Related
How can I remove from the original ROM some files like T-Mobile, AIM ... etc. ?
I cooked up a 4.00.10 T-Mobile with GPRS monitor and batterypack but i want some more addons.
Can someone tell me what steps are required to remove from the ROM some files ?
Thanks,
Decebal
ROM = Read Only Memory.
But, i've we're able to add Programs to the ROM in the ROMkitchen, i think we're also able to remove programs.
Regards
Stefan
cruisin-thru said:
ROM = Read Only Memory.
Click to expand...
Click to collapse
obviously i do not deserve that
i was talking about the ROM image and since i've already succeded in putting into the ROM two apps i want to try something else.
so if anyone know how to remove at least T-mobile and AIM files from the image i'll be happy.
thanks,
Decebal
I believe they are in an area not able to be modified.
I was just quoting from that site, it does state that it cannot be erased, modified etc, no offence meant here. :roll:
The mkrom tools will allow you to 'unpack' a rom, i.e. extract all the files that are in it.
A rom, to the best of my understanding, has a 'native' or stock part to it, and then a series of XIP chains -- programs that are added into the free spaces of the rom.
I dont know what happens if you try to remove files from a rom that are part of the standard build...
Maybe the TMobile stuff is in a 'removeable' section of the ROM... there is also the 'operator' section... I am assuming that is a location that will give the 'operator' or creator of the rom space to put specialized programs, such as TMobiles phone apps, etc.
So, it seems that your best bet is to get the mkrom tools and read about how to extract/remove files/rebuild a rom.
Hey, it may even work!
J
You can rebuild a rom image from extracted files and leave some files out but Mkrom does not use compression and therefore the rom you end up with will probably be bigger than the rom you started with.
Richard
If I am correct, an eeprom is something else than a flash-rom.
so the article at least states it incorrectly.
if it is flash, you should be able to modify it.
XDA developer Itsme said:
If I am correct, an eeprom is something else than a flash-rom.
so the article at least states it incorrectly.
if it is flash, you should be able to modify it.
Click to expand...
Click to collapse
Now, I do think that the real question is "How do we unlock the 'ROM' so that it can be modified being that it is an eeprom?"
Misterdollymaker
you need backup the ROM to *.nb1 or *.nbf file, than using tools to add/delete file to *.nb1 , write the new file back to XDA ROM. it is fun to add/delete file to your personized ROM!
cgigate said:
you need backup the ROM to *.nb1 or *.nbf file, than using tools to add/delete file to *.nb1 , write the new file back to XDA ROM. it is fun to add/delete file to your personized ROM!
Click to expand...
Click to collapse
this is quite interesting...can you elaborate further?? I wish to learn more...
cgigate said:
you need backup the ROM to *.nb1 or *.nbf file, than using tools to add/delete file to *.nb1 , write the new file back to XDA ROM. it is fun to add/delete file to your personized ROM!
Click to expand...
Click to collapse
Yes, please! I wish to learn more too! I am looking to remove the standard sounds and replace them with my own (using same names) as well as the boot image and desktop.
yea, no kiddin, i'd like to know how too!
im sure its not impossible, 'they' did it the first time arround.
why not hacking it? and since its all at no charge (no profit) are we realy breaking any patents?
I wanted to know if there is an easy :wink: way around, to put our own programs in the rom. xda-developers certainly can't put ezwap2.5, and the total commander appears to be older version, while new version is much better. There are some more freeware application I'd love to put in there
xda-developers already posted some tools to do job, such as MKROM ...
cgigate said:
you need backup the ROM to *.nb1 or *.nbf file, than using tools to add/delete file to *.nb1 , write the new file back to XDA ROM. it is fun to add/delete file to your personized ROM!
Click to expand...
Click to collapse
I'm interested too
How can i add/delete file from nb1 file?
Thanks
Fabio
I've used mkrom suite to do this (even for Smartphone2002). This are great tools.
