i have an O2 XDA.
ROM Version: 3.02.00 GER
ROM Date: 05/27/02
I want to update to the new SER v.12 but have no idea how to do so.
Can anybody please help me?
Read this http://www.xda-developers.com/SER/ first
then, check out the thread/topic about SER 1.2, the thing you probably need/want is XDA-developers-SER-v12.exe, posted somewhere in that topic. Just download and execute, the programme will guide you
enjoy
thank you
but is ist safe to install this rom. i have heard that some xda´s are destroyed if you install it.
what requirements does my xda need if i want to install version 1.2
Flashing ROM is not too dangerous - Radio part (the 1.5MB file) is worse
if you just follow the instructions you should be safe
I just bought the xda yesterday. So if i download the XDA-developers-SER-v1.2.exe to my xda and execute it, its gonna delete the old rom version and upgrade to the new one? I really have to be careful because i don't wanna kill my device.
if i update to ser v.1.2 do i have to update my radio part or can i leave it the old way.
You can download SER1.2 .exe file from http://www.uspocketpcphone.com/temporary.htm
I am not an expert on this thing, but using the exe is not difficult.
It's a lot and alot better the the original ROM for my XDA.
Happy trying. Make sure to follow instruction though.
how do i execute the file once it is on my xda. what am i gonna do next?
You execute it on the computer... you did not read the articles, did you?
i have read the whole article. but why do i execute SER1.2 .exe on my computer and not on the xda? how do i get it on the xda?
please be patient with me....maybe i am retarded
You don't need to do anything on your xda. Executing the file on your pc automatically beams it to Activesync and then installs it on xda. Sounds easy enough...? It is!!
i thank you the utmost!!!i finally got it.ser1.2 is running without any problems and i even got rid of the annoying simlock wich would have cost me 150€.
you are awesome...thanks a lot
I was wondering if it would be possible to take a BA Windows Mobile 6.5 rom and put it on to a Harrier/PPC-6600.
I'm sure this has been asked before, I just haven't found it.
I believe the only differences between the two devices are:
Harrier: BlueAngel:
64 MB ROM 96 MB ROM
No WiFi WiFi
CDMA GSM?
We could remove the WiFi module/software and then we wouldn't need the extra 32MB of ROM (hehe because I'm sure it would take 32MB ).
I have little programming experience (conversational in Flash, a few words in Python) but a fair knowledge of computers and I do have a Harrier so I could test it out(provided there's less than a 50% chance of bricking it) and help out to try to get it working if I had instructions.
Is this possible or should I just stick with WM 2003 SE?
If this question has been asked 3428930480328 times, then I apologize.
Thanks in advance .
It actually has been asked before
Next time you have questions, please post them in the Q&A section. Opening new threads is only for contributions to the forum (roms, kitchens, themes, etc).
To answer your question, no one has been able to port anything over 2003 to the Harrier. There are many major differences aside from the ones that you have already mentioned, which are substantial in the first place. Hope this answers your question.
It can be done you would just need to write a bootloader from scratch, one which can support wince 5.0.
What are the other major substantial differences?
A previous post from GnatGoSplat suggested that the following steps should make a GSM ROM work on a CDMA phone.
To make this work, you would have to:
1. Dump your WM5 ROM.
2. Separate dump into SYS and OEM packages.
3. Extract XIP.
4. Build new XIP with WM6.1 MSXIPKERNEL.
5. Build new IMGFS with new WM6.1 SYS folder.
6. G'Reloc the entire ROM.
7. BuildOS to create a dump.
8. Use Tadzio's tools to create a .bin, then to a .nb file.
9. Flash the .nb file.
This is sure to work, but isn't simple to do. If you're new to ROM cooking in general, you'll have a lot to learn before you can even attempt this. I've been cooking ROMs for 4-months and I still have a lot to learn.
Click to expand...
Click to collapse
I'd really like to get this to work. I have the time to donate and I'm a quick learner.
