Related
Hi guys,
ive had my exec for about 2 weeks now. In the last week it has started to randomly loose network signal. It keeps searching till you either soft reset it or turn flight mode on and off. It will find a signal in about 10 seconds after that.
Is this there a 'dont keep loosing signal' setting that im missing?!
Mine does the same thing - annoying as hell! Not worked it out yet.
Are you talking about telephone or GPRS signal ( U or G )
Phone signal
everything! it looses all signal.
I called o2 and they want me to go into an 02 shop for them to have a look at it before they give me a replacement
The are all 'handset trained' apparently.
I also called o2 a week ago stating the same problem, They gave me a refferance number and said they will look into it, But of corse 1 week later they have not called me, So this afternoon i will find the referance number and give them a call.
I will post ther Bollox answer on here tonight
John
Same problem here with a MDA Pro. I ahve noticed that this happens when I am roaming in Germany as well. Very anoying. That and the thing freezing in a call and needing a re-set. This is my second one as the first one the screen portion became loose, happened on the one before as well.
I have the same problem althoughmine will refind the signal after about a minute. It seems to disappear whenever I ask thephoneto do something new (open a program etc).
I finally persauded T-Mobile to exchange mine so I'm getting a new one delivered tomorrow.
I'll let you know if that fixes it!
Andy
My XDA2 used to lose its ability to communicate if I was out of a signal area for more than 15 minutes, but I haven't had it happen yet with the Exec. A soft reset or Flight Mode on/off cycle would fix it.
It is frustrating but didn't happen often.
Well i phoned o2 and they said there was still no answer and that no one else had complainded about this, So i told them of this forum......
As per the last post i have also had this on a 2 and 2i, and i gree if its out of servie for a few mins its seems to give up looking for service until you reset.
mine has done it overnight befor, i looked befor going to bed and it had just the 3 dots flashing where the aerial should be. the next morning it was still the same, quick soft rest and into full service, thats when i first rang o2
John
I've had this on all my XDAs in the past, and seems to continue with the Exec.
Very annoying, but not sure what can be done about it.
Ant
guys,
wait for a rom upgrade from o2, ( with new radio rom)
that should solve the problem.
happens with xda, xda2, skipped xda2-i and xda2-s,
and now it's back.. :roll:
Hi Guys, I have been having this problem for weeks with my MDA Pro. I convinced myself it wasn't the phone and that it was T-Mobiles Network. In desperation last night I spoke to T-Mobile about the problem. They told me it was a faulty phone and that I would have to contact the supplier of the phone and ask them to replace it. I tried to explain others had the problem and that I wasn't happy to have to send my phone off and wait for a replacement. But no avail. So I sat down at home and looked at the settings. I think I might of cured it! Maybe it is a fluke but by clicking the signal meter and going to settings, then changing network selection to manual it has stopped hunting when it loses signal and quickly re-picks it up. HNope this helps others.
Giles.
abarthsmart said:
changing network selection to manual it has stopped hunting when it loses signal and quickly re-picks it up. HNope this helps others.
Giles.
Click to expand...
Click to collapse
Defenitely...that did it.
I had the same in Holland with KPN: while switched to manual no more problems.
In Romania however, where I also have UMTS, I had to switch it back (or it switched itselve back, after changing SIM card, I don't remember) to AUTO.
There it switches from GPRS to UMTS if UMTS signal is OK.
Huib
Ok, i have the same problem. Have GPRS Always on set in registry and 10 minutes ago, my MDA Pro lost GPRS connection. It trys to reconnect all the time. But no Connection can be build up. After Flight Mode and back, i get a connection immediately. But on start of MSN Messenger, it loses the connection again and does the same loop like before. Only a softreset brings my connection back to live.
Looks like a ROM issue. Maybe GSM or CE.
I am delighted to say that my replacement MDA Pro seems much more stable in the signal department. Although I still loose signal ocaasionally, I no beleive that is due to poor signal area and not the phone...
If you phone isloosing and reconnecting all the time then like mine it is probably faulty! Hopefully the ROM upgrades will sort out the last few issues I'm having!!
I love this phone!!
Same problem with JASJAR
People still have this problem? i'm using radio 1.03.01. When i used the original firmware, the phone part would lock up (Would get the busy - wait 15 seconds and try again, but it would never clear - had to soft reset)
With the 1.03.01 radio, i still get disconnected, but it'll find the signal again after a few retries - which is very bad! I rely on the phone at work, and people can't get through when it's disconnected. I have full signal strength (4 bars) so it's a software/hardware problem.
It looks like maybe it happens more frequently when charging or activesync'ing, than when it's disconnected from usb.
Can anyone confirm having the same problem, and it getting better or FIXED with the new radio firmware? If not, i'm going to have to return it.
Michael
I am using radio version 1.04.02 on the O2 exec, although i use a Vodafone SIM (supplied by work!). Mine suffers from the same problem, mainly at home, which is a very odd signal area for Vodafone. I can go from no signal to full signal to none again, and yes, sometimes it drops completely and needs a soft reset - bingo! full signal again.
Switching the network type from auto to GSM does seem to make the unit a little happier, but i need to use WCDMA when possible, so i leave mine on auto and live with the dropouts!
Lets hope the next rom fixes the problem.
Cheers
Paul
I have the same problem with my XDA and O2. a soft reset nor a full reset have been able to fix the problem. :roll: is the new rom version available as yet?
Here's mine
Model: MDA Pro
ROM/Radio/ExtRom: 1.12.42WWE | 1.00.02 | 1.12.126WWE
Design Flaws
No external display. Many cheapie prepay phones have this, why didn't the universal get one?
Usability Issues
When closed and Off, phone does not actually ring until 3rd ring. Leaving just 3 rings to answer it. Most calls hence go to voicemail due to not enough time left to answer.
