Database Users

How t remove T-Mobile colours from your device

So here is the procedure of getting rid of T-Mobile's customization:
The whole proccess means you will do a hard reset and you will be installing everything from the beggining! So if you don't want that to happen you have to stay with T-Mobile's customization!
Step 1
Hard reset your MDA Compact (power+soft reset). Do all the neccesary steps (choosing your country and timezone) and when you get in the screen that tells you to tap the screen in order to start working have your stylus at the soft-reset hole tap the screen with your finger and do a soft reset IMMMEDIAELY AFTER YOU TAP THE SCREEN!
Step 2
Your MDA compact will restart without any customization it will be a clean Windows Mobile 2003SE. With the file manager go to the Extended ROM folder that is now visible and install the following files:
Caller_ID_WWE_RC10.CAB
Camera_Patch_WWE_B15.sa.CAB
GPRSMonitor_WWE.sa.CAB
Java_10.1.2.57_WWE.CAB
MMS_2.0.0.13_WWE.CAB
MMS_Settings_WWE_NL.CAB (This file will install the settings of T-Mobile NL but if you don't install it and then change the settings to your providers settings most probably will end up with MMS that does not work. So install those settings and change them accordingly to your providers settings)
Patch_101123.sa.CAB
Version_WWE_101124.sa.CAB
Zip_Magician_T-Mobile_WWE_B12.CAB
Those are all the files you need to install. For those who need intellipad and intellidialer they will also have to install the 2 files for those programs.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2&TPN=4

GPRS Settings
I did all the above!!
But now I can't use Internet Explorer anymore.
I don't have te right settings!!
I'm using a O2 card in the phone!!
Can someone help me???

Re: GPRS Settings
zanders77 said:
I did all the above!!
But now I can't use Internet Explorer anymore.
I don't have te right settings!!
I'm using a O2 card in the phone!!
Can someone help me???
Click to expand...
Click to collapse
Download the 02 settings from clubimate.

intellidialler does not work
I have a T-mobile MDA Compact in the UK.
If I follow these instructions it works fine - thanks. (SOme of the CAB files are UK versions or have later version numbers.
1. Is there a list anywhere of what each of these CAB files does?
2. The Dialler becomes crappy (formatting numbers in the US way, and not searching for contacts). The default microsoft colours are much more intuitive for showing missed calls/received calls etc in the recent calls list than the T-mobile palette, but i can't make the dialler search the address book in the very clever way it usually does. The intillidialler won't install either.
Any ideas?
Thanks,
Nigel.

Has anyone found decent versions of intellipad and intellidialler to install after doing the debrand on a UK Compact?

Quick question, i did all this and it worked fine for me, orange sim is working happily away when i unlocked the device via IMEI check and installed the orange rom but i've lost the clearvue products suite. I've looked in the extended rom partition but i can't find it
love this thing tho...still fiddling with it 2 months down the line
and how do i get the default microsoft colours?

27 said:
Caller_ID_WWE_RC10.CAB
Camera_Patch_WWE_B15.sa.CAB
GPRSMonitor_WWE.sa.CAB
Java_10.1.2.57_WWE.CAB
MMS_2.0.0.13_WWE.CAB
MMS_Settings_WWE_NL.CAB (This file will install the settings of T-Mobile NL but if you don't install it and then change the settings to your providers settings most probably will end up with MMS that does not work. So install those settings and change them accordingly to your providers settings)
Patch_101123.sa.CAB
Version_WWE_101124.sa.CAB
Zip_Magician_T-Mobile_WWE_B12.CAB
Those are all the files you need to install. For those who need intellipad and intellidialer they will also have to install the 2 files for those programs.
Click to expand...
Click to collapse
Can you tell me where can i find all those CAB's and intellipad and intellidialer CAB's. Please because I'm a new about this stuff :lol:

Newbie Essentials O2 Germany for English users

First of all the correct unlock utility can be found on this post:
http://forum.xda-developers.com/viewtopic.php?t=33796
The next most important thing is to know how to do a hard reset, you hold the "Communication Manager" and "Voice Speed Dial" buttons while pressing in the soft reset button(that is the small button next to the IR port), make sure to keep holding the two buttons after you press the soft reset. Then a screen will apear to have you hit the green call button to make sure you want to reset. This will format your user info and make you peform the startup tests again.
If you want to load an english rom, I suggest the Qtek one since it is very easy and all the software runs on the computer instead of needing to load files on to a SD card or the wizard. The whole application can be found here:
http://www.beyondthetech.com/blogs/kjam/
The link to the file is at the bottom of the page in the last blog. You will need to have Active Sync 4.1 for this phone and it will have to be working for this application to work.
Have fun everyone and I think this forum is great.