Are the steps shown above accurate in this context?
michael-knight said:
What are the other major substantial differences?
A previous post from GnatGoSplat suggested that the following steps should make a GSM ROM work on a CDMA phone.
I'd really like to get this to work. I have the time to donate and I'm a quick learner.
Are the steps shown above accurate in this context?
Click to expand...
Click to collapse
Here is the thing... WM5 was never ported to the Harrier, so going from WM2003, you need to do something far substantially different to what you described.
Again, it has not been done. I am not saying it is impossible, but no one has done it.
Update and some questions
After much research and screwing around lol, I attempted to extract a Harrier rom using xda3nbftool.exe . Unfortunately, using the password "0x20040521" gave me the "WARNING: this does not look like a nbf header, possible you provided the wrong password" error.
So, I compared it to a BlueAngel rom that WOULD extract using a hex editor to try and figure out what the difference was, and at the address 0x20040521 (I assumed that's what the "password" meant), there is no difference.
In fact, there are NO differences after 12MB in the file. That means AT LEAST 20MB of a Harrier ROM is IDENTICAL to that of a BlueAngel rom.
It's not like there's even 12 MB worth of differences - there's far less than that. I would guess around 5 or 6 worth. What I said was that 12MB into the file, there are none. In that 12MB, there are similarities still - I'm just too lazy atm to total it up
Anyway, that was just to prove how similar the Harrier is to the BlueAngel for some more support over here on the CDMA side of things (although that 20MB of similarity is probably just Windows Mobile 2003SE ).
My question is, why won't xda3nbftool.exe produce a usable result if the address it looks at is about 6.6 MB after the end of differences and start of 100% similarity?
Also, I have my own Harrier's rom dumped (using d2s, haven't done anything to it after that). How do I turn this into a nk.nbf file or split it into SYS and OEM? I've done much googling. The things I've tried so far have failed.
michael-knight said:
After much research and screwing around lol, I attempted to extract a Harrier rom using xda3nbftool.exe . Unfortunately, using the password "0x20040521" gave me the "WARNING: this does not look like a nbf header, possible you provided the wrong password" error.
So, I compared it to a BlueAngel rom that WOULD extract using a hex editor to try and figure out what the difference was, and at the address 0x20040521 (I assumed that's what the "password" meant), there is no difference.
In fact, there are NO differences after 12MB in the file. That means AT LEAST 20MB of a Harrier ROM is IDENTICAL to that of a BlueAngel rom.
It's not like there's even 12 MB worth of differences - there's far less than that. I would guess around 5 or 6 worth. What I said was that 12MB into the file, there are none. In that 12MB, there are similarities still - I'm just too lazy atm to total it up
Anyway, that was just to prove how similar the Harrier is to the BlueAngel for some more support over here on the CDMA side of things (although that 20MB of similarity is probably just Windows Mobile 2003SE ).
My question is, why won't xda3nbftool.exe produce a usable result if the address it looks at is about 6.6 MB after the end of differences and start of 100% similarity?
Also, I have my own Harrier's rom dumped (using d2s, haven't done anything to it after that). How do I turn this into a nk.nbf file or split it into SYS and OEM? I've done much googling. The things I've tried so far have failed.
Click to expand...
Click to collapse
Since it seems that you are really inclined into making this work... I guess I can try to point you were you can get more info since I don't know much about porting stuff myself
Check in the Himalaya section. There is a porting guide (I believe by Ather90), which goes into a lot of the stuff that you are asking about. Unfortunately for us, cooking nbf files is a lost art and very few people in this forum will be able to help you (Da_G probably being one of them)
michael-knight said:
I was wondering if it would be possible to take a BA Windows Mobile 6.5 rom and put it on to a Harrier/PPC-6600.
I'm sure this has been asked before, I just haven't found it.
