Database Users

Audio tweak that seems to make a difference - needs testing!

Hi all,
The audio on my Jam (predominantly the output from the built-in speaker) was driving me a little nuts. I was getting stuttering and clicks in programs (games), in movies (WMV) and using the phone. Also, there was a lot of stutter in the notifications for incoming calls and SMS.
In attempting to resolve this, I noticed that GB-SOFT Tweak (http://www.gb-soft.cz/XDAII/products.htm) had an
interesting setting "Higher priority for audio media". I turned on this setting, soft reset, and Wham! sounds are as
smooth as butter globally. I haven't had any noticeable negative side effects, just better sounds.
I looked into what the GB-SOFT utility is doing, and it seems to just be setting one registry value:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\Priority256
from it's default
0x100 (256) to
0x80 (128)
This apparently gives the built-in sound processing DLL (WaveDev) a higher thread priority and eliminates the skipping sound.
Can some of you guys try this out (either via the GB-SOFT utility, or manually in the registry), and confirm your results?
This got rid of one of the most annoying problems for me with my Jam (A great device).
YMMMV

I've just changed it to 80 and i'm going to do some tests tonight. I'll post again with the results...

Well, i've tested it and i found that while it does a lot of improvement on the sounds played from the back speaker (media player, ringtones etc.), it doesn't improve at all the audio quality from the front speaker. (I called a couple of friends...but it was still the same, robot, voice quality)
For the tests i went up to 500 (terrible audio, full of clicks and tsiks) and down to 20...
I'll continue the tests.... :?

Hi,
Good thing ! Thanks for the test

On my MDA Compact, the Priority256 key has the DWord value 110 (0X00006E). So I have no idea how to change the setting to 0X80 (128). Anyone know how to do this? I am interested in testing the results.

Using a registre editor like regedit I think.

I am using PHM regedit, that's how I found the settings I posted. But no idea what to put into that setting to change it to the settings posted in thsi thread. I will use the GB prog instead and see what it does.

Koksie I have the same problem with Resco explorer registry plug-in... :roll: Will try the regedit at home...
Regards,
Primoz

Koksie said:
On my MDA Compact, the Priority256 key has the DWord value 110 (0X00006E). So I have no idea how to change the setting to 0X80 (128). Anyone know how to do this? I am interested in testing the results.
Click to expand...
Click to collapse
Koksi, if that is your default, then you actually have an ever higher priority set by default then GB-SOFT Tweak sets.
Hmm, I'm wondering if some other software (Or GB-SOFT Tweak itself) else lowered my priority to 0x100 (256) causing my problems in the first place.
GB-SOFT Tweak definitely sets the value to 0x80 (128) when you turn the option on, and resets it back to 0x100 (256) when you turn it off.
Can anyone else quickly check the value of this registry setting without using GB-SOFT Tweak?

Same here. The default was 110....

my default was 256 and I know I've had terrible clicking sound when I tried to install a couple of games.

I have the same settings as Koskie. 0x6E (110) The sound from my rear speaker is ok so far no problems when playing mp3s and during alerts. So I guess I will not apply this tweak for the meantime.

my default was 100....i didnt notice any difference..(qtek s100)

My default value is 0x6E (110) - haven't tried the tweak yet.

andrewpmoore said:
my default was 256 and I know I've had terrible clicking sound when I tried to install a couple of games.
Click to expand...
Click to collapse
Andrew, if you set it to 110 you will have much better sound.
Everyone else, if you're already below 128, you're fine. Somehow a couple of devices (Andrrew, mine) got off the imate factory default (which seems to be 110) causing really bad sound.
Of course if you want some fun, you can manually set it to 256 and soft-reset to see how bad it is, then set it back ;-)

Hi everybody,
a lot of you on this thread seem to know quite a bit about registry settings and routine priorities. Could you please take a look at the problem in this one:
http://forum.xda-developers.com/viewtopic.php?p=99678#99678
Thanks!