When closed, and someone rings, the external start/end call buttons dont light up so I cant see which one is green(answer call) and which one is red(end call). 50% of the time I press the wrong one sending the caller to voicemail!
No simple, built in way to close rather than 'minimise' applications
Built in contacts app and calendar still unusable. MS: please just give up and buy Web IS !!
Software Bugs
Sometimes 2 of the wifi icons dissapear from the 'connections' tab under settings requiring a soft reset.
Wifi often fails to connect, needs switching off and then back on again, then it sees AP.
Loses the mobile network signal occasionally, for no reason (i.e even in 4 bar signal areas)
I'll add more as I remember them. But HTC/MS are getting better, the hardware and initial ROMs of the MDA Pro are worlds ahead of those on my XDA IIs (which was totally unusable initially).
Having a low battery means that device switches on every 5 mins to tell you about the low battery thus causing lower battery. Tell me once and then goto sleep! Or tell me once for 10%, once for 5% etc
If software causes the unit to switch on (in order to issue a notification) the same software should switch it off again after, i.e dont wait for the default 'not being used' timeout.
Nigel
Grrrrr
Ok .. I have an M5000 on orange, I have owned it for almost a week. My Rom/Radio gubbins are whatever Orange lock it at. My biggest complaints are:
1) Service Plans - There doesn’t seem to be a network in the UK that offers a service plan (more data, less voice) suited for the device. A trick was missed here I think!
2) My manual talks of GPRS counters and graphs.. My phone does not have any such features. All the more relevant given my 1st point and that the price per MB is horrendous on most networks.
3) Tolerance - My unit needs a reset at least twice a day. Sometimes because it can’t find GPRS coverage, sometimes coz it’s just slow. Back in the day when i purchased my 1st IPAQ I had to reset that a few times a day. I have been off in UIQ land for the past few years and I am surprised that this far into product evolution you die hard windows mobile/PPC fans have been putting up with the same crap for years. You are perfect customers and a tolerant bunch ;-).
4) Incoming call delay – I read that this is fixed in later roms. I tried to install a JASJAR rom and failed. My phone is locked. Blastit !
5) Windows Mobile Media Player 10 – a pointless piece of software, how do I delete it
6) Speed – In between reboots my unit is inconsistently slow. I have tried all of the points suggested in this forum aside from the rom updates (I cant do that).
7) Email – The email client is dire. I use IMAPS and SSL SMTP. Everything is find on mail accounts with low numbers of messages in ( < 100 ). The wheels fall off very quickly if you ask the client to download mail from a mbox with a few thousand messages in and lots of folders. So far I have lots a mail account twice and left it saying “updating folders” for 3 hours while connected via wifi.
8) Email Again – Like I said .. I use IMAPS and SSL SMTP. I use self signed certs. The 1st time I created my mail accounts and connected the unit asked me if I wanted to proceed with the self signed cert shenanigans. After that I was not asked. When I look for the certs in the certificates app they are not there. Where are they?
>1) Service Plans - There doesn’t seem to be a network in the UK that offers a service plan (more data, less voice) suited for the device. A trick was missed here I think!
Agreed, t-mobile with web-n-walk are the closest, but poor 3G coverage and no possibility to upgrade bundled data from 40MB (other than £1/MB Pay-as-you-go) + unused data not carried over to next month are the main issues.
>2) My manual talks of GPRS counters and graphs.. My phone does not have any such features. All the more relevant given my 1st point and that the price per MB is horrendous on most networks.
You should have found an application called 'spb GPRS Monitor' on the CD?? install this after having got the machine connected via activesync and you'll have the missing part of the puzzle. This is somet else that should be included within the OS -- MS please buy spb !
>4) Incoming call delay – I read that this is fixed in later roms. I tried to install a JASJAR rom and failed. My phone is locked. Blastit !
Indeed, phone should have never gotten to market with this major bug.
>7) Email – The email client is dire. I use IMAPS and SSL SMTP. Everything is find on mail accounts with low numbers of messages in ( < 100 ). The wheels fall off very quickly if you ask the client to download mail from a mbox with a few thousand messages in and lots of folders. So far I have lots a mail account twice and left it saying “updating folders” for 3 hours while connected via wifi.
Webis mail is an improvement, but still not great. My main issue with imap is the inability to set a specific imap root folder. My mail is served from my linux box at home, and there is stuff other than mail in my user directory - I dont want it finding all this stuff (at all!) Yeah, I know you can tell it to sync only specific folders, but initially it tries to sync the lot. I gave up with imap and use pop3 now. Perhaps push email availability will fix this.
Nigel
@veletron
O2 has a tariff called Data 36 for around £16.50 per month for 36MB and voice calls are on a pay as you go basis (max 25p per minute).
I agree with most item you guys mentioned especially about the phone's ringing late than the actual incoming call. If I carry JJ, on that particular day I would miss most of my calls due to that.
Here is the bug I consider annoying and hopefully they get fixed soon:
1. The Caller ID sent to the BT headset (still number instead of contact name). Have not heard anything yet till now. Dunno until when they're going to fix this.
2. When used in PDA/tablet mode, there is no hardware button for both of the softkeys that are being introduced in WM5. Pretty annoying. Other hardware buttons on the side are mostly dedicated buttons. I have to sacrifice the record button and assign it to click the OK.
3. If you have not found this one out yet. please try it with your JJ/Universal. With a SD card inside the slot, use one finger, pull it out by moving the edge slowly (without pushing it in to release it). The SD card will come out!
I was pretty :`( with this, but when the SD card inside the slot, even I shake the JJ it will not come out. At least we have to be extra careful with this.
jah said:
@veletron
O2 has a tariff called Data 36 for around £16.50 per month for 36MB and voice calls are on a pay as you go basis (max 25p per minute).
Click to expand...
