Hi guys,
This forum has already been invaluable to me with all the useful info it has! I'm hoping someone might be able to help me out with a problem I'm having:
I've installed the new T-Mobile ROM on my Vario in which I'm using a Vodafone SIM card. Now, every time I switch the Vario on, I get a "Message from Network" telling me which area code I'm in. Does anyone know how I can disable this notification?
I thought I had managed to stop this - I put the SIM card back in my K750i and unsubscribed from all cell info channels. The message didn't come up the next time I switched on the Vario but now it's come back again. I've deselected Broadcast Channels in the phone control panel.
Any help would be much appreciated!
"Message from Network" with area code
I also have a UK T Mobile Vario with a Vodaphone SIM. And I also get "Message from Network" after a soft reset and whenever the phone loses signal and reconnects to the network, which is probably two or three times a day on average. The message is just "020", the London area code (or the area code of wherever I happen to be).
I found a registry hack that says it fixes it, see http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=481854&SiteID=1. The hack is:
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
"EnableCBM"=dword:0
"EnableCBMChannels"=""
"EnableCBMDCS"=""
but it doesn't seem to work.
antlane, did you ever manage to cure this problem ? Any help you or anyone else can give me with this would be greatly appreciated.
My ROM details are:
ROM version 1.6.2.4 WWE
ROM date 11/15/05
Radio version 01.12.10
Protocol version 4.0.13.23
ExtROM version 1.6.2.105
Thanks.
Solution found ! Do a ROM Uograde.
I upgraded my Vario to the latest official UK T Mobile ROM (ROM version 2.21.2.6 http://www.tm-phonedownloads.com/download_manager_mda_vario.html) and this has cured the "Message from Network" problem. It also speeds up the phone greatly !
guys please let me know if u could cure that message from network problem..
thank u
i have ETEN X500 WM 6
Goto Start->Settings->Phone->More and disable Broadcast Channels!
thank u pat ... but thats already disabled... let me try something else
hey guyz help needed. i just bought an acer betouch 101 and i have not inserted a sim card yet.then too,i constantly get this "message from network" mostly saying-"x% off on dp". why is this troubling me and what does it mean could someone plz tel me.......???
Related
Hi, just got an MDA compact that was sim-locked to T-Mobile
After reading thru this forum i unlocked it on http://www.imei-check.co.uk
Only now i can use EVERY other UK SIM card inside it apart from virgin mobile. Every time i stick a virgin SIM inside it, i get the message "call ended" when i try to dial any number from the MDA and the message "calls are currently not being connected to this number" when i dial the MDA from another phone
Now i know it's not an issue with the SIM card because the virgin SIM works fine in my XDA 2 and in any other phone, so i'm guessing it's an issue with the MDA itself.
Has anyone else had problems like this with the MDA compact and if so, how did you resolve them?
Also this unit won't let me flash it with a new OS, every time i extract the original ROM, NTRW.exe gives me the message "OriginalROM.nb1 cannot be read - the file exists". Any help on this would be greatly appreciated too
OS ROM: 1.01.00 WWE
Radio ROM: 1.00.10
D (no idea what this is): 1337.36
okay, starting to think the MDA i found has been reported lost or stolen.
I'm guessing the reason that i keep getting the message "call ended" is due to the fact that virgin mobile piggybacks the T-Mobile network and so virgin was blocked off as well since T-Mobile blocked the IMEI. (I don't want to try to risk putting in a T-Mobile SIM in the phone so i'm not sure)
I can't return the phone to it's owner either since the MDA was wiped clean when i got it (owner musta forgot to charge it).
Ah well it still makes a good PDA
Well that's solved the problem of the "call ended" message. Anyone else who has that message after buying a phone off the net, you probably bought one that was nicked and resold.
It will be blocked on all networks unfortunately, only good as a phone outside UK so at least you can use it on holiday abroad.
Hi, I offer to pay anyone £50 if they can assist me in resolving the following issue. I have made two similar posts in different areas of the hermes forum but still not solved my problem.
