Hi Everybody. I have now a problem. I've upgraded my OS with the Diamond 1.2 version,but now I am missing the ActiveSync software in the device. Anybody knows why? Is it a especially cab file in the ExtROM that may I forget? I don't think so. Any ideas will be greatful. Thank to all.
do you have an exe file in your \windows dir called repllog.exe ?
if you do then it's still there
the shortcut in programs called activesync is pointing at that exe
with a switch /remote after it
Yes I have.
But when I start this exe file,it only pop-ups the message that AS is connecting and closes after while. No MSAsync program is launched. Anyway the PC AS connection works good but I need this PPC software to use via BT.
whats what i ment when i said it had to be run with /remote after it
as in you making a shortcut to it and adding /remote after the exe in the target also put a space between the exe and /remote
i had a similar problem on my xda2, to get around it i had to run the
async.asy
file, which you'll find in your \windows dir on the device
Thanx.
Now I have created the shortcut.
Related
I just got my XDA II and started installing my software onto it. Noting seems to work! Any software that has more than 1 cab refuses to install, if i look on the device the cab files are there but trying to execute them gives a invalid cab file error - i am installing to SD card, installs to ram seem ok. What am i missing?
maybe your cab files are not for the arm processor?
or not for ppc2003?
it is quite strange for a pocket pc application to have more than 1 cab.
You say they install to ram ok but not to sd card, do the programs work once installed to ram? Many programs have an option when downloading to either have an exe file install or a cab file install, have a look at the sites of the software you are installing to see if that option exists for the programs you are trying to install.
ok, to clarify..Dispite the low number of posts i'm not a newbie - been using and developing for ppc for years...The software all installed ok on my ipaqs(3970 + 5450) both with XScale both with WM2003. I am using activesync 3.7.1, and am leaning towards that being the problem, any thoughts?
you don't need activesync to install cabs. if you copy the CAB to your ppc,
and then click on it in the pocket-file explorer, it should install too.
I'm not trying to install cabs. On my pc i click the install program. That launches add/remove programs in activesync, that copies over the cab files to the ppc which are then executed. If install fails they are not removed. that is how i know they are there.
What programs are you trying to install?
based on a post at pocketpcthoughts in august 2003 i changed my todat theme back to windows default - and guess what - no more install problems! no more directory corruption- should i return my device?
Hi,
I just got my MDA II and love it. I've used pocket pc's before but never really got deep into it. I was wondering how, if possible, how to get the .Cab files from .exe's so I can put them in the ext-rom? I want to make my own custom ext-rom but dont have some of the .cab files for certain apps i want in it, I only have the .exe install files. Also...is there a way to save my settings in the ext-rom also? Im away from home and desktop alot so incase of a hard reset Im safe.
Thanks
When you install any program (using a setup program), go, on your desktop PC, to \Program Files\Microsoft Activesync. You will find there folders with the names of the programs you installed, and, in each folder, the related cab file. A few programs install directly in a folder in \Program Files.
thanks for answering.
Or if you are under Windows XP, sometimes you can just right click over the .exe file and select extract, there you will see all the files, including the .CAB ones... :wink:
How do I install a cab file please.?On my Mda 2 ?I installed the mppc 2003 SE merged rom up date (from this site), on my MDA 2 and it worked oK for a couple of days then the device hard reset itself and there was no camera soft ware on it anymore. I thought if I installed the camera software on its own from this site that might be the answer. But it is in cab file form and I DONT KNOW WHERE TO BEGIN/ can anyone help please?
Installing a CAB file is easy...with ActiveSync, drag the file from your PC to your PDA (I drag them to the windows dir, but not sure if this is really necessary).
Then, go to your PDA, to the dir where you dropped the CAB, and just click it once...that is all.
About your other probs, I have no idea...I guess I need more info.
Good luck.
more details about installing cab files?
thanks for your answer. I'm hopeful - but I'm really not very technical. Can I ask more details? When I open the "camera cab file" I get a screen full of little icons all the same. Is each of these a seperate cab file? - do I open the "camera cab" folder, and then drag each one of these little icons seperately to my pocket pc document folder. Or should I NOT open the "camera" folder but just drag the WHOLE folder into my pocket pc document folder - and then active sync with my mda 2. I wish there was a site where I could see the instrucions clearly - with DIAGAMMEs! is there such a site? thanks...
copy the whole cab file
Hi guys,
I think I don't understand the difference between the desktop (.exe) installation and the .cab installation for a ppc programs....
