Related
Hi
I searched the forums for info, seems that others have had issues trying to connect a VPN session over WiFi. Basically, my wifi (internet) is connected, the 'Connect VPN' option appears in the 'Connectivity' bubble, but tapping 'connect vpn results in the unit trying for a while to connect and then giving up with no error.
Probably yet another XDA bug. My device is the XDA IIs (Blue Angel).
Anyone got a VPN going over wifi?
For the record, it (VPN) works fine over GPRS, although the implementation is shockingly bad. You cant hit boxes on yr lan via IP, it drops the VPN the moment you try. I guess i'll have to set up some hosts file to fool the sack of crap into realising that it needs to head down the VPN to get to said ip.
Nigel
Nigel
Check your ip's, they must be in different subnets at each end of the vpn eg (192.168.1.--- >>>><<<<192.168.0.---). If they are both in the the same range then packets won't be routed correctly.
I use vpn over a wifi lan every day, and it works like a dream (on an xda2 with soket wifi card).
Hi
Yeah, they are in different subnets, still refuses to connect. God knows. The wifi implementation on the Blue Angel is bugged to hell so I suspect this is just another bug.
Nigel
I can get my VPN to connect.
My M2000 is connected to my local lan via wifi (192.168.0.0) and I have set up a VPN to my work lan (172.16.0.0).
The vpn connects and shows as connected in the connection dialog bubble.
However, I can't see/ping anything on my work network.
The PPTP NDISWAN Miniport adapter shows as not connected.
Using xvIpconfig i can see that there are two active adapters.
One is my wifi card...all ok there.
The other is called RAS VPN Line 0.
It seems to have a correct IP address, subnet mask and default gateway for my work network but it says that DHCP is disabled.
Also the adapter address is 00-00-00-00-00-00...that can't be right can it ?
VPN
hi guys, have you made any progress with the vpn and the blue angel. I am having the same problem - VPN appears to connect fine and then drops without any errors etc. to make matters worse i deleted all 02 connections so now i can't even see the vpn connection. Help!!!
yanni
For some reason I can connect to the internet very easily through GPRS (even when roaming), but at home with my own wirelss LAN, I can connect with no problem, but each time I try to access anything on the internet, I get a pop-up stating "Could not locate remote server". I don't have a router, I am using a desktop as the gateway, I am currently accessing the net with my laptop through the same means. All configurations for the LAN appear to be correct, but I must be missing something on the JAMin. In the WiFi settings, I see the LAN, almost full signal - Ad hoc Mode - status is connected - I'm assigned an IP ... seems like everything is in order.
Will one of you wizards point out what I've missed? I know it's probably simple, usually is.
If I'm having trouble connecting a device to a network that has previously been working ok, the first that I do is turn off all network security i.e WEP, MAC address filtering etc. Then reboot the wireless access point/router and your device. If you still can't connect, you can start to blame your device.
Don't think it's a network prob...
Thanks Matterhorn, but my laptop is still connected fine, no problems there... I get the feeling that the PPC's only recognising the GPRS as a valid network for internet access... it works okay when I login to a commercial WiFi network (when I'm in the States) but for some reason on my own network here at home, it logs in, just can't find a server for some reason. The first thing I thought of was the firewall, turned it off and still no luck.
Any other ideas? I thought maybe there was a setting for default AP or connection, but can't find it, nor can I find an appropriate reference in the manual. Ugh!
Resolved!
It would seem my JAMin was trying to access the internet not through the gateway, but through my laptop. As I don't have the laptop setup to share an internet connection, it would allow my JAMin to connect, but that was all. I went in the room where my desktop is, registered on the network there and bingo!
Too simple, should have tried that right away but it didn't occur to me at the time. Thanks for the help anyway Matterhorn!
Hello to all
I have problems trying to connect through wifi on my new 8125.
After reading a lot of threads, i downloaded a program called hitchiker, who solves the wifi connection a lot easier and faster, but i keep getting the same error, the wifi connection appears, it connects but can not solve the ip address with the dhcp server and fails...
