Database Users

only 200mhz?

hi everybody.
i am thinking about to buy a htc wizard (qtek 9100).
i now noticed that the qtek s110 has 416mhz, but the 9100 only 200.
is there a big difference between the two, or is the 200mhz processor as fast as the one with 416?
thx

the Wizard has a differend type of processor than the s110. Its kind of like Intel vs AMD. The mhz doesn't mean it is slower.

I think the wizard is slightly quicker then the intel one but what slows it down is lack of programs using the texas instruments processor extensions and the
non persistant program memory which slows the program loading times quite a lot.
but u get more use out of your batt as it doesnt reserve 30% batt life for ram.

Does the universal lose everything if the battery goes to 0% ? I thought the wizard and the universal were both the same in that they retained their status even on no power ?

knowsleyroader: you are correct. They use persistent memory that will be retained without power. They're slower as a result, but the benefit is what is considered a marginal battery life improvement.
All should read this:
http://blogs.msdn.com/windowsmobile/archive/2005/11/17/494177.aspx
Wizard is generally considered fine for cpu power. I've never used it, but most seem to say it's fine on everything except Skype (which some have found ok). Since you can't get another device with WM5 of the Magician's size (I think), the Wizard is pretty much your only choice right now.
Unless you've got a 700w
V

Pocket Quake runs at a respectable 8.5fps (default settings), and 14.5 (optiomized settings, no sound). I have the Spb Benchmarks (overview below) if you want them.
I find the device slow, but it is not the processor that really slows it down, it is the IO.
On the keeps memory on power-off. I have read reports of the battery needing some fiddling inorder to recharge the battery if you let it run flat.
Spb Benchmark index 232.4 (iPAQ 3650 scored 1000)
CPU index 927.45 (iPAQ 3650 scored 1000)
File system index 94.72 (iPAQ 3650 scored 1000)
Graphics index 2862.38 (iPAQ 3650 scored 1000)
Platform index 273.92 (iPAQ 3650 scored 1000)

intel vs AMD. The mhz doesn't mean it is slower
Click to expand...
Click to collapse
speed is everything my friend
well i had a xda2 mini s had it not even a week and took it back to the o2 shop . and told the guy that the phone is far to slow for what i use it for . so i changed it for a xda2i . and now i am very happy with it never crashes and does not hang up while changing screens like the mini .
intel (r) pxa275
speed 520mhz
128mb ram
thats the speed of my 2i . in my eyes the mini is a phone and just a phone . it cant handle being a pda also . it just dont have the power . and as for the slide out keypad what a joke . my one was starting to get slack in no time . i just could not imagine how this phone would look 6 months down the line of day to day use . be smart and get something that works . ok it looks good but its slooooow
my 0.002 pence worth

musiccube said:
intel vs AMD. The mhz doesn't mean it is slower
Click to expand...
Click to collapse
speed is everything my friend
Click to expand...
Click to collapse
Speed may well be to you, personally i find the functionality more important, but the MHz quote says that processor speed doesn't mean the device operation is slower. it uses a different architecture so the clock speed doesn't need to be as high for the same output (CPS would be a better measure of cpu performance IMO then all processors would be on the same scoresheet regardless of technology or clockspeed)

http://forum.xda-developers.com/posting.php?mode=reply&t
Sorry to drag this off topic a little, but I was reading the XDA-developer encylopedia, which gives claims duel core. Is it? And does duel core in the mobile world mean the same as in the desktop?
Thanks, Mike

