Related
Anyone else experiencing notification queue dups on their JasJar? I'm getting this on an AppRunAfterRestore event. At first I blamed Pocket Informant (sorry Alek...), but I see that after a hard reset they still occur. I have installed the following apps, but cos this does not happen immediately, I have not yet figured out the culprit All latest versions):
- PocketPlus
- MobiPocket reader
- spb weather (will uninstall cos not updating)
- AeUptime
- GPRS monitor
- eWallet
- Pocket mechanic
- Total commander
- no skype, no eTrust AV
I'm keep to find a proggie I can chron to run at midnight that will clean the queue without manual intervention. Anything out there?
sddaemon is a service of the voice dial app. Look in your startup folder and the exe should be there. You can try moving it to another folder and see if it has any impact on voicedialling (my guess is it will). You can check Scarybear's website http://www.scarybearsoftware.com/ for two freeware apps; one will allow you to clear duplicate notifications manually and the other will go into your startup folder and will clear notifications on every soft reset. Hope that helps
Edit: the startup app may not get the sddaemon notifications, but give it a try and see what it does.
Thanks for that efjay - didn;t know what sddeamon was for.
Scarybear; I'm afraid it doesn't cover this dup:
Note, this startup program will only remove these events: "SSTimeChange" and "conmgr.exe", and "IA_Caller_ID.exe" (with an event type of "AppRunAfterRestore").
craigiecraigie4 said:
Thanks for that efjay - didn;t know what sddeamon was for.
Scarybear; I only tried the manual one and it did not clear the queue, so I presumed the auto one would also not work in WM5. WIll try it now.
Click to expand...
Click to collapse
Dont forget to go to the settings and check the option to remove duplicate events. I tried it on my BA with WM5 and it cleared all duplicates i had.
craigiecraigie4 said:
Anyone else experiencing notification queue dups on their JasJar? I'm getting this on an AppRunAfterRestore event. At first I blamed Pocket Informant (sorry Alek...), but I see that after a hard reset they still occur. I have installed the following apps, but cos this does not happen immediately, I have not yet figured out the culprit All latest versions):
- eWallet
I'm keep to find a proggie I can chron to run at midnight that will clean the queue without manual intervention. Anything out there?
Click to expand...
Click to collapse
I have Ewallet in common. I heard more about it but cannot find it.
Huib
eWallet is a ***** - not nearly as compatible as ppl think. If ur JJ won't turn on, it's almost definitely an eWallet notification set to run on wake-up. EVERY time I run eWallet I go to my queue and kill the app it adds. Main issue is that it's path is to the SD card, and card is not readable in those first few microseconds of wake up, so device cannot get past that point.
If u have this problem, soft reset, go to notificaiton queue, and find \storage...\program files\eWallet\.... - kill the little bugger!
efjay said:
craigiecraigie4 said:
Thanks for that efjay - didn;t know what sddeamon was for.
Scarybear; I only tried the manual one and it did not clear the queue, so I presumed the auto one would also not work in WM5. WIll try it now.
Click to expand...
Click to collapse
Dont forget to go to the settings and check the option to remove duplicate events. I tried it on my BA with WM5 and it cleared all duplicates i had.
Click to expand...
Click to collapse
I remove my duplicates with Pocket Mechanic. And..., how now brown cow... after soft reset they are all back... (nope, there are even two or three more)
Huib
Just remove sddaemon.lnk from \windows\startup\
then soft reset. it is ok
has anybody come across a one button close all application for WM5.0? Spb 3.0.1 is too slow on WM5 and Wisbar Advance 2.4.....is also too much for what is needed. Something like Magicbutton but written for WM5.0 would br nice, nothing that requires much memory, but something that enables the closing of running apps without having to go into start/settings/system/memory...etc.
Wouldn't it be nice if Microsoft had just written in that piece of code, as they are well aware that since PPC2000, that every application opened, remains so unless you manually close it down in memory (therefore hogging memory resources!) :evil:
Well if anyone knows of a WM specific solution, please do share.
mackaby007 said:
has anybody come across a one button close all application for WM5.0? Spb 3.0.1 is too slow on WM5 and Wisbar Advance 2.4.....is also too much for what is needed. Something like Magicbutton but written for WM5.0 would br nice, nothing that requires much memory, but something that enables the closing of running apps without having to go into start/settings/system/memory...etc.
