Camera problem - JASJAR, XDA Exec, MDA Pro General

OK sorry if this is really dumb or not the right place to post!
The main camera on my XDA Exec displays a blank page, all of the icons are present on screen and all seems to be set right but I get no image from the camera.
Web/Video cam works fine when I switch to that.
I am sure it did work when I first played with it.
The camera function also seems veeeerrryyy slow. Pressing any of the icons or keys does not get response for many seconds in some cases.
I tried a hardware reset and even a ROM upgrade, all to no avail.
Any suggestions or advice would be very welcome.
Thanks in advance
Tim

are you sure nothing is covering ur lens?
can't think of anything else B-)
cheerio!
San

Thanks for that but the lens is clear.

Same Camera Problem
Dear Sir:
I am writing from Brazil. I have the same problem with my Xda Exec Camera.
I tried 3 diferent rom update, and nothing appear, like your.
Do you already found the solution ?
Is a hardware problem ?
Kind Regards,
Carlos Eduardo Pacheco
[email protected]

Mine turned out to be a hardware problem.
My provider O2 replaced the unit no problem.
Tim

Related

Inverted Boot Screen

Hi there.
I have searched (I wish you could limit the function to search topics only) but couldn't find the answer to this although I'm sure it must be addressed someplace.
I've flashed my XDA1 a few times and not really had a problem except for one niggly thing. The Image displayed on reset is upsidedown and flipped vertically. It does this regardless of the image contained within the rom file.
Silly thing, and not a problem as such [?] but I'd like to know why it does this....
Thanks Y'all
Marcus
:wink:
What image do you have in your ROM?
Do you use an original ROM or a cooked ROM.
I think the problem is the image itself. As much as i know, i have 2 or 3 images that haven´t the 100% correct format.....
HTH
Stefan
Hi Stefan.
I have used a few of the images from your Kitchen, ALL of them so far have been inverted and flipped :lol:
Well, it doesn't matter, it must be me luck I guess......
Marcus
It could also be a hardware problem. Did you open your xda before this started to happen, or it received a chock? I do change LCDs between several qteks and this problem does happen sometimes when the larger cable (it is the one for the LCD) is not well installed.
If this is the case, you will have to take off the back cover, look for the larger cable, and carefully lift the lock up form the right hand side (when you hold the xda with antenna up) adjust the cable and lock it back.
If you don’t have enough hand skills, send it to a repair center because this is a delicate process.
No, you don't understand, this is a software issue.
The XDA is working perfectly apart from this small thing :roll:
Sorry mate, hope no harm done
Stefan,
I have the same problem using the picture "Windows Mobile XDA" with "4.01.19 GER T-Mobile".
I have not tried yet another picture, but with previeous roms I've never had this problem.
Michael
qtekmike said:
"Windows Mobile XDA"
Click to expand...
Click to collapse
is one of the files with the "wrong" file format. Maybe anyone will be able to correct this problem.....
Actually i removed this file from the kitchen....
Stefan

Main camera not working

I have O2 xda exec, Its main camera stopped working , camera program starts after a long pause and blank screen appears showing only camera function buttons. I can start the secondary camera from that screen and it works fine. there is no other problem. help needed please.
Camera
Hey there,
I'm having the same camera problem... Did you drop yours? Were you able to fix it?
Thanks ahead,
N
same issue
Meekseeker said:
Hey there,
I'm having the same camera problem... Did you drop yours? Were you able to fix it?
Thanks ahead,
N
Click to expand...
Click to collapse
I just started having this exact same problem when I flashed to jwright's ROM (which is really quite nice). Given the amount of time it takes for the camera to load up, I'm betting this is a permissions problem in the registry and it might be solved by the copy, rename, copy back solution that seems to work for the other things. Anybody know what registry folders have to do with the camera?
Hmmm, now that I think about it. I dropped my camera a few weeks ago and I don't know that I ever checked the camera afterwards. I'm wondering if I wrecked the camera. I just finished putting it back together and the camera looks fine physically but that means nothing really.
Time to poll the board for a new camera part.

HELP with Camera - URGENT

Hi all,
I'm in holydays and having a big problem. The main camera of my 3600 was working great until today.
After I take a few pictures today it crashed and I had to reset the HTC, after I tried to take more pictures but the screen is always with green sticks or green squares.
I already flashed it again the rom that I was using before, and nothing happened, still the same.
Does anyone can help me? Any idea? Thanks in advance.
Cheers from Portugal
Same problem here. Anyone knows how to fix this problem?? Tks!
Send it to repair, I had to do it.
Cheers
i once read something about a camera problem which was solved after taking out the battery of the trinity for e few minutes...
try this...