Having owned quite a number of Pocket PCs and Windows Mobile devices over the years I have come across this sort of conversation a number of times.
The real point from my experience is that QVGA devices such as the Wizard / Mini S do not need the speed of say a VGA device such as the Exec / HP hx4705. Speed is needed on VGA devices due to the quantity of pixels that need to be updated on the screen. My HP 2210 QVGA device was quicker in a number of ways than my hx4705 and there latter machine was quoted to have more than a 50% speed increase.
I do notice my Wizard slow a little using PocketInformant when I need to filter or search. That to me looks like processor speed. But for that I get a good battery life while using the phone side quite a bit each day (it's a work sim card in there, fully paid for). My Exec however is quicker at data sorting, filtering etc. but relatively slow to update the screen, rotate the screen etc. Exactly the same as my hx4705, also VGA running the last version of Windows Mobile.
I have no reservation in suggesting the Wizard to people wanting to do a bit of everything. I haven't tried playing a film on it yet but I would expect that to be ok as long as the film is encoded to suite. But power users would likely look to either a more powerful solo device or have a second device to compliment it.
I was just lucky that O2 in the UK are offering such rediculous prices for both the Wizard and the Exec that I could get both.

acetuk said:
Wizard / Mini S do not need the speed of say a VGA device such as the
of everything. I haven't tried playing a film on it yet but I would expect that
Click to expand...
Click to collapse
Except the magican (a model down, sports the same size screen) is 400MHz.

That's a very interesting point. But is it the same make of processor? I expect it was running a Xscale processor.
It might well be that HTC decided / realised that for a phone edition model with a small QVGA screen pure raw speed is not really needed. By moving to the TI processor they kept to about the same speed for most real world scenarios (loading programs, looking up contacts, making calls and so on) and then gained elsewhere (received good battery life etc).
All I can really say is that my wizard is faster in certain core areas of these devices (screen redrawing for example) but loses out on pure raw data processing. But as I said at the start of this I don't read the benchmarks. My wizard is a fraction of a second slower than my exec at loading PocketInformant which I can live with.
I think the wizard is positioned correctly after one week of using it. But then I never used the predecessor so I can't compare the two. Having come from one of the fastest non-phone devices on the market though I can't say I'm really noticing the slowness of these devices. Not out in the real world when I am using them.
Now, I just have to sell on my hx4705. And to say that must mean I am happy!
Thanks for the interesting conversation - I'm new here but already feel at home.

well, but I heard alot that the MDAcII with its TI CPU is too slow to open large documents and so is useless for bussiness and that seems to be a problem of the CPU-power!

I've been using a Blue Angel for the last year and actually think that the Wizard is faster for my own use, as a Phone first and PDA second the market that IMHO opinion the Wizard is actually aimed at.
I use SPB to close down apps properly that I use infrequently (word/Excel etc..) and just minimize apps that I use frequently such as Outlook/Phone and my Wizard flies. Even TomTom5 appears to run much faster than on Blue Angel with route replanning completing in the blink of an eye.
Fair enough if you are asking it to run intensive apps a 2i or universal will be faster but those devices are more PDA than Phone whereas the Wizard is the reverse.
For reference mine is an O2 UK supplied XDA Mini S branded device on standard O2 UK rom with all O2 active rubbish removed. Even the battery life beats my SE k750i mobile it has just replaced!

wilesd said:
I've been using a Blue Angel for the last year and actually think that the Wizard is faster for my own use, as a Phone first and PDA second the market that IMHO opinion the Wizard is actually aimed at.
Click to expand...
Click to collapse
Ooh so I'm not alone!
Same here, especially for browsing heavy sites. The BA would take ages formatting the pages, the Wizard also takes time but less. Interface seems faster to me too (once apps loaded - loading time is dependent on the new memory architecture).
Browsing photos with Resco photo explorer is about the same.
The only point on where I can see big difference is video playback. I haven't been able to play a single video without hangups yet, either by using the same ones than I had on the BA or by trying to reencode differently (using TCPMP). A video that would play at 125% on the BA runs maybe at 75-80%. That annoys me because I would like to use it to show videos to people as a demo, which obviously looks less serious if not smooth.
I wonder if that is TCPMP-related or OMAP-related...
BUT, battery life is great!!