Is there a possibility to install the program in a dir. of the SD? For example, I'd like to create a dir called "Program files" in the SD.
P.S: How can I change the default location for programs installation from device memeory to SD?
Use cabinst (search on google) to install cabs from PPC to different folders - essential tool!
You need registry tweaks to change the default folder, although this isn't really advisable. See Tweaks2k (i think) for this. But with cabinst, not required!
V
Thanks!
If I understand well... I have to install at first cabinstl on my Jam and after that I must use .cab installation!!? (I have to copy cab file in to particolar path of SD or?)
Using .exe install is not possible?
The .exes you download from sites wil (almost always) be for installation on the PC. You double click that, that'll load up activesync and install that way.
The other way is to copy the .cab to your pocketpc and double click. That will install, but gives little control over custom folders to install to and will also delete the .cab after install.
However, after installing cabinst you can double click on .cabs on the PPC and install anywhere.
V
Yeah! With cabinst I can instll app on my own "Program Files" dir in SD...
That's nice but I can't find all the app I have to install in CAB format so... my question is if is there any method to put the files on a specific dir from .exe installation..
Many thanks guys!
if you've got the .exe for the pc, double click it WITHOUT your pda connected. Activesync will load up and you'll get the Add/remove programs screen, saying the program will be installed next time you connect your pda.
Then, on your pc, you have to hunt around for the cab.
I use a program called filetracer to find files, but generally try looking in (I think, I'm not in front of my pc right now) C:\program files\Microsoft active sync\ (or something like that). There you should find folders, eg
\spb\Weather Panel (that's not a real example!).
Dig through there, and you should find eg
Arm_VJStuff.cab.
This is the file you need.
Sometimes you'll get a bunch of numbered files. eg If you see one like
2577_vjstuff.cab amongst other numbered files, the 2577 is the one you want (2577 refers to ARM, the chip in your PDA).
Copy that cab file to your desktop or wherever you want to store it, and copy a copy to your PDA. When you connect up your PDA activesync will ask if you want to install the installation you aborted earlier. Just cancel it.
From there, just install on your PDA with cabinst!
Sounds complicated, but you'll get the hang of it very quickly!
I keep all of my cabs in a folder for installation from hardreset very quickly.
V
Sounds good!!! :wink:
Thanks!
in paticular i want the cab file for MorphGear. how do i do this? I have tried using cabinst but that doesnt seem to do anything
Some ".exe" are extractable with a soft such as "Winrar" :wink:
if that doesn't work then try the following.
1. Remove app from you computer and device
2. Disconnect device from comp
3. Run exe for app
4. When you see the message "this app will be installed on next sync" go to start---search
5. look for *.cab that was created or modified today and is less than 1MB (change file size to whatever value you think is appropriate)
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
chrisredmayne said:
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
Click to expand...
Click to collapse
Can you install Activesync tho, dont have to sync just get it to install. If you can than run the morphgear.exe and after it says it will install on the next sync, go to C:\Program Files\Microsoft Activesync\ and you will see a Marat folder, the .cab is in there. It will almost always make a new folder and put the .cab of the program you are install into the Activesync folder, if it is not there than it created its own folder under Program Files and the .cab should be in there.
Just because im bored I downloaded this MorphGear.exe
http://dl.filekicker.com/send/file/155967-7256/MaratSetupPPC2003.exe
And have attached the .cab that was put into my ActiveSync folder for you.
wow thanks that was very nice of you!
i checked that folder and there was about 10 different morphgear files that id been messing about with! And they worked! Well chuffed i am
Is anyone playing gameboy games on it? On the website listed in the first post the module (MaratSetupPPC2003.exe) leads to an invalid link. But i found it on xda http://forum.xda-developers.com/showpost.php?p=904167&postcount=5 i installed it but it only wants to see snes roms