Click to collapse
Exactly... 36Mb is pretty poor, A few hours of streaming monkey radio, some GRIB files, email and web pages etc.. and I am stuffed....
I have had to jump through hoops just to get something half decent. I ended up with a 400MB a month add on but only after I signed up on a business tariff as a sole trader.
The guys at expansys were selling the JJ with an orange all you can eat (1GB per month) data card sim in it. While he told me voice calls would work he could not confirm that that would always be the case, when I spoke with orange they told me it would never work.
For me the most annoying thing is that the Jasjar in about 20% of the cases freezes upon arrival of a new SMS. You know this makes the thing so very unreliable. You never know when the unit has froozen and find out only when you need to use the unit again. Then you start wondering that don't know how many people tried to contact you while the Jasjar was lying frozen, unnoticed.
Kind Regards
I have no complaints at all, i have it exactly as i want it, now Lakeridge have sorted the screen switch time to be instant on wisbar i am happy, I have the following installed
Wisbar Advance 2 (newest release)
Pocket Informant (newest WM5 Release)
Pocket Breeze
Dinarsoft HandyMenu & Launcher & Switcher
Expea2 Theme
Blank Black Wallpaper
The Show and Hide Bottom Bar App (Assigned to a custom Wisbar Icon)
PSShutxp
FlexWallet 2006
CodeWallet Pro 5
Resco Keyboard Pro 4.34
Resco Explorer 2005 v5.20
I have 27.74MB Storage & 17.77MB Program Memory Free
It has taken 5 Hard resets, and much hair pulling and waiting for new releases, but my JasJar is now stable as hell!
Now if only someone could figure out how to display animated gifs as caller ID's i would be as happy as a P.I.S!!!! at last
Richard
jah said:
@veletron
O2 has a tariff called Data 36 for around £16.50 per month for 36MB and voice calls are on a pay as you go basis (max 25p per minute).
Click to expand...
Click to collapse
Aye, I am aware of this. I was gonna go with o2 on data 200 originally, but they buggered up my order, charged me for the device but never sent it, performed a total of 15 credit checks, screwed my credit history, and then started sending me final demands for data200 even though the contract had already been cancelled. Took 4 weeks to get credit record straightened out, and £139.99 for xda refunded, and a further 2 weeks to get them to realise that I had returned the sim within the usual 14 days.
Ruddy Nightmare, after that I dont consider any O2 products to be worth a mention!! I am a long time contract customer, and they were not even interested in keeping the business by way of money off sweetners!
Besides.... 40MB+200 anynet mins still costs much much more on O2 than on t-mobile ;-)
Nigel
My Universal is losing email accounts. I think memory is not safe in WM5!
See
http://forum.xda-developers.com/viewtopic.php?p=202617&highlight=mail+accounts#202617
Have seen much of that discussed above on my new T-Mobile MDA Pro, however in addition to the overly long call delay, with extremely heavy use over the past month I have observed the following two rather disconcerting "critical" bugs:
- occasionally, the GSM system loses the network despite the network being present and displays a "no service" exclaimation mark next to the service twig. No problem here, except that it does not recover from this state even if the network comes back, or if the location (ie. cell) is changed. For example, this happened in central London today, and after 4 hours of monitoring, it was still lost to the world...
- very occasionally, I've seen my little green service light flashing happily with the clamshell closed, appearing to indicate all was well. However, upon powering up the MDA Pro, I've discovered it had crashed, requiring a reset.
This is serious, because in both cases, my MDA Pro had irrecoverably gone out of network service for a considerable time, during which time any incoming calls had been lost.
In short, I cannot depend upon this device for voice, although I'm happy to live with these issues for data only. So it's a mini laptop... and I still have to get/carry another phone and SIM.
Bosseye
Have seen much of that discussed above on my new T-Mobile MDA Pro, however in addition to the overly long call delay, with extremely heavy use over the past month I have observed the following two rather disconcerting "critical" bugs:
- occasionally, the GSM system loses the network despite the network being present and displays a "no service" exclaimation mark next to the service twig. No problem here, except that it does not recover from this state even if the network comes back, or if the location (ie. cell) is changed. For example, this happened in central London today, and after 4 hours of monitoring, it was still lost to the world...
- very occasionally, I've seen my little green service light flashing happily with the clamshell closed, appearing to indicate all was well. However, upon powering up the MDA Pro, I've discovered it had crashed, requiring a reset.
This is serious, because in both cases, my MDA Pro had irrecoverably gone out of network service for a considerable time, during which time any incoming calls had been lost.
In short, I cannot depend upon this device for voice, although I'm happy to live with these issues for data only. So it's a mini laptop... and I still have to get/carry another phone and SIM.
Bosseye
bosseye said:
This is serious, because in both cases, my MDA Pro had irrecoverably gone out of network service for a considerable time, during which time any incoming calls had been lost.
In short, I cannot depend upon this device for voice, although I'm happy to live with these issues for data only. So it's a mini laptop... and I still have to get/carry another phone and SIM.
Bosseye
Click to expand...
Click to collapse
Agree, the Universal is not really a phone its is a PDA/mini tablet. There are lots of people, however, here and at Howard Forums who think the Universal is as good as SE/Nokia phones.
When I had my first Vodafone was about 15 pages long. Hundreds of GPRS/UMTS connections and disconnections. Does not sound right to me! Sure is something funny with the JasJar radio.
bosseye said:
- occasionally, the GSM system loses the network despite the network being present and displays a "no service" exclaimation mark next to the service twig.
Click to expand...
Click to collapse
Hi
I have seen this also, hopefully a future radio revision will sort it out. I have noticed that even with this (!) mark, the phone *IS* still in service. Some 3rd party progs dont check for a network connection before they try and send data, these still work even with the (!) WiFi is disabled so its not that. I see the same also with wifi, it says 'connecting' but it is in fact connected!!
