I tried to downgrade my 5600 to wm2003se that was the original os and I had upgraded it to wm6 but want to go back and since I didnt make a backup of the rom I used the updater from Orange to try and downgrade it after following some instructions I saw on a website.
But now the phone just show the orange uk startup screen then goes into the bootloader I tried using the imate wm2003se update it updated successful but when I start the phone a get the imate startup screen and then it goes into the bootloader again. Another thing is that the updaters when I ran them (I reran the orange uk updater so the orange rom is now on the phone again) both show that there was no rom loaded to the phone, all the information the phone model and the other info are completely blank.
I've tried looking up how to fix it but the only solution all the sites give me I cant do cause I dont have a sd card and even if I did my computer cant read sd cards and I dont have a sd card reader either.
I'm sure your wondering about the version of my bootloader it version 1.x, sorry I cant be more specific cause the phone screen does work properly and the only way to get it to show properly most of the time is to push the end call button up and hold it there. A solution to that would appreciated as well but right now I'm more wanting a solution for the bootloader problem I'm having.
Hi all,
I wouldn't consider myself a complete noob I owned several HTC devices before going to the dark side (I bought an iphone). My sis b/f gave me his xda orbit 2. I thought that i had CID unlocked it using pofs awesome app. However i tried to flash the HTC WM6 rom to it an it kept getting stuck on the HTC splash screen. Since then it seems to have gone down hill a little and i only seem to be able to get to the bootloader screen, even this though doesn't come up with the USB symbol when plugged in, I have also tried flashing from the SD card by renaming the .nbh file as instructed within these forums... One thing I have noticed is that the screen before attempting to flash the rom kept fading out. Does anyone have any ideas how I can get it back to a working state?
Thanks in advance
Dan
Hi all,
I have a iMate SP3 here that I'm trying to get working for a coworker. Long story short they did this once before and I re-flashed it with some ROM (no clue which one) to get it working. Well, they broke it again and it's at the bootloader screen.
Problem is, I have no clue what CID lock is on the phone. The SPL is 1.01.0107 and I can't really find any mention of it. The phone doesn't boot any further than the bootloader screen and needs to be flashed, but I'm not sure with what. So far it's rejected all the ROMs I've tried.
Info 2 in MTTY gives me the output below:
HTCSCDL___01 4š«@HTCE
Can anyone tell me what I can flash this phone with to get something booting on it again? Thanks
please visit ftp://ftp.clubimate.com
choose the appropriate rom for you
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
hi there, it seems that im missing my image version SPL-1.28.0000 for the original rom for polaris.
is there any way to get the same image version? cz im stuck into the bootloader screen and tried to flash original rom 1.28.415.2 it flashed 100% but went back to bootload!!
am i missing something?
when flashing and the update tell that its gonna replace ur old image with the new one, for my devise it doesnt show any old image ... its just put the new one that will be upgraded to.
i know that it seems confusing thats why im asking !!! plz help ... its my second day stuck in the bootload screen with no help
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader
Try this...
http://forum.xda-developers.com/showthread.php?t=425922
edit...:Sorry i see you know the thread
I have had a similar prob and and try mtty and problem are gone
and have you hard spl flashed before you flashed any other roms..??
Good Luck
thanx, yeah i did almost everything
the bootload stucking happened alone without me doing anything b4, i just left the phone as always and came back to find it stuck. so first i unplugged the battery and softreset and tried to hard reset but nothing happened.
second i searched the foum and i tried the solution in the thread u gave and no errors poped-up and i thought thats it but it wasnt and the devise restarted to bootload.
then i tried to load the original rom b4 unlocking (hard spl) cz i thought that its is the original so why do i need to unlock my device .... something went wrong cz active sync didnt work ... so i went to hard spl and couldnt make it anymore .... when hard spl process is launched it give error 262 i think.
but now the original rom that i spoke about earlier is processing to 100% but with no effect ...
hope im clear ... what do u think?