I believe the only differences between the two devices are:
Harrier: BlueAngel:
64 MB ROM 96 MB ROM
No WiFi WiFi
CDMA GSM?
We could remove the WiFi module/software and then we wouldn't need the extra 32MB of ROM (hehe because I'm sure it would take 32MB ).
I have little programming experience (conversational in Flash, a few words in Python) but a fair knowledge of computers and I do have a Harrier so I could test it out(provided there's less than a 50% chance of bricking it) and help out to try to get it working if I had instructions.
Is this possible or should I just stick with WM 2003 SE?
If this question has been asked 3428930480328 times, then I apologize.
Thanks in advance .
Click to expand...
Click to collapse
Lots of us waiting for such thing. Good luck!
Sorry to bump the thread, but now my real world things have came to an end with exams being over and such.
I sent a private message at the beginning of this month to Ather90 and Da_G but neither of them have replied. If anyone has any suggestions or advice, please let me know.
michael-knight said:
Sorry to bump the thread, but now my real world things have came to an end with exams being over and such.
I sent a private message at the beginning of this month to Ather90 and Da_G but neither of them have replied. If anyone has any suggestions or advice, please let me know.
Click to expand...
Click to collapse
Da_G has been somewhat absent lately and (my mistake) Ather90 is now Ather. Try to send him a message and see if he replies.
(Edit 07.11.2011: I was able to extract and modify the ROM. Send me a PM after reading the thread if you want the download link.)
Hi everybody,
I am sorry to post this in the General section, but the forum would not let me post to the appropriate threads of the developer forums as apparently I am considered too noob. Anyway ...
I have an Iconia A500 on Acer_A500_4.017.07_EMEA_CUS7, rooted with IconiaRoot.
I am being offered the OTA update to Acer_A500_7.006.01_EMEA_CUS7, but do not want to install because I would loose root.
So I would like to download the ROM from the Acer website and modify it according to the procedure listed here: http://forum.xda-developers.com/showpost.php?p=18202192&postcount=19
I looked into this thread for the download link: http://forum.xda-developers.com/showpost.php?p=14501467&postcount=1
Unfortunately, the link I need is not listed there. Does anybody know the link? Can I somehow extract it myself (I have root access and my A500 offers to update)?
Thanks a lot for your help!
Cheers,
Tim
Is it possible to accept the download and then halt the process once the download is complete? And then to copy the rom to your pc to fiddle with?
Sent from my A500 using xda premium
Hi,
I suspect that the download link might be extractable from the LogCat once I accept the download. But I am not sure if I can cancel the update process completely once I have accepted. So I am hesitant to try.
Cheers,
Tim
I understand if you just want to do it yourself. However, if that isn't the case this rom is all ready to go. Stock with only superuser and busybox installed. I've been using it for a while and it is rock solid.
There is another one too. I didn't try it out but, from the feedback I read, it is also working great for most folks...
Hi, and sorry for replying so late (I was on travel),
thanks a lot for the links, JdgM3NT4L! It is not that I actually _want_ to modify the stock ROM myself, but I have a European version of the A500 (EMEA_CUS7) and am therefore hesitant to just install a ROM based on a US version of the A500. I am not sure if there are actually any significant differences, but do not want to risk it.
I think I found the information on how to extract the path of the update in one of the threads of the developer forum (sorry, I don't remember exactly wherefrom):
3. Start a system update on the A500, and let the download start.
4. Start the Terminal Emulator (vt100), and type su . Then cd to the /cache area.
locate the file name of whats being downloaded. In my case: Acer_A500_1.141.07_4.010.11_COM_GEN1_1311224632952 _461992b1
5. Then on the PC create a full http path and do a download of the URL contructed
using the file name in your cache directory. Example:
http://cdn.acer.futuredial.com/Acer_...2_461992b1.zip
Click to expand...
Click to collapse
I think I will try that. If it works I will report the download link here.
