Hi all!
I have changed the ROM from German version to English version on my miniS, and now I have the next problem. Many buttons on the slide out/in keyboard now won't work as they are described (not only the Z,Y issue but many others as well).
Anyone know of any program to resign/remap/change/ these buttons to work as they should?
Thanks a lot!
Ups, I posted in the wrong place! Some one plz move this topic to the Wizard box.[/i]
I think the author of AEButtonPlus has some apps that might help.
V
AEButtonPlus is not for the Wizard and it is not able to remap the keyboard
You should check AEkmap to remap the keyboard. AEButtonPlus is really for older devices, but AEkmap works perfect with Wizard.
http://ae.inc.ru/aekmap.php
The only thing you need is to make a new layout according to your needs.
cBorisa said:
You should check AEkmap to remap the keyboard. AEButtonPlus is really for older devices, but AEkmap works perfect with Wizard.
http://ae.inc.ru/aekmap.php
The only thing you need is to make a new layout according to your needs.
Click to expand...
Click to collapse
Thanks a lot Borisa!
I'm having a look at the program. Seems not so easy for me since I'm real newbie with these devices (it's my first PPC/PDA device period^^)
PS:I've tried aekmap with the german layout from the other topic with same problems but did not get a good result...
Worked great for me on my Mini S with QWERTZ keyboard...
just go here... http://ae.inc.ru/aekmap.php to get AEKMap
install it and then load the german keyboard map found here... http://ae.inc.ru/aekmaplayout.php
Voila!
Related
Great ROM and it works for me.
How can I change the keyboard layout and swap for example z and y? My MDA III has a German keyboard.
Sorry, I forgot to say that I mean the hardware keyboard
best guess based on details thus far,
Start, Settings, Regional Settings
No, it does not work that way. It must be something like the BA_AZERTY_Hardware_Keyboard_Patch_for_WWE_ROM.cab. The cab works for WM5.
try this
http://forum.xda-developers.com/showthread.php?t=231660
Not sure if WM6 has the same setup but I am sure you will tell us.
it works just fine , tks MDAIIIuser .after changing the value do a softreset.
It works!!!! Thanks a lot for the suggestion
guys on my wm6 herald there is not such an entry in the registry. what to do?
works great!
thx guys!
btw: what about the software keyboard...?
greets.krz
To change the soft keyboard try hades german input pack. Can be found here in the forum.
Best choice for the software keyboard is resco keyboard found on handango.
I am sure you could swap the SIP files but I have no Idea were they are and I have never seen another solution in the BA section.
Hi,
I have a Kaiser (T-Mobile MDA III) with a German keyboard (QWERTZ) layout.
The Kaiser
Since I'm Dutch I changed to ROM to English and changed the keyboard to German layout via Start - Programs - Utilities- Device Config - Advenced Config - Keyboard.
But still when I press the "z" key the "y" is displayed.
What can be done about this?
I'm running L26_WM6 (HTC Kaiser WWE version_3) Kaiser has SPL running.
Is it also possible to switch hardware german keyboard against english one? And if yes where can they be bought?
Thanx
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
klick
double post
well i have the same problem , my device is qwerty and i would like to have the keyboard in azerty
Any solutions für the Screenkeyboard?
shell said:
Any solutions für the Screenkeyboard?
Click to expand...
Click to collapse
TRy Resco Keyboard or PCM Keyboard.
all those available cabs or reg strings doesnt work anymore. I think this issue has been somehow introduced with a newer OS bulit. I do have the same problem with my wizard hardware keyboard....
regards
This is the solution for my German Kaiser running WM6.1 WWE
For this problem on Wizard. http://forum.xda-developers.com/showthread.php?t=290967
Works on my G3 and G4 with WM6 an WM6.1 WWE
MiZi666 said:
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
Click to expand...
Click to collapse
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Artishock said:
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Click to expand...
Click to collapse
you'll find a way out at http://forum.xda-developers.com/showthread.php?t=394857
(read the posts by khals)
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Artishock said:
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Click to expand...
Click to collapse
if so try to install the cab file below...
hopefully this can help you
I am desperately looking for a (working!) method to use another keyboard (like the good cootek touchpal keyboard) on my HTC P3600 (WM5). I tried the software IMSelector as well as SIPChange but it works only a few times!I reboot many times but I always keep the default keyboard...
Can someone help me?
Thanks in advance
I'm not sure about free software but I use SKTools and it get me the correct keyboard all the time.
I've got SKTools !
But how to use it?
Hi,
I have an identical problem with the TouchPad or TouchKeyboard installed on my P3600. I've found that removing some of the object on the Today screen help TouchPad to start. So today, i've only a few items (messaging and SBP Diary) on my Today screen.
I also wait a little bit before entering my pin code for the phone until i see touchpad started (it shows the keyboard for a few seconds).
Since then, i "don't" have so much problems.
Ced
Thanks for your help!
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
I already used it but I had the same problem as the touchpal keyboard
nicus said:
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
Click to expand...
Click to collapse
you say you have p3600 with wm6 !?
I've asked htc to know if there is an upgrade to wm6 and they said NO !
how can upgrade my p3600 to wm6?
I'm french, so i want if it's possible an upgrade in french ...
Thank's for your respons
Alternate SIPs not showing up is a well discussed problem in the Trinity forum, having just reinstalled everything on my own Trinity it seems that it is memory related, once the free RAM is below about half then alternate SIPs tend to be reluctant to work reliably.
