hi!!
i need some help with my mda compact..
i bought a new sd 2Gb card and it wont read it...
its asks to format it and does but nothing else...
thats it..
it cant read it..
I've had the same prob with an 2Gb MMC, and i fix it by unscreawing a bit the top 2 screws of the mainboard (have to open the upper back part). The ideea is to push the card slot backword, until it reads the card correctly, anddoing this with the battery cover on place, to be able to power on your device after uncreawing a bit, to test the rezult. By doing this I fixt also some reading problemsa that i had with other card (when paying movies from the card, it would freez the move until I would pull out the card and put it back again). Hope to be of help.
Hi All,
Wonder if this is common or should I return the unit now. Had my Dopod 838 Pro for a week now. Great phone/PDA but since new, it does not always recognise a Micro SD card at first insertion. Tried 1x512 Sandisk and 2x1gb Ultra II cards with same issue. Phone has latest ROM from factory, 1.03.707.4. The insertion seems "clunky" too, that is, it doesn't go in smoothly like regular SD and Mini SD devices I have got.
What I have noticed is that if I only insert just enough to lock the card in it seems okay, but if I push it firmly home, it is more likely to remain unrecognised.
In every case, once recognised, it runs, saves, reads from the card flawlessly so it does seem like this is a hardware issue. But if all the Hermes phones are similar, it may be just one of those characteristics of the phone and nothing too much to worry about. Just like to know so I can relax or act as the case may be.
Thanks for any feedback guys...
John
Yes, I have found a similar issue. If I remove and re-insert the card a few times it eventually gets noticed.
It's the only glitch I have had on the device after 3 flawless months
MarkD said:
Yes, I have found a similar issue. If I remove and re-insert the card a few times it eventually gets noticed.
It's the only glitch I have had on the device after 3 flawless months
Click to expand...
Click to collapse
Quite a few seem to take a few goes before recognised but usually seem to work fine once recognised.
Might be a bit concerned about jpfe8851's clunky slot and if it seems to go past the normal stopping point - Have not seen reports about this and mine does not do this.
Mike
I've noticed that it works everytime for me if I insert the card with the device turned off.
Martin
If you use your camera application to save the pictures on a memorycard, try to run the camera after inserting the card if it doesn't detect it. The camera app. then informs you that there's a new memcard inserted and do you wanna use it to save the files on.
Not so much of an hasle, considering how often you really remove/insert memory cards and the hermes has the camera button just opposite to card slot. And the application doesn't stay on the process list if you close it from the X (cross on upper right corner). The OK button doesn't completely close the application.
Inc said:
I've noticed that it works everytime for me if I insert the card with the device turned off.
Martin
Click to expand...
Click to collapse
Same with me I turn it off to remove and then turn it off to insert and it will pick up the card
y2whisper said:
Same with me I turn it off to remove and then turn it off to insert and it will pick up the card
Click to expand...
Click to collapse
This sounds like good practice and I'm sure for most folks this works. I think though there some people that struggle to get Hermes to recognise the card even when inserting it when off. Generally it does recognise it in the end but there could be a few reasons for these issues (formatting, fragmentation, poor physical contact and so on).
I think your advice is good though and should become routine whenever the card is removed/inserted.
Mike
I've used a 1GB PQI, a 2GB normal Sandisk, and a 2GB Sandisk Ultra, and all have worked fine. Except one of the 2GB doesn't like my card reader
i found formatting the card help. Originally it would only be detected if the phone was turned off.
Unfortunately I didn't have a card reader, so used an adapter to format it in my digital camera and have no idea how it formatted it. But it now works everytime without fail!
Thanks Guys...
Sounds like this is fairly common. I've found even since I posted the original question, that provided I just push the card until it clicks, it starts up every time. With my old Axim x50v and Atom, I had to really push the SD cards as far as possible to engage the lock whereas the Dopod clicks just after the edge of the card is past flush. Gently does it seems the rule.
Mike, I appreciate your concern but the clunkiness I think is more related to the card design, having the bumps along one side, than the slot. Also, these things are all rated as hot swappable, so we should all not have to turn off just to change a card. I don't change cards that often, but when I travel, I swap cards a bit as I take a couple cards with music on to listen to while flying.
For all with the issue, I suggest you do as I said in the first paragraph as that seems to be the clue, just press the card until you feel it engage the lock and see what happens.
Thanks all for your feedback. I'll carry on without a visit to service as the phone is terrific and the keyboard (my reason to replace the Atom) is superb.
Best regards,
John
*Solution*
I've also had the same problem, but I think I've figured it out and it's a hardware issue.
If you don't pay attention to how you put the card in, it will go in "crooked". The problem is that the little notch on the side of the microSD won't activate the switch inside the phone that tells it that "the card is in".
The solution is to watch very closely how the card goes in. If you make sure that the side of the microSD card with the notch, goes in straight and flush with the side of the slot, it will recognize it every time.
i've done all the suggestions given on this topic but i still can't get my JasJam, which is about 13hours old, to recognice my microSD card. I've tried a 512mb and a 1gb and no luck... i'm leaving tomorrow and i'm worried if the service center will want to repair it rather than exchange it.
hi fone_fanatic,
if its a fault with the jasjam, you will receive a replacement if its under 30 days old. but the replacement procedure sucks.