Cheers,
Tim
Hi again,
it worked like a charm. Here is the link:
http://cdn.acer.futuredial.com/Acer_A500_0.000.00_7.006.01_EMEA_CUS7_1316137080209_4c23a157.zip
The MD5 is: B80BB5A64BD694F1D615D4D3DD60C19A
Next I will try to modify the ROM according to these instructions:
http://forum.xda-developers.com/showpost.php?p=18146210&postcount=1
Cheers,
Tim
tim_h said:
Hi again,
it worked like a charm. Here is the link:
http://cdn.acer.futuredial.com/Acer_A500_0.000.00_7.006.01_EMEA_CUS7_1316137080209_4c23a157.zip
The MD5 is: B80BB5A64BD694F1D615D4D3DD60C19A
Next I will try to modify the ROM according to these instructions:
http://forum.xda-developers.com/showpost.php?p=18146210&postcount=1
Cheers,
Tim
Click to expand...
Click to collapse
Glad you got it. Good luck.
Hi again,
ok, I modified the ROM according to kekinash's instructions. It turns out the update script in the EMEA_CUS7 ROM is _not_ identical to the one in the COM_GEN2 version!
In line 27 of the script there is a very long entry starting with "retouch_binaries(...)". A handful of the entries in this long line are different in the EMEA_CUS7 ROM. I therefore replaced the line in kekinash's script with the one from the EMEA_CUS7 ROM. Everything else was identical.
I installed the ROM on my A500 and so far everything seems to work fine. But I will have to test it further to make sure there are no hiccups.
I guess other european users might be interested in the ROM image, but I am not sure if I can upload it or infringe any copyrights by doing so.
Cheers,
Tim
Hi,
My english is not good, so I hope you will understand.. I would be very much interested in your modifyed rom. I read the thread about unpacking and modifying, but I dont understand how to do it, possibly because of my poor english. maybe you couldt upload only the modifyed file, which I should change.
thanks
Udo
Hi Udo,
I will send you a PM with a download link for the modified ROM image. If anybody else would like to have it, please just ask and I will send you the link.
I played around with the ROM for some time. Generally, everything seems to work just fine!
One problem I encountered, though, was that the android web browser crashed badly and I had to reboot the tablet to fix it. Since then it worked fine. Also, Google Maps gave me a strange behaviour at some point: It just exited repeatedly without any error message (no force close). I do not know if these issues are related to the modified ROM image or if their appearance was just a coincidence. If anybody tries the modified ROM, I would be happy about feedback!
Ok, and the following is obvious: I take no responsibility whatsoever for any problems you might encounter when flashing this ROM image. Also, please follow the instructions given in kekinash's thread: http://forum.xda-developers.com/showpost.php?p=18146210&postcount=1
Cheers,
Tim
Hi again,
I updated the thread title so that people looking for the ROM have a chance of finding it.
Here is some more information. The MD5 of the modified ROM image is: D423B84727BFD91429490D319F30998F
In the meantime, I have tested the A500 with this ROM much more. The browser has not exhibited any further problems.
Google Maps continued to act up (kept quitting without error message repeatedly). In the Market, it was listed under "Not Installed", and I had the options "Install" and "Deinstall updates". Both options did not do anything at all. So something was clearly wrong. I still cannot say if this was related to the modified ROM or some other problem. Anyway, here is how I fixed it:
Removed Google Maps with Titanium Backup. Reinstalled from the Market. Converted it to System App again with Titanium Backup. Everything works fine now.
Cheers,
Tim
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
for desktop PCs ! if you have by example W7 in French and want to put it in English - I mean to get English package by update- this will not work if you have an OEM license -this is not allowed!
so is that with OEMs if you want to keep license !
for your PDA you must find an unofficial English ROM only! also a way to write it to the phone BUT for this to work DO NOT use Active Sync!
