Really sorry - can someone point me in the direction of a tool that unlocks the extended ROM for a Wizard? I'ves searched but I can't find Am I being blind?
I need to free up some space and want to get rid of those imate .tsk files but need to unlock the ROM first.
Thanks
Mat
Try this one
Download this
http://www.ghisler.com/pocketpc.htm
Then type (after install)
“\Extended_Rom\”
and walla
Didi
...
Hi,
can somebody explain how i can delete the files in extended rom ? i tried with TC and the files seemed to be deleted, but after the hardreset they were still there.....I want to get rid of them and install some other programms too.
Thanks and regards
Joachim
...
Hi,
can somebody explain how i can delete the files in extended rom ? i tried with TC and the files seemed to be deleted, but after the hardreset they were still there.....I want to get rid of them and install some other programms too.
Thanks and regards
Joachim
Ok Total commander gives you access to the extended rom using the method just posted above.
But if you want to actually have the extended rom showing all time, then you need this...
http://forum.xda-developers.com/viewtopic.php?t=33680&highlight=extended+rom
The extended rom unlocker will give the actual extended rom as space deginated extended_rom2 and its about 9.85mb size or something with between about 350kb and 2.5mb of .cab files in it depending on whether its a Qtek (Which has the least amount of files), I-mate, o2 or T-Mobile, these last two probably (along with Orange) will have the most 'junk in them.
Once you have ran the exteneded rom unlocker and soft reset your device it will be accesible through file explorer you won't need TC.
You can then go in and delete (be careful to make sure what everything does first) its your own responsibility, and remove what you don't need.
For example on the I-mate Extended Rom you cane remove Backgammon, Skype and the anti virus prog. There wasn't much on the Qtek Rom I just put on mine just clearvue and soemthing else inconsequential, there was no skype or antivirus, but I believe some Qtek roms might have this.
T-Mobile is abother story, there is a shedload of crap in the extended rom, ranging from a today screen toolbar to small progs, there is list knocking about of what each file does. When I changed from T-Mob to I-mate and then Qtek I just transferred the T-Mobile GPRS settings and the GPRS disconnect button .cab and put them in the exteneded Rom myself and let it run.
Also on I-mate Rom there are carrier settings that you can delete which won't apply to you, basically lots fo countries phone settings, like o2 UK, T-Mobile Spain etc etc, depending on where you are in the world.
You can't delete the I-mate .tsk todayscreens as far as I know, they are not in the ExtRom. The Qtek ExtROm doesn't have the extra .tsk's just default and the Guava Bubbles one.
If anyone wants the T-Mobile GPRS .cab and GPRS disconnect button .cab I can send it through msn or email.
that doesn't work either. I treid with the unlocker and deleted the files with TC. If i check the content no files are there, but when i try to copy other files to the ext. Rom it says that the volume is write protected. I softreseted several times also.
Any hint on that ? How have all the others deleted the files in extended rom ?
Regards
Joachim
batman08 said:
that doesn't work either. I treid with the unlocker and deleted the files with TC. If i check the content no files are there, but when i try to copy other files to the ext. Rom it says that the volume is write protected. I softreseted several times also.
Any hint on that ? How have all the others deleted the files in extended rom ?
Regards
Joachim
Click to expand...
Click to collapse
Might not work for you but it worked for me and a load of others. Once the extended rom is visible you can delete files easily, you don't need TC like I said. Its easier to put additional cabs into my documents sync them across and just run them.
Yeah, that's a pitty.... I have the Vodafone VPA Compact II, which is the Wizard 100 afaik.
Someone around here has the same model and succeeded in removing the cabs from the extended rom ?
Related
Hi all,
I've had my S100 for a week now. It came with ROM ver 1.06 (I think) and right on the 1st day I upgraded to 1.11 and finally decided to apply Anansky's Big Storage ROM. All work perfectly even with my Jabra BT800. I've been trying many different 3rd party software. As usual, after installing and deinstalling, my unit became unstable and therefore would like to start from scratch.
In XDA's ftp site there is a Qtek 1.11 Ext ROM zip file. At first I installed all, but I think I could do away with some. Based on the filenames, some are self explanatory but I don't know which ones I can do without. Could someone be kind enough to explain?
Delete_vdisk_shortcut_WWE.sa.CAB What does this do?
Caller_ID_Magician_Generic_WWE_RC13.CAB Selft explanatory
SmartDialing_Magician_Generic_WWE_RC13.CAB I've read in other threads that some don't install this when using sw like MSVoice Commands.
PhonePad_Magician_Generic_WWE_RC12.CAB I think this contains T9 and what else? How can I edit this file to remove unwanted languages other stuff?
CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab I believe this is essential, right?
CV2.41.386_WWE.CAB No clue. Is it essential?
