, those get pushed quickly to the 8125.
Problem is, it doesn't seem to work in reverse. For example, IF I get an email pushed to me on my PDA, I read it and delete it on my PDA.....that deletion action is NOT getting syncronized back to my Exchange server. Is that by design, or is indeed something wrong?
Thanks in advance!
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
jmel said:
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
Click to expand...
Click to collapse
I appreciate your reply, but my question is beyond that......it centers around Driect Push.....my thinking is, regardless of that setting you referred to, once the email is deleted on the PDA, the PDA should "reverse-push" that deletion to the Exchange server, and mine does not seem to be doing that.
I hope that is a little clearer?
No, his answer was right. The reverse of the Push is not the same. You have to set the options as Jmel suggested. Its basically to save data.
This allows you to go through your mail, delete all your spam and crap, then update the server. Doing so immediately would be a waste. Recieving/sending emails is considered vital, deleting them...not so much.
I have upgraded to WM6 and its working like a dream. One of the features that attracted me was the html mail. Ive read all the threads however cant find any official confirmation that Exchange 2007 is a requirement to receive and display HTML mail on Pocket Outlook. My exchange Administrator/Host is insisting that its the client that displays and renders the HTML the server just sends through the code! Can anyone point me in the direction of a definitive statement that confirms this?
WM6 will display HTML email for POP/IMAP and/or Exchange 2007. It will not display HTML for Exchange 2003. This is how 2003 sends the email to the device and yes it is the ex 2003 limitation. Exchange 2007 does work well and it is a big plus. But exchange 2007 is designed to run on Windows 64 bit server vs 32 bit. So just upgrading to 2007 is not that easy for some. You can (if your company security allows) set up to receive IMAP mail from your exchange server.
There was some talk on MS technet and MS MSDN forums about a hotfix to allow 2003 to send HTML to WM6 devices, but seems MS would rather spend time on getting us to switch to Vista, Office 2007 and Exchange 2007.
I have both a production Exchange 2003 server and a test Exchange 2007 server. So far, Exchange 2007 performs great, although moving our existing 32-bit Exchange 2003 installation will be costly (new 64-bit hardware, new OS, new Exchange, new CALs, etc, etc.). But from a Windows Mobile 6 perspective, there are some interesting features Exchange 2007 enables in Outlook Mobile beyond just HTML email. One of the cooler is the "search server" feature which will search all of the email on your server, not just the last 3 days or so you may have downloaded to your device.
Also, I am connected via IMAP over SSL to my Exchange 2003 server and HTML email comes through just as expected.
--Andrew
I have my exchange server set up to retrieve the headers from the last day Via Push and then my Imap checking every 30 minutes, that way I still get notification of new emails. you may wish to try this.
ahintz said:
Also, I am connected via IMAP over SSL to my Exchange 2003 server and HTML email comes through just as expected.
--Andrew
Click to expand...
Click to collapse
Can some explain this... are you saying that even with Exchange 2003, its possible to have HTML push email? if so, how???
I recently tried to install Sprint Mobile Email on my Mogul to have it push email from my desktop Outlook program like the old Business Connection software did. I installed the desktop client and got it set up but when I try to register the device itself, it gives me an error. "Error S7122: Cannot connect to the server. Please check your connection and try again."
Anybody got a clue how to fix this? I can tell you that after 7 hours (yes, 7 hours) on the phone with 6 different people on 2 days, Sprint has no clue at all.
AdamLeonard said:
I recently tried to install Sprint Mobile Email on my Mogul to have it push email from my desktop Outlook program like the old Business Connection software did. I installed the desktop client and got it set up but when I try to register the device itself, it gives me an error. "Error S7122: Cannot connect to the server. Please check your connection and try again."
Anybody got a clue how to fix this? I can tell you that after 7 hours (yes, 7 hours) on the phone with 6 different people on 2 days, Sprint has no clue at all.[/QUOTE
Are you trying to get your business email from your outlook or are you just trying to get emails from other accounts pushed onto your phone like hotmail does?
Click to expand...
Click to collapse
I'm trying to push email from my home computer's Outlook application which is hooked up to a POP3 account. I used to be able to do this with Sprint's Business Connection which has a desktop client that interacts with Outlook to push email to the Mogul.
This is the way the new Sprint Mobile Email client is supposed to work too but it doesn't.
I just set up the Mobile email settings on my Mogul to access my POP3 directly and it worked smoothly. No desktop app, no funny settings. Configred my POP and SMTP servers and it was done. Created an account called POP in poutlook and it pushes from my webmail server just fine.
One thing I do have on my desktop Outlook is to leave a copy of the mail on the server so it doesn't pull it before Sprint pushes.