Database Users

Qtek 2020 , Socketcom GPS Bluetooth issue

I install wireless GPS Bluetooth from Socketcom but after when I run tha "MyNavigator" program I receive a windows with
Warning
Sound files are missing or corrupted.
Please reinstall from CD-ROM
and the program doesnt works.
Could you help me?
thanks

i lose the connection via usb

dear all
i can not run activesincron in the pc with my xda2 true the usb cradel
but the bluetouth work fine also the cradel work
he charge the device
please have you any suggestion ???
the device is too slow the are any suggestion ???
i have qtek 2020 with
Rom 1.66.02 FR
Date of rom 02/23/04
radio ver 1.10.00
protocol 1337.18
ExtRom 1.66.211

make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed

Biso007 said:
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Click to expand...
Click to collapse
hi biso007
thank's for your replay
yes i do it but noting
the strange that i can by connected true bluetooth
i dont like to make a hard reset .... :evil:

have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?

Rudegar said:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Click to expand...
Click to collapse
hi rudegar
thank's for your replay
yes
this config is standart and i dont change it
the device work before its only today i dont know whats hapend
also i remove all soft that i install today
checknotifications
clearnotify
phoneled_on-off
Pocket_Hack_Master
i remove all this and i make a soft reset many time
but nothing
also the are no conflict into the usb device and the cradel is know well by the pc
i suggest if there are no pin connection broken (but i see well no pin broken ) it's a software configuration
but how .....
sacaman

and activesync is set to use usb also ?

I had exactly the same problem about a month ago and after trying everything under the sun and nothing working i eventually ended up doing a hard reset,
It fixed it instantly so i restored all my data from a backup and it stopped working straight after the restore,
i hard reset once again and it synced ok, so i then had to reinstall all my programs individually rather than restoring the backup, it was very annoying but i dont think theres any other way around it

hi all
thank's for your response
it 's ok now but after making hard reset :evil:
i mst install software one by one to know who create this problem
and i keep you informed
by after all backup :evil: :evil:

Battery Pack 2 , on Jam?

I have loaded this program on my JAM, and it keeps resetting, can not use the device at all!
I DIDN'T HAVE ANY PROBLEMS WITH VERSION 1.11
Has anyone experienced the same problem? Any solution?
Thank you

It works fine on my blueangel.
You may try to hardreset your machine and install it again.

I have updated the rom and installed right after, reset and so on and still didn't work.
I have repeted this about 4 times with different ROM's
A.

Its working fine on my Qtek S100 with 1.11.00.WWE; its just a pig and insists on being installed in main memory - everytime I try to move anyof the DLLs to Storage, I have to do a hard reset..

Hi!
I am also using BatteryPackPro v.2. The problem I am facing is that sometimes when I am connected to my computer thru BT, the program memory on my Jam keeps decreasing. It keeps going down and when I disconnect it just stays at the same point till the time I do a soft reset.
Any suggestions?

there is an update 2.0.3
the update fixed the mapping of botton

HELP!! Bluetooth problem

Hello Guys,
I'm a new member of this forum and a newbie for PDA Phone device
I have this one problem with my bluetooth.
T'm using Dopod 838pro ROM 1.23.707.4
I cannot transfer any file (send and received) file from any other phone or PDA although it can be detected by other device an also can detect any other device so i'm sure that the bluetooth is on.
When I paired it with my PC the only service detected is only dial up networking
I'm desperate....
Any suggestion????
Pls help.......

check if auto recieve beam is enabled in connections
and use reso explore to sendt files

thanks a lot for the reply will try that ASAP.

It is a known problem. Until a new ROM is available you will not be able to fix it. I am going to FAX hermes tomorrow

Bluetooth not receiving files

Hi,
I have X1 from Vodafone UK. I don't know if this problem is happend on all xperia but mine is not receiving any files from other nokia or pc.
Yes, I do the thing with beam - [x]Receive all incoming beams but when I try to send a file to X1 I receive the error: transfert failed or service not active
I can send the files with no problem to pc or other phones.
Soft Id 1213-2276
Soft vers R1AA020
Customization 1215-0285
Cust vers R15A VFE_UK
ROM vers 1.02.161.7 09/17/08
Radio 1.06.25.29
Protocol 54.43.25.24W
ExtPkg Ver 1.024835.11188
Any ideea?
Thanks

In the Bluetooth settings, under Security do you have Authenication (Passkey) required ticked?
Try unticking it, or making sure that you pair up the two devices with passkeys (0000 or aaaa will be fine).
Also keep an eye out for any prompts on either device that might need a quick response to.

Yes I used with passkey and without. the phone is not receivinf any file!

gp to settings, connections and pick "filetransfer".
just a checkbox there where u have to activate it.

there is no "filetransfer" in settings connections

Problem solved! I installed hc4_inbox.cab. This is obex DLL from HTC.
Install - reboot - settings - connections and a new icon there -obex inbox. VERY NICE!
Is working without any problem. NOW I can receive in 1ms any files.

strange. got a vodafone DE branded one and i could activate this function.

achmed20 said:
strange. got a vodafone DE branded one and i could activate this function.
Click to expand...
Click to collapse
Which function? Do you have Filetransfer in settings-connections? Can you post a screen of this?

Thanks for this. I've also been unable to transfer files over BT. Installing above cab solved it...
EDIT - after a soft reset this no longer works. How to solve this?