Unfortunately it's not as easy as you might think. It's nearly impossible to build a ZERO-KNOWLEDGE ROM file explorer which can add or delete files "on the fly".
You will still have to look for valid gap's in the original rom where you can add a new XIP block.
All .exe and .dll files are "fixed up" that means they MUST run at THE fixed ROM position where they have been initially placed (execute in place). If you dump an exe or dll file you can't use it for other than disassembly to see how things work.
Removing files is a very hard task (they are splitted over the whole rom). And the resulting gap's are mostly not more than 10-16 kB. All you can do is to "hide" files (simply patch the directory entry).
So you see compression is not the real problem (see programers corner for a .bib file which can be used with romimage.exe - a Microsoft Tool to build XIP blocks, this tool supports compression)
John Smith
only the kernel actually runs in the virtual memory area mapped to rom,
all the other XIP stuff runs from a virtual memory area mapped somewhere
in the top of each processes memory space.
( look at the 'real=' values in the output of dumprom )
so for all the other modules it should be possible to move them around
in rom a bit, I think you only need to keep the pagealignment the same.
Hi,
The virtual memory address is also fixed in the module. (That's why I've to rebuild all the stuff I want to copy from other roms).
Since all relocation info is gone the module can't run from another memory position. So the only thing you can do is to move it in it's own XIP section...
John
Wazzzzzzzzaaa???
This is my first C# util!
It facilitates ExtRom update process. All you need to do is to put your cab files to Ext and run this utility, then the utility will create Config.txt at Ext with all cabs specified as "CAB: path2cab". If you need to get your original Config, then check ConfigOld at Ext
C# Programmers let's unite!!! ))
ps: the utility is not verbose one, so you won't see any messages & lame stuff. If you see something, then there is a problem
that's good boy! will try it l8r..
THANKS!
Man, wher z feedback?? Did u try it?
Yo,
boobee said:
that's good boy! will try it l8r..
THANKS!
Click to expand...
Click to collapse
Boy, hope you finaally tried it! And try this one also. This is my 2nd C# util
Shortly what it does:
UnZips your files with consecutive registry values (reg V4) import and splash writing
It means that you can zip all your files to one file called Setup.zip and place it anywhere (storage/ext). After hard reset, the utility is called and it extracts all your files and restores your favorite registry settings (saved to Setup.reg) and writes your splash.
btw: read za manual !
ps: the concept is the same, if u see somethin' then there is a trouble
Re: Man, wher z feedback?? Did u try it?
Attention!
The file was re-uploaded, so there mustn't be any CRC errors now
System Requirements
Regarding system requirements, the program needs old version of ER\Autorun.exe that understands ER\Config.txt
Program was not tested on XDA1! It was partially tested (w/o hard-resets on XDA2 / 1.72TM
Version 1.1
Wazzza!
Here is a new version of Restorator utility. The new features are:
+ now it deletes content of \My Documents;\Windows\Start Menu;\Windows\Startup folders (as people wanted
+ TimeZone offset is not resetted anymore
Note:
Make sure you have prepared your customized Start Menu (!!!) and Startup (!!!) folders, otherwise you won't be able to see Programs after hard-resetting your device. Please, check the attached sample to prevent yourself from having problems with this utility or use version 1.0 that don't delete anything
Umm... could anyone translate this into English for me?
I don't even understand the title of the thread.
In another thread, SP says that one of these downloads will retrieve data back on hard resets. Sounds like a useful tool, if only I understood what the hell these posts mean. :lol:
For Ben
sublimatica said:
Umm... could anyone translate this into English for me?
Click to expand...
Click to collapse
Here we go...
(assuming that you downloaded 'RestoreItV1_1_PPC.ARMV4.CAB' & installed it to your device)
This program is designed to restore your files, folders and registry settings from a ZIP-format archive and it can also write some splash screens
For this purpose, you need to make a ZIP-format archive with files & folders you want to get restored after hard-reset. Just run your favorite pocket zip archiver (for instance PocketRAR) and archive those files & folders that you want to see after hard-resetting device. Name your archive "Setup.zip" and place it to one of the following places: storage, storage card or extended rom.