Wouldn't it be nice if Microsoft had just written in that piece of code, as they are well aware that since PPC2000, that every application opened, remains so unless you manually close it down in memory (therefore hogging memory resources!) :evil:
Well if anyone knows of a WM specific solution, please do share.
Click to expand...
Click to collapse
I added couple files which they are usefull for you and they include the closeall app.
Install the cab files you'll see the close all, Reset and Running programs, which they can be clicked from the systray directly, after the installation they require a soft reset or else you go to Start>Programs>System open TrayLaunch and press Enable
GSPocketMagic++ is the most stable program I've tried. You need to put some amended bitmaps in to get it to integrate with WM5 but it works well...
http://www.pocketpcfreewares.com/en/index.php?soft=1276
Thanks guys. I'll try them both and let you know how I get on.
Damn!! My Jasjar is a Rocket!!
sub69 said:
GSPocketMagic++ is the most stable program I've tried. You need to put some amended bitmaps in to get it to integrate with WM5 but it works well...
http://www.pocketpcfreewares.com/en/index.php?soft=1276
Click to expand...
Click to collapse
sub69: I don't know what kind of coding they used in that software you recommended, but it has boosted refresh rates and performance in general by at least 30%!! I know this sounds crazy but it's true! My opinion has completely changed about the speed of the Jasjar. It seriously Rocks! I couldn't care less if it doesn't stay this way, because it shows me conclusively, that future ROMs' will probably address the issues I have had thus far.
I needed this. Thanks a bunch sub69; best link I've had with regards to Universal software.
OK 1 gripe only: I've lost my two soft buttons on the bottom bar (any ideas?). It comes back and stays operational after a soft reset, but as soon as I use the 'close all' option of the program, I loose the soft keys! Damn..there's always a hitch!
Another positive though, the speed boost remains even after I have exited the program and revert to standard WM5.0 launcher!
P.S. I had at least 12 programs running simultaneously with no slow downs at all and 15 megs of Memory still available (tried to run out of memory, But couldn't). Very pleased at the moment, this is what I was expecting from the HTC Universal!! I'll test extensively before I comment further.
Thanks again sub69, u da Man!!
Mental...I didn't realise it was that good!?!
Not sure about the soft buttons, although come to think of it I have noticed they've disappeared a couple of times. Must've been when I hit "Close All" too?
Glad I could help, anyway. Do let us know how things go...
Re:getting better all the time!!
sub69 said:
Mental...I didn't realise it was that good!?!
Not sure about the soft buttons, although come to think of it I have noticed they've disappeared a couple of times. Must've been when I hit "Close All" too?
Glad I could help, anyway. Do let us know how things go...
Click to expand...
Click to collapse
Still cannot believe it!! It's still going strong. Sussed the soft button thingy:Under start (GSPocket)/options/settings...uncheck the 2 tabs for'use exten task close' & 'Use Today skin'. That's it. It runs absolutely perfectly for me & with no need for amended bitmaps too! It fits right in wih my red or blue border themes (I only use my own jpegs now instead of themes - in the hope that I get no performance issues.....so far so good). Under menu settind tab I only select close all & setting (which gives me quick access to all settings in WM5.0..personal & system) and under 'click' tab I leave it as default 'Menu'. I'm so impressed with this software, I didn't think non-specific WM5 software coul be this good!
That site you recommended is also tops!
This software is so good that I must put up a new thread to inform all of your wonder find. I just hope all who try it get the same experience I'm getting. Thanks again sub69....I don't even feel the need for the next ROM update/grade...though I won't be turning it away.
Hmmm, not sure why you're that stunned. I'm finding it just fine - but certainly no faster than my JJ runs under PocketPlus 3.01, and the non-VGA graphics are a real step backwards. Anyone know how to solve this?
You mention a speed improvement; can you clarify: Before this, how long did it take to rotate the screen, and how long does it take now?
MagicButton (mbutton) works with batterymeter
Hi All,
I installed MagicButton (freeware) om my K-Jam. It works so far!
Cheers,
CookieM
pocketpcfreewares.com is great! They do an RSSfeed showing all new and updated software, too, so its a permanent fixture as a "Live Bookmark" on my Firefox bookmarks toolbar.
