Hi,
I ve installed the new O2 Rom. The first time I execute a exe file i see this popup and i need to accept. This is a problem for me because i am software developer and i ve to deploy the same exe file many times. Any idea?
This a program which should sort out your problem
Just execute it on your pc.
thanks¡¡¡
Related
I just got my XDA II and started installing my software onto it. Noting seems to work! Any software that has more than 1 cab refuses to install, if i look on the device the cab files are there but trying to execute them gives a invalid cab file error - i am installing to SD card, installs to ram seem ok. What am i missing?
maybe your cab files are not for the arm processor?
or not for ppc2003?
it is quite strange for a pocket pc application to have more than 1 cab.
You say they install to ram ok but not to sd card, do the programs work once installed to ram? Many programs have an option when downloading to either have an exe file install or a cab file install, have a look at the sites of the software you are installing to see if that option exists for the programs you are trying to install.
ok, to clarify..Dispite the low number of posts i'm not a newbie - been using and developing for ppc for years...The software all installed ok on my ipaqs(3970 + 5450) both with XScale both with WM2003. I am using activesync 3.7.1, and am leaning towards that being the problem, any thoughts?
you don't need activesync to install cabs. if you copy the CAB to your ppc,
and then click on it in the pocket-file explorer, it should install too.
I'm not trying to install cabs. On my pc i click the install program. That launches add/remove programs in activesync, that copies over the cab files to the ppc which are then executed. If install fails they are not removed. that is how i know they are there.
What programs are you trying to install?
based on a post at pocketpcthoughts in august 2003 i changed my todat theme back to windows default - and guess what - no more install problems! no more directory corruption- should i return my device?
Hi Everybody. I have now a problem. I've upgraded my OS with the Diamond 1.2 version,but now I am missing the ActiveSync software in the device. Anybody knows why? Is it a especially cab file in the ExtROM that may I forget? I don't think so. Any ideas will be greatful. Thank to all.
do you have an exe file in your \windows dir called repllog.exe ?
if you do then it's still there
the shortcut in programs called activesync is pointing at that exe
with a switch /remote after it
Yes I have.
But when I start this exe file,it only pop-ups the message that AS is connecting and closes after while. No MSAsync program is launched. Anyway the PC AS connection works good but I need this PPC software to use via BT.
whats what i ment when i said it had to be run with /remote after it
as in you making a shortcut to it and adding /remote after the exe in the target also put a space between the exe and /remote
i had a similar problem on my xda2, to get around it i had to run the
async.asy
file, which you'll find in your \windows dir on the device
Thanx.
Now I have created the shortcut.
Hello
I was trying to install tcmp4 on an XDA IIi, i downloaded tcmp4 onto the storage stick of XDA IIi, and clicked on the tcmp4, i get the message
'tcmp4' is not a valid Pocket PC application
i am sure i downloaded tcmp4 onto my XDA Exec in a similar way.
can you guys help me?
hello again
i figured out what to do, rather i remembered what i had done with my xda exec.
it is just the same procedure, get the cabinst file, and use it to install the cab file for the arm version
dear XDA_Guy
installing any application in Pocket PC can be either
1) exeutable file : which extention is .exe
these files (mostly and I say mostly) installable via the PC using ActiveSync program installed.
2) .cab file and these file shall be copied directly to the pocket PC and installed by clicking on them
Most program supplier (or programmers) produced the 2 vesrion of there programs i.e. in Cab and Exe format
the good thing with the cab version that you can keep in the SD card and everytime your hard-reset ( or format ) your XDA your can easly restore the programs from the SD (cab file ) without a computer.
IMPORTANT NOTE : about cab file ... most pocket pc or Windows CE deletes the cab file automatically after installing them.
to prevent this you need to install other cab installation utility / program.
personally I use the attached program. its exe file but just copy it and place it in your my documents or any other location . ( this is exe file but its a pocket pc exe file not PC )
dear XDA_Guy
installing any application in Pocket PC can be either
1) exeutable file : which extention is .exe
these files (mostly and I say mostly) installable via the PC using ActiveSync program installed.
2) .cab file and these file shall be copied directly to the pocket PC and installed by clicking on them
Most program supplier (or programmers) produced the 2 vesrion of there programs i.e. in Cab and Exe format
the good thing with the cab version that you can keep in the SD card and everytime your hard-reset ( or format ) your XDA your can easly restore the programs from the SD (cab file ) without a computer.