Before doing further instruction make sure you have unlocked your ExtendedROM using ExtUnlocker.
If your rom is unlocked try to run the utility from \Storage\RestoreIt. If you had no messages after running it, then the utility installed itself successively. And your files & folders placed to 'Setup.zip' will be restored on next hard-resets.
If you're interested in restoring registry settings, then you need to get pocket registry editors that support exporting/saving to .reg files. After saving your favorite registry settings you will need to combine them to one .reg file and name it 'Setup.reg'. Then, you will need to place it to your archive's root folder (aka '\') So, you will have a file 'Setup.reg' placed to the root folder of your 'Setup.zip'. That's all folks
I strongly recommend you to see sample 'setup.zip' & 'manual.txt'
DON'T FORGET TO PUT YOUR CURRENT '\WINDOWS\STARTUP' & '\WINDOWS\START MENU' FOLDERS TO YOUR SETUP.ZIP!!!
You're welcome to ask me questions anytime!
Aaah, OK. That makes more sense
Sounds like a handy little tool then. Might have a play later.
Thanks, SP!
RAR-support
Is there anyone who is interested in rar-support for restorator?
Attention: Restorator v1.0 & 1.1
Attention: Restorator v1.0 & 1.1 are originally supported by I-Mate 1.72! All you need to do here is to use Extended ROM unlocker prior to running the utility
Feedback
Any feedback so far?
SP,
Restorator seems like a winner!!! I have been hitting my head on the rocks for a while trying to script a recovery using nscriptm as a scripting tool to call cab files which I keep on a storage card. Looks like using your tool a lot of the tedious scripting can be simplified by simply copying the files where they need to go. The challenge is knowing exactly what to copy & where... Is it possible to add the ability to call CAB files to your already excellent utility?
I am imagining putting all the CAB files in say a folder like \CABs in the Setup.zip and then having Restorator calling them one by one after finishing off with all else that it does. Can this be done? Additionally can you add ability to call registry imports at two points? You may wish to call registry import at the beginning and once more at the end after all cab file execution has been completed. This would be useful to restore application settings etc which the cab execution would overwrite to default. You would obviously need to keep two .reg files in the zip file. Does this make sense?
Thanks once again for all your efforts. Regards
Hi Mate
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
SP, thanks for continuing to work on this utility. I am waiting eagerly for your next update. I will set it up and test it with a hard reset so we can see real outcome. Let me know when ready please. Thanks
Re: Hi Mate
SP said:
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
Click to expand...
Click to collapse
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Re: Hi Mate
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Click to expand...
Click to collapse
Unfortunately I don't have an XDA 1 device at my disposal and I'm unfamiliar with its tech info.
What happens when your xda1 is hard resetted? Does it install cab files? or does it run any configuration software?
If there is a such software (on XDA2 it is autorun.exe placed at ExtendedROM), then you must specify in the runner (which starts on hard-resets) the call to the restorator utility
Looking forward to assist you in porting restorator for XDA1 devices
Cheers
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Restorator V1.2
k_kirk said:
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Click to expand...
Click to collapse
Sorry for the delay...
I'm having lack of time now, thus I couldn't test it very well . Just let me know if you found some bugs...
Now you can create "\CABS" folder and place your cabs there. They will be processed after extraction and before registry import. So, you don't need to have two .reg files then.
I'm looking forward to your new ideas!
ps: another attachment is a set of registry settings splitted by .reg files. I'm using them to get my setup.reg. Just change what you need, delete some of them and run "make.bat". It will create setup.reg with all your settings.
btw, check out "Usher_-_Yeah_[44k].wma" & "Maroon5_-_This_Love_[64k].wma". Home-made ringtones ;-)))
for those who hadn't used Restorator before. !!! DON'T FORGET TO PUT YOUR "START MENU" & "STARTUP" FOLDERS TO THE SETUP.ZIP !!! AND READ DA MANUAL!!!