Basically, the built in stuff is using an API to query the phone about its connection state, and its getting back a 'false'. Stuff that does not bother to query does not get the 'false' and thus works.
Its a pain in the @rse, I think that the display icon displays its state based on the same API call, so perhaps the whole lot is linked together. The status of the device is not being updated correctly.
Oh... it will also ring at times when it is displaying the (!)...
All supposition of course!
Mine will usually come back, if it does not then switching from auto to gsm or umts and then back kicks it into gear. I.e a soft reset is not usually required.
Mine is an MDA Pro flashed with the O2 original ROM.
Nigel
On my O2 Exec, I find that the backlight often isn't working when I switch it on. I have to go into the Settings, select Backlight, and then uncheck and recheck one of the settings there.
I had the same problem with the Ipaq I used to have, although it seemed to happen less regularly.
Calendar\Task alarms dissapear, no Notification with Alarm
the WM "Notification Que" Issue
After 3 weeks of usage of my Qtek9000:
- all the Calendar notifications dissapeared (no text, no sound);
- the Alarms did have sound and vibra, but no text and Notification softbutton on the screen;
- alarms sounds could appear on their selfs on a random time and no Text on the screen.
I've searched the forum and it learned out that it is a Notification Que Issue.
It looks that upon a time, that que is being oversized or some mess (duplicates?) happened in it.
So, after that the "Notification Que" Issue appears.
cross-posted: http://forum.xda-developers.com/viewtopic.php?p=236733#236733
After trying to use my XDA Exec as my main device I had to finally just use it for PIM, eBooks & web (with Opera) and I used a Moto v3X as my main mobile/cell phone as the call quality of the Exec is poor relative to other standard 3G phones and I don't like the delay in altering you to an incoming call. But even as a eBook reader mini tablet I suffered because of the poor battery life and the need to reboot every two days. So I have now gone back to using my Nokia 9500 and I feel so much less stress now! I can't wait for the 3G Nokia Communicator.
Anyone got a fix for this?
lost wifi wep keys every time i soft reset? - keep on having to eneter the bloody wep key!!!!
Hi All,
I am using O2 XDA Exec. here is the system info:
ROM Version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
Protocol version 42.37.P8
ExtROM version: 1.13.188 WWE
Since my last ROM update from O2 the machine is extremely fast. I got of O2 and installed corporate one and never looked back. I laways have 28MB program and 28MB storage and no hacks involved. I have 512 MB SD card (getting smaller need bigger one).
Incoming calls: always answers the after the first ring.
pressing the phone button brings the dialer up in a split second.
I have buletooh car kit and always connect with my Exec for at least 1 hour at a time twice day without dropping a single connection ever.
WiFi extremly robust and never had problem connecting to mine or a paid one and it is beautiful used with SKYPE to make cheap phoen calls abroad.
I hardly need to reset the machine unless an application behaves badly. I just dont install unnecessary applications, or pretty ones (it is a matter of taste this one)
There is no proper close for application, it would be nice but hardly an issue to me (only a couple of taps away), actually some application I want them running.
Never had problems with call connections, and I travel between London and Swindon everyday.
As for Battery, when not using the display I switch it off (I can still get calls).
I leave a USB cable at work for recharging and a a car charger in the car. I also bought a spare battery. I am never out of battery (ofr my kind of usage).
All applications are standard and I use them heavily, appointments, alarms, contacts (2550 names of all the company employees), emails, word, and especially presentation (power point) and they do the job adequately.
I donwloaded and tried (with intention to buy) many application that might replace the standard ones but I always unable to justify spending the money as they don't do anything special (prettier maybe).
the only application I have is
WiFiFoFum for scanning wireless networks.
SBP GPRS Monitor (O2 gives me 100K a month free - wehehehe)
Adobe Reader 2.0
Microsoft Reader
PocketTV
CodeWallet Pro 5.0
Inesoft Cash organizer 05 Premium
Skookum for RSS news
and of course SKYPE 2.0
and with mobile google and a list of mobile websites in my Internet Explorer favourites and skookum I can get all the news and info that I need.
What I don't like;
no front screen to see who is calling without opening the device (this would have been a killer to me).
A-GPS or even a full blown GPS would have been very nice indeed.
I bought themachine 4 months ago from O2 high street; now hwyI don' thave these bugs people talk about, is there different versions of bad batches? I am not the only one I met quite few people who also get surprised when we read the bugs. Strange; could it be the way people use the device?
Thanks
SO MANY PROBLEMS......BUT MY MAIN ONES ARE
PHONE DROPPING CALLS WHEN DRIVING..UPGRADED TO LASTEST ROM STILL DOING IT ........I REALLY WISH I COULD FIX THIS...DOES ANY ONE ELSE HAVE THIS PROBLEM?
CASE MARKS...
STUTTERING RING TONES
ANSWER DELAYS
I THINK HTC SHOULD DO THE RIGHT THING AND RECALL THE LOT OF THEM MY OLD XDA 2 WAS A GREAT PHONE....THIS IS A PIECE OF CRAP.
I bought an 8525 a couple of days ago and have been playing around with it. The 8525 has replaced my 8125, which I loved dearly...
I have noticed 3 major bugs in the device :
1) The 8525 does not indicate when you are using edge by the "E" icon. It simply has the "G" while producing edge speed.
2) The non-3G internet connection is terrible. It times-out quite often. For instance, when I try to check my email using pocket outlook it sometimes takes forever.. or when i am trying to access a website, it says locating for about 1-2 minutes before actually opening it up. When the internet is working without the those time-outs and lags, it works great (better then the 8125 in non-3G areas).
3) Pressing the power button (when the devices screen is off to save battery life) has a weird 2-3 second delay. This never happened with the 8125...
