help me:
I have a Imate Jas-Jar windows mobile 2005. A new version of GPS Nav-N-Go was released for WM 2005 I installed it and it doesn't work! It doesn't recognize my GPS on the Parrot CK3300.
I talked with the Nav-N-Go developers and they told me that the Nav-N-Go works with 9 GPS antenna's. It seems to me that the problem is in the definition of a communication "COM-port".
Please help me to solve this problem. Is there a way to define a "COM-port" for GPS in the CK3300
jorge
Related
Hello,
did anybody know the settings in TomTom GPS for the Navman 4100 / 4400 Bluetooth ?
The connection between XDA II and Navman works now with the widcomm Bluetooth Software. The Microsoft Bluetooth Stack did not bond the Navman.
But I don’t know the settings to receive a gps signal.
:?
im gona buy a xda 2. does it work with tomtom2 navigator?
Yes, it works with TomTom !!!
But the question is: does it works with your gps reciever?
:roll:
Hi all!
I found a strange problem reguarding bluetooth software conflicts beetween Qtek2020's Microsoft Bluetooth Stack and the Widcomm 1.4.1 (BluetoothGPS.cab) Stack.
It means.
Without the Widcomm Stack installed I am able to syncronize via Bluetooth with ActiveSync (com6).
And I moreover can surf the web trough my Qtek GPRS connection via Bluetooth. And that's perfect.
But.
With the Widcomm Stack installed I am still able to syncronize via Bluetooth with ActiveSync (on com6) but I loose the bluetooth-modem capacity!
I own a Trust180 Bluetooth/USB adapter.
I need the Widcomm Stack only to use my Fortuna Clip-On GPS and I will not need it anymore if I could find the way to use it with Qtek-Microsoft Bluetooth Stack, but I have not found the way to do it yet.
So I think I could only surf the registry to find the answer to let both stacks work together, is it possible?
Did anybody have the same problem?
Did anybody find the answer?
Thanks in advance!
Giuseppe
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
XDA 2i Widcomm and Fortuna
I'm having the same problem with a fortuna clip on bluetooth gps and an XDA2i--for some reason that build of the widcomm stack (3900) doesn't work, yet earlier versions, such as that shipped with the XDA2s, appear to work fine--does anyone know where to find a version of the widcomm bluetooth stack from broadcom newer than 3900?
paulfanner said:
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
Click to expand...
Click to collapse
Hi Paul,
thanks for your reply, I know my Clip-On should work together with every software for on road navigation...but...I unfortunately need OziExplorer for my off-road navigation and...OziExplorer need a com7 port.
That's all :wink:
I think I'll try Franson's tools: GPSGate & something else as I read here http://www.franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020
I wouldn't like to hardreset my device again...I lost the number of my hardresets.
Thank you anywhere
Giuseppe
Hi giuseppe,I hate broadcom stack too, after many hresets, i thinks there is no way to solve this and other bugs, like the serial modem bluetooth connection.
The only winning move is to sell our 2020i and buy magician
Bye
Luca
Hi Luca, don't surrender, it can work!
I simply followed this http://franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020 .
Now I am able to use my Fortuna GPS and my BT Motorola HS805 at the same time. And morover I am still using my Qtek's BT modem ability.
I payed 30 euros for Franson GPS Gate, but it solved my problems.
I am now trying to let ActiveSync work via Bluetooth because it's the only ability I lost. :?
Bye, thank You for your post,
Don't surrender!
Giuseppe
After trying at least 10 different conbinations of rom/bt stack/patch, finally get bt GPS and A2DP headset to co-exist on my XDA II. I want to thank the brains of this forum...
BTW, Here is the first impression:
1.A2DP functioning well.
2.AVRCP also works!
3.Sound quality is great, no dropping/cut-off.
4.Machine is a bit slower when streaming music.
5.Occational re-bonding of the BT GPS receiver needed, but painless, takes less than a minute.
Still enjoying/testing...
I'm using i-Mate PPCPE (XDA II), Moto HT-820 headset, Belkin(Fortuna?) BT GPS receiver. WM5 ROM 2.01a.32WWE (dl from buzzdev), Radio 1.18.00...
Thanks again guys!
WOW, please tel us how?
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Re: WOW, please tel us how?
MrGucciman said:
Hello cpz21,
I have been searching for a solution for awhile now and keep hitting brick walls.
Could you please tell us the method and sources you used.
I am in need of Bonding my Imate xdaii to my Blueant x5 Headset and from my understanding I need a whole lot of upgrades to do so.
My specs are;
I-mate xdaii
PPC Version 4.20.0
ROM Version 1.66.00WWE
Radio Version 1.10.00
Can this be done?
Thanks
Click to expand...
Click to collapse
If you only need stereo headset, ROM1.72WWE will be okay, just install widcomm BT stack (http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=73), you don't need wm5.
If you have BT GPS as well, you need to upgrade to wm5, everything works; or you can use xda2jojo's WM2003seUpgrade (http://forum.xda-developers.com/vie...days=0&postorder=asc&highlight=2003se&start=0), but you have to switch between MS BT stack and wicomm BT stack to use stereo headset and GPS.
good luck.
Hi All.
I have NOKIA LD-3W GPS, Qtek 9100 with ROM 2.17.7.2 CSY and installed WayFinder. I do pair Qtek and NOKIA LD-3W GPS, create outgouing COM port, disable secure connection. Run WayFinder a cannot show created COM port in WayFinder GPS settings.
WayFinder not found GPS receiver....
I read http://forum.xda-developers.com/viewtopic.php?t=53840&highlight=ld3w but not help me.
Help me anybody?
Thanks for any ideas. :roll:
Solved....
Now this GPS receiver with WM5 me working :lol:
Hi,
I'm looking to find out if anyone knows if the HTC Tytn will wirk fine with Navigon 5 or 6 and than with the GNS 5843 GPS/TMC BT Receiver.
Can't find any info on this combination.
THX
I would safely say that any navigation software that is for a pda device and a compatable bluetooth gps receiver will work just fine. I am not using your specific software or gps receiver, but with tomtom software and a bluetooth gps receiver I find the device works as a great navigator.
Okay THX a lot for the reply. I still wonder about the combination of Navigon Mobile Navigator and the GNS 5843 TMC/GPS receiver.
I know TomTom works but I prefer Navigon and on an iPAQ 2790 the mentioned post and combination worked perfectly.
But I don't know the TyTn very well.