Cheers
SP,
I tried the Restore-It utility today and found that the earlier functionality of copying files & importing registry etc from setup.zip works quite well.
The \CABS folder was also restored onto my device so I guess thats an indication that my setup.zip file was contructed properly. I am sad to report that none of my cab files were triggered by Restore-It though. I think there is a small bug thats holding back this behaviour.
Your kind assistance to check & correct this will be most appreciated.
Thanks & Best Regards
How to install the .xml files bundled in the cabs.rar?? I do not know how to make the extrom run automatically after the HR so i have to install each cab file 1 by 1, can anyone help??
Use the ones in cabs2. Also make sure you know what are those .xml for (they are replaced with .cab (s) in cabs2)
xml files are a typicaly a formatted text file like html
not really binary exe programs files
some programs use xml files to store settings and data
maybe they need to be in a location the program in question
will look for them
Rudegar said:
xml files are a typicaly a formatted text file like html
not really binary exe programs files
some programs use xml files to store settings and data
maybe they need to be in a location the program in question
will look for them
Click to expand...
Click to collapse
Did you mean copy the .xml files to the location of the program file ??
use HTCustom1.7.cab
yup...
I am having the same issue. I keep seeing these .xml files. I am not a computer guru lol. Do I cut and paste it somewhere on my phone or what? I am so lost please help.
Same thing here on my side mixtape_butcha. I'm subscibed in an Universal forum and have to install a USB switch which is a folder containing an xml file. I asked many time a guide on how to use it but nothing came back.
If you happen to know how to handle it, let me know. I'l do the same with you.
bests
Michael
first of all it is nice that you looked up a matching post yourself and obviously searched for a solution there, but...
if i get your problem right, it doesn't match the ones before. they were talking about .xml files that came with a cab file and stored the settings on how to install and execute.
you, however, talk about a subscribtion to a thread, meaning your xml file is an RSS feed, for which you need a special reader, since PIE is not a proper desktop browser and therefore does not handle feeds. but there is a lot of software out there to handle rss feeds. i personally use spb online 1.2, but there is also freeware, like this: http://www.dewantoro.net/search/pda+rss+reader+cab
i don't get the point with the usb switch though, maybe if that didn't solve your problem you should post further details about that issue and maybe post filenames or screenshots so we all know exactly what you are about to do.
You need not worry to install xml file if it comes with a cab. Cab file should be designed to use it automatically. xml files store usually configurable settings, it may be worth opening those files using any text editor like note pad or even IE to check the contents, that may help if any change is needed. But 99% chances are that you need not do any thing with those xml files.
I have found some people run in to this problem when they download a .cab file from the internet and once downloaded it is a .rar so you extract the .rar to find NOT .cab but .xml
Here is more about it and how to fix it.
http://forum.xda-developers.com/showthread.php?p=2367946#post2367946
I am trying to install a game on my MDA Vario IV , it does have .xml file. But no .cab files , only .000 file , .002 , .003 , and .004 files. How do i install this game then ? The installer is the .xml file.
EDIT : Nvm , fixed it , i needed not the files within the .cab file , but just the .cab file itself to extract in on my mobile.
Hello guys iam actually looking to install a sat nav software on my HTC TOUCH HD phone and i got this file called SETUP.XML Document and there's thousands of other files in the same location called KB, which i have no idea what they are but my problem is when i copy those files to my phone and open the SETUP.XLM Document, it opens by the internet explorer in the phone and it does nothing, please let me know if u know any answer to this.