My report:
Mine is 110 (factory default).
Set to 80, and found the sound is less clicking when hearing from the phone (talk like normal handphone, not from the speaker phone at bottom).
For sound like from Windows Media Player 10, or phone ringtones (midi), looks like the sound is a bit soft than before, but clearer.
I keep on 80.
Best regards,
Arto

hi have to report something weird! anyway a few posts up I said my default was 128... however I noticed that my mp3s seem to be playing out of sync or choppy and the quality was worse than before my ROM upgrade. when I checked the value it was set to 256. I'm not saying it is the ROM's fault as I have also installed/tried some other apps after the ROM upgrade and maybe these apps were responsible for lowering the audio quality for my JAM (maybe for performance purpose) anyway I've set it back to 128 and the sound is better. Maybe for people just about to do the ROM upgrade can check the before and after value so we know if it is the ROM doing the changing or just some apps.

THANKS SO MUCH FOR A GREAT THREAD!
After posting this same question here (BA Forum) and at howard forums I finally found this thread. I had the bad clicking/skipping during mp3 in WMP and during wav playback in the voice in GPS nav. My setting was 128 but I already installed the GB-Soft tweak. I still had the poor performance. I adjusted down to 110 and all problems seem to be gone. It definitely was some devious app that made a change because my device did not do this for a long time then it suddenly began. BTW, I have a pda2k not Jam. Anyway, thanks so much to all for a solution this was driving me nuts.

Thanks for the HACK !!
My device had the default value of 110, changed to 80. There's a definite improvement in the audio quality.
Thanks again.

HTC (wizard or more) CAMERA TWEAK WORKING

Increase camera frames per second
This tweak will let you increase the frames per second of the video camera to make more fluent movies:
HKey Local Machine\Software\HTC\Camera\ReParam\MP4Large (or Medium or Small).
Change the FrameRate value
in HKey Local Machine\Software\HTC\Camera there are a lot of options for the camera capture , framerate, bitrate, time to write and much more..

what sort of value will it work?

But, Wizard have only small and medium capture options!
Wonderfull if can capture as large (320*40)... but I think is not possible because have a low CPU speed.

the standard value is 10.. i have heard that above 19 it is laggy .. so i have it on 19 frames, and i think the high option for capture video can be unlocked in some kind of way in the registery.

cpu speed is one thing but I think that memory speed can also be bottleneck for better quality video...

less frames and better video quality should be no problem, only thing is how to get it unlocked. im still trying. anyone interested

Newbie Question
Is there a limit on the video lengths that the Wizard/K-Jam/MDA/Qtek9100's can record up to? Or can it record unlimited lengths of video as long as there is memory space to save it to....?

on the wizard it is unlimited; depending on your memory space. if you take a look at the registery you can change a lot of things, i think you can even set a limit

take a look here "HKey Local Machine\Software\HTC\Camera" with a registery editor, if u guys don't have one, i can post it. or any other apps with ©®á©K$. :lol: just keeping the PDA scene alive. :shock:

can someone PLZ make and send me a backup of his HTC Wizard working "HKey Local Machine\Software\HTC\Camera" whole registery folder. (export option) i F***** up my registery trying to tweak it without making a backup of it now i can't use my camera :shock: :shock: :shock:

Here you go, Hey is ther a way maybe you can get it to focus more

i reinstalled my rom lost all my tweaks.. but o well the cam is working. ~hmm i had done something and my audio was gone and i couldnt open any settings as well, anyway thnx . i have a t-mobile camera fix wich disables the blue camera snow effect and maybe focus fix. ill send it

thanas said:
i have a t-mobile camera fix wich disables the blue camera snow effect and maybe focus fix. ill send it
Click to expand...
Click to collapse
I'd like to see that. I hate the quality of the camera. If you have something to make it better I can't wait.

2 different t-mobile camera patches ( they really work )

this one is older :lol:

it is very weird but not all wizards have the same camera quality, i don't mean that qtek 9100 is different than a mda vario, but sometimes even the same variant. i have a mda vario (latest qtek rom with camera patch) and it takes good pictures, a friend of mine has the same phone rom and patch and his pictures are VERY blurry compared to mine.

this seems to work. How can i see the difference?

Thank you! My camera quality in low light was horrible! It works great now.

jwzg said:
Thank you! My camera quality in low light was horrible! It works great now.
Click to expand...
Click to collapse
What patch version?
Thanks

New version....

Alt SMS tones ..