I can't give you more details because don't have a PDA like yours but this problem is interesting
also subscribed to this topic
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
try a way to write firmware without Active Sync read this post to see you need some way like that
http://forum.xda-developers.com/archive/index.php/t-378907.html
ftp.asus.com/pub/ASUS/IA/P735 doesn't works more you have to find somewere a firmware in English as I see no longer Asus support they say this is deprecated sorry to hear that
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
..i wonder what would ASUS.UnlockLangID.exe do with your problem..
what's this all about:
p525 had similar problem, that could result in NOT real bricking of device after flash(wrong languague version after reset - device seem to be locked on bootloader then). when tool is used before flash, custom lang roms are working properly(interesting then, what this tool does, btw, as it is launched from WM - so, it may be microflasher, or sth like that).
now...i have strong feeling, that warnings you read about flashing different lang rom, may be related to this ridiculous, small, problem.
issue is, that i do not know, if ASUS.UnlockLangID.exe may help with p735, OR if there's version made for p735.
update: i read this again, slowly:
"Cross-language upgrade is not allowed. Please ensure the upgrade tool language is same as the default language of your device."
...they tell you about upgrade TOOL, not rom.
hmmm, so.. what, if you use tool in languague of...ROM?
maybe unlocklangid code is inside flasher, so using proper updater with proper rom is simple solution?
on the other hand - i am making roms for asuses for years, and i never used default flash method - vide usbloader method(and force mode from BL).
i am not going to encourage you to go this way of thinking, but...
AsusP said:
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
Click to expand...
Click to collapse
sorry this is just to test my signature will be back but I do not think Android is an option for your phone it is all about technical specs to port Android on that phone and only Asus will have that
by example I know about a project named Andromnia this is how to use Android on Omnia-WM phone
nice try!! but believe me this is about reverse engineering and does not works for now- no gps/gprs/wifi signal and Android crashes
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used,
EOT/
---
btw, is author of topic here?
pupakota said:
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used, so i found ridiculous whining of ..omnia user here. where were users of omnia, when andoid on that device WAS real?
Now, go and focking buy android bs, you ignored andromnia maker for months, do not whine now.
well, HTC killed everything.
btw, is author of topic here?
Click to expand...
Click to collapse
better focus on topic
To be deleted
tell me, what exactly are you trying to use to flash, abi file, exe file, what is it?
cit:
You can extract ABI file and flash you device through SD card
Click to expand...
Click to collapse
sooo..it seems, that updater BUG is reason, not roms itself here.
funny is, that rom cooking for this machine is quite real, if tools i can see are working.
--------------
upd: ok, so, if i see it right, all you need is to:
fully charge battery,
extact exe, get abi,
copy abi to empty sd card(NOT SHDC!),
go to bootloader(hard to say how - try dpad right + soft reset) and
wait.
when update's done, do hard reset.
--------------
of course, i cannot say at this moment, if whole process is safe, it works fine with zinc device(that seem to have identical flash procedures and SAME cross-lang error when manufacturer way of flashing is used(exe)).
i will try to get more info from my mate asap. cross your fingers, and wait a bit.
here's tool you may try to get abi file from original asus updater EXE file:
http://forum.xda-developers.com/showthread.php?t=368401
if it's not working, there's another one, maybe more universal,
http://forum.xda-developers.com/showthread.php?t=511158
btw, are you from Pakistan?
Thanks all of you for your input.
1 - There is NO AsusUnlockLangID.exe for Asus P735 - do not know why.
The one from P535 or P525 is useless on this phone.
2 - Great point about "same-upgrade-tool-language-possibility" yet the official ROM comes in an .exe file that i do not know how to unpack/hack in order to insert the correct ROM or vice-versa.
Could you provide me with some insight for that?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
4 - I am open to any way of flashing, given it provides the right result so all your advices are welcome.
Yes, the author is very present
@Pupakota
Ok, thank you, i've just read your last answer. I'm gonna try the tool you're talking about and inform you of the result.
