Navigation Software Audio over BT - JAM, MDA Compact, S100 General

How do you guys listen to your voice navigation software? I have the supertooth II BT handsfree set, and make and receive my phone calls through it. Now when I go into my nav software, the audio goes throught the loudspeaker, or I have to use the cable earphones (supplied with phone).
Using the earphones is a bit stupid, then I might as well not have the handsfree in the car. I would like to get all audio & sound to go to my Supertooth.
There was a site I found where a guy posted software that sends all audio to a bluetooth headset. Now this was a Samsung i730 post, now I wonder if it is not written for the i730, as I tried it out, and it switches my Supertooth on, but still nou audio can be heard.
Will something like a BT audio transmitter that is normally used to trasmit audio from a MP3 player to a hifi work?

Related

Set as Hands Free

I'm somewhat puzzled about the terms Headset and Hands-free.
There is an option to set my BT headset as hands-free, but I have no idea what that does.
My BT headset (airoblue) is supposed to have an mp3 interface, but when I play an mp3, the sound comes out of the speaker.
I would like to hear all sound to go through my BT headset.
So there are 2 questions in the latter:
1. What is the difference between Headset and Handsfree?
2. Is it possible to have all sound go through my BT headset?
any ideas?
I can answer the first one.
Headset is pretty straightfoward...plug in your headset, use your bluetooth, etc
Handsfree is kind of like speakerphone I guess. No headset or accessories required, the sound is played thru the phone's main speaker instead of the earpiece, so that you can sit the phone on the desk in front of you and hold a conversation. (I haven't used this feature on my mini yet tho, so no idea how well it works and I *think* you activate this mode by holding down the green answer button onc the call has been answered).
I think you misunderstood the question bleepy. The latest Radio Stack of the Magician seems to implement the Handsfree Profile for bluetooth in addition to the Headset profile. The difference between these two is, that Handsfree has some additional capabilities compared to Headset. I think it allows voice dialing as well as initiating calls by the headset (therefore: Handsfree!). It is not meant for audio transmission and i doubt that the WaveOut of the Magician is linked to the bluetooth profile. That's what the A2DP profile is there for. This is not included in the Microsoft stack and i think currently also not available from third party developers. So I think you should forget about the audio streaming over the headset, also because the audio quality should be really bad since the handsfree profile wasn't developed for music streaming.
Thanks for the clear explanation.
I hoped there was a way, because it is nice to watch a movie or something in the plane, or bus.
Guess I'm stuck with the wired headset.