Anyone got an old SMS tone - like the old Nokia phones have ?
Cheers
Mark

You mean the 'beep-beep, beep-beep' one? If so I think I might have a midi of it somewhere...

mosgeo said:
You mean the 'beep-beep, beep-beep' one? If so I think I might have a midi of it somewhere...
Click to expand...
Click to collapse
Yep - that's the one.
Would be grateful if you have !
Cheers
Mark

Could easily make your own with e.g. Audacity...
Generate > Tone...
Waveform: Sine
Frequency: 1750Hz
Amplitude: 1.0
Length: 0.1s
End key
Generate > Silence...
Length: 0.1s
End Key
Generate > Tone...
( Next bit is if you use a repeating sound for text messages only. )
Generate > Silence...
Length: 0.5s
Hold shift and press the play button for repeat play
beep-beep .. beep-beep .. beep-beep
Obviously you can easily change the tone of the beeps, the pause between the two, the pause before playing again, and the volume, by just varying any of the above.
File > Export as WAV...
beepbeep.wav
Copy "beepbeep.wav" to your PocketPC's Windows folder.
You can now pick it as the tone for your incoming text messages.
One note of warning - these simple sine waves play back very well on the tiny speakers, so expect them to be quite *loud*.
Further notes: you can probably use lower sampling rates/bits, and even save as an mp3.
Result of the above steps is attached.

Mark, try this one. Took the original Nokia 'Message' tone and converted it to .wav. Then ran it through Audacity (thanks for the walkthrough, ZeBoxx, very useful) to up the volume a little and tweak the speed.
Sounds pretty good IMHO and is now my text message tone of choice. Hope it's what you were looking for too.
Cheers
PS I know it's too big but I don't have enough skill to reduce it, sorry. ZeBoxx??? :wink:

Alt SMS Tone
I use the attached intel ditty, seems a good one for SMS and no-one else uses it
Until now !!! but I know we users are a select bunch, so no worries
Hays

Here's the morse code type one, using Audacity.

These "classic" tones are great. Does anyone know of a site that might have more?
I'd be particularly interested in .imy tones from Motorola phones. They're kind of like midi files in that they only contain musical notes rather than digital sound.

Cheers Guys - mucho appreciated
These are just what I need - plain & simple (and also loud) tones.
Thanks
Mark

mosgeo said:
PS I know it's too big but I don't have enough skill to reduce it, sorry. ZeBoxx??? :wink:
Click to expand...
Click to collapse
Pretty easy
Click on the down arrow next to the Message2 track title
pick "Split Stereo Track"
close one of them ([X] button on the left of the track)
Click on the down arrow next to the Message2 track title again
Pick "Mono"
Size is cut in half now
Then select the bunch of silence at the end - WM5 doesn't repeat the SMS sound ('repeat' option is disabled), so there's no use in that pause being there..
..therefore, hit Del.
Now save again, and you should get pretty much the attached file.
Audacity is really great for this - you can easily add tremolo/echo/fades/etc. and get nice and clear, loud (due to the simple wave form), distinctive tones.
Of course it's not as 'hip' ( do they say that anymore ? ) as the latest $5 RealTone from Jamster!, but I say: screw that.

In Call Recording Activated in the Reg.

Hi, all. Last night I came across a couple of reg setting's that added an extra option when making a phone call.
Here is the main key HKEY_LOCAL_MACHINE\Software\HTC\PHONE\EnableICR
Change value from 0 to 1.
Also change to the following:
HKLM\Software\Microsoft\Voice]
"AllowInCallRecording"=dword:00000001
"EnableCallRecodMenuItem"=dword:00000001
Reboot phone.
Then make a Phone call then press right softkey (Menu) and Record appears as an option. Press it and the phone plays a sound (indicating beginning of recording) and phone returns to normal in call screen. When call is hung up or you press stop recording in the menu. Another sound plays. Go to notes under My Documents on Phone and there is a time and date stamped audio file.
I have not fully gone there with this yet as I'm at work (long weekend/ 8am sat till 6pm Mon) But will let you know of any progress as and if I get any.
Bye for now.
Phil
Note
Sorry for basic path error, I'm working right now and am just popping in from time to time. Sorry once again.