Here is my Device info:
Rom version : 1.34.502.1
Rom date : 9/21/06
Radio Version : 1.16.00.00
Protocol version : 32.53.7018.01H
The main reason I am posting this is to find out if I am the ONLY one experiencing these problems, if so, I am going to do a warranty exchange swap. If anybody has any suggestions or comments please share it here..
blkwrxwagon04 said:
I bought an 8525 a couple of days ago and have been playing around with it. The 8525 has replaced my 8125, which I loved dearly...
I have noticed 3 major bugs in the device :
1) The 8525 does not indicate when you are using edge by the "E" icon. It simply has the "G" while producing edge speed.
2) The non-3G internet connection is terrible. It times-out quite often. For instance, when I try to check my email using pocket outlook it sometimes takes forever.. or when i am trying to access a website, it says locating for about 1-2 minutes before actually opening it up. When the internet is working without the those time-outs and lags, it works great (better then the 8125 in non-3G areas).
3) Pressing the power button (when the devices screen is off to save battery life) has a weird 2-3 second delay. This never happened with the 8125...
Here is my Device info:
Rom version : 1.34.502.1
Rom date : 9/21/06
Radio Version : 1.16.00.00
Protocol version : 32.53.7018.01H
The main reason I am posting this is to find out if I am the ONLY one experiencing these problems, if so, I am going to do a warranty exchange swap. If anybody has any suggestions or comments please share it here..
Click to expand...
Click to collapse
Yes you're the only one with these problems. I don't know how they had the nerve to sell you it. I have searched the threads and posts here and let me see.... no ... nobody's had anything like this.
I'd take it back!
Edit: OMG look what I just stumbled on! Stop the presses perhaps not MAJOR bugs but still bugs of mass destruction!
http://forum.xda-developers.com/showthread.php?t=280383
Mike
blkwrxwagon04 said:
I bought an 8525 a couple of days ago and have been playing around with it. The 8525 has replaced my 8125, which I loved dearly...
I have noticed 3 major bugs in the device :
1) The 8525 does not indicate when you are using edge by the "E" icon. It simply has the "G" while producing edge speed.
2) The non-3G internet connection is terrible. It times-out quite often. For instance, when I try to check my email using pocket outlook it sometimes takes forever.. or when i am trying to access a website, it says locating for about 1-2 minutes before actually opening it up. When the internet is working without the those time-outs and lags, it works great (better then the 8125 in non-3G areas).
3) Pressing the power button (when the devices screen is off to save battery life) has a weird 2-3 second delay. This never happened with the 8125...
Here is my Device info:
Rom version : 1.34.502.1
Rom date : 9/21/06
Radio Version : 1.16.00.00
Protocol version : 32.53.7018.01H
The main reason I am posting this is to find out if I am the ONLY one experiencing these problems, if so, I am going to do a warranty exchange swap. If anybody has any suggestions or comments please share it here..
Click to expand...
Click to collapse
Here is my experience so far:
1) I have yet to see an E indicator for Edge. I live in LA and we are still waiting for our 3G deployment so edge is all we get. I do want to point out that on page 25 of the 8525 manual it does not indicate that there is an edge indicator/symbol display specifically for edge.
2)The non-3G connection here in LA has always been spotty at best so I can't really comment on that. I do however notice that I cannot connect to a lot of the streaming content at locations where it was possible with my 3125 just a week ago. Also it take longer to get the streaming playing if it does connects.
3) For me the delay for power up from power save is about 1 second.
I have never used a 8125 before so I have no way of comparing the behavior of the two.
blkwrxwagon04 said:
1) The 8525 does not indicate when you are using edge by the "E" icon. It simply has the "G" while producing edge speed.
Click to expand...
Click to collapse
I can't confirm this because I've not left my excellent 3G signal area yet but from what I understand the current rom doesn't differentiate between GPRS and EDGE.
blkwrxwagon04 said:
3) Pressing the power button (when the devices screen is off to save battery life) has a weird 2-3 second delay. This never happened with the 8125...
Click to expand...
Click to collapse
Mine is a 1 second delay. No DSODs though, so it's no big deal for me.
well....i too just upgraded from the 8125...and i find the edge to be a lil suspect. sometimes i take longer than it should to pull up my email.
as far as the power button....it takes longer to turn it on when the screen is locked than the 8125.
The speed of a EDGE or GPRS connection also depends on the serving cell's current capacity. If there is too much traffic, you won't get the maximum of timeslots and so bandwidth will go down. 3G is not very different regarding this issue, but the most likely capacity bottleneck is the basestation's connection to the core network. Here in Germany a lot of 3G basestations have only 2 MBit/s connections, so two HSDPA-clients can use capacity to the full.
inquisitor said:
The speed of a EDGE or GPRS connection also depends on the serving cell's current capacity. If there is too much traffic, you won't get the maximum of timeslots and so bandwidth will go down. 3G is not very different regarding this issue, but the most likely capacity bottleneck is the basestation's connection to the core network. Here in Germany a lot of 3G basestations have only 2 MBit/s connections, so two HSDPA-clients can use capacity to the full.
Click to expand...
Click to collapse
Yes indeed.
For those looking for some general background to these technologies this bit of research provides good background.
HELSINKI UNIVERSITY OF TECHNOLOGY
DEPARTMENT OF COMPUTER SCIENCE
TIK-109.551
Research Seminar on Telecommunications Business II
POSITIONING EDGE IN THE MOBILE NETWORK EVOLUTION
12.3.2003
Vesala Sami 47278H
Koivu Katja 44217E
http://216.239.59.104/search?q=cach...l's+current+capacity&hl=en&gl=uk&ct=clnk&cd=8
Mike
blkwrxwagon04 said:
I bought an 8525 a couple of days ago and have been playing around with it. The 8525 has replaced my 8125, which I loved dearly...
I have noticed 3 major bugs in the device :
1) The 8525 does not indicate when you are using edge by the "E" icon. It simply has the "G" while producing edge speed.
