Related
hey guys, just wondering if this is a known bug on universals or just several roms or if i have a dodgy universal or sd card in general:
It seems when i bring the device out of standby mode after a long period of inactivity, i enter my password and the device just freezes, locks up - Dead.
When I take the storage card out and repeat, the device is fine which lead me to believe the card was duffly formatted, so i stuck it in my card reader and formatted it into FAT32 and then put all my data back on... same problem!
So i then flashed my device from the QTEK rom to the o2 rom in corp mode to see if i still had the issue... was fine for a short while then earlier today i turned it back out of standby and same problem!
So i've narrowed it not to be the storage cards fault, since the card works fine in my xda 2s, and card reader and it seems to either be a subsequent issue in the o2 and qtek roms, or maybe ive got a duff universal with dodgy card slot?
Is this lockup issue a known bug?
Sometimes when i get lucky the device doesnt lock up but instead the card disappears from the system view, and only removing the battery and then rebooting solves it.
If anyone can shed any light i'd appreciate it!
had similar problem
On my compact and PRO (univsersal) I had 1 1gb SD card that always gave a message improperly removed when the device came out of standby.
Used the card that came with my PRO , a 512mb SANDISK no problem.
Put the 1gb in my panasonic camera its fine. the 16MB that came with my camera but branded panasonic works fine in my PRO, left the 512 in my compact for as MP3 with bluetooth headphones.
I think the compact had less problems after a recent T-mobile ROM update.
I think the Compact and PRO are both fussy what cards they use. My 1gb SD card is a generiic 66x. Also I think that there are some bugs to be ironed out with power management.
BTW should it be flashed in FAT or FAT32, some devices can only read FAT I believe.
If you use standby/suspend and you have media files (music/books/etc) on the SD card and the app in main memory you'll have problems when you re-start. I get this problem with MS Reader and eBooks all the time. Looks like another bug in WM5 to me.
jah said:
If you use standby/suspend and you have media files (music/books/etc) on the SD card and the app in main memory you'll have problems when you re-start. I get this problem with MS Reader and eBooks all the time. Looks like another bug in WM5 to me.
Click to expand...
Click to collapse
Funny, I have all of my apps on the Main Memory, and my .prc's, .avi's, and .ogg's on the storage card, and I've never had this problem?
(I'm using a 1 Gig Jessops card that originally came with my camera, no idea what it "really" is though)
@sun69,
the problem only occurs if you use powersave/suspend and you leave a media file open, eg when reading an ebook.
this also happens when you have a 2577 folder on the sd card and do not have a start.exe in it. It will let the device hang.
Ive found the problem to be with the SD card itself, if i use the 128mb Sandisk from my Xda II s it's fine,but within ten minutes of sticking the 512 Lexitar card in, the whole device is ten feet under...
Looks like ill need another
MurphmanL
I reformatted my 2GB SD card and one problem I had with WM5 reporting a shortage or RAM went away. Not really sure why the Exec seems to be so sensitive about SD cards.
Actually this reminds me... I used a 1GB KINGMAX SD card in my XDA II Mini and it hangs randomly... Now I'm using a 1GB Sandisk SD Plus USB in my XDA Exec and it hangs randomly too...
I am reverting back to me Panasonic 128mb SD card to see if that helps... Although it's weird that on my Xda Exec it only SOMETIMES hangs when I receive an SMS... don't know whether this is two issues or one.
I have a 4GB Transcend SD Card. I can install and run any application on it but, the camera application can't seem to read or store any pictures on it. It states: "not enough memory"
I tried reformatting it using Pocket Mechanic on my Exec and still the same result. I tried reformatting it on my computer but it can't read the 4GB SD card from Transcend.
funny I have a 1Gb Sandisk card and even if I have no media files open sometimes it just hangs on resume. The only way to get around this problem is to leave the XDA switched on all the time and swithc only the backlight.
However, this way the battery life is shorter. I think this problem should be addressed to someone who is technical (not like me) maybe we get a plausable explanation of what shall we do.
It is very annoying since when the system hangs up the mobile does not have any coverage and in sales it means loosing potential customers!!!!
XDA EXEC
Same problem Here.