IMPORTANT NOTE : about cab file ... most pocket pc or Windows CE deletes the cab file automatically after installing them.
to prevent this you need to install other cab installation utility / program.
personally I use the attached program. its exe file but just copy it and place it in your my documents or any other location . ( this is exe file but its a pocket pc exe file not PC )
thanks for the reply nasoor
you mean that the cab file version are meant to be installed on sd cards
and the exe version is meant to be installed on the device itself by clicking on the exe while the exe is on the pc?
how do i use the active sync program to install an .exe file? i copied the .exe file to my sd card and accessed it through activesync(explorer) however by only clicking on the file, it only gives me the properties
yes ,
the cab files should be copied either to you SD card or to the Pocket PC using the activesync explorer.
the EXE file should be run directly from the PC not the XDA. the steps are :
1- Put your XDA in the cardle ( holder) which is connected to the USB.
2- wait for the syncronization process to finish
3- go to the EXE file for TCPMP program in your Desktop Computer
4- Run the file and follow the instructions to be installed
5- after finishing you will see your XDA doing some progress and copying
6- You are done enjoy
regarding the cabinstall_en.exe file for cab installation , even this file is an exe file but as I told you before you can just copy it to your SD card and run in the Pocket PC not the Desktop because this is a Mobile EXE file.
I hope you are fine now ..
thanks for the reply nasoor
is there any way to know if a a file is a mobile exe file or is a pc exe file?
actually , without a programmed tool or external tool you can not
I mean , the only way - as I think - is by try executing the file , if the file fails to run with an error messaage says ' The file is not a valid 32 bit application ' then it means that this is for Pocket PC
otherwise , it will run , then it should be ment for the Desktop or Windows XP /ME application
thanks for the reply nasoor
pocket pc's are 32 bit applications?
Hello all,
I'm having a problem with my qtek 9000 with latest rom from myqtek.com, some programs can't be opened because they say: "The file "patched-game-file-here" cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found. You might need to reinstall or restore this file"
I've tried some files to disable certificate security but no luck, the problem is still there :|
Anyone can help getting over this problem?
Try this.
http://buzzdev.net/index.php?option=com_remository&Itemid=109&func=fileinfo&id=194
This is from the wiki:
Code:
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Security\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
V
Hello all, tks for your help
vijay555 - i tested your code but no luck, problem still there.
victoradjei - i've tested that app, pretty simple to use an finally it works ! (YES TK U) , for now it's a solution let's hope someone can make a .cab in order to disable this security check for good.
Hi,
I have an htc P3600.
I've downloaded the application for buzddev.
I've also changed the registery but I do not know what to do with that application. There is the signcode.exe, what should I do with that file downloaded?
Could someone shed some light on how to use the app from Buzzdev? Is it supposed to be run on the device?
I ran the EXE file on my PC and a DOS window popped up and closed itself and nothing happened.
Thank you in advance!
Extract the SignCode files into a folder. Then you have to run it from the command line or the "Run" option from the "Start" button and tell it what EXE file to fix. Since this program actually changes the executable file by changing the embedded security certificate, you might want to make a backup copy of the EXE file first.
Here's the syntax:
<path to SignCode files>sign.bat <path to program and filename>
If you extracted the signcode files to your "C:\Program Files\SignCode" folder and are trying to fix your "C:\Program Files\SomeGame\SomeGame.exe" file, here's EXACTLY (quotes and all) what you would type in the "Start" "Run" box or a command prompt:
Code:
"C:\Program Files\SignCode\Sign.bat" "C:\Program Files\SomeGame\SomeGame.exe"
You should notice the timestamp of the file change indicating that the embedded security certificate was changed. Copy the updated file and overwrite the original EXE file on your mobile device and then try running it. This will still pop up an "Untrusted Source" type of security message on your mobile device but you will have the option to install it anyway and it will work fine after that.
This should work too, M$ made a tool for provisioning devices.
http://www.microsoft.com/downloads/...8c-d587-47e0-908b-09fee6ea517a&displaylang=en
victoradjei methode worked perfectly for me on WM6
Does anyone have the info that was in this link?
The forum is their but looks like the link is dead.
http://buzzdev.net/index.php?option=com_remository&Itemid=109&func=fileinfo&id=194
Thanks,
Kenny
I dont know, but could try attached may help. I don't know anything else to help... hopefully someone else will.
I download the qtek rom
RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship, however this is
not a setup file like JAmin. it is an EXE file and when i click on it a Dos pop up
is openedthen closed again, anyone has an idea about it?
If you download the ROM from this folder ftp://ftp.xda-developers.com/Prophet/Shipped_Complete_Updates/ , the file is corrupted.
The one in the Upload/Prophet folder is not. The link is: ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe .
bambacik;
I successfully download the file maybe three four times but after I am not able to work this file , when I click on the file a DOS screen open and closed then nothing happene
NO BODY HAVE ANY IDEA ABOUT THIS PROBLEM, IT IS INTERESTIN BUT I CANT INSTALL THE ROM TO THE S200, THE EXE FILE DONT WORK LIKE JAMIN'S ROM ????