Related
Hi,
Can someone tell me how a can redirect a incomming call to the mailbox when I don't want to answer that call?
I only can decline the call and then the caller gets a busy tone and know that a pushed the call away....
Settings>Phone>Call Forwarding>Get Settings...
Make sure "No Answer" is ticked and diverts to your mailbox number.
elyl said:
Settings>Phone>Call Forwarding>Get Settings...
Make sure "No Answer" is ticked and diverts to your mailbox number.
Click to expand...
Click to collapse
Thanx for your help, but that one I know... :lol:
What I want is to stop the phone ringing and push it to the voicemailbox!
Now I have to wait 30 sec before the call is redirect to the mailbox...
In conjunction to "elyl's" suggestion, if you don't want to hear the phone ring, then turn the volume off. Otherwise you need a 3rd party software like Phone Alarm.
zerimar said:
In conjunction to "elyl's" suggestion, if you don't want to hear the phone ring, then turn the volume off. Otherwise you need a 3rd party software like Phone Alarm.
Click to expand...
Click to collapse
but sometimes you just don't wanna talk to a person that is calling you... and I don't mean because I'm busy or something just push it away to the voicemail.
I use Phonealarm but it didn't give me the option when the phone rings (with a certain person I don't wana talk to) push it to voicemail!
So now I leave it ringing and then it goes to the mailbox at last.
I've just tried it on my Magician. If you press the red/end button right after it ring then the call is redirected to the voice mail.
hmmm, when I push the red button it gives a busy tone to the caller...
Thanx for trying
do you have the other call divert (when busy, when out of range, etc.) functions active?
Must be an operator-dependent thing then, cos when I reject a call it gets sent to the mailbox. Dial into your mailbox and see if you can change the settings.
zerimar said:
do you have the other call divert (when busy, when out of range, etc.) functions active?
Click to expand...
Click to collapse
Yes when I don't pick up or when the phone is off it go's to the mailbox.
this is for you......good luck trying to get it to work....i didn't have much time (spend about 1hr trying to get it to work)
http://www.winmobileapps.com/device/pocketpc/csb/csb.aspx
Finaly it is working!!
I just re enterd the voicemailbox number and send it again to the telecom provider.... :?
Thanx again for your help and testing...
great to know that you have it finally working
One day I learned (by accident), that if you use the hardware volume button while the phone rings, it will mute the ring tone. That way, you can let it "ring" in silence for the duration of the 30 seconds before it forwards to your voice mail.
I use the vol down in these situations, but I think it also mutes on vol up.
whenever i click the recieve calls on my universal, i'll click the answer button.. and realize that it takes a lil longer for it to actually connect the call..
anyone here have the same problem here? any solutions??
tend to find it depends on:
1. THe phone skin you are using
2. Ring tone specific to each user
3. Caller id picture displays
4. Large ring tones
5. Other apps running simultaneously
6. How long since your last rom update
I think you will find that everydody experiences a 1 second to 2 second maximum delay
I am havin d same prob
Disable the skin on the dailer, and use a windows default ringtone. And a lot of free memory is always a plus
how to disable the dialer skin?
I believe it can be done here:
HKEY_LOCAL_MACHINE/Security/Phone/Skin
Then look for the DWORD "enabled" set it to 0
I am not sure about this though!!! You have to check google (like I did, and found this: http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=5075&catid=36
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
jup, mine sometimes starts vibrating and just doesn't stop.
Soft reset is the only way to get my phone working again
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
I have the same problem. When the MDA is open, everything works fine. But when the lid is closed, the mda freezes after an incoming call and softreset is the only solution. Any ideas about that?
I am using Wizard with WM5.0. The phone software is the default one.
When you dial a service hotline, you normally hear the voice prompt: "English Press 1, French press 2"... How to press the 1 and send the DTMF touch tone over to the service provider? I tried press 1 but there is no DTMF tone generated?
Thanks in advance for anyone who can answer my question.
Strange - it's working (and has always worked with all the ROM's) great with my Wizard. In addition, Menu / Options /Phone / Keypad doesn't have any effect on what is sent out to the other party.