Can anyone told me if this is a hardware problem or a firmware issue?
my router is a netgear WG602 v2 with the last firmware available.
Thanks and happy new year to all!!
ddo you have mac filtering on? if so try turning it off
No, i used to have a wep security password, but i reset all settings on the router to factory, to try to connect.
i also have a laptop and a psp and both connect great!!
dont know what the problem is here, but its frustating...
I make it to work
first i did a hard reset, then i check on the log of the access point, and it was going through and forwarding the connection to the adsl router, but the problem apparently was on the dhcp server on the router.
i add a fixed ip, and now it works
still not working on dhcp but at least its working...
tanquef said:
I make it to work
first i did a hard reset, then i check on the log of the access point, and it was going through and forwarding the connection to the adsl router, but the problem apparently was on the dhcp server on the router.
i add a fixed ip, and now it works
still not working on dhcp but at least its working...
Click to expand...
Click to collapse
I'm having almost the same problem.
First I've tried to connect on my open lan in my house. I could connect, but couldn't get an IP automaticaly.
Today I went to the mall to try some open wifi lan. A friend of mine, with a Nokia n80 succsessfully connected with one of the hotspots. I've tried and couldn't get an IP. Suddenly, don't know why, I got connected, but couldn't surf at the web.
Then I realized that the fixed Ip that I've set before was still on. Changing it for dinamic didn't work.
So, I still can't get an IP.
Any Ideas?
Hi All,
I too have a strange WiFi issue. Here goes:
My phone is able to connect to free WiFi stations and the WiFi station at my parent's place. When I try to connect at home, it connects but I am unable to browse.
I previously used WEP encryption and have also tried removing all encryption...but no luck.
Here are my current router settings:
Band 2.4 GHz B+G
Mode AP
Channel 9
Authentication Open
Preamble type Long
Broadcast SSID Disable
Encryption None
Use 802.1x Authentication Disabled
Phone Details
HTC Touch
Browser Netfront/IE
My laptops, DS Lite, Wii can connect and work with the router...
Any help will be highly appreciated
Check that you don't have MAC ADDRESS FILTERING at the router. It may be hidden under Filter settings, like my D-Link is. This may sound trivial, but more than once I forgot about the MAC filtering.
If that doesn't help you, then just to narrow it down, at my home I use WEP and disable SSID broadcast also, and my Touch can connect fine, and fast.
Scratch the last post! I had the same problem with my TOUCH..Just put the power level to the max (i.e. go Start -> Settings -> Connections -> Wireless LAN -> Power Mode -> and slide all the way LEFT to Best Performance) and all hail ..your problem solved
I also use a Touch. I put the slider all the way to the right (Best Battery) and I connect fine. You people must have a big house, or a crap router?
HTC Touch wireless lan connection problems
hi,
Im having the same problem. No MAC filtering & no encryption on ADSL router.
HTC touch can connect to the router at 192.168.1.1. But it does not connect to any other web page.
Message shown is: "Page cannot be found. Check the name and try again."
Any other tips.
Thanks in advance.
dbmayur said:
Hi All,
I too have a strange WiFi issue. Here goes:
My phone is able to connect to free WiFi stations and the WiFi station at my parent's place. When I try to connect at home, it connects but I am unable to browse.
I previously used WEP encryption and have also tried removing all encryption...but no luck.
Here are my current router settings:
Band 2.4 GHz B+G
Mode AP
Channel 9
Authentication Open
Preamble type Long
Broadcast SSID Disable
Encryption None
Use 802.1x Authentication Disabled
Phone Details
HTC Touch
Browser Netfront/IE
My laptops, DS Lite, Wii can connect and work with the router...
Any help will be highly appreciated
Click to expand...
Click to collapse
hencre said:
hi,
Im having the same problem. No MAC filtering & no encryption on ADSL router.
HTC touch can connect to the router at 192.168.1.1. But it does not connect to any other web page.
Message shown is: "Page cannot be found. Check the name and try again."
Any other tips.
Thanks in advance.
Click to expand...
Click to collapse
Same problem I am having now. I can connect now wifi, but get same error.