PS: No, i'm not from Pakistan though i love the country, are you from there?
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
Click to expand...
Click to collapse
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
Click to expand...
Click to collapse
p750 is different pair of shoes, nothing would be useful in this case. do not try any roms made for different devices(trivia, i know).
-----
i dare to say, that any rom is possible for 735... while searching info, people made every possible build, including 6.5's...ALL chinese :E
rom from exe is exctractable, then fully dumpable, packages are clean and good...
btw, that ABI file is just a renamed rom.bin...
while Activesync method of EXE flashing is wrong, only way of avoiding problem is using SD card flash method then by using that pseudo "abi" file.
dpad to right + softreset should start flash procedure. if not, it may be some key on the right side of the device + soft reset(hard to understand translated chinese...).
but before you decide to try...
could you, AsusP, make photo of bootloader mode?
and please, post link of exe file you were trying to flash, i need it(i mean this english one). for some reason dumped rom from "WWE" version seem to be...hebrew... i really would extract real english rom.
now, only problem is, that besides of one case i did not see any clear information, if sd flash with languague change is safe.
one person wrote it is.
Hi, i'll get back to you ASAP regarding other questions, in the meanwhile here is the link of the firmware in question (that i'm trying to use) :
http://support.asus.com/Download.as...e=P735_FUU_Malaysia.zip#P735_FUU_Malaysia.zip
yup, this one seems to be exactly like one i tried to extract, indeed, it's wwe.
damn, it's OLD
it seems, that cooking custom roms is possible for this device without special problems. new 6.1 or 6.5 should work MUCH faster, than your actual one, or that wwe from asus...
try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?
ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments.
"try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?"
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Sorry, but how do you make photos of the bootloader? Do you mean the update tool?
"ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments."
I have it in the device yes but i don't have the program/CD if that's what you mean. It could be downloaded though from Asus i think...
PS: WWE stands for...?
Sorry, but how do you make photos of the bootloader?
Click to expand...
Click to collapse
Bootloader mode flash(with unpacked from exe rom image on sd card) seem to be Only way to update your device.
I am trying to determine risk linked to this method, so i need photo of LOOK of bootloader mode.
You may enter BL mode by pressing dpad RIGHT and making soft reset, if i am right.
then something should appear, and this is what i want you to photograph it for me(with..camera).
of COURSE, do not put abi image on sd card YET, otherwise you start to update, and we do NOT know yet, if you brick your machine or not.
so, at this moment i just ant to see hot it look like, without flashing, if its typical 525/750 bootloader, not some weird thing, i'd assume, that abi file flashing should not brick machine.
sorry or enigmatic words, cannot explain this easier way.
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Click to expand...
Click to collapse
..so not all 735's have 64 mb ram, i'd say, ok?
look, i do not know nothing about your knowledge level, many users of 750's with 128 mb ram are using 64 mb version of roms(typical noob would have no idea to try any different), this is why i mentioned it...
btw, besides using GanFan-ZincROMXtractor's easier way of obtaining rom file from exe is just using restorator, reshack, or similar tool to extract rom at res 152.
result is identical as using zincromextractor, though name of file must be set manually - it is Mars_G4.abi (though, it is not..real abi file, but it doesn't matter).
WWE stands for...?
Click to expand...
Click to collapse
english rom...
what exactly are you trying to use to flash, abi file, exe file, what is it?
xuanmei said:
what exactly are you trying to use to flash, abi file, exe file, what is it?
Click to expand...
Click to collapse
hey, do you have account on one of chinese pda sites?
could you download and post here any 735 kitchen for me, sir?
i'd like to have a look onto it, but for some reason i am not able to register.
WWE World Wide English - got it.
Pupakota thanks a lot for your efforts, i've had a busy schedule these days, i'll paste you all the info soon.
My knowledge level is basic yet i have some experience of programing from before and i'm very keen to learn about this, more than just using the system.