Hey guys,
I tried installing a virtual keyboard like the one in the htc diamond from here ->http://forum.xda-developers.com/showthread.php?t=392197&highlight=Gullum+Keyboard
But, it seems to be only for qvga. Any suggestions of where I can get one that might work on the xperia?
theres the ez input on x1.modaco.com that works fine
Hello,
ez Input works on my german xperia but i am not able to use now the special character like äöü.
Have anybody a link for a german version with the character and a german version for the T9 ?
thanks in advance
Daniel
same goes for me
On the keyboard is a button options, there you can chose the language.
Take Touchpad it is in my eyes the best one
pluppi said:
On the keyboard is a button options, there you can chose the language.
Click to expand...
Click to collapse
well that works but it disables the button for the special characters on the hardware keyboard.
so now i can write äüö with the soft kb but i can't with the hardware kb ^^
fards said:
theres the ez input on x1.modaco.com that works fine
Click to expand...
Click to collapse
I tried to find the input but no luck. Any chance you could link???
EDIT: Found it, but I still don't get it at the right resolution....any help IS appreciated
well i installed the BlackStone keybord but after that i couldn't use the special caracter (èòàù) on hardware keyboard..... Any idea?
Hi folks,
for the last few hours I have been trying use AE Keyboard Mapper to adjust a Freedom Universal bluetooth keyboard (German QWERTZ-layout) to my new HTC HD2's (original German ROM) obviously English driver.
Previously, this procedure worked perfectly for the combination of my old HTC Touch Dual and the afore-mentioned keyboard. Unluckily, if I use AE Keyboard Mapper 1.3 to switch, e.g., Y and Z on the HD2 both keys end up dead.
Is there anyone who got AE Keyboard Mapper working on his HTC HD2? Is there another application out there which does the same job?
Thank you in advance!
You need version 1.3.
Also, HTC apparently does something with sense that breaks AEKMap, so you should try changing sip (keyboard software). mine works when I'm using the Eyron (Hebrew\English) sip, but with the HTC sip the leo ignores any press of remapped keys..
Ohg, and don't let the site confuse you - it's still freeware
http://ae.inc.ru/aekmapdownload.php
Nearly forgot, I only ever tested it on 1.61...
Thank you for the quick response! I'm already using version 1.3 so that shouldn't be the problem. But as you described, the HTC Leo simply ignores any remapped key.
Could you please go into more detail relating the Eyron solution? I just visited their consumer website but my Hewbrew is a little rusty... ;-)
Is there some English third-party software to achieve the same thing?
No ill will towards them, but their site isn't much good because they only offer a 7 or 14 week demo of the software itself. I played around with AEK in the meanwhile and it works on Topix 1.1.1 rom (based on 1.61 if I'm not mistaken) with Finger Keyboard, which in itself is one of the finest freeware I ever used.
I suspect HTC circumvented some of the input routines upon which AEKMap relies for injecting the altered keys. Try it with Finger Keyboard 2.1. If it won't work I'd suggest installing a free Arab or Hebrew Lang extender. It just has to be there to make the device "unstreamline" what HTC did.
Thank you for your support! Your hint was exactly what was needed as I installed TouchPal in the meantime and now AE Keyboard Mapper works like a charm!
Has anyone used AE Keyboard Mapper to get the extra/special functions of the igo stowaway keyboard to work?
Hi,
I installed TouchPal and FingerKeyb, incl. the hebrew driver. Still can't get the stowaway keyboard work with AEK. Remapped keys simply are ignored. How exactly did you make it work with either TouchPal or FingerKeyboard?
If I get it working, I will try to remap the complete stowaway keyboard and publish the driver.
Thanks!
which version of Think Outside Keyboard do you have, English Layout?
Hello,
I am trying to make AEKMap work on my HD2 (installed the brand new ROM, 3.14)
I have the same problem as mentionned above: all remapped keys are ignored.
I tried to install FingerKeybore, TouchPal and even NullKeyboard, still doesn't work
Does someone have an other workaround? Is it because of the new ROM?
Also, as Dirty Harry mentions, the layout of the external keyboard is not the same as the HTC keyboard: AZERTY VS QWERTY !
Maybe there is a way to find the config file for the QWERTY and modify it?
Thanks in advance if you have any lead!
sorry i'm late to help you!
i had the same problem.
i found a solution today that is working for me:
i modified a file for my german qwertz freedom universal keyboard 2, then i changed the hd2 sip (softwareinput/screenkeyboard) to anything else, but not the standard-finger-input-softkeyboard from htc, because it seems to cause that mapping problem!
a tip: you still can use a good sip-keyboard parallel in use of the bluetooth keyboard. i use fingerkb instead. totally free and also available in many languages!
and don't forget to modify the aekmap files by yourself to work with your keyboard!
i will attach my keyboard config for the german qwertz freedom universal keyboard 2 (hid-mode) - tested on german windows-mobile 6.5 rom.
known problems: this keys are not working and also not recognized by the aekmapscan.exe:
<>| = opens start-menu - i tried to map this keys but then i can not use the hd2 win-key, because it's writing a "<" when pressing, so i deactivated it!
alt gr is not working (no characters like @€{[]}\~ etc)
fn key is not working (maybe only with the escape-key)
start-key is not working, use the <>| key instead
i hope i could help someone in the future!
downloadlink for aekmap 1.3: http://ae.inc.ru/aekmaplicense.php