2) The non-3G internet connection is terrible. It times-out quite often. For instance, when I try to check my email using pocket outlook it sometimes takes forever.. or when i am trying to access a website, it says locating for about 1-2 minutes before actually opening it up. When the internet is working without the those time-outs and lags, it works great (better then the 8125 in non-3G areas).
3) Pressing the power button (when the devices screen is off to save battery life) has a weird 2-3 second delay. This never happened with the 8125...
Here is my Device info:
Rom version : 1.34.502.1
Rom date : 9/21/06
Radio Version : 1.16.00.00
Protocol version : 32.53.7018.01H
The main reason I am posting this is to find out if I am the ONLY one experiencing these problems, if so, I am going to do a warranty exchange swap. If anybody has any suggestions or comments please share it here..
Click to expand...
Click to collapse
1. I have never got a E but I am not to sure if Telstra even has a Edge network.
2. I have never been out of UMTS coverage since I got it so I don't know.
3. It takes about 1 second for mine to start-up.
Everthing working great, but no E for Edge either!
blkwrxwagon04 said:
I bought an 8525 a couple of days ago and have been playing around with it. The 8525 has replaced my 8125, which I loved dearly...
I have noticed 3 major bugs in the device :
1) The 8525 does not indicate when you are using edge by the "E" icon. It simply has the "G" while producing edge speed.
2) The non-3G internet connection is terrible. It times-out quite often. For instance, when I try to check my email using pocket outlook it sometimes takes forever.. or when i am trying to access a website, it says locating for about 1-2 minutes before actually opening it up. When the internet is working without the those time-outs and lags, it works great (better then the 8125 in non-3G areas).
3) Pressing the power button (when the devices screen is off to save battery life) has a weird 2-3 second delay. This never happened with the 8125...
Here is my Device info:
Rom version : 1.34.502.1
Rom date : 9/21/06
Radio Version : 1.16.00.00
Protocol version : 32.53.7018.01H
The main reason I am posting this is to find out if I am the ONLY one experiencing these problems, if so, I am going to do a warranty exchange swap. If anybody has any suggestions or comments please share it here..
Click to expand...
Click to collapse
Just wanted to advise, my 8525 shipped with the exact specifications as yours. I too am not receiving an "E" for Edge transmissions. However, as one of the previous posts suggests, we may never receive an actual "E" up top in our display. Haven't had any of the timeouts you are experiencing either. My email and browsing via GPRS/Edge(Edge if I truly am receiving it) works fine. No timeouts on either e-mail retrieval or browsing at this time. Over 2 days battery life so far between charges. Woohoo! Also, in terms of actually switching from stand-by mode to power up, takes approx. 1 sec. as well. I have not yet been in a UMTS area, so I cannot advise of battery life,performance issues related to that. I'm still loving my device!
What data plan are you using media net or pda connect?
blkwrxwagon04 said:
What data plan are you using media net or pda connect?
Click to expand...
Click to collapse
PDA Connect. I did read somewhere on the web that there is a client for Blackberry Connect, just can't remember where/which website it was.
mikechannon said:
Yes you're the only one with these problems. I don't know how they had the nerve to sell you it. I have searched the threads and posts here and let me see.... no ... nobody's had anything like this.
Mike
Click to expand...
Click to collapse
#2 is definitely a problem...
http://forums.cingular.com/cng/board/message?board.id=cingular&message.id=22955
TheCritic said:
#2 is definitely a problem...
http://forums.cingular.com/cng/board/message?board.id=cingular&message.id=22955
Click to expand...
Click to collapse
Yes your right of course, I was being petty cos these problems are already posted elsewhere. Sorry for being childish.
I have to say though here in Aberdeen Scotland my GPRS connection is super fast, faster than my wifi connection and it's not on 3G due to my ancient sim card (must get a new one). So more to do with coverage/local GPRS conditions I guess. Weird cos until a few days ago it continually timed out with page not found and now works amazingly well. I changed nothing and I do not pay for a data tarriff!! I do of course get charged for bytes downloaded but still lots of folk on o2 like me don't get this unless they have a data contract. Weird.
Mike
For those of you who have connection problems, try switching to the isp.cingular AP (requires the PDA Connect plan). I had all sorts of difficulties when using the default wap.cingular AP, but the ISP one works fine...
jeffreycentex said:
For those of you who have connection problems, try switching to the isp.cingular AP (requires the PDA Connect plan). I had all sorts of difficulties when using the default wap.cingular AP, but the ISP one works fine...
Click to expand...
Click to collapse
(boohoo)But I don't wanna pay $25 more a month... (/boohoo)
I'm thinking about it, I just want to know for sure it'll fix these problems because I probably can't go back if it doesn't...
Is it possible to test the isp.cingular settings (and get charged) before switching, or do they not work at all without PDA connect on my account?
Just as a headsup to everyone who got the 8525 from Cingular, one of the things I was able to find out is the "G" in this case, also stands for Edge, I also believe it may or may not be in the documentation but have not been able to confirm that yet, so in this case:
"G" - GPRS, GSM and EDGE
"U" - UMTS and HSDPA
Please take this with a grain of salt.
JB
Can anyone explain the difference between the "wap.cingular" and the "isp.cingular" configurations and the step necessary to make the adjustments?
Also, I have been having some weird connectivity issues where my cingular signal become unstable when switching the Wifi radio on and off. The only way to recover is to soft reset the 8525.
I live in metro Philadelphia and have tested this both in the city and the surrounding suburbs.
Thanks!
blueshockey69 said:
Just as a headsup to everyone who got the 8525 from Cingular, one of the things I was able to find out is the "G" in this case, also stands for Edge, I also believe it may or may not be in the documentation but have not been able to confirm that yet, so in this case:
"G" - GPRS, GSM and EDGE
"U" - UMTS and HSDPA
Please take this with a grain of salt.