Diigibio,
I believe the other registry keys to be modified may be the following:
[HKLM\Drivers\BuiltIn\WaveDev]
"VocRecPath"=dword:00000002
[HKLM\Drivers\BuiltIn\RIL]
"RingingAdressId"=dword:00000000
[HKLM\System\AudioRecording]
"Enabled"=dword:00000001
[HKLM\Software\Microsoft\Voice]
"AllowInCallRecording"=dword:00000001
"EnableCallRecodMenuItem"=dword:00000001
Nonetheless, despite these modifications, it appears that the recording is not totally perfect with some software, such as Vito Audio Notes Touch (the voice of the callee is too low)
...

Thanks for posting this. Needs to get added to the hints and tips sticky.
The key is actually at HKEY_LOCAL_MACHINE\Software\HTC\PHONE\EnableICR on my HD2

Cheers,
tried it on a German stock 1.43 ROM, RECORD option does not appear in the menu even after soft reset.
And BTW, the correct path would be:
HKEY_LOCAL_MACHINE\Software\HTC\PHONE\EnableICR
Best regards
GZ

Graf,
Try this cab.:
http://forum.xda-developers.com/showthread.php?t=493118
It works on my HD2.

Also it only appears in the menu once a call had been started. This id built in to rom without external programlike vito or Resco recorders. When I'm able to get my laptop out, I'll post a screenie.

arturobandini said:
Graf,
Try this cab.:
http://forum.xda-developers.com/showthread.php?t=493118
It works on my HD2.
Click to expand...
Click to collapse
I installed "2_Way_Plus_InCall_Recording cab" and it still didn't work on mine. It only records the incoming voice. Should i have tried "2_Way_Recording" cab instead ?
I tried ACR, Resco, Vito. Always the same bug :\
I've got the official ROM.

Lucius Snow said:
I installed "2_Way_Plus_InCall_Recording cab" and it still didn't work on mine. It only records the incoming voice. Should i have tried "2_Way_Recording" cab instead ?
I tried ACR, Resco, Vito. Always the same bug :\
I've got the official ROM.
Click to expand...
Click to collapse
Did you also make the changes in the registry as mentioned above?
Normally during a phone call you can go into the menu and check 'recording'.

arturobandini said:
Did you also make the changes in the registry as mentioned above?
Normally during a phone call you can go into the menu and check 'recording'.
Click to expand...
Click to collapse
No i haven't, but i will. Can you confirm me i took the right CAB ? There are two.
Do these reg tweaks apply onlu for the built-in Windows Mobile recording option ? I'm looking for one which does the job automaticaly (not the case of this one apparently). So i wish to use Resco.

I remember this reg tweak back with the Blackstone. I tried it on the HD2 but the sound quality is very low and poor. Is there anything else that can be done to improve it? Once all is good I will add to hints and tips thread.

tboy2000 said:
I remember this reg tweak back with the Blackstone. I tried it on the HD2 but the sound quality is very low and poor. Is there anything else that can be done to improve it? Once all is good I will add to hints and tips thread.
Click to expand...
Click to collapse
tboy, thanks.
That would be very helpful.
The above registry tweaks do work, and phone conversations can be recorded. The only thing we shall improve is the low sound quality.
There must be a registry for the volume level too.

So. . .
I have done this tweak on my device,
with all the additional info and Reg Changes also.
The recording of my voice is crisp and clear, while the recording of the other person is very weak (low volume) and noisy.
I think I read on another thread that someone else encountered a similar problem.
So my question is - is there anything else I should do to improve the recording quality of the other person ?
Is there anyone else still having the same problem ?
Thanks.

I too have done the various reg edits and although it seems to work (there is a record option when making a call, a sound plays and a file is generated) the output file doesn't contain either outgoing or incoming sound!
I had to create the key "HKLM\Software\Microsoft\Voice" since it didn't exist, I wonder if this has any bearing on the matter?
I also initiated recording before I was connected to the other end, maybe that's my problem.
I will try only activating record once I'm connected and I will also give that cab a whirl, and report back

il be keeping an eye on this one,

Let us know if it works, and on both sides !
Cheers.

diigibio said:
Here is the main key HKEY_LOCAL_MACHINE\Software\HTC\PHONE\EnableICR
Change value from 0 to 1.
Also change to the following:
HKLM\Software\Microsoft\Voice]
"AllowInCallRecording"=dword:00000001
"EnableCallRecodMenuItem"=dword:00000001
Reboot phone.
Click to expand...
Click to collapse
I don't have folder Voice...only voice commander...?