Thank you very much....
nickholas said:
Hello guys iam actually looking to install a sat nav software on my HTC TOUCH HD phone and i got this file called SETUP.XML Document and there's thousands of other files in the same location called KB, which i have no idea what they are but my problem is when i copy those files to my phone and open the SETUP.XLM Document, it opens by the internet explorer in the phone and it does nothing, please let me know if u know any answer to this.
Thank you very much....
Click to expand...
Click to collapse
Couple of things:
You are in the wrong subforum. This section is for the Blue Angel. You should look for the Blackstone (aka Touch HD) section.
Now, the file that you opened is a cab file. You don't need to extract the contents of a cab file. Just copy it to your device and click on it one. The cab will install everything, including the settings in the xml.
Good luck!
Gili50 said:
I am trying to install a game on my MDA Vario IV , it does have .xml file. But no .cab files , only .000 file , .002 , .003 , and .004 files. How do i install this game then ? The installer is the .xml file.
EDIT : Nvm , fixed it , i needed not the files within the .cab file , but just the .cab file itself to extract in on my mobile.
Click to expand...
Click to collapse
Couple of things:
You are in the wrong subforum. This section is for the Blue Angel. You should look for the MDA IV (aka Touch Diamond) section.
Now, the file that you opened is a cab file. You don't need to extract the contents of a cab file. Just copy it to your device and click on it one. The cab will install everything, including the settings in the xml.
Good luck!
i just put together a cab file (for personal use) to remove sms threading (due to upgrading roms alot etc)
however i have hit a brick wall.
i do not know how to make the device restart after install?
i have compared to other cab files but the only difference is the other cabs install files not registry?
i'm not all that good with programming however i would really like to complete this cab for ease of reloading a new rom - so any input would be grateful - thank you
For cab file creating i use PocketPC Installation Creator. In the menu there is a check box to set the 'reboot after installation' behaviour. I played with it but noticed that my device only rebooted after installation of files. Because i found it to much effort to look into it, i didn't. After all it is quite easy to reboot manually.
You could use MSCEinf to examine different cabs and look for the reboot after installation setting (http://www.codeppc.com/telechargements/msceinf/msceinf.htm)
I also noticed that some people make cab files from .xml files (sleuth for example). Maybe this method has other options than cabarc in combination with inf files.
Cant give you any answers, still hope it will be of any help.
Good luck and post back result if you figured it out.
Arjan
The easiest way tocreate CAB files is to purchase a copy of WINCE Cab Manager from OCP Software
they have just released a new version which supports Vista
i created the xml document then created the cab from it.
should have said that sorry.
so i was looking for a way to restart device via the xml..
thanks for the input so far
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.
tazwik said:
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.
Click to expand...
Click to collapse
What are you trying to install?...and where? I am sorry if I am miss understanding you but it sounds like you have a file with a reg file and another folder named files? is this right?
something like that. when i down load a file its not a cab file.it is a zip file. when i unzip. it has a folder with program with some files in the folder, but out of the folder or root directory there is 2to 3 files look like reg file. i do not know where to place these file.
tazwik said:
something like that. when i down load a file its not a cab file.it is a zip file. when i unzip. it has a folder with program with some files in the folder, but out of the folder or root directory there is 2to 3 files look like reg file. i do not know where to place these file.
Click to expand...
Click to collapse
Could you link me to the file so I can see it?
im tryin to install it in to my htc hd2 phone. its a program i downloaded. from xda. like camara hack. ther is a folder and files on the root directory. in the folder though there is a camara icon or program.
tazwik said:
im tryin to install it in to my htc hd2 phone. its a program i downloaded. from xda. like camara hack. ther is a folder and files on the root directory. in the folder though there is a camara icon or program.
Click to expand...
Click to collapse
Post the file or link me to where you got it please. I want to make sure I give you good info so it works.
sounds like a cracked app, where you get the prog folder and a reg file to crack it.
samsamuel said:
sounds like a cracked app, where you get the prog folder and a reg file to crack it.
Click to expand...