??????
Wifi Problem!
Hi guys,
I've got a problem and I'm hoping you can help me out..
I've got a HTC TOUCH and when I got it the Wifi connection was working just fine.. I could connect to any WIFI network and Browse the internet.
After a month or two, my phone wouldn't connect to my home wifi network anymore. And neither would it connect to any other wifi networks (I tried!)..
I've been all over the internet trying to figure out what could have happened and if someone else was having these problems to.
I just can't find the answer and I feel like I already tried everything I could think of..
Hope some of you knows what to do..
I'd suggest looking at the Touch forum... I've got no experience of Touch devices, but it may be a Radio ROM issue...
kinda same issue I am facing ! donno
MY HTC TOUCH never connects to NETGEAR WIRELESS ACCESS POINT
but finds LINKSYS routers in a jiffy :O
are Wireless Access Point and.. Wireless routers different
they both emit diff. signals ?
I have the same issue with a TYTN II, can connect to the wireless, but can't open any web pages.
problem with htc & WPA-PSK passkey 25 characters
My htc tilt connects almost everywhere, but i have a problem with wpa-psk at work. The password is from 25 characters, I read some articles what WM cannot handle such length. Maybe it's possible to edit somehow the registry?
I have the same problem guys, what can we do to find a solution i tried everthing i could, and i even tested it out with my 2 wireless routers, and at public places it connects (at home it doesnt connect though).
shirreer said:
Scratch the last post! I had the same problem with my TOUCH..Just put the power level to the max (i.e. go Start -> Settings -> Connections -> Wireless LAN -> Power Mode -> and slide all the way LEFT to Best Performance) and all hail ..your problem solved
Click to expand...
Click to collapse
Thanks a lot!
I had exactly the topic problem with manilla rom on my kaiser, could not use wifi any more. But with just sliding the meter to 'Best Performance' as suggested, wifi it once again works like a charm.
HTC Touch wifi solve
I had the same problem with my htc in WEP it dosen't browse, I changed the router to a better wifi protection like WPA-PSK, connected and worked fine, for some reason it only work's fine for a couple of minutes, I readed this post to put the sidebar in best performance and now everything works fine. An advice don't use WEP it's not secure at all.
http://en.wikipedia.org/wiki/Wireless_security maybe you fine this interesting and helpful.
I'm running into a problem were I can connect to an AP at work and surf the net fine but when I disassociate I cant connect to it again for a whole day. The AP must be saving some info and therefore will wait for the DHCP lease time to finish before allowing the touch to re-connect. I tried my laptop and was able to connect 3-4 times and never have a problem so it is isolated to the touch and windows mobile 6.1. To find some more info out I was able to clone the mac of the touch and use it as the laptops wifi cards mac. It connected fine on 3 consecutive tries.
Maybe windows mobile is missing some commands when disassociating from an AP and as a result leaving info out in nowhere land confusing the router.
Thanks for any help!
ok, here's me joining the club... dunno what happened... working one day, getting crap the next.
exact same problem as everyone else...connects to the wireless network, then when you try to surf, page cannot be found...
Exact same problem here.
In the beginning everything fine. Connecting to my home WiFi and using the internet without problems (weather, stocks, opera, email, google maps, even skype voip).
Then, last month, all programs are unable to find anything on the internet, although the device reports it is connected to my (unchanged) home WiFi.
All these programs work fine when the device is connected to the internet through activesync (usb cable).
Also this whole time I have been using my home WiFi with a laptop from both Vista and Ubuntu, with no problems, so I guess it's not the router.
Also have read in other fora about these wifi working - wifi not working "cycles" other people have had, with various WM devices. And various tricks like shutting wifi off and immediately on again.
I even hard reseted the device. Problem still there.
WTF?
Connected once only
Connected once only for a few minutes to my home router dir 310 D-Link, worked fine and fast. After that I closed the connection. Next day I tried to connect but my HTC Touch 3G doesn't see the router. I see any other routers, but I do not see mine. I connected to some friends routers with WEP and WPA encription just to be sure the phone working. During this I didn't changed the router or the phone settings. It is very strange. The problem maybe comes from the router.