JMM101257_WWE_1004.CAB No clue. Is it essential?
BTHUSB_PATCH_AKU26.CAB Self explanatory
Version_WWE_111129.sa.CAB What is it for? Is it essential?
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
johnannie said:
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
Click to expand...
Click to collapse
If you have the Anansky ROM installed I don't think you will have the option to install the extended ROM when you do a hard reset, mine doesn't. You have to install the extended ROM seperately. You should have made a backup of your extended ROM before doing the Anansky hack. If you don't have it, maybe you can download it from the XDA ftp site. Remember only install .cab files, don't execute the autorun or you may wipe out your big storage. Even if you install all of the Ext. ROM files, they don't take up much space in the storage area (maybe 1.5 or 2 meg.) depending on your Ext. ROM.
Thanks for the responses but I would like some information from you experts on the following:
1. Which CAB files can I do away with and why?
2. How can I edit the PhonePad.CAB in order to remove unwanted languages? Any special software needed?
The Qtek 1.11 ExtROM found in this forum's FTP site has 9 CAB files. Some of them like the Caller ID is self explanatory, meaning this must definitely be installed if Caller ID is one of the functions one needs.
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank
OK, I understand how to do it with either the NoID updater or with HTC64 - that's not the problem...
What I want to know is this: if I change the Orange ROM to the latest i-Mate ROM, what happens to all the Orange network settings? Will I lose them or will the update only affect OS-type things?
Alternatively, which files in the Orange ROM will I need to replace in the i-Mate ROM (if I cook up a ROM of my own) in order to get the speed of the i-Mate ROM with all the Orange settings?
madcapmagician said:
OK, I understand how to do it with either the NoID updater or with HTC64 - that's not the problem...
What I want to know is this: if I change the Orange ROM to the latest i-Mate ROM, what happens to all the Orange network settings? Will I lose them or will the update only affect OS-type things?
Alternatively, which files in the Orange ROM will I need to replace in the i-Mate ROM (if I cook up a ROM of my own) in order to get the speed of the i-Mate ROM with all the Orange settings?
Click to expand...
Click to collapse
I guess it depends on which settings. If you are talking about mobile operator settings (like MMS, SMS, GPRS) then they are normally stored in a cab file in the extended ROM so all you have to do is copy the Orage extendedrom to your hard drive, flash the imate ROM, then install the appropriate cab file from the orange rom by copying it to the sd card and double clicking.
If you are talking about other settings (Wallpaper, splash screens, etc.) then this is ROM specific.
I may be wrong but I guess this is how it is.
It's just mobile operator settings I'm after.
I'm worried that once I install the i-Mate ROM I won't be able to use my phone. I know there's a long post that gives all the Orange settings but it just seems silly to have to enter them manually if there's a cab file that does it all for you, you know?
Thinking about it, could I install the i-Mate ROM then run the appropriate Orange cab file?
I believe that's what i said in my message :roll:
Hehe these settings are stored in your extendedROM. Do you know how to access ExtendedROM?
Give me a list of the files you have there.....I'm sure you can spot the operator settings. Or if you want, install Imate ROM then bypass it's extendedROM then install all orange CAB files that you transfered from ExtendedROM of orange to the PC.
Yes, I've already got the Extended ROM visible and writable.
This is the complete list of CAB files in the SPV M5000 Extended ROM:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
How about this, try this:
1. Install Imate ROM
2. Unlock/Unhide ExtendedROM
3. Delete Imate ExtendedROM and copy everything from the Orange ExtendedROM
4. Hard Reset
This will install the orange extended ROM
Now if you get some trouble with security/signing, there is a cab file in the XDA DEV ftp site that can handle this.... Just make the extended rom run this first before everything else.
OR
Just hard reset, bypass extended rom install, unlock/unhide extended ROM and then click on the files one at a time
How about this, try this:
1. Install Imate ROM
2. Unlock/Unhide ExtendedROM
3. Delete Imate ExtendedROM and copy everything from the Orange ExtendedROM
4. Hard Reset
This will install the orange extended ROM
Now if you get some trouble with security/signing, there is a cab file in the XDA DEV ftp site that can handle this.... Just make the extended rom run this first before everything else.
OR
Just hard reset, bypass extended rom install, unlock/unhide extended ROM and then click on the files one at a time
Hi Guys,
New here , so please forgive all stupidity....
I've got the new jasjar rom, about to flash my Orange SPV M5000, I'm currently running it without the orange customization, ie, i hard reset, reloaded the rom, then soft reset to avoid orange rubbish being, loaded, then manually reset the gprs etc,
If i flash the jasjar, will i get the same situation, but a quicker phone?
Any ideas?
Thanks,
James
Er....why did no-one mention that after installing the i-Mate ROM the phone then asks which operator you're with and then sets itself up accordingly?