Click to collapse
I thought so as well till he\she said they got it on xda, that made me think maybe a kitchen ext package
The cab files can be opened with winzip on your PC. The contents of a cab file is usually an xml file, icon file and other files for installation. Are you sure you are not opening a cab file in winzip?
zelendel said:
I thought so as well till he\she said they got it on xda, that made me think maybe a kitchen ext package
Click to expand...
Click to collapse
ahh yea.that makes sense.
ok for example. forum.xda-developers.com/showthread.php?t=611007
CUSTOM-djet-CameraSettingsPatch , it is a rar file costum patch. when i down load it has a folder and a files where do i place the folder and where do i place the files on my THC HD2
Thats an OEM package for use in kitchens when cooking ROMS. You cant install it to a running system. (Well, not in that form anyway)
tazwik said:
ok for example. forum.xda-developers.com/showthread.php?t=611007
CUSTOM-djet-CameraSettingsPatch , it is a rar file costum patch. when i down load it has a folder and a files where do i place the folder and where do i place the files on my THC HD2
Click to expand...
Click to collapse
I made the files into a cab for you.
zelendel said:
I made the files into a cab for you.
Click to expand...
Click to collapse
What does that one do exactly?
sirphunkee said:
What does that one do exactly?
Click to expand...
Click to collapse
From the look of the reg it enables one of the hidden functions in the camera. I thought most cooks enabled all the functions when they cooked up the rom but could be wrong. I know I do
zelendel said:
From the look of the reg it enables one of the hidden functions in the camera. I thought most cooks enabled all the functions when they cooked up the rom but could be wrong. I know I do
Click to expand...
Click to collapse
Gotcha, thanks man! Just wanted to be sure I wasn't missing anything I don't already have
icons
can u help me with one more thing. i downloaded some icons. it does not have any other files but icons and album file. when i place the file into the windows directory. gives me an message that it can not be overitten due to not enough space and file is being used. how do i change go around it.
thks jelendel. for making file in to cab.
similar problems/questions
most cab files/apps i download and install are very straight forward and I save to storage card and there are right there on my "start" screen. others I download and I cant find them? I look through the file explorer but either cant find them or dont know what to do if I do find the file.
example, egg timer 1.0 -I can find it listed on "remove programs" page page so I know I got it. but how do I get it to a more 'usable' location.
another example. I want to get the Bluetooth toggle (BTtoggle) from pocketnow site. I downloaded the app, then it says I need to edit my registry (I understand the dangers of this) at
"HKLM\software\HTC\Manilla" and change the value of HomeLSKPath to the path to your BTtoggle.exe .....etc.....
First time editing registry, so sounds like I need to get a registry editor. I looked for a free one. CeRegEdit version 5.2.exe file. looks like it downloaded ok but I cant find on device??
LASTLY, I use CoOkies home editor and I really like it, but does that mean I cant do other changes/app installs to any HTC sense items/lock screen/home screen/etc? thanks for reading this far....steve
Or if you know of easier to get bluetooth toggle or any kind of timer applications so I dont burn food at the fire station, feel free to reccomend...Thanks
808Granato said:
Or if you know of easier to get bluetooth toggle or any kind of timer applications so I dont burn food at the fire station, feel free to reccomend...Thanks
Click to expand...
Click to collapse
Aloha, and just because you're in civil service like that, I'll give you a hand with this one here...but it's usually best to open a new thread with a bunch of questions like that. You can just edit your post above to just say "moved to new thread", and then copy all that you wrote into a new thread you start...you'll probably get more views/responses that way too
These cabs will give you a toggle for bluetooth, wifi, and a reset button. Once you run the cab, you can find them in your start menu, but they're most useful when you assign them to one of the quicklink spots (on your home tab), just like you would any other program.
P.S. you'll find a lot more useful stuff for your new phone right here in these forums, and 99% of it is free, and known to work on the HD2 (unless stated otherwise). Start HERE and HERE