I must fiddle with some .bmp's for GSPocketMagic++...
Can someone tell me how to install this? In laymans terms
It's simpler than you think
trapper said:
Can someone tell me how to install this? In laymans terms
Click to expand...
Click to collapse
Carnivor said:
CJSnet said:
Which CAB file do I install?
Click to expand...
Click to collapse
GSPMagic.xscaleE.CAB for english on JJ
Sub69, nice start button, now the flawless look sets it off
Click to expand...
Click to collapse
That's the file you need to download for the Jasjar, then if you have an SD card reader, you can transfer it directly to it and install the .cab file by selecting it! If you don't have a card reader, let's hope you have a bluetooth dongle, as it's a small file then you can bluetooth it over. However if you have no problems with your activesync connection, just use that to dump the .cab file on your storage card somewhere or into 'My Documents' on the jasjar.
It's not complicated.
Read the posts craigiecraigie4!
craigiecraigie4 said:
Hmmm, not sure why you're that stunned. I'm finding it just fine - but certainly no faster than my JJ runs under PocketPlus 3.01, and the non-VGA graphics are a real step backwards. Anyone know how to solve this?
You mention a speed improvement; can you clarify: Before this, how long did it take to rotate the screen, and how long does it take now?
Click to expand...
Click to collapse
craigiecraigie4 said:
I can confirm that this programme is small and perfectly funcitonal for closing apps. If you're battling with PocketPlus for some reason, then this is definitely the way to go.
Click to expand...
Click to collapse
mackaby007 said:
For anyone like sub69 who have experienced relatively few problems with their universal, you might not notice any difference, but for anyone who is still suffering performance issues
Click to expand...
Click to collapse
Read the following thread and you'll see that I had performance issues with my jasjar, hence these posts:
Link:
http://forum.xda-developers.com/viewtopic.php?t=30443
ramram said:
I added couple files which they are usefull for you and they include the closeall app.
Install the cab files you'll see the close all, Reset and Running programs, which they can be clicked from the systray directly, after the installation they require a soft reset or else you go to Start>Programs>System open TrayLaunch and press Enable
Click to expand...
Click to collapse
Good App ! made my day, very useful and simple
Cheers
hrb
Yep, using it myself now - but no speed change over PocketPlus (even after hard reset to remove PP). Using it cos I like menu and PP didn;t offer all that much more that other apps don;t give me.
I put smartskey and omap onto my mda...it wasn't working properly so I uninstalled it....
there are no visible signs of the programs on my device but everytime my device wakes up or powers on i get this:
Notification Error
Cannot execute "windows/start/menu/newfoldr/smarskey.exe"
then behind it i get
Notification Error
Cannot execute "smartskey/snartskey.exe"
I just want this to be off of my device since it has been so much trouble. Can someone please help me figure out how to get rid of this without having to do a hard reset?
\windows\startup
remove it from there...
and also remove the smartskey folder where you installed it from...
i did that...nm i ended up doing a hard reset. I deleted the program and folder...there were no visible traces...idk what happened
I had this problem too. Extremely frustrating especially since I had removed all traces (so I thought) of smartskey.
Turns out, Smartskey leaves behind a notification message that gets queued up even if you remove the program and it's shortcut from the startup menu. You need a program like MemMaid to clear the notification message.
Annoying Smartskey issue, PLEASE help
nandaiyo said:
I had this problem too. Extremely frustrating especially since I had removed all traces (so I thought) of smartskey.
Turns out, Smartskey leaves behind a notification message that gets queued up even if you remove the program and it's shortcut from the startup menu. You need a program like MemMaid to clear the notification message.
Click to expand...
Click to collapse
I also have this problem on a Wizard and a Prophet. Even though you remove 'all traces' of Smartskey it keeps coming up wuth the queued notification message. Does anyone have a fix for this?
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Re: Annoying Smartskey issue, PLEASE help
Stabilo said:
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Click to expand...
Click to collapse
MemMaid is WM5 compatible. I use it on my Wizard without problem.
EDIT:
Re uninstalling smartskey - I thought there was a specific way to uninstall it mentioned in the smartskey thread? Does this not work?
Re: Annoying Smartskey issue, PLEASE help
Tezcatlipoca said:
Stabilo said:
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Click to expand...