Hey guys, i'm considering 'upgrading'(?) from an xda2i to the mini s, and i've noticed you talking about different programs running faster/slower on either device. Was wondering if you could give me a 'rule of thumb' as to which programs would have loss performance in the mini s compared the the 2i?
Thanks

kilrah said:
wilesd said:
I've been using a Blue Angel for the last year and actually think that the Wizard is faster for my own use, as a Phone first and PDA second the market that IMHO opinion the Wizard is actually aimed at.
Click to expand...
Click to collapse
Ooh so I'm not alone!
Same here, especially for browsing heavy sites. The BA would take ages formatting the pages, the Wizard also takes time but less. Interface seems faster to me too (once apps loaded - loading time is dependent on the new memory architecture).
Browsing photos with Resco photo explorer is about the same.
The only point on where I can see big difference is video playback. I haven't been able to play a single video without hangups yet, either by using the same ones than I had on the BA or by trying to reencode differently (using TCPMP). A video that would play at 125% on the BA runs maybe at 75-80%. That annoys me because I would like to use it to show videos to people as a demo, which obviously looks less serious if not smooth.
I wonder if that is TCPMP-related or OMAP-related...
BUT, battery life is great!!
Click to expand...
Click to collapse
Similar experience here - my former PDA is a Dell X50V with a 624Mhz processor and PocketPC 2003SE, at times it's surprisingly sluggish. However, the wizard is more responsive - although I miss the VGA screen in general I prefer the Wizard for browsing.
My only complaint about the processor so far (I haven't tried gaming) is that it's not much good for playing back wmvs. I've not experimented much with it but this is an area where the X50V is very good - it can play highish bitrate WMVs no sweat. The Wizard seems to struggle, even with lower resolution and bitrate wmvs it stutters.
John

About this, how to overclock the wizard ... ??!!

musiccube said:
intel (r) pxa275
speed 520mhz
128mb ram
thats the speed of my 2i .....
Click to expand...
Click to collapse
The Universal has all that too. But, guess what, the overall experience of that "flagship" is slower than the Wizard. Which goes to show, the CPU clock speed has b*gger all to do with how a device performs in the real world.

Once Again: Magician Or Wizard?

Hi There All!
Get back from a longer break, because my magician is in service.
My friend called me last day and offered a Wizard (T-mobile Vario) to me.
I have read that the Wizard has a slower processor, but it is a dual cored think or what....I heard it is like the processors in the laptop (ex.: centrino has 1.6 GHz but it is 2.x GHz.)
So all guys who have tried it, and magician too, please post the experiments.
I want to use it for/to:
- WiFi
- MP3 Playback
- Some video playback maybe
- Read E-books/ Adobe PDFs
- Play with some games (mainly high quality games such as Arvale, Everquest, Myst etc.)
- Take pictures/videos
So please post your opinions, about Wizard, and tells me which one of this will be slower, on Wizard.
Thanks, and Cheers

OK, so it's not dual core, hell no.
Well, OK, it is. But one core is for the radio stuff, and is not used in application processing.
It is a different /type/ of processor though, so it's not really fair to compare it to the X-scale in the magician (I think it's from Texas Instruments?). I hear it is a mite slower though, so I don't know.
Also: it has Windows Mobile 5, so you can get your A2DP on from any app, not just WMP.
Me, I'd go for it in a shot. Hell, if Orange UK did one I'd have one already, those odd kids.

bobgorila said:
OK, so it's not dual core, hell no.
Well, OK, it is. But one core is for the radio stuff, and is not used in application processing.
It is a different /type/ of processor though, so it's not really fair to compare it to the X-scale in the magician (I think it's from Texas Instruments?). I hear it is a mite slower though, so I don't know.
Also: it has Windows Mobile 5, so you can get your A2DP on from any app, not just WMP.
Me, I'd go for it in a shot. Hell, if Orange UK did one I'd have one already, those odd kids.
Click to expand...
Click to collapse
So you say OMAP is slower for multimedia (MP3, Video). And for the other ones?