I had a 1 Gig card and I often had to take it out to solve the problem.
Now I have a 2 Gig card (Sandisk Ultra II) and the problem is solved.
I'm not that technical, but wasn't there an issue with dual voltage sd card's?
I too have a memory card problem. I have loaded some pictures and videos on the card but as soon as I try to open them in File Explorer the XD Exec freezes and will only work again if I remove the memory card or reset the Exec. Then it freezes again when I try and read the memory card again. I've tried loading stuff on using Active Sync and using a memory card reader and still the same. I've even formatted the card again. It is a cheap SD memory card will I need a new memory card or is it a software problem?
@jah, my wife has this same problem on her Wizard (vario), she got a 128Mb miniSD with her Vario. If she leaves the card in and allows the device to suspend then wakes it up she gets a white blank screen and has to soft reset to recover. With the card removed the problem goes away. She had her vario replaced because of this fault (tech support thought it was the vario at fault). It was only when the problem occured with the new vario that I had a play and found with the card removed the fault went away. We haven't taken the card back yet, but I am 99% sure it is a card fault.
I might try her card with the adaptor in my Exec and see if I get the same problems as you are getting?
Regards, Simon
It seems like Dopod900/Univeral is sharing the same problem, too sensitive toward particular SD brand/model. My Dopod900 also having a huge problem recognizing the Kingston 2G SD 133x but works fine with Transcent 2G SD 150x.
Help! Storage Card suddenly not showing - dead?
Has anyone had problems with the Storage Card completely dying? I cannot read my 1GB miniSD card on my Wizard device at all any more. It started being weird yesterday but after a reset I was able to access the data, but today it is totally gone.
A 16MB one works fine. :? These cards don't generally die that easily do they?
Could this be a driver issue or something else so I can get my data back? I have tried many resets both with and without the card in place.
I've the same problem (I guess) with my card. I'm not able to read my card on the vario. When i inserted my SD card in a PC he cant read the card. When i start my PC with the card insered system hangs on loading windows.
When I restart my phone with the SD card inserted WIFI wont go on, do you have th same problem CJSnet ?
This looks like the SD disk is something like an (unreadable?) bootdisk ?
I had the same problem with a SanDisk 1GB card recently. I sent it back to the supplier and they replaced it.
Before my "Mini S" I had a "2i" and it was well known that it would "eat" cards. On that forum they compiled a list of "never eaten" cards and recommended staying away from anything not on the list.
I suspect the Wizard may have a similar problem.
i've also got a problem with my miniSD, sometimes it doesn't recognise the card. But when i remove it and re-insert a few times it does work again.
A common problem with the SD-cards is that their contacts are dirty, cleaning sometimes helps.
Thanks mmm_ok, can you provide a link to that list of 'never eaten' :lol: cards please?
Mine is an unbranded type from Viking, so that could be the reason.
zawoot, I had no problems with WiFi and the card inserted.
Have now solved it. When I loaded the card on a PC and ran chkdsk, some of the files were corrupt (plus the boot partition I expect). I copied the salvagable files to the PC, formatted the miniSD which took about an hour (!), and now the PPC can read it again. Now I just copy back the files from the PC, and the lost ones from a recent backup.
What a pain in the backside. HTC not fixing the 'eating cards' bug has cost me 3 hours of my life. What price technology!
SD card problem
I'm facing the same problem. The last thing I tried was format the SD Card
using Pocket Mechanic "Logical Format" - "do not use quick format", format it
two times and just that. Also, as a test, I'm not using the full SD Card
capacity, my SD has 1 G and at this time I'm using 700M and since 10 days ago
everythiong is fine. As an additional test I leaved the battery goes to a
very low level and reseted the device to see it it corrupt the data .. but
is still ok.
My 2GB Adata myflash card has done this. I'm so mad, it has to go all the way back to china for repair.
This is really wierd behaviour for a phone. HTC in all its shoddy glory.
CJSnet said:
Have now solved it. When I loaded the card on a PC and ran chkdsk, some of the files were corrupt (plus the boot partition I expect). I copied the salvagable files to the PC, formatted the miniSD which took about an hour (!), and now the PPC can read it again. Now I just copy back the files from the PC, and the lost ones from a recent backup.