Click to collapse
MemMaid is WM5 compatible. I use it on my Wizard without problem.
EDIT:
Re uninstalling smartskey - I thought there was a specific way to uninstall it mentioned in the smartskey thread? Does this not work?
Click to expand...
Click to collapse
Just tried MemMaid (demo) on the Prophet. It cleared the problem straight away. Went back to the Wizard and MemMaid also worked on that, both machines now clean of the Smartskey notification message. Now that I know how to remove the message I might play around with Smartskey some more. The Smartskey concept is quite good but it seems to interface badly with Omapclock (might just be Microsoft's buggy notification software).
MemMaid also looks a good utility for $15. I think originally I might have been trying to run the MemMaid (installation) exe from the Wizard rather than installing over ActiveSync.
hi, i use smartskey and omap together and they both work beautifully with each other, my device is quicker thanks to omap clock and the wizard is excellent as a one handed device thanks to the shortcuts it creates just like the prophet device where it creates ur soft keys to be the start button and OK button as well.....its like having 2 extra keys just like the prophet.......you can also use the software Check Notifications 1.9 by ScaryBearSoftware to get rid of the smartskey.exe from the notifications queue......
MemMaid v. Smartskey
I installed Smartskey, and it was unhappy. Then the bloody "Notification Error..." started popping up consistantly.
Reinstalled Smartskey, no help.
Uninstalled, No Help.
Looked it up here, Installed MemMaid
Problem Solved.
BTW- Reinstalled Smartskey and OmapClock and they work wonderfully. My initial eror was installing to the SD Card and not main memory.
Thanks for the fix.
I have the Black 2.0 an Radio 1.40 and Oli 1.40, and I installed "MenMaid" and the SPV M3100 boots very slowly 8-10 minutes, and then it works the same, 2 days ago I had the same problem with MENMAID, and uninstalled and made several soft reset and extract the battery at the end it works well like allways, but now I made the same but it very slowly.
Please Could you tell me any advise?
Thanks.
what does this program do? have you tried it on any other ROMS?
I presume you mean Memmaid? I don't use it but it cleans out memory, notifications etc etc. I'm just wondering if it has a setting to auto clear memory or do some sort of clean up on bootup. If it does, perhaps you need to uncheck that setting?? (Only guessing!)
Mike
peezy said:
what does this program do? have you tried it on any other ROMS?
Click to expand...
Click to collapse
Sorry the program name is Memmaid, like say Mikechannon. Is allow to clear the memory, registry etc. is like Sktools but I thing less powerful.
I didn´t try with other roms, because I have few time, and I haven´t got any time to recharge and configure all software, althougt at the end I will have to do.
mikechannon said:
I presume you mean Memmaid? I don't use it but it cleans out memory, notifications etc etc. I'm just wondering if it has a setting to auto clear memory or do some sort of clean up on bootup. If it does, perhaps you need to uncheck that setting?? (Only guessing!)
Mike
Click to expand...
Click to collapse
Yes, you at right, is Memmaid. Is posible that has this funcion (cleun up on bootup), but I uninstalled, This haven´t got to happen. No?
-What can I do?
-Can I boot in Secure boot, will do anything? I try it, but say that push the action key (Which is the action key?).
-What will be the best way to change the Rom?
Very tranks for your attention.
Strange I'ved used Memmaid with most WM6 roms without problems.
You've uninstalled and the issue persists? And you are sure it's Memmaid and not anything else? What version of Memmaid are you using?
I guess you could reinstall the newest version (or another suitable program) and check the bootup apps/services and remove some them to see if that helps. While running what services/prog are running??
If not then a HR and see if the issue is really related to Memmaid.
- Boris
BorisTheSpider said:
Strange I'ved used Memmaid with most WM6 roms without problems.
You've uninstalled and the issue persists? And you are sure it's Memmaid and not anything else? What version of Memmaid are you using?
I guess you could reinstall the newest version (or another suitable program) and check the bootup apps/services and remove some them to see if that helps. While running what services/prog are running??
If not then a HR and see if the issue is really related to Memmaid.
- Boris
Click to expand...
Click to collapse
Thanks BorisTheSpider, the version is 1.61., And now it is lower, the last action was to made a Backup with SKTools, but when boot, at the end appear the main windows, but no respons (or very slow).