Try doing this with as many DTMF-based services as possible to find out whether it's a problem with the particular service you've called up or a generic one.
In the phone app, you should press "keypad" button to bring back the phone keys during the call to generate DTMF.
Hi, Menneisyys,
I have tried to call two different hotline. I failed to get throught the first question such as : "Press 1 for English, Press 2 for French...". It seems that these two service provider do not have problem as I can call them by my land wired phone.
Hi, micvario,
Yes, I am able to go to the Keypad. But pressing any digits does not send any thing to the hotline...
Very strange....
Hi, when you use the keypad, do digits appear on the screen and can you also hear the tones from the speaker? If so, I suspect the problem may be with the signal quality..
Hi, micvario,
Yes. The digit appear on screen and there is tone from the speaker....
ok,
1) you can call your own landline to listen if tones are really transmitted
2) check signal strenght; i guess if its zero or one bar only, you may not notice in speech but it could be a problem for tone processing at the other end... try to increase and try again..
3) if there are loud background sounds like music, traffic, this may also interfere with the tones..
Hi, micvario,
I made a mistake last time.... (Haven't try this for a few days).
When I press "1", "2".... during a call, I can't hear any DTMF tone generated.
Is mostly a hardware error or software error?
Thanks
wqiiqw
I'm having the same problem
I'm having the same problem. Since I'm using PV4 when I press the keypad I can hear the tone, but no DTMF are sent to the other side of the line.
No DTMF during call
I'm having the same problem. I can hear the tones and the numbers are displayed but not sent across the line. So, I can't delete voice mail. HELP! I also had some one on a voice call tell me they couldn't hear the tones.
Anything further on this? I have the same problem on my desire z. Can hear the tone on my end but no recognition on the receiving end...
I have a Cingular 8125... and there would be times I'd be calling say my service provider...
Usually an answering machine would be picking up the call and tells you to
press 1 for...
press 2 for...
... and so on...
How the heck do we do this? This seemed to be my only problem with our beloved Wizard... pressing the touchscreen doesn't do anything, and pressing the keyboard won't work either...
Anybody have their own solution???
Go to Settings Phone Keypad drop down menu and select Short or Long tones, I use Short tones.
I don't think that the situation has got nothing to do with long/short tones... and anyways... I didn't find any tones list under settings/phone keypad option...
any other clues???
I think you misunderstand, the options are, Long tones, Short tones, and Off.
The reason for telling you to enable the tones was so we would know if your phone is producing the sounds.
This is just step one in the process of elimination, so just enable the tones, then report back and let us know if it’s still not working.
Hi all ,
I'm just asking if anybody tried a professional call blocker that rejects the call before the caller hears the first ring ????
actually I've tired some applications ... all of them, the caller hears the first ring then it hangs up ....
any idea ???
57 Views With no IDEA ((((
It is difficult to reject the call before the first ringing.
Try MagiCall 2 (share).
eye on call
i don't think there's a programe that can do that , but Eye on call is a great program that will give a busy tone in the middle of the first ring , so most of ppl won't notice it rang
Maybe lower tower polling to 0 would get close to intercepting it after the first ring. Mine is set pretty high for battery life, and during a few test calls, I've heard 3-4 rings before the phone even turns on lol
It's a good thing most people I know text me.
Why do you not set your phone in flight mode? Or only on vibrate?
Can you elaborate on the use case why you want this
Well there is a software SPB Phone Suite...This does exactly what you want.
You can get it over here http://www.spbsoftwarehouse.com/products/phonesuite/
vishalkishnani said:
Well there is a software SPB Phone Suite...This does exactly what you want.
You can get it over here http://www.spbsoftwarehouse.com/products/phonesuite/
Click to expand...
Click to collapse
thank you much ... this exactly what i want ... it rejects without the caller notice the first ring
NoCalls by Trinket Software.
http://www.trinketsoftware.com/NoCalls/
The good old CallFirewall .... http://forum.xda-developers.com/showthread.php?t=307178