Sorry, but I can't find anything on this pages.Does anybody have an English Rom of HTC Winrazd???I have a HTC winrazd but it's Germany.I needed an English Rom.Sorry for my bad English!!!!!!!!!!

hi all,
Am also looking for english rom for wizard..I would very much appreciate if any one can help.
Tks isse

English rom here
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html

i have an imate kjam & i was wondering...
what would be the best rom image for it? should i keep it on the imate rom or is there a better rom with better features for my kjam?
tx in advance.

Help with trusted certificates on WM5?

Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!

Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.

Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!

I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one

really! which software could i use to reboot the phone??

also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?

yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.

What software did you use or could i use to reboot my ppc chuckchuck?

AKU2.2 will re-enable clock in Title Bar

http://blogs.msdn.com/windowsmobile/archive/2006/04/28/586453.aspx
On the WM Team Blog they address the reaction to the nearly worthless battery icon replacing the clock. Good news is that ROMs using AKU2.2 and later will allow you to add the clock back in, bad news is that the current JasJar ROM (1.30.76) doesn't seem to have the 2.2 release of AKU.
Can people with other carrier's ROMs check to see if the registry edit they provide works with your ROM?
The egistry edit is to add a DWORD titled ShowTitleBarClock with the value of 1 in the HKEYLM/SOFTWARE/Microsoft/Shell location.

Didn't work for me

Doesn't work in the latest dopod rom 1.30.111 either...

The message on the MS site is from yesterday, and the guy is speaking of a "further release", i think AKU 2.2 don't exist yet
btw: isn't working on my wizard too

AKU 2.2.1 exists...
this is the nessesery file, you need to replace the existing one with this one (windows directory)
and add
[HKEYLM/SOFTWARE/Microsoft/Shell]
"ShowTitleBarClock"=dword:1
this is only for AKU 2.0!
!!!Attention: Make a backup and read through this tropic!!!
Problems with Universal roms!!!!
Perhaps related to the certification. Plz someone with removed certification try this... and post the results.

RE
The shell32.exe file in my QTEK 9000 is located in ROM something which you cannot copy out.
Does a soft reset reverts back to original battery icon if I'll to replace with the attached shell32.exe file?
After the battery icon is replaced by the clock icon, can I add a date to it also using any known method to put a date on top of the clock?
I believe a hard reset will definitely reverts back to the original battery icon, right?
Thanks

only a hard reset reverts back to the original.
add a date: I think so... not tested, but it should work.
I have a special rom where it is possible to overwrite system files, but It could be difficult to replase shell32.exe on a normal rom and I cant make a cab, because I dont know how to sign that.
plz someone with the knowledge about that make a cab.

don't bother, because even if you replace the shell32.dll, it wont restart, displaying the keyboard and getting stuck there.
You will have to hard reset and restore from a backup to get back your device.

A word of warning - back up before trying this. It hosed my universal. It would not even finish booting, and I had to hard reset.
Surur

Ok, I realy sorry.
It works for me...
Himalaya (rom based on 2.00a)

On my ROM (Qtek latest) in \Shell\Taskbar there's a regkey LimitedClock set to 1. If I set that to 0, the clock will at least display everywhere except Today, both in landscape and portrait modes. With it set to 0 as per standard, the clock only shows up while in apps *and* landscape, apps/portrait it doesn't. As long as the Today screen time&date plugin is switched on, this means you've always got the clock. BTW, needs a softreset to activate, Taskbar settings apparently are only read on first startup.

bepe said:
Ok, I realy sorry.
It works for me...
Himalaya (rom based on 2.00a)
Click to expand...
Click to collapse
I'm sure you realise this is a universal forum? You should edit your post to remove your file before somebody else zaps it's unit.