JB
Click to expand...
Click to collapse
I've got an 8125 and an 8525 side by side in the same room, and the 8125 has an E, and the 8525 says G. Now, the documentation I have clearly distinguishes between the two. "Status Indicators" on the last page of the "Getting Started Guide."
I am using mediaNET on both.
This is a little annoying, but honestly, the speed is the same. Unless someone can confirm that this is causing lower speeds to be rejected, it's just an annoyance that, if I recally from my 2125, can be tweaked in the registry or some other simple tweak.
"Dial up"
Also, I'm having some irregularities using the 8525 as a "modem" for my computer. I have a C2D MacBook Pro, running Mac OS 10.4.8 and Windows XPSP2. With my 8125 I could use "dialup" on the Mac side via BT. On the Windows side, I could use dialup using the USB connection. (And BT in bootcamp)
I also have tested this with a regular plain HP PC laptop.
I have noticed that it doesn't always connect on the first try, whereas the 8125 always did. The connection speed is the same as tested on DSLreports mobile, but I have to say, I find this a little odd that it doesn't always connect.
I am far away from the nearest 3G area, so I won't be able to test it there until my next trip, but, oy....
Anyone else with this problem?
stormj said:
I've got an 8125 and an 8525 side by side in the same room, and the 8125 has an E, and the 8525 says G. Now, the documentation I have clearly distinguishes between the two. "Status Indicators" on the last page of the "Getting Started Guide."
I am using mediaNET on both.
This is a little annoying, but honestly, the speed is the same. Unless someone can confirm that this is causing lower speeds to be rejected, it's just an annoyance that, if I recally from my 2125, can be tweaked in the registry or some other simple tweak.
Click to expand...
Click to collapse
The cingular rom on the 8525 DOES NOT (not yelling) include an E icon, only G and U. When in G you are actually on EDGE, run a speedtest and you will see. Hopefully they will correct this in the future release. And since there is no included E icon there is no reg tweak that will correct this.
Hi,
Got my Hermes (xda trion) very recently. Have noticed a battery performance about as good as that of the Exec.
In fact, had full charge yesterday at 12pm. I now have 30% left (4:50pm). Bluetooth and wireless have been off. Call time: 9 mins exactly. Push email on (fairly good 3G reception). That's all the useage it's had.
Is this what I should be expecting from the Trion or have I got a dud battery??
Thanks in advance,
HPJ
HPJ said:
Hi,
Got my Hermes (xda trion) very recently. Have noticed a battery performance about as good as that of the Exec.
In fact, had full charge yesterday at 12pm. I now have 30% left (4:50pm). Bluetooth and wireless have been off. Call time: 9 mins exactly. Push email on (fairly good 3G reception). That's all the useage it's had.
Is this what I should be expecting from the Trion or have I got a dud battery??
Thanks in advance,
HPJ
Click to expand...
Click to collapse
HPJ,
I too found that my battery ran out of power very quickly - but only when at work during the week. The problem appears to have been caused by the Vario II (Hermes) spending all day jumping back and forward between networks whilst hunting for the best signal - only an issue at work.
I would recommend that you try one of Daniel's applications - he is working on Comm Manager Pro at the moment but I think that Bandswitch will probably help you - it solved my battery life issue completely. Although the Bandswitch application (very small footprint) will not increase the signal you may find that forcing the phone to operate in a particular band helps - this is very easily achieved via the Bandswitch interface rather than going into settings each time. I now regularly switch to GSM each day when I get to work and it has solved my battery run-down issue completely!
Comm Manager Pro does much the same and more. It allows you to define a location (according to Cell ID and LAC Code) from which you can set the CMP application to (amongst other functions) switch to a particular band - or even turn the phone off).
I hope this helps you. I'd just posted this elsewhere on this site and you will find plenty on both Bandswitch (linked) and CMP too.
Immense help, thank you Tony.
So if I understand this right, I have downloaded BandSwitch and run it, and I can now choose at will whether I want to use 3G (UMTS) or normal speed (GSM)? And for the phone to not have to continually decide which to use, I'm saving loads of battery? Simple as that?
I am currently testing, and fingers crossed it has solved the problem.
HPJ
I havent found this to be a problem with my TyTN, walking around Uni all day I get varying areas of GSM and UMTS. Ive quite happily left it uncharged for a few days and still been left with around 25% charge remaining. The two main causes of battery drain i have noticed (as a trend in threads requesting help over the last year) have been the radio version and sometimes 3rd party apps.
What is your radio version??
also what apps have you installed?? (include the O2 crap)
Hi Mr Vanx, and thanks for taking a look.
The only apps I have are PocketTv (not even used yet), Kevtris (game), Sprite Backup (from O2, and Adobe reader (also from o2). Thats it.
The details of the phone are:
ROM version: 2.15.206.1
ROM date: 03/23/07
Radion version: 1.38.00.00
Protocol version: 32.71.7020.12H
ExtROM version: 2.15.206.101
Thanks for any help you can give.
Battery performance is terrible
I have tried upgrading my Tytn from WM5 to WM6, WM6 Black 2.5 and now on Black 3. The battery perfomance seems to be getting steadily worse.
If I leave it on my desk in a great 3G area on standby with just push email running (no wireless, bluetooth or anything else), I get about 6 hours sometimes 7. I don;t use it to make phone calls (I'm deaf) although I get the occasional text.
What's up with that? It doesn't even last a working day. Any suggestions?
ROM Version: Pro Black 3.0
ROM Date: 01/04/07
Radio Version: 1.41.00.10
Protocol Version: 32.74.7020.18H
superchimp said:
I have tried upgrading my Tytn from WM5 to WM6, WM6 Black 2.5 and now on Black 3. The battery perfomance seems to be getting steadily worse.