Please see below.
http://forum.xda-developers.com/showthread.php?p=1267038#post1267038
http://forum.xda-developers.com/showthread.php?p=1263701#post1263701
You can contact me by email on [email protected] and msn - [email protected]
Time for a few more questions....!!
Hi,
Does your phone display the "U" (or 3G) symbol to denote that 3G coverage is available?? I looked at your website to get your location and plugged it into http://enableoci.orange.co.uk/uk/UKCoverageSearch.htm (I used the town rather than the postcode to get an overall coverage map) - it looks a bit patchy to me (for your work postcode, the local area looks pretty good); I guess it depends on whether you're using the phone at work or when you're out and about?
Do you know what radio version is on your phone; has it been updated with one of the radios and/or ROM's from this site or does it have the standard issue Orange radio? You can find out by going to Start | Settings | System tab | Device information. If the radio version is >= 1.38.x.x then you should be fine (although some people on Orange have reported that radio 1.41.x.x is not as good as 1.40.x.x - opinions vary ).
Do you or any colleagues have another Orange 3G phone that works where yours doesn't?? We need to establish whether the problem is just with your phone or whether it is in fact related to the 3G coverage generally.
Let me know how you get on
Mark.
Hi Mark,
My mission is to get this phone working on Vodafone 3g. I was testing Orange to see if it was a network problem.
I am now at my office and when in phone mode it now displays
UMTS Orange and the 3g signal, calls and browsing are now allowed!!
Here is the device info:
Rom Version 2.11.255.1
ROm Date 03/07/07
Radio 1.38.00.10
Protocol Version 32.71.7020.12H
ExtRom 2.11.255.104
I am just waiting to get a Vodafone 3g Sim Card to test, to see if it was only a matter of location.
Many Thanks
[email protected] for MSN or Email.
Have you tried the radio engineering test application?
I had a similar problem using my Vodafone with an O2 SIM card. I'd installed the O2 settings cab but still the data stuff wouldn't work.
The problem turned out to be that the data connection was still trying to use the Vodafone settings. To resolve this I installed Daniel Herrero's Bandswitch. This allows me to disable connection settings and only leave the settings active for the current SIM.
I have an O2 XDA mini s as its so called, and an Orange Sim (both UK)
Now I can make/receive calls fine, but when I try to send a message, or goto the "phone" option, I get the message below. Nor do any contacts from my sim show up.
"The phone is not ready. Wait 15 seconds and try again"
Does anyone have some advice to resolve this as its pretty annoying!
I did try a search and got no results, so please forgive me if this is a topic that has been given the run around before.
Regards
Sam
Sounds like the simcard is dirty try taking it out and inserting again happens on probs every1 phone sometime.
Another option would be to go back to your cell provider and request they give you another SIM card
sounds like you might not be getting a strong enough signal to use the phone...or send out messages...consider flashing your radio rom to something higher (do a search for radio rom). radio rom flashing usually won't effect the os or ipl/spl...so you can keep all your existing settings. newer radios have more information on towers...so it has a chance to get a better signal...or at least that's what i've been told...
2.19.11 is common for cingular...but there's a post somewhere on changing something that will let you use higher radios with cingular without too many problems...personally, i'm messing around with 2.69.11 (t-mobile) and i haven't had any problems...
Tried cleaning the sim card to no avail.
As with regards to the radio rom, im sure thats the issue as i can make phone calls fine, so im getting a signal. It just seems accessing the sim card and texting is the issue
Its bugging me because its an awesome phone. Im wondering if its due to it being a different network branded phone to the sim card im using...
Sam
Ozington said:
Im wondering if its due to it being a different network branded phone to the sim card im using...
Click to expand...
Click to collapse
if that's the case, you may need to sim unlock your phone? but if you're making and receiving calls, you should be fine...
if the sim card is old, or the service provider was taken over...or something of that sort, maybe your sim card has a problem...something like this was a problem back in the US when cingular bought out at&t...the problem was resolved by consumers going to cingular to get a 64kb sim card rather than a traditional 32kb...perhaps something of that sort is happening there?