I dont think so, because the os is the same.
My rom is not realy Himalaya, it is a ported wizard os and only the drivers of Himalaya.
So the file should work on all WM5 devices, perhaps the problem is related to the removed certification on Him 2.0 rom's.
(This file is from an Atom rom not Himalaya)
But you are right, I edited the post.

Disablesecurity.cab, replace shell32.exe with new, softreset
Hangs at boot with the soft keyboard superimposed over the boot screen. Hard reset to fix.
Basically, avoid this for a while.

......or use Wisbar Advance 2 and you have your clock back on the Today screen....
Cheers
hrb

JasperJanssen said:
Disablesecurity.cab, replace shell32.exe with new, softreset
Hangs at boot with the soft keyboard superimposed over the boot screen. Hard reset to fix.
Basically, avoid this for a while.
Click to expand...
Click to collapse
I can confirm this - same result on the latest O2 AKU2 Rom.
Cheers,
Steve.

Same on the Dutch SPV M3000 AKU2 ROM. Phone doesn't reboot.. ..had to hard reset...

JasperJanssen said:
On my ROM (Qtek latest) in \Shell\Taskbar there's a regkey LimitedClock set to 1. *zap*
Click to expand...
Click to collapse
You can access that feature simply by going to the date/time settings and enabling "Display the clock on the title bar in all programs" on the |More| tab.

O2 xda Atom have AKU2.2.1 and it really works no more battery icon.

bepe said:
AKU 2.2.1 exists...
this is the nessesery file, you need to replace the existing one with this one (windows directory)
and add
[HKEYLM/SOFTWARE/Microsoft/Shell]
"ShowTitleBarClock"=dword:1
this is only for AKU 2.0!
!!!Attention: Make a backup and read through this tropic!!!
Problems with Universal roms!!!!
Perhaps related to the certification. Plz someone with removed certification try this... and post the results.
Click to expand...
Click to collapse
Hello,
It is my first post on this forum.
Yesterday, I unlocked my frensh SPVM3000 (Wizard) and tried to replace my "shell32.exe" by the "shell32.exe" downloadable on this post.
It was a BAD idea! My SPV starting crashed because it was for Universal smartphone. I used the button sequence to re-install the original software.
Have you an address where I can download the "shell32.exe" of the Wizard AKU 2.2 software?
Thanks for your help.
Seb...

ELF0100 / HTC P3450i New Model?

Hi, im new to scene and already have a Imate jasjam (the TYTN) and have flashed it already to a new rom and works great.
However the HTC TouchFlo that I have seems to modified in some way as to not allow the old style Hard Reset / Soft reset, and has way diff specs for ram etc. It only has an inbuilt menu item to Master Clear the phone, but not rebuild menus etc.
Also the Elf / Elfin utility (dsixda's) to read the pda version etc will not work, and the utility to download the current spl (Dump SPL) fails as well.
and system/ >> Device Information/Hardware menu is missing on my phone
Is this common knowledge? As ive browsed here for a few days looking for the answer. All i can assume is they have implemented some lock to stop reverse engineering.
have i missed a step somewhere?
Here is a Gallery of images, to view.
http://img195.imageshack.us/gal.php?g=image011is.jpg

To add i copied dim application from my other phone (HTC TYTN), and most of the fields are empty. still says rom ver / date blank, radio and protocol blank
hardware. cpu blank, speed blank, ram size 6881394MB flash 7602288 MB, storage 72.78 MB , model and imie blank.
It doesnt matter too much with whats going on, its seems to have been manufactured less that 2 months ago and i have no problems with it.
Would have been good to slightly customise it, but nevermind.

Yup, most of the stuff have been changed.
TYTN is slightly older and therefore has more hardware buttons.
If you wish to hard reset, here you go:
http://www.flickr.com/photos/ryjones/2193904710/

Just to let you know that doesnt work either.

Found out how to hard reset.
Press Power, Camera, Call (green) and Disconnect (Red) , and reset with stylus.
hold buttons for 5 seconds, screen will go BLUE.
Release, all 4 buttons and when loaded system is default again.

excuse me, I have the same HTC, from China. Now it has only English. Could you help me, haw I can make it Russian?
Thanks

Help me how to change from france to english
Help me how to change from france to english ,
please can someone try to show me the way how to change language or install a new software,i have a france windows

Start -> Settings -> System -> Regional Settings.