[Resolved] Question re car stereo, aux and bluetooth

I have a feeling that this can't be done (because I looked into it with my XDA Exec a few years ago), but....
Is there any way that I can play mp3s via the extUSB into a car stereo (via an AUX in) and yet answer calls via the same stereo's integrated bluetooth via the headset profile?
The stereo would normally drop the AUX in sound for a bluetooth call, but clearly the extUSB would normally handle calls if a audio output device is plugged into it. With my Exec, I seem to remember that the hardwired audio output would be the default, and so the bluetooth would never engage.
If there is a hardware solution, I would be very keen to know! Even better if the extUSB also charged my Vario IV in a passive holder.
Jock said:
I have a feeling that this can't be done (because I looked into it with my XDA Exec a few years ago), but....
Is there any way that I can play mp3s via the extUSB into a car stereo (via an AUX in) and yet answer calls via the same stereo's integrated bluetooth via the headset profile?
The stereo would normally drop the AUX in sound for a bluetooth call, but clearly the extUSB would normally handle calls if a audio output device is plugged into it. With my Exec, I seem to remember that the hardwired audio output would be the default, and so the bluetooth would never engage.
If there is a hardware solution, I would be very keen to know! Even better if the extUSB also charged my Vario IV in a passive holder.
Click to expand...
Click to collapse
What about playing music through the blue tooth of your car stereo? Tricking the car into thinking its actually engaged in a call so it plays music. Might have to be something done on the phone side to transmit the music as a call and then when you receive a call the music stops and you can answer the call and when the call ends music resumes? Just a thought i dont know if it is possible at all. But you bring up a really good idea.
ptyindian said:
What about playing music through the blue tooth of your car stereo?
Click to expand...
Click to collapse
Thanks for the thought, but the stereo doesn't accept bluetooth streams - it simply just has the ability to act as a hands free device.
Any more thoughts anyone? (Although someone has just posted about a device that looks intriguing with AUX and power in)
It's definitely doable. Thats what I've done with my non BT Pioneer deck. Check out my post here - http://forum.xda-developers.com/showthread.php?p=3278241#post3278241.
Hope this helps.
mattyman said:
It's definitely doable. Thats what I've done with my non BT Pioneer deck. Check out my post here - http://forum.xda-developers.com/showthread.php?p=3278241#post3278241.
Hope this helps.
Click to expand...
Click to collapse
Thank you too for the feedback, but I can't see a bluetooth device in your chain. Perhaps I wasn't clear in the original post, but in the end I suppose the question is can calls be handled over bluetooth when there is any audio outpu device plugged into the extUSB?
Sorry. My bad. You are right, I did misread your post.
Jock said:
Thank you too for the feedback, but I can't see a bluetooth device in your chain. Perhaps I wasn't clear in the original post, but in the end I suppose the question is can calls be handled over bluetooth when there is any audio outpu device plugged into the extUSB?
Click to expand...
Click to collapse
the answer is yes. that is what i do daily.
i listen to music through quality wired headphones, and when a call comes in i use my bt headset WITHOUT unplugging the headphones from extUSB.
all you need to do is answer the call using the answer button on your bt headset and not your phone.
in some phones, if you will press the send key on the phone and not the bt headset, the call will transfer to the phone instead of the bt headset.
hope i was able to help.
shlomki said:
i listen to music through quality wired headphones, and when a call comes in i use my bt headset WITHOUT unplugging the headphones from extUSB.
Click to expand...
Click to collapse
Thank you.
Do you think it matters that you're using headphones rather than a headset? I'm just wondering, since you refer to headphones, if the lack of speaker in your wired device means the call will hand over to the BT device - this will allow me to work out what I need to buy.
hmm i think since your aux input wont really have a mic attached it should hand over the call to the bluetooth headset from what the other person is saying.
Hi, I don't know if this will apply to your stereo setup but I thought I would let you know my setup anyway.
I use the HTC multifunction audio cable http://www.expansys.com/p.aspx?i=171925 which lets me charge my phone via a car charger and use the 3.5mm audio output to the stereos aux input at the same time - all of which are in center armrest compartment.
I use bluetooth connection to the factory installed bluetooth prep (BMW 3-Series). When a call comes in the TP pauses the audio and the BT phone then takes over. When the call ends the TP un-pauses the audio
I just installed a Blaupunkt MP57 on Sunday and did exactly what you're describing. Phone connected via aux playing music, answer or make calls via bluetooth on the stereo and the music pauses then restarts when the call is ended.
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
http://www.acbpocketsoft.com/Products/acbToggleBT/acbToggleBT-Free--3.html
Both can send all outgoing audio from your WM device via BT headset channel instead of A2DP. It's not advanced audio but it will let you play audio over the headset BT channel. Sound can be tweaked using SRS WOW HD.
ExtUSB is just a port which will enable playing MP3 tracks on for example USB drive? Why not put your connection in USB mode then?
I'm not sure if this will help you, but I bought a Motorola Bluetooth Car Kit. I don't have the "phone" feature built into my car Stereo, so I used the external amplified speaker and mic for "phone" functions. The Car Kit has an Aux Out, with I feed into my car stereo. When I get into the car, the Bluetooth initiates two separate "connections". One for the "phone" and one for the "MP3 Player". You can have either one or both. The music plays through the car stereo (via the Aux Input) and phone calls play the the external Car Kit Speaker. It is like having two independent bluetooth "channels". When I have Voice Commander enabled, it communicates through the "phone" channel, i.e., the Car Kit mic and external speaker. That is also where my incoming email is announced through. My Garmin GPS "speaks" through the Aux out and the Car Stereo though. I'm not sure how these routes are selected. Personally, I would prefer that the GPS also communicated through the "phone" channel, that way if I am listening to the Radio, or Sirius, or a CD (not on AUX-IN), I would still here the GPS voice guidance. I'm not sure if that can be changed or not.
Hope this helps.
I do this all the time. USB to 3.5mm stereo to Pioneer head unit and calls come in over the BT
Thanks all for the input.
Just bought a Brando adaptor:
http://www.inkino.co.uk/zen/index.php?main_page=product_info&cPath=126&products_id=1502
Tested it and Copilot and Music run from the Aux out. Bluetooth hand over perfectly. As an aside, I find WMP is a better MP3 player, simply because I can reduce the volume in the software, but leave Copilot to use the system volume at a slightly higher level so the voice doesn't get lost (the HTC player doesn't seem to have the same capability).
Could have bought the HTC branded device from the same place, but the main lead from the Ext USB is slightly longer and more inflexible so wouldn't easily fit under my car holder.
BTW, since I live close to the shop (plus I love instant gratification as opposed to mail order), I visited the Inkino shop in London. I must say that the staff were very knowledgeable and helpful and the shop has a huge range of HTC accessories (including a branded battery and extended battery for my Universal, which I am planning to resurrect). Not sure about the prices vs ebay, but for the bricks and mortar approach in the UK, where it is difficult to find anything HTC - 1st class!