I suppose that is a possibility,
I will try using the unlocking tool, but im not sure it would be the sim as it is only 2 months old. I just didnt like the phone i got with the contract so bought this.
I will certainly try. I kinda wish i'd just bought the Orange version of the phone
Oz
@Ozington. If you can make calls, chances are your phone is already unlocked. Did you bought this phone 2nd-hand? The previous users may have done something to it. Soft reset your system and tell us all your stuff (especially the Radio/GSM displayed) displayed on the first boot screen.
Alternatively, if you want to avoid all O2 crap, hardreset your phone and during init setup, soft reset it (poke it) just after you have done your security settings. If it is not using official ROM (e.g. no O2 stuff around to be seen), make a guess on the ROM used, and you can also try upgrading an official ROM (safe to do so).
Hanmin,
The phone was bought from ebay, but was brand new sealed, all in o2 packaging, the seller stated it was unlocked. It was all factory packed and the seal wasnt broken..
The Device info is as follows:
Rom Version 2.21.4.1 WWE
Radio 02.07.10
Protocol 413.1.03
ExtROM 2.21.4.101
Does this mean anything?
Regards
Sam
I'm doubtful that it is factory sealed and unlocked. From the information you gave (although not those I've asked for), seems that your phone ROM is a bit, old. Go to O2 webpage and download an update for the ROM (I'm not sure, but I think they have an updated ROM).
To check your ROM version, tell me the battery icon on Today screen, is it on the top left or bottom left. Top left battery icon means it is AKU2, the updated version.
To throw a spanner in the works the battery icon is in the top right?
Thanks for your help. What info did i miss out? (Please bear in mind i have no idea what im doing with the more technical side of the phone!)
Regards
Sam
I briefly had this problem as well. In my case, I could also receive text messages, but still could not send. I changed OS's and it was fixed. The problem only seemed to happen with one of the new OS6 roms. It was intermittent, and even resetting the phone seemed to solve the problem occasionally and briefly. I have flashed my device too many times, but think it was the most recent Touchflo version that had the problem for me. I was using radio 2.69 Ipl/Spl 3.08. I hope this might help. Good luck.
Orange SIM & Unlocked T-Mobile MDA Vario
Hi Guys,
Just a quick note to say that I have a similar problem with my new Orange SIM.
All the GPRS works fine, calls send & receive OK, POP3 email works a treat but no text messaging and when I try Start > Settings > Personal > Phone .. I get "The phone is not ready. Wait 15 Seconds and try again"
I have no answers to this but from all the searching I have done over the past few days to try and find a cure this problem seems to be common to Orange SIM cards. All I can think of is that the Call Centre Message Number needs changing to get the txt messaging to work.
The phone has worked fine on other networks - no GPRS but text messaging & phone calls
Any advice gratefully received !!
Hi guys first poster so be nice
I've got the same problem but came from T-Mobile to Orange.
My IPL / SPL is 1.03 so I'm going to upload the newer versions on the fourm to my phone and see what happens tommrow. Havn't got the time at the moment but I'll post up how I get on.
Do you guys think this is a good approch to the problem I've got?
Hi Sasyboy
You posted just after me. I got my phone working great on Orange now. It has taken me 3 days !!
You'll have to be careful on how you do it. I just jumped in and it caused me a lot of work and time. and a long period where I thought it was bricked 'cos the bootloader screen stayed on and I lost all comms with the MDA
First make sure the CID is unlocked, you must read this:-
http://forum.xda-developers.com/showthread.php?t=285435
I wish I had. This may seem a long way of doing it, but you don't want an expensive paperweight do you ??
After you have unlocked the CID and updated everything as per the Dr P stickie (link above) and it is working, you then need to get the Wizard_Love ROM upgrade. I tried after doing all the Mr P instructions in the stickie but still kept getting the "Phone is not ready...." so I decided I then needed the Wizard_Love ROM upgrade. This took me ages to find, I tried to d/load it via uTorrent but only got 25% and then found it on a Russian website - anyway I have it now, and as I said you'll need it, PM me and I'll get it to you.