I'm having the same issues with my HD2. Looking all over the place and seems to be a common fault, but thus far with no cure, I tried the power save mode
From new it worked like a dream, but then one day it would connect to AP's but act as if not connected. I flashed my ROM with the VERY impressive Merlion Leo v 2.66 and it all started working again. Then yesterday, it stopped again. I don't want to reflash, so I'm working hard to find a cure, and will report as soon as I find one.
---EDIT---
I've found a cure (for mine at least), not sure if it will work for everyone, and haven't managed to test it at any other AP's except for my home Router, but all I did was set the network card properties (Broadcom 802.11 DHD Network Adapter) to 'Use server-assigned IP address' instead of 'Use specific IP address'. I'm not sure why this worked as there was no IP address conflicts because there were no other devices connected to my router when I had problems, but it works for me, hopefully permanently
Good luck.
Try this. Its work perfect for me!
http://forum.xda-developers.com/showpost.php?p=10035476&postcount=10
I have my Tattoo rooted with 1.6 (can't recall the ROM name) with build number 1.67.405.6. Almost everything works fine except the connection with my home WiFi network. It's a PPPoE connection through ADSL modem. Next in line is the Netgear WG602 v3 WiFi router. At the beginning I couldn't connect at all so I changed the router's ROM to DD-WRT. Now I can connect with the router but no connection to the internet whatsoever. I can ping my router through my Tattoo, I can even open the 192.168.1.1 and mess around with its software but no connection to the internet. It is only limited to my Tattoo as I can connect through my laptop, through my other mobile (HTC S710) and also I can connect my Tattoo with any other WiFi (Secured or Open) with no problems at all.
I tried with no Security, with WEP, with WPA-PSK to no avail. Any other clues?
try running htc mail while you are using your wifi throuf your tattoo it worked for me
What is supposed to happen if I do that? I'm trying it as soon as I get home btw.
Nothing happened
Hi all...sorry for my interference but this problem is similar to mine.
I'm going mad from many weeks trying connect my Huawei Ideos (U8150) to my home wlan through a netgear VG602v3 AP. No way to do this.
Wifi works from my laptop and from my girlfriend's laptop, but from ideos it doesn't.
I turned off all wireless device in my house, I tried with/without WPA, I tried open network from channel #1 to channel #13, tried changing ssid and I also tried praying .
There is a weak wifi near here: it is on channel #1 and its power is between -89 and -82db. My wifi power (data from kismet) is between -50 and -18 db and is configured on channel #11.
In any cases, even if I put my Ideos near to AP antenna the story is ever the same:
- Ideos indentify the wifi network
- Ideos acquire the IP
- I open the browser or the android market and...
- Ideos lose connection...and so on.
I downloaded from work wifi (crypted with WPA) a wifi scanner from app store: it shows me the neighbour's weak wifi and my wifi network which appear and disappear recurrently.
Please, someone helps me (without suggest to buy another AP!!), any suggestions are welcome!!
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
I checked every setting to no avail. I still think somehow that my problem is with my router or adsl modem which doesn't connect automatically with PPPoE and Android doesn't have any command or software to initiate a PPPoE connection.
Other than that... Can't find any solution. Until then, I use connectify on my Win7 laptop. The thing is that I have to keep my laptop switched on as long as I'm in the house.
alpick36 said:
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
Click to expand...
Click to collapse
thank you for suggestion. I looked in depth but I did not found the option of which you were talking about. The unique solution still remains change the AP!!!
WiFi and Netgear Router
I think I finally found the answer. It appears Netgear routers support something called WiFi Multimedia. Its a QOS methodology. I disabled WiFi MM or WIMM as its sometimes called, as well as Internet QOS and all my problems connecting to web pages, the market, etc. through WiFi disappeared.
Strange that older versions of the ROM supported WIMM (or ignored it) and newer ones don't. But that solved the problem for me with no real degradation of performance on any of my other computers.
Good luck.