:shock:
Im an M5000 owner too that was wondering about flashing to the imate rom...
Im after the microsoft direct push client thats on the new imate rom.
OK, plucked up the courage to upgrade to the jasjar rom, but I get a country ID error message,
Any ideas?
James.
Did you put the PPC in bootloader mode first?
Did you use MaUpgradeUt_noID.exe?
No, where do i get that from?
i just ran the jasjar rom exe....
Any ideas now?
J.
Extract all the files from the Jasjar .exe file to one folder with WinZip.
Replace "ROMUpgradeUt.exe" with "MaUpgradeUt_noID.exe" - you'll find it below.
Disconnect your phone from the USB cable.
Press and hold LIGHT + POWER + RESET until the screen goes white and it says "serial" at the top.
Plug in the USB cable. "Serial" will change to USB.
Double-click on "MaUpgradeUt_noID.exe" - the PC and phone will do the rest.
If you get a country error, just repeat the process.
download roms
where can I download the imate extended rom and the orange extended rom?
thanks for that, i've opened with Win Rar and got two folders OutputFile and RUU_Tools.
Sound right?
Then I drop the maupgrade app into RUU/Universal/WWE?
All good?
Thanks,
J.
Also, if i run the ma upgrade , nothing happens.....get the run dialog, then nothing.........
Ideas?
Ta,
J.
quietmoney said:
Also, if i run the ma upgrade , nothing happens.....get the run dialog, then nothing.........
Ideas?
Ta,
J.
Click to expand...
Click to collapse
Copy everything from the 2 folders into one folder then run the maupgrade from there.
Rememebr to be in bootloader mode before running MAUPGRADE and remove the SD card before upgrading
Please help me
I have upgraded the Rom on my SPV M5000 with the Imate ROM but lost all the Orange settings.
Can I get it back?
Re: Please help me
pjfdias said:
I have upgraded the Rom on my SPV M5000 with the Imate ROM but lost all the Orange settings.
Can I get it back?
Click to expand...
Click to collapse
Did you backup to your PC the Orange ExtendedROM? The Settings customizations were there.
If not try the XDA DEV FTP site. THey have extendedROM's there for download. Don't know if they have Orange ROM but just download it then put in SD card and run the appropriate CAB file.
Check the wiki of xda dev for instructions on how to connect to FTP site
Hi Guys i own a imate JAMin that i bought and it has telstra branding on the phone/pda, it isnt locked to this carrier, but i need to get rid of there loaded stuff on the pda
what i need to know is a few things if possible please
1. is there a walk through somewhere on how to change the rom to a standard one
2. where can i download a new rom from
3. can i screw it up bad ?
any other help would be great
Thanks
t0ne
Easy, just download Total commander from http://www.ghisler.com/
Open it up and at the top type \Extended_Rom
This will show the contents of your extended rom, you will see loads of things but the ones you want are the cabs relating to your provider. Or all providers actually, Delete allt the cabs that dont start with Default_ these are what brand your device when you hard reset.
Now just hard reset, it will isntall all the normal stuff but will leave you with a brand free jamin.
Hi dannyoneill,
thanks for the program, only problem i have is how do i add the jamin to it so that i can see it and do what u r saying ?
thanks
You need to download and install Windows CE FS plug-in. You will then see a mobile device entry in the file window. I recommend dragging it to the toolbar so you will always have a button for convenient access (total commander can open files directly form the device).
Also I don't remember it now, but if you search this forum there is a registry tweak that will unhide your extended ROM so you can use it for extra storage space (and manipulate files in it using regular explorer both on device and PC). You can use the free PHM Registry editor to apply the tweak.
Just follow the instructions to install total commander onto your PPC. Make sure you click the link to the mobile version and not the desktop version.
thanks dannyoneill, got it working..
jsut a few other questions if u dont mind
im in the \Extended_Rom folder with the default stuff but the telstra stuff i want to get rid of has Default_Telstra_australia_SA_UN_V2.20.CAB and also Default_Australia_Telstra.CAB as the file names, will these be ok to delete still ?
thanks
Yes, you can delete them.
If you really want everything here is safe to delete. What it usually contains are patches like driver updates, applications like the backgammon, antivirus and Skype.
Below is taken from another post, its a little out of date but still good to see whats what. For me. I removed all the operators apart from my own (as it doesnt brand) plus got rid of backgammon, antivirus (totally useless on a PPC) and skype as the latest version is better (especially if you apply the registry fix to get it working)
Autorun.exe
Default_Backgammon_PPC_IMAM001.CAB >>> Backgammon
Default_CAAVPPC_IMEI_Wiz_range.CAB >>> THE DREADED ANTI VIRUS STUFF
Default_CAB-shortcut-CDL-08Sep05.CAB >>> Clearview PDF
Default_cdl_wwe_version.cab >>> Some Imate stuff (Harmless)
Default_ie_view.sa.cab >>> Some Imate stuff (Harmless)
Default_Imate_PPC_SA_V5.5.03.cab >>> Some Imate stuff (Harmless)
Default_SkypeForPocketPCnonxScale.CAB >>> SKYPE FOR NONE XSCALE !!!