You will have to download several files and set half a day aside. If you are struggling PM me and I'll get the files to you as I have them now.
I just need to get the Ornge MMS settings right and then all is fine. GPRS, POP3 email, Internet, Txt messaging OK now, SIM manager works fine (didn't even have it before!) and can access all phone settings for call divert etc
Good luck. Any queries I may be able to help, but I'm no expert. I have spent hours looking at this forum and all the answers are there it is just getting them in the right order.
How do all,
Really happy I updated everything and now it all works fine. Thanks to the community. I love this phone and now with updates it's even cooler.
I've loved my Blue Angel for 2 1/2 years thanks to xda-developers, but right now I just wanna throw it away!
I have a Cingular SX66 (PH20B1) running WM6 from Xplode (6.00.00.WWE) and the radio 1.15. After I upgraded to WM6 everything was kind of OK I thought, until I realized that sometimes calls weren't getting through to me and I was getting 'No service' too often. That's when I upgraded the radio to 1.15. I was getting the no radio error, but I found through searching that if I soft reset and keep the phone charged the radio comes back.
Here's my problem.. even when the phone gets out of 'No service' and finds the network (even showing me full signal strength) I can't make calls! Calls won't come through to me! It's pretty useless as a phone, but it seems to be usually able to send text messages if I have the network. It takes endless soft resets and long waiting just to get it to see the network, and then the phone still doesn't work.
The sim card is fine, and it seems the problem is the same if I downgrade to 2003SE (by the way, I only seem to find T-mobile ROMs that work.. don't know where the WM2003SE ROM is I originally had on here).
The phone only seems to work sometimes if I after I soft-reset, I make the call while the BA is still on the cradle.
If anyone knows of a solution I'd really appreciate it.. on WM2003 my SX66 would only act funny if the charge fell to 60%. Now it's wacky with all the up/downgrading/charging/soft-resetting I've tried.
Thanks!
Additional info
I don't know if this is related, but I have the storage almost full of installed programs and the device is much slower now. Also, the Data Connection buttion is grayed out in HTC Comm Manager.
The phone seems to be working right now. Give it an hour and it'll probably be wacked again
Final solution for 'No service'
Hi burnblue...
Try this thread: http://forum.xda-developers.com/showthread.php?t=340557
This resolved my problem...
1) In WM2003 and install bandsel .CAB
2) Choose a band of your operator gsm/country (in Brazil, for my operator is 900/1800Mhz (Operator "Claro" and "TIM")... here in Brazil we have another operator what works in 850mHz (Operator "Vivo").
3) If you want, upgrade your rom for WM6 (much better)... your band selection will be fixed (came to wm2003). I don´t undertand about fixing a band remain after rom version upgrade... No explain about this.
No more issue about radio gsm signal, be happy....
Works perfect to me, I´m 100% certain about this procedure.
Rodrigo Pelosini
burnblue said:
I've loved my Blue Angel for 2 1/2 years thanks to xda-developers, but right now I just wanna throw it away!
I have a Cingular SX66 (PH20B1) running WM6 from Xplode (6.00.00.WWE) and the radio 1.15. After I upgraded to WM6 everything was kind of OK I thought, until I realized that sometimes calls weren't getting through to me and I was getting 'No service' too often. That's when I upgraded the radio to 1.15. I was getting the no radio error, but I found through searching that if I soft reset and keep the phone charged the radio comes back.
Here's my problem.. even when the phone gets out of 'No service' and finds the network (even showing me full signal strength) I can't make calls! Calls won't come through to me! It's pretty useless as a phone, but it seems to be usually able to send text messages if I have the network. It takes endless soft resets and long waiting just to get it to see the network, and then the phone still doesn't work.
The sim card is fine, and it seems the problem is the same if I downgrade to 2003SE (by the way, I only seem to find T-mobile ROMs that work.. don't know where the WM2003SE ROM is I originally had on here).