Bence said:
I don't have folder Voice...only voice commander...?
Click to expand...
Click to collapse
So do I

H2D2 said:
I will try only activating record once I'm connected and I will also give that cab a whirl, and report back
Click to expand...
Click to collapse
Any news about that?

Steps I took
Hey all,
I though I'd give this a shot. I changed the Main key HKEY_LOCAL_MACHINE\Software\HTC\PHONE\EnableICR from 0 to 1.
However I didn't have the folder/key: HKLM\Software\Microsoft\Voice So I created it!
HKLM\Software\Microsoft\Voice
"AllowInCallRecording"=dword:00000001
"EnableCallRecodMenuItem"=dword:00000001
It all seems to work, the menu option appears and I get the sound when recording starts, however it's very quiet.
One way around this is to put the phone on load speak. Then the recording is clear.
Hope this helps.
S

Does it work if you only edit EnableICR 0 to 1 or do you have to create Voice folder and these 2 reg keys, for which we are not sure if are working because we dont alerady have them originally?

I'm tired of enduring the vsync disabled!

hi all,
Sorry for my bad english...
During scroll or when i play in game or when i watch a video, i have the "breaks" of crappy, this is very very irritating for me ! I don't understand why everyone ignores this.
The only thing I find on the web is this: forum.xda-developers.com/showthread.php?t=500499
After search in keys reg, i found this:
Code:
[HKEY_LOCAL_MACHINE\\Drivers\Display\Settings\ILCDC]
"VisibleDisplayHeight"=dword:000001E0
"VisibleDisplayWidth"=dword:00000320
"DataEnInvertSignal"=dword:00000000
"VsyncInvertSignal"=dword:00000000
"HsyncInvertSignal"=dword:00000000
"VsyncFrontPorchLns"=dword:0000001B
"VsyncBackPorchLns"=dword:00000014
"VsyncPulseWidthLns"=dword:00000002
"HsyncSkewDclk"=dword:00000000
"HsyncFrontPorchDclk"=dword:00000051
"HsyncBackPorchDclk"=dword:00000051
"HsyncPulseWidthDclk"=dword:0000003C
"ID"="4.3in WVGA Optrex"
[HKEY_LOCAL_MACHINE\\Drivers\Display\Settings\ILCDCgordon]
"VisibleDisplayHeight"=dword:00000280
"VisibleDisplayWidth"=dword:000001E0
"DataEnInvertSignal"=dword:00000000
"VsyncInvertSignal"=dword:00000000
"HsyncInvertSignal"=dword:00000000
"VsyncFrontPorchLns"=dword:00000002
"VsyncBackPorchLns"=dword:00000002
"VsyncPulseWidthLns"=dword:00000002
"HsyncSkewDclk"=dword:00000000
"HsyncFrontPorchDclk"=dword:00000021
"HsyncBackPorchDclk"=dword:00000090
"HsyncPulseWidthDclk"=dword:0000003C
"ID"="VGA Sharp Gordon"
You know exactely where i can activate the vsync ?
Thx

Well, no answers ...
Yet you are all concerned! This didn't embarrasses you not?
To illustrate the problem, see:
- en.wikipedia.org/wiki/Screen_tearing
- youtube.com/watch?v=O8_fbUfVRZg
- youtube.com/watch?v=L0ZhDGTVm4M

lo said:
Well, no answers ...
Yet you are all concerned! This didn't embarrasses you not?
To illustrate the problem, see:
- en.wikipedia.org/wiki/Screen_tearing
- youtube.com/watch?v=O8_fbUfVRZg
- youtube.com/watch?v=L0ZhDGTVm4M
Click to expand...
Click to collapse
I saw this too,but it happens only when I slide open the phone in some apps.

I have same problem in my x2,and can't find any way to solve it ,I search vsync in registry,change 0 to 1,but it also ''screen tearing''
ps,x1 seem not has this problem...
What can we do to solve this?
Sorry to my bad english.