Are you in Australia and a Telstra customer? If so, telstra calls imate support to obtain a service reference number, then they will send your pda to mobile phone solutions (MPS) in QLD, they will inspect it and then return a new jasjam to your retail outlet. once the retail outlet receives it they will give you a call to come and collect it.
the warranty is Imate, not telstra, so once it leaves their stores, imate are the ones who do the replacement through Mobile Phone Solutions.
Turn around time, 1 week for my replacement to be couriered to QLD from Melbourne, 5 days turn around time from MPS, 4 days for the new replacement to be couriered back to melbourne, 1 day for me to pick it up. so around 3 weeks.
Now, MPS is closed from Dec 22 to Jan 3 and they are out of JASJAMS, they are awaiting more from imate for warranty replacements (my friend is wating for his replacement) so turn around time could be longer.
life sucks sometimes......
Thanks for that info Jasjamming. I'm in saudi arabia visiting family and friends for the holidays, and the process you just described soounds very similar to the one that was described to me today. BUT... turns out the device is fine, the cards i tried were both Nokia MicroSD cards that came with nokia phones and for some reason the jasjam won't read them. So i bought a 1gig Sandisk and it works fine!
Im having the same issue with my Hermes and a Sandisk 2gb card. It worked fine for a few weeks, but now wont detect at all. Interestingly the screen comes on when the card is inserted or removed - I'll test the card in a reader to see what shows...
A soft reset always seems to work for me
aprmike said:
Im having the same issue with my Hermes and a Sandisk 2gb card. It worked fine for a few weeks, but now wont detect at all. Interestingly the screen comes on when the card is inserted or removed - I'll test the card in a reader to see what shows...
Click to expand...
Click to collapse
There's a thread here http://forum.xda-developers.com/showthread.php?t=294324 which gives some fixes to this problem. The thread is a bit long so it may be best to read from the end backwards.
Also, I believe this problem has been taken care of in the cooked WM6 roms. My SD card hasn't disappeared since upgrading to WM6, but did all the time when with Vodafones UK rom.
broken microSD card?
I have a Sandisk 2GB microSD card, that after a few days stopped working. Whenever I insert it, the device hangs completely. It doesn't matter whether I had turned off the device before inserting. The device stays unresponsive when I eject the card again, I always have to do a soft reset to bring the device back to live. I tried to insert the card carefully (as someone here mentioned the issue with the little notch), but it doesn't make any difference. The card is never recognized, not even after a soft reset. This is obviously very frustrating, as I had just installed a couple of useful apps on the card.
Do I need a new card or is there anything else I could try? ( I do not have a card reader....)
ROM: 1.23.78.3
ROM date: 08/01/06
Radio: 1.06.00.00
it must be the sandisk 2GB microSD cards as i have one to worked great for a week, then stopped working....i formated using the pc and now it is recognized as a 1 GB card, in both phone and pc..
QuachMD said:
I've also had the same problem, but I think I've figured it out and it's a hardware issue.
If you don't pay attention to how you put the card in, it will go in "crooked". The problem is that the little notch on the side of the microSD won't activate the switch inside the phone that tells it that "the card is in".
The solution is to watch very closely how the card goes in. If you make sure that the side of the microSD card with the notch, goes in straight and flush with the side of the slot, it will recognize it every time.
Click to expand...
Click to collapse
Quoted for truth.
my miniSD card keeps crashing.. every time i reformat it.. (just bought it brand new 2 weeks ago.) but it keeps crashing after a little while..
so my girlfriends dad put tomtom 6 on mij sd card last night..
i look in the morning.. and 90% of my mp3 songs wont work anymore.. and my entire map with tomtom in it was gone?????? like wtf??
i got a wizard G3 with the underground edition.. and a 1 GB miniSD card..
reformated it on the computer and with more then 1 program on the phone..
(on the pc was my last time.. (like 2 hours ago...) did not crash so far..)
any1 has a solution for me??
thnx and greetz
where did you buy the card? what brand is it? how did you format it before it crash? is the card size displayed on the PC correct?
i bought it @ norrod in groningen/holland.. brand ... dunno... i used the phone to format it right after i bought it... and yes.. its being displayed normally.. unless it crashes.. cause even on the computer it wont copy things off.
even though.. it crashed again.. all the data was gone.. but at memory it still sees 50 mb used.. :\
god damn it.. i'm going to throw that *#&(#&%(&^)@)(!(@%$& phone out the window :S
I presume Norrod is a name of a shop. Anyway, it seems to be reputable. Unless you can confirm the brand, chances are it may be a faulty one (luck is not on your side). However, the good news is that, it may be a 1 off thing that it may not happen again. There are chances of SD card being wacky if you have your phone hanged and soft reset, which happened to be once when I was messing with my phone. But it never occurred again.