Click to expand...
Click to collapse
SO is there any other issues after you did the format?
I have an ATP 1Gb MiniSD and sometimes my MDA just said that it can't execute an application (that's installed to the miniSD card) because it was "usigned". When I run Resco Explorer, I noticed that the card is NO LONGER shown (???). So I took out the card, re-inserted it and it's now shown in Resco Explorer as "Storage Card2" ! So of course none of the program works since the links (in registry especially), pointed to "Storage Card", not the one that ends with 2. So my solution (for now) is to just shutdown the device, wait for a few minutes, then turn it on again.
I have had 2 cards from mobymemory 1gb and now 2gb - not one problem run well. Can highly recommend mobymemory the use single density cards or something that many of the other manufactures don't use. my advice stay away from cheap cards.
I used a backup utility my card died, and windows could not open it, I reformatted on my digital cam and it works again. It's the software loaded on it.
My MiniSD card popped out of its slot spontaneously last night. Ever since my Qtek 9100 would not recognise it any longer. It still worked on my card-reader attached to my PC. In the end I decided to format the card (not quick format) and now my Wizard recognises the storage card again. Losing all my downloaded attachments during the process. FYI It is a SanDisk 1GB MiniSD card.
sandisk 1g card is almost 2-yrs old and was first for typhoon and now serves faraday and wizard and just started acting wierd on wizard. every so often device does not read card upon waking. pulling it out and reinserting fixes it but i've moved programs to device. poo!!!
Storage Card seemed dead
I had a simuliar problem with my original qtek 1.6 rom until I upgraded to the latest imate 2.17.
Having worked 5-10 minutes with wi-fi, the storage card became invisible and unaccessible. To make it visible once again it was necessary to soft reset the device.
This and some other problems disappeared once I upgraded to 2.17.
Hope this help
Hi everyone,
The SD Slot in my T-mobile MDA compact suddenly stopped working.
Not sure why, but I have 2 suspicions, either I had some sand in the pocket and it got into the slot or it was the Motorola miniUSB charcher that i tried, didn't work and damaged the slot.
Did any of you have dealt the same issue or any suggestions to me ?
Thanks alot guys!
(p.s. - Great Forum!!)
Hello,
There may be many ways for the error. First lets test if the slot recognizes the memory card insertion atleast. Turn-off or put your device to suspend mode and insert or remove the SD card from the slot. If the contacts are intact, the device should light up and turn on. Does that happen..?
When I insert or remove the card nothing happens, It doens't
respond.
Any other testings I should do ?
Guys, I become more despaired as time goes by.. :? :?
Most of the privileges of the Jam are gone without the SD, No GPS no Movies, no music, no games.....
PLEASE PLEASE....help.
Hi all,
I just got recently a 2gb microSD from Sandisk and conected in my X01HT(HTC TyTN), it doesn´t reconize the card and the card get very, very hot
anyone could help me with that?
Thanks
Assuming there's nothing wrong with the card, you might have put the card in wrong, or the card might not be aligned properly when placed into the slot. Try these:
1) make sure the contacts side is facing up when you put in the card (slot facing you, pda screen facing up)
2) as you insert the card (slowly), try to align it more to the bottom left of the slot. If it's inserted correctly, you should feel some springing pushing the card out as you insert it.
3) If the card is inserted correctly, it should bounce back out if you push it in a little.
hopefully that helps, but if all else fails, take the card back to the store.
Hi,
Has anyone had this issue? When I have my Toshiba Mini SD card inserted in the phone, my phone will randomly power on when I don't want it too, like late at night, or in my pocket. After some troubleshooting, I have narrowed it down to the SD card because when I touch the card the phone turns on, and if the card isn't inserted, I don't have problems. Basically, it is as if the card is getting inserted while it's in my pocket or sitting on my night stand. I think an easy fix is to make Windows Mobile not turn the device on when a card is inserted.
Does anyone know of a registry tweak to disable power on when an SD card is inserted? Or a setting hiding somewhere in all the configuration options? It is getting very annoying, I have resorted to just leaving the SD card out now, and it's 4 GB of storage I'm loosing out on!
Any assistance would be appreciated
-Mark