The phone only seems to work sometimes if I after I soft-reset, I make the call while the BA is still on the cradle.
If anyone knows of a solution I'd really appreciate it.. on WM2003 my SX66 would only act funny if the charge fell to 60%. Now it's wacky with all the up/downgrading/charging/soft-resetting I've tried.
Thanks!
Click to expand...
Click to collapse
"no service" is a issue...
Your problem about slower is another problem...
Storage full ~ slower... I had problem´s about these in anothers pda´s.
Take easy to storage your files, much components in today screen, etc...
Use sd card, this help.
Upgrade for Wm6 (xplode rom) and be happy...
WM6 by xplode is faster.
What´s your radio rom version? 1.15 ?
If < 1.15, then upgrade....
Rodrigo Pelosini
burnblue said:
I don't know if this is related, but I have the storage almost full of installed programs and the device is much slower now. Also, the Data Connection buttion is grayed out in HTC Comm Manager.
Click to expand...
Click to collapse
not yet
Thanks for the advice rod, but I still have problems.
1. I saw that thread too, and it's not that I have totally 'No service' -- I have signal but calls just won't connect. It might work one minute, but 90% of the time it just doesn't.
2. I can't find a working ROM for my SX66 to downgrade to 2003. I remember weeks ago when I was trying to fix this I think I found a T-mobile ROM, but nothing is working for my downgrade now.
Why is my phone radio so unreliable?
Strange problem...
I have some tests for you...
1) Do you enable PIN ? If yes, then disable.
2) Do you upgrade your radio rom to 1.15? No? Then apply.
3) Do you have problems with anothers gsm chip ? Your SX66 is gsm or cdma ? Possible issue in your gsm chip, maybe... Try another gsm, another operator...
4) What´s the message errors or problems with upgrade or downgrade rom ?
If your sx66 is a cdma phone, sorry, I don´t have any idea how to help you.
In this case, ignore all my questions. My experience in Blue Angel is about gsm...
Take care...
(Send a message if you resolve or not this case...)
Rodrigo
burnblue said:
Thanks for the advice rod, but I still have problems.
1. I saw that thread too, and it's not that I have totally 'No service' -- I have signal but calls just won't connect. It might work one minute, but 90% of the time it just doesn't.
2. I can't find a working ROM for my SX66 to downgrade to 2003. I remember weeks ago when I was trying to fix this I think I found a T-mobile ROM, but nothing is working for my downgrade now.
Why is my phone radio so unreliable?
Click to expand...
Click to collapse
Was given a SPV M700 with WM6 (Rom version 2.0.8.1), GPS and WiFi working great but not the phone - cannot get a connection and I have tried different working Sim cards! Do I reflash with a new WM6 rom (which is recommended?) or just with a Radio Rom (current version 1.46.00.11) . Oh, I have checked the IMEI and that is not blocked. I don't mind having a go at reflashing as I also have a workiing HTC P3600. Never done this work so any help appreciated.
M700 not working
I have flashed the "phone" with a new radio rom but still getting the message that it cannot register to any of my selected networks. Next step, I guess, is to try a completely new rom. Any one got any ideas why the "phone" is not registering? **Update** Have tried two different 6.1 roms this morning and still can't get the phone to register with any networks????
Replying to myself, I know.. Latest situation is that latest Radio rom and decent WM 6.1 rom installed. I have inserted a Virgin Sim Card from another working phone and it shows a UMTS T-Mobile UK connection and even the 3G icon. However, when I try to dial out, it immediatly drops the line and if I try calling the phone I get the message that "calls are not currebtly being connected to ths number". ****Any clues****
is the virgin sim new have you used it before ie is it active?
and the phone is not set to flight mode silly i know but my girl put my phone in flight mode and it took me a few hours trying to find out why i was not able to make a call but i only had the phone a few days and did nt knw it had a flight mode.
if its not some thing like that then not sure what else to look at sorry cant be more help
Did the phone ever work? You mention that you got it, did it work for that person?
what provider did he use?
Is it locked?
did you try to cid unlock it?