Now I disconnect the battery, and I am going to remove apps/services
in bootup, but I don´t know each programs made. If I can I will show the apps/services in bootup for help somebody.
Thanks.
nadivar said:
Thanks BorisTheSpider, the version is 1.61., And now it is lower, the last action was to made a Backup with SKTools, but when boot, at the end appear the main windows, but no respons (or very slow).
Now I disconnect the battery, and I am going to remove apps/services
in bootup, but I don´t know each programs made. If I can I will show the apps/services in bootup for help somebody.
Thanks.
Click to expand...
Click to collapse
Hmm...the problem might be your version, it's quite old. I am running V1.72, PM me if you need the app. I think you should HR to see if the OS is the issue or the apps are the issue.
BorisTheSpider said:
Hmm...the problem might be your version, it's quite old. I am running V1.72, PM me if you need the app. I think you should HR to see if the OS is the issue or the apps are the issue.
Click to expand...
Click to collapse
Thanks for your answering BorisTheSpider. At the end, I made a HR, but I belive to know which is the problem.
I can see that I have 1500 Mbytes used in my SD_Card, but really only had 1100 Mbytes in files. I formatted the SD_Card, but the S.O. say that is used 975 Mbytes and others 900 Mbytes free, I couldn´t format the SD, At the end I could formats the SD with one utility "Format Memorys".
I thought that my real problems could be the SD. I read in this forum that is very common this problem, if used the on/off button to switch off the device and if in bootup is the sddaemon.lnk.
Thanks for your interesting.
I am going to send you a PM.
slow
hey same problem here im using prophet WM5 but the boot time is too long. guess it's because of the slow processor. but it's obviously slower than i first use it. now that i've installed so many things...
but 1 thing is whenever i open the windows folder, it takes like 10 mins to open the folder. is there any rubbish inside any1 removed safely and helps?
any1 has this file called 'cemail' on mydevice ? it's 1.87mb and i dont know what is it's function and it's always there.... too space consuming
Yes, opening the Windows folder is slow - this is due to all the files which are to be displayed.
I have a Trinity Htc ppc. I'm wondering if is possible to >KILL< automatically activesync on my ppc when i disconnect the cable fron pc.
Thank You.
This is the best ppc forum in the world!
Search the forums for QuickMenu it has an option to close activesync on disconnect works perfectly for me
cornelha said:
Search the forums for QuickMenu it has an option to close activesync on disconnect works perfectly for me
Click to expand...
Click to collapse
thank you. but i don't want to use quickmenu (great program) i'm looking for a script or something similar, or registry tips.....
Thanks...
disconnectwhendone in the registry is set to 1.... there's anyone that know the meaning.... and if i can change?
Thanks
lucausee said:
disconnectwhendone in the registry is set to 1.... there's anyone that know the meaning.... and if i can change?
Thanks
Click to expand...
Click to collapse
Where in the registry did you found this ?
I'll test it then and let you know the results
texarcana said:
Where in the registry did you found this ?
I'll test it then and let you know the results
Click to expand...
Click to collapse
HKCU_Software_Microsoft_Activesync_Disconnectwhendone = 1
Thanks-a-lot
http://msdn2.microsoft.com/en-us/library/aa458005.aspx
This might help...
lucausee said:
HKCU_Software_Microsoft_Activesync_Disconnectwhendone = 1
Thanks-a-lot
Click to expand...
Click to collapse
I tested it with some numbers, but no luck. Too bad
Even if You kill activesync after disconnect (I'm using quickmenu to do this) after some minutes activesync starts again.
Anyone has a solution for this?
bye
Crash - Try this:
http://forum.xda-developers.com/showpost.php?p=1749695&postcount=12
AppSentry
AppSentry was made just for this reason. It can kill activesync and other apps on a regular basis. The link is in my signature.
It doesn't require you to run it, it runs itself. And it does not run in background so takes no memeory when it is not running.
solution?
ASyncKiller
This application allows to kill the ActiveSync process when it's in idle state but it just hold in memory...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
lucausee said:
solution?
ASyncKiller
This application allows to kill the ActiveSync process when it's in idle state but it just hold in memory...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
Click to expand...
Click to collapse
I can approve that. Asynkiller does the job well