If I leave it on my desk in a great 3G area on standby with just push email running (no wireless, bluetooth or anything else), I get about 6 hours sometimes 7. I don;t use it to make phone calls (I'm deaf) although I get the occasional text.
What's up with that? It doesn't even last a working day. Any suggestions?
ROM Version: Pro Black 3.0
ROM Date: 01/04/07
Radio Version: 1.41.00.10
Protocol Version: 32.74.7020.18H
Click to expand...
Click to collapse
The common factor with your case and the one above is Pushmail. There are a few things to consider here and they are outlined in the links that follow. In summary some folks find with Pushmail enabled the battery drains very fast, others notice little effect. So it may be a combination of things you may need to look at:
First to confirm it's pushmail causing the problem - you could run a test day with it not running.
How often is pushmail activated (reduce frequency)
Should you set to use GSM only - uses less battery
Do you get several e-mails large size etc etc
Is your device activating - though possibly not using wifi when pushmail is activated?
http://forum.xda-developers.com/showthread.php?t=269840
http://forum.xda-developers.com/showthread.php?t=274695
Mike
Hello,
I have just upgraded to the official GPS ROM and I am on the Swedish 3 operator. I have noticed since the upgrade that the network connection is switching from 3G to HSDPA when there is a demand of bandwidth or simply when there is data in either direction.
I can see that the purpose of this was to make it possible and more reliable to place and receive calls during data sessions. I have figured out though, that with the old ROM, there was no such switching (but there was no distinction with the icon, so you really had no idea) and the connection speed was always constantly 1Mbits/s when using Internet Sharing for example. Now with the HSDPA/3G switching/throttling, the connection often drops down to 3G speeds and Skype-calls are lacking quality from this a bit when using Skype in the car which i do quite regularly nowadays using my Jabra JX-10 headset.
I also realize that there is still a problem with outgoing and incoming calls during these automaticly switched-on HSDPA-sessions. That is probably why HTC has decided to keep the HSDPA sessions as short as possible, that's fine, but what boggles me is the algorithm used for the switching. It seems to always kick in HSDPA in the beginning of a new data session, and after a short time of inactivity (while pondering what favourite page to open this time) the connection drops down to 3G and it won't kick back to HSDPA even when you start browsing again, until a certain period of "non-HSDPA-ratio" has been reached and the phone thinks it would be OK to kick in the highspeed again for a little while.
I also noticed that using Skype would keep HSDPA alive once you place a call from a fresh started data session and keep talking ;-)
This is not a particular problem to me, I was just wondering of anyone else here has noticed and had an idea of what the programmers had in mind?
BTW: I am running TomTom 6.010 and Franson GpsGate on the machine now and it works absolutely like a dream. I used to have a Blue-I Bluetooth GPS in the car (Trimble based chipset, only 8 channels but quite OK piece of hardware) but this is far superior when it comes to HOLDING a persistent fix also when moving indoors. The TTFF is quite fast as long as you are outdoors, most of the time i have a fix before i leave the parking space. I noticed there being a dynamic number of satellites of the receiver, sometimes i see 7 out of 8 satellites, and then sometimes i see 10 out of 12! Anyone noticed?
Thanks in advance! Cheers...
It’s not your phone that decide to change from HSDPA mode to normal R99 (384kbits) mode and vice versa. Everything are always controlled by the network. The behaviors that you describe are normal. Besides the HSDPA is quit new for the operators and new parameters needs to be tuned for best performance for every users.
BTW, the degradation that you notice. You are not alone that use HSDPA.... Its finally the big success for 3G
I use Phone Alarm profiles and BandSwitch to control my connection based on business hours. I get a poor singal unless on 3G where my office is located. I force it to GPRS otherwise to save battery.
I have similar problems, cannot receive or start calls when HSDPA connected. Shouldn't that be possible anyway, calling and transferring data at the same time? Or is this a network provider problem?
I too am on the Swedish operator 3. I have an unlocked, non-operator distributed HTC TyTN that I had updated the radio to 1.40xxx and the ROM to Black Dymond 3.5 and was having the exact same problem. I could reproduce the incoming call not getting through error every single time I got the phone to go into HSDPA mode.
After some initial searching I read somewhere it was network dependent (Nokia switches vs Ericsson) and the only way to solve it was to disable the HSDPA using e.g. HTweakC, which I did and it solved the problem, but then of course I couldn't take advantage of the high-speed data access, which was the major reason I got this phone.
I recently noticed that 3 released a new extended ROM with instructions to update the ROM to the latest (as is available on the ftp here) then install their ExtROM. I went to the trouble to try and breakdown what was in this extended ROM, but being a newbie to pocketpc it was all hyroglyphics to me, so I went ahead and installed it over my old HTC ext ROM (which I saved for later use just in case).
When I get around to it I may mount this extended ROM here (I have it, but don't have too much time to put it up right now, so someone may beat me to it).
Anyway, Black Dymond 3.5 didn't install the Extended ROM after a hard reset (assuming that was the intention), so I did it myself afterwards. One initial bug that showed up quickly was the Comm Manager not wanting to start saying it would only manage a max of 7 items (whatever that means). So I installed Schaps latest Comm Manager and it worked fine.
Well, guess what, now there's a daemond that starts on boot and the phone app is different (another bug is that the text on the phone app buttons remain in the 3 theme although I changed back to black, but that's minor), but now I cannot replicate the no incoming calls during HSDPA error.
Apparently they've added something that makes the phone connect properly to their 3G/HSDPA network for call handling. Now I've got full HSDPA speed and no problem on incoming calls (plus still have Black Dymond's great VOIP/SIP WM6 solution).
Ok, as a noob I of course missed the fact that the daemon starting at boot is Voice Commander. Still the actual phone app/dll is somehow different with this ExtROM and it's solved my problems.