Default_SmartDialing_enable_0915_signed.CAB >>> The pretty Dialer and smart-dialer stuff
Install_Tsk.exe >>> This Installs all the “Default_” Files
Setup.exe >>> This allows for Selection of the “Operator Settings”
These are the “Settings” which is not needed at least in the GULF STATES
KPN_Nederland.CAB
MTN_SouthAfrica.CAB
O2_UK_Contract.CAB
O2_UK_PAYG.CAB
Optus_Settings.CAB
Orange_Nederland.CAB
Orange_UK_Contract.CAB
Orange_UK_PAYG.CAB
T-Mobile_Nederland.CAB
T-Mobile_UK.CAB
Telfort_Nederland.CAB
TelstraClear_NZ.CAB
Telstra_Australia.CAB
Virgin_UK.CAB
Vodacom_SA_WAP1.2.CAB
Vodacom_SA_WAP2.0.CAB
Vodafone_AU.CAB
Vodafone_Nederland.CAB
Vodafone_NZ.CAB
Vodafone_UK_Contract.CAB
Vodafone_UK_PAYT.CA
I made a copy of all of the above to an SD card BEFORE DOING ANYTHING else (NoBackUp…learned his lesson……Harry Potter !!!)
So I Reduced my ER to Just
Autorun.exe
Default_Backgammon_PPC_IMAM001.CAB
Default_CAB-shortcut-CDL-08Sep05.CAB
Default_cdl_wwe_version.cab
Default_ie_view.sa.cab
Default_Imate_PPC_SA_V5.5.03.cab
Default_SkypeForPocketPCnonxScale.CAB
Install_Tsk.exe
Setup.exe
How just simply Delete !!!
Don’t forget to hard reset let the imate setup run (will not only install the stuff you did not delete) and try out your new toy.
Click to expand...
Click to collapse
dannyoneill thanks heaps,
deleting those to files worked a treat
thanks again
t0ne
Poll for sticking this 3d!
THANKS !!!
..._
P.S.: may I install basic stuff to the ExtROM while it's hidden ?
Or, if I need to unhide it, install, then re-hide, will such software still playable ?
I mean for example:
- Total commander itself
- Resco explorer
- Storage tools
- Sprite Backup
- and so on...
Is it a strange idea ?
Thanks again for this illuminating thread.
You can unlock and install things no problem, not done it myself, done know if they will still be usable after its re-hidden i would think not.
The extended rom is reserved so empty or not its not going to give you more ram or rom storage at all. The best thing to do is unlock it and use it for storage. The annoying thing is if you hard reset you then have to re-unlock it.
t0ne said:
dannyoneill thanks heaps,
deleting those to files worked a treat
Click to expand...
Click to collapse
BTW, on the i-mate website's JAMin support pages, you will find specific operator settings for Optus in a downloadable CAB file, which will setup the wireless settings for your device.
Can someone share with me about how to uninstall the pre-installed softs in O2 atom and how to access the ATOM extended rom.
I have already tried to install some extended rom in this forum, but it doesn't work. If you know one which works out well, please tell me how can I get it.
With the previous O2 model, after hard reset, we can soft reset during the installation of the attached software. However, with o2 atom, I can see no installation process for the attached software. I want to know about how to uninstall these software as I don't really need to use all of them.
Thanks all
Attached is a small app, install it, rest it your atom and you should be able to access your extended rom, be carefull though of what you do, advice to copy the content of the e.rom to your sd card in case you have to undo any changes.
MOst of the software which is preinstalled on XDA ATOM is into the rom image , in the extended rom there are some files, thets why you dont see any instalation after flashing, because the apps are already installed with the rom
taiseer999 said:
Attached is a small app, install it, rest it your atom and you should be able to access your extended rom, be carefull though of what you do, advice to copy the content of the e.rom to your sd card in case you have to undo any changes.
Click to expand...
Click to collapse
Bothe the XDA Atom and the HP iPAQ hw6915 and rx6815 are made by Quaranta. The extended ROM of my hw6915 isn't able to unhide with the registry hacks I had from the HTC devices.
Could the above unhide cab be installed on my hw6915 and if neccesary be UNinstalled ? Could the underlying registry hack be provided ?
Many thanks in advance.
EDIT:
The .cab installs on the hw6915, but the extended ROM isn't shown. The unlocker does the same as the extended ROM unlock on HTC devices.