Warning: I have placed only the non-HTC tweaks here and HAVE NOT TESTED THEM YET. Any changes you apply or programs you use will be at your own risk!
I would have tested this already if I could but I will only be able to after a few days when I get my new X2 (again). I just wanted to give possible solutions besides turning on Vsync.
-------------------------------------------------------------------------------
Activating VSync only will not solve your problem because screen tearing is usually caused by a combination of bad video and file access configuration.
To answer your request here is what I found for the VSync registry location (please confirm this):
[HKEY_LOCAL_MACHINE\Drivers\Display\LCDC]
"Vsync"=dword:1
And here is a list of possible tweaks for the X2:
Original post by g.lewarne is: forum.xda-developers.com/showthread.php?t=629388.
Change:
HKLM/System/GDI/GLYPHCACHE To: 524288 (change both keys in there)
This allows for much smoother font rendering, especially when scrolling
Change:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize To: 131072
This creates a filesystem 128k sector cache filter, improves data throughput from ROM to RAM (probably) and does seem to improve indexing response and file browsing.
EDIT: file explorer just loaded my “Windows” directory in half a second with this enabled , and the screen does not tear when scrolling the list either any more
Change:
HKLM/Drivers/Display/VMMaxHeapSize To: 33554432
This changes the VideoMemory max heap from 16k to 32k
Change:
HKLM/Drivers/Display/Settings/SMI2 AllocSizeMB To: 32
Change:
HKLM/System/GDI/Drivers/Bpp To: 24
Now this IS interesting. I dont know if its just me, but were HTC holding out on us display wise? Changing the BitsPerPixel (colourdepth) from 16 to 24bit, for some reason, whether the display is actually capable of true colour or not, not only MAKES THE SCREEN LOOK BETTER but its also FASTER
Click to expand...
Click to collapse
Finally a tool for boosting graphics:
forum.xda-developers.com/showthread.php?t=509704

Can somebody test the above a provide a feedback thru all the points Xareth suggested us?
I'm not able to do this my X2 is not available for a a month or so.

Who is coming up with these crappy settings? Most of them are NONEXISTENT in my X2!!! And many of the rest are already much higher!
This is not a HTC phone and has no such hardware and NOT most of those HTC specific windows registry settings a HTC phone has.
Please post only registry settings and changes of such, which are existing in the X2.
Thank you!

I agree.
I think all that Xareth says, comes from the HD2... But I tried to add the non-existent keys => nothing !
And i have already tried GfxBoost, NeoS2007 and SpeedBooster, this hasn't solved the problem.
I think that without hardspl, nobody knows anything do

What happens when you try to help and warn in CAPITALS that you have not tested it.
Thank you all for your replies to my post above.
First of all, really sorry to have disappeared but I have entered a new job and have been busy as heck to reach a stable setup.
Even though the testing of the reg keys failed, I am happy that it at least has gotten us closer to finding a solution since we found out they did not work
What next? Well, what else! Gotta try to find other ways. This time I can test since I have my X2 and am using it regularly.
@lo: don't give up, don't assume it's the end! I am now checking if it has to do with the SD card access (delayed reading).
@michaelthemage: I know you are frustrated and want a working answer at once, but:
1. this is a community forum not a support centre so don't assume I or anyone else is making up any crappy settings. We're just trying to find the right answers.
2. and yes, I can make mistakes just like you or anyone else. For example you did not read my first line saying I did not test the settings since I did not have a device to test with! Demanding much?
3. I don't think we can limit things to X2 only registry settings because first of all, it's not out there in the open to know which settings are only for X2! I removed the obvious HTC reg keys and went on from there. I think that is the next best thing to finding an answer, instead of hitting a dead end. I ask you to also try to find an answer or at least post something more constructive.
4. Sony previously worked with HTC (HTC was making the components for previous Sony devices) and therefore it is logical there may be some HTC keys which are applicable. I will tell you right now many fixes that work for HTC work for the X2! Have you ever wondered why? Of course I may be wrong too but I'm trying to find out if I am!
5. Let's go on to hardware. Many smartphone manufacturers are only integrators. Even HTC buys its parts from another company in China. So don't tell me it does not have similar hardware to HTC until you have opened both companys' phones and confirmed (which I have btw, the opening not the confirming). It's like saying LG Laptops do not have LCD screens like Samsung Laptops when Samsung manufactures the LCDs for LG.

Get a life!
Dude, I don't have the time nor inclination to answer this crap in several paragraphs. Still these reg settings are crap and somebody posting this crap is responsible if any noob applies them and screws up their phones. That is the crap! That's it!