Call Audio vs Media Audio with Bluetooth Headset

I recently picked up a Bluetooth Headset, and I was quite surprised to discover that my G1 was pumping ALL audio into the headset instead of just the in-call audio. My main problem is that I use Telenav GPS, and when it talks I can't hear the person I'm talking to. Ideally, the G1 should be playing the call through the headset and the GPS sounds through the built-in speaker. Is there any way to force it to behave that way?

Mp3 playback thru parrot car kit

with my old n95 8gb phone i could play my mp3 files on it in the car and as it was connected to my parrott car kit i could hear it thru the cars speakers -
but i cant do it with the hero - yes the hero works perfectly with the car kit - but when you go inot the music player on it - the music only comes out fo the phone -
has anyone any ideas ?
What parrot car kit have you got? The sound from the MP3 links using A2DP BT profile (designed for highish quality stereo output) and only the latest Parrots use that (my CK3000 does not) All the others only support handsfree BT profile which is mono and poor quality. So it will not pick up the music from the Hero.
To elaborate, *some* phones will play music through the hands-free profile. iirc, I could do it on my HTC Vogue with WinMo.
You are right but I have never managed to get my Hero to. If anyone has I would be interested in hearing how. Trouble is it will be mono lo-fi quality.
At least the sat nav voices uses handsfree - on my previous WM mobile the TT voices came through A2DP and I had to get an app to change it
Correction the sat nav voices do not use handsfree profile on the Hero - I think they use A2DP and so my Parrot is unable to pick them up. However they are loud enough to hear on the phone's loudspeaker.

[Q] music through my jawbone bt earpiece?

is it possible on the vibrant to stream music to my jawbone bt earpiece ? i used to do it on my touch pro 2. but with android im not sure ? help me out guys please
Yes, it's possible (though it may depend on what model Jawbone you have). Make sure your Jawbone is updated with H2DP and your phone should be able to recognize that the headset can be headphones as well. Check out the Jawbone website for more info.
If his jawbone is like my old one ( now use a Plantronics Pro), it didn't support Stereo (H2DP)
One of things I plan on looking into the Android source for is why someone hasn't come out with a "Mixer" app to route Media out the BT Headset profile. I'm sure there's a technical reason.
I've never seen a phone send music out to a BT headset... I don't understand why that is, it does if you use a wired headphone.
Things like podcasts should be fine in a mono headset. Even music would be better than nothing.
Robert
A2DP?
The new jawbone hero has an update that supports A2DP. Music sounds terrible through it tho, I even streamed NPR's car talk through it and it was scratchy. For some reason too, the phone prefers streaming over BT rather than through the audio jack when it's plugged in. Turned off the audio profile for the headset.

Categories

Resources