As for formatting on the phone, there are members reporting problems with card formatted on the phone. Since you have formatted on the PC, it ought to solve that problem. Hopefully it won't happen again.
well i had a 512 mb kingston before.. and it crashed 2.. so i threw it away.. cause it had bad sectors.. ( i had that 1 for about 1 year...)
and now this 1 crashes.. i thought mayby it had something to do with the underground edition and the omapclock.. from 180 to 228 or 240..
but it doesn't seem to be.. cause i've been running the last 2 days on normal 180...
I have a 2Gb unbranded memory card and have the same problem, I've managed to find that the memory gets corrupt when the card gets cold (3-4 Deg c), it's fine at room temp.
Got to replace it at some point.
Kingston cards usually have a lifetime guarantee... if you are able to find the package and the card, you may able to get yourself a new card.
hi
Try benchmark tools to evaluate the memory card..
before buying the memory cards..
SD carda
What is it about SD cards and Wizards. If mine takes a slight knock it cant see the card anymore - I have to re-insert it.
I recently got a cheap 2GB card from Hong Kong. Was a load of rubbish. Top tip, dont make the same mistake. Basically had a load of bad sectors and crc write errored all the time.
I have my old 1GB card in at the mo, and apart from the knocking issue (almost certainly a fault with the wizard) it works fine.
Anyone come across the issue where the SD card cant be seen by the phone anymore?
atdavie said:
Anyone come across the issue where the SD card cant be seen by the phone anymore?
Click to expand...
Click to collapse
Hi everyone, I recently started having the same problem with my 1gb mem card, and its starting to annoy me now. Would'nt mind to much if I new what caused it. I havent knocked the phone or played around the the mini sd card.
Quick question, Just wondering whats the largest memory card you can put in a xda mini s.
Thanks
Mark
You guys are the most helpful!
My 16gb sandisk micro sd card is no longer being recognized. I booted my HTC HD2 in Android and mounted the sd card to transfer pics to my pc. Just then I got a call coming in and the phone immediately became unresponsive. I kept getting the force close message but I couldn't stop it (it seemed to be in a loop) So I unsafely disconnected the phone from the pc, took out the battery and rebooted it. It started up in windows, but when I went to check for the sd card it could no longer be found. I pull out the card put it back more than twice, and yet the phone failed to recognize my memory card.
Please help me guys
put the sd card into a card reader, connect to your pc and if if its recognised there, it might be a dying card I've lost 1 16GB and an 8GB in 18 months with my hd2
If the pc recognises the card with no error save the date, reformat to primary partition fat 32 using Easeus free edition, also try the phone without the card
Thank u
Hey ..I really do appreciate the time u took to respond. Funny I was thinking the same thing....I broke my old card reader, now I have to get another another on from Amazon.com. As soon as I can lay my hands on one that is gonna be my first move.
Again, thanks a bunch.
P.S
Sadly I feel like an idiot for not backing up my sd card...(more than 3000 photos on there )
wartibobo said:
You guys are the most helpful!
My 16gb sandisk micro sd card is no longer being recognized. I booted my HTC HD2 in Android and mounted the sd card to transfer pics to my pc. Just then I got a call coming in and the phone immediately became unresponsive. I kept getting the force close message but I couldn't stop it (it seemed to be in a loop) So I unsafely disconnected the phone from the pc, took out the battery and rebooted it. It started up in windows, but when I went to check for the sd card it could no longer be found. I pull out the card put it back more than twice, and yet the phone failed to recognize my memory card.
Please help me guys
Click to expand...
Click to collapse
After trying the SD Card thru a card reader and if it still doesn't work/recognize it - then your mobile (hd2's)windows is corrupted - coz the same happened with me thrice and ultimately I took it back to the HTC service centre and they re installed the windows 6.5 and since then everythings is working normally and there is no problem with the SD Card anymore, but your old card becomes thrash and you'll have to get a new card :0)
johnerz said:
put the sd card into a card reader, connect to your pc and if if its recognised there, it might be a dying card I've lost 1 16GB and an 8GB in 18 months with my hd2
If the pc recognises the card with no error save the date, reformat to primary partition fat 32 using Easeus free edition, also try the phone without the card
Click to expand...
Click to collapse
Same here. Lost a sd-card recently but probably due to my own fault.
The card was difficult to get out of the reader (Yup, it seems there is some tolerance on the size) so I had to use some small tweezers.
I finally managed to get it out without any visual damage but after inserting it in the HD2 it couldn't see it anymore, neither in the cardreader afterwards.
What I think is that I had physically bent the card and broke the connections to the actual memory chip.
Some good advice on memory cards and I can't stress this out enough especially for dedicated photo equipment. Instead of buying a 16GB card buy 2 x 8GB and from a known seller and known brand.
The best and probably worst experience example that I can give is from a couple who were on their honeymoon and lost all of their pictures because of a el-cheapo 8GB memorycard.
For a phone it is something else but I made a custom out of it to create a map on my c-drive called sd-card phone. Ok it is not a every week copy but it is handy to have the data on my pc and on my phone.