Could someone plz help me out with my Wizard's camera?

Haya everyone.
I am really lost for a solution here.
My wizard's camera has stopped working properly.
It used to work fine, but since recently everytime I want to use it, the pictures come out all screwed up.
I've attached two samples below.
I tried just about every camera patch there's available, but none of them seem to have any substantial effect.
I also tried different JPG settings, different sizes(that worked a short while) and even different Camera applications like coolcamera..
None of them seem to solve the problem.
Anyone have an idea what the problem could be?
Tnx a bunch, just really annoying I can't even use my wizard for sending mms....
Everything just looks wierd...
plz help me out here....
I've had a very similar problem with my old non-smart phone, I took it in to the service center and it was a hardware problem... I hope I won't disappoint you but if it hasn't happened after a ROM flash, camera software change or something - probably your camera is just broken, anyway you can check that in your local service center too?
ehhh.. it is simple settings prob imo. do full backup and hard reset to be sure.
Noob question
Tnx for your reply..
I don't think it's a hardware issue, since the preview of the camera is good.
I'll try a hard reset, but could anybody tell me how I cab perform a full backup?
Sorry for a noob question...
I use SPB Backup. It has been working fine for me untill now, and you have the chance to restore e. g. only pim.

broken camera kjam

I believe my camera is broken - black screen. I'm not sure but I think it's happened after I upgraded to wm6.
Does anyone had the same problem and was able to fix it or the hardware is ****ed up and there's nothing to do?
Thanks
no....
honestly I don't believe that an upgrade to wm6 can "break" your camera...
... and then there is a simple test that you can try: come back to the original shipped i-mate rom (ftp://ftp.clubimate.com) and you see what happens.
but.... why don't you give us some more infos?
like: is a G3/G4 locked or unloked, IPL/SPL version...
hi
tommy
well, I did that. I restore the original rom and the camera still didn't work.
My phone is G3 locked and I installed on top wm6 from faria (a nice one!).
Of course it could just be that my camera gave up. Since I was not using it regularly and at some point after the upgrade to wm6 I saw the problem it was one of the link.
Can the hardware of the camera be affected by the overclocking?
hey~
i think i may have a similar problem (but the explination doesn't go in to deep detail)
when i try to snap a picture, about half the time it will snap....half the time it just goes black (the screen) and no matter what....it WILL NOT SAVE the photo.
i've tried changing where it saves the photos (main memory or sd card) as well as changed all the settings one by one (megapixels, fine:super fine, snapping type [full press etc] etc. etc. etc. i also tried changing settings via the advance config tool often mention onthe forums)
i haven't updated the rom (stock at&t rom is installed....i'm savy but not savy enuf to change the rom lol) nor have i updated windows (it always gives me an error...says it cant connect to the server or something, oh well i don't much care for micro$ucks anyways lol)
it's running windows 6.1 professional...i have plenty of memory free and hadn't installed anything new or tweaked any settings the day it stoped working....
any ideas?
~j
ps.
oh yeah, oddly...the video record function still works....
Camera might be out of the connecting socket - open your device and make sure it's connected. Failing that - the replacement cameras can be purchased fairly cheaply.
thanks i'll give that a try and let ya know if it works!
i appreciate the very fast reply it's nice to know im not the only insomniac out there lol
~j
Moved since problem is not ROM related.
ubuntujason said:
thanks i'll give that a try and let ya know if it works!
i appreciate the very fast reply it's nice to know im not the only insomniac out there lol
~j
Click to expand...
Click to collapse
Haha, I am 18 hours or so ahead of you.
thank you and sorry i placed my question in the wrong area....where has it been moved to though? :s (while ive been a member her for a while, i am still new to posting...ill admit i usually read...but i hope to change that )
~j
No worries. Let us know when you get it fixed and how.
hey all~
enigma....now i see it's enigmaNZ so new zeeland i assume is where you are....so maybe im a lone insomniac lol
jwzg....thanks again
all....as to the suggestion of opening the phone case....well with my nerve disease i'm going to have to have a friend do that since my hands are often no where near steady...ill let ya all know if that works.
mean time i may also look for maybe some other camera software....like i said, it will snap the photo but it refuses to SAVE the photo....so maybe the software is corrupt who knows....ill try it all
~j
hey all~
so i dove into my system registry tonite....i tweaked some things, changed the localtion of where stuff gets saved, changed some 1's to 0's an vice versa an it now seems to work....hope it remains working!
~j
Must have been a bad camera package.
jwzg~
yeah who knows, i'm just happy it's working again
~j

Categories

Resources