Nope, I didn't. Though the wiki article on the Wizard certainly seems to suggest that.
I'd be interested to know how it fares with the sorts of files I view, and now that TCPMP is at 0.72 (the test were done with 0.50).
Certainly the implication is that it is not so hot for multi-tasking, which is a shame. My Magician seems to carry on almost as normal while I play music of various bitrates and codecs, if the Wizard did not then it would be a big minus.
Also: the Hermes has a 300Mhz Samsung chip, I wonder how it stacks up against these two? That thing certainly is looking like a dream phone right now.

The Omap 850 definately is slower than the XScale in the Magician. This is what many people state and what Benchmarks prove. Also the slow flash memory and WM5 makes a big difference. Don't expect the speed of a Magician with any of the HTC WM5 devices.
The Samsung CPU in the Hermes has about the performance as the XScale of the Magician.

TyTN/Hermes DOES NOT underperform.

What on earth is going on? I know where talking about 2 different Moblie operating Systems and devices, but he performance difference explains alot in terms of why the TyTN/Hermes....is underperforming in the Video department, especially with TCPMP.
If this is the case with Video, which can easily be measured for performance, how much more are these Hermes devices lacking in other departments.
Apparently the developers of TCPMP at corecodec are aware of this problem, but it seems to be more related to the Hermes itself.
Below are a few screenshots of 2 different Pocket PCs using the same Samsung 400 Mhz CPU but with completely different results.
Also, I would not necessariliy pay the figures too much mind if the Video performance was at least as good as on the Vario I or the HTC Prophet, but it is not IMHO.
Tell me what you guys think. Maybe I've got it all wrong.
I did have it at all wrong. please read up about the ATI thingy in other post.

I'm dissapointed with the speed too. I'm wondering if it's got anything to do with the 32-bit bus used?

bydandie said:
I'm dissapointed with the speed too. I'm wondering if it's got anything to do with the 32-bit bus used?
Click to expand...
Click to collapse
Hi bydandie.
You may have a point, but then I'm not having any other speed issues. What were the bus speeds on the Universal and Wizard? Do you know? Also;
Samsung (R)2442A [Hermes]
Samsung S3C2440 [HP iPAQ rx3715]
Both run @ 400Mhz
but as we can they don't appear to be identical processors. I'll google around for some info as I'm no expert, but it may still be ROM specific.
What Hermes variant have you got again? and what ROM version?

I was hoping the upgraded 200 extra mhz over the Vario, would be good, apprently it doesn't sound like the video playback is that much better. What is the video playback like ?

This is down to the Hermes not being able to utilise the ATI acceleration technology (can't remember the actual name) properly.
If you try playing a video in TCPMP with the acceleration on, on the Hermes, you will find that the screen shutters like mad!
So you can only use raw video mode for now, which is pretty slow. (But plenty quick enough for 320x240 videos, i.e. most "pocket pr0n")

mackaby007 said:
bydandie said:
I'm dissapointed with the speed too. I'm wondering if it's got anything to do with the 32-bit bus used?
Click to expand...
Click to collapse
Hi bydandie.
You may have a point, but then I'm not having any other speed issues. What were the bus speeds on the Universal and Wizard? Do you know? Also;
Samsung (R)2442A [Hermes]
Samsung S3C2440 [HP iPAQ rx3715]
Both run @ 400Mhz
but as we can they don't appear to be identical processors. I'll google around for some info as I'm no expert, but it may still be ROM specific.
What Hermes variant have you got again? and what ROM version?
Click to expand...
Click to collapse
The Wizard was 16-bit. I'm using the v1605 but with the HTC ROM.

mackaby007 said:
Hi bydandie.
You may have a point, but then I'm not having any other speed issues. What were the bus speeds on the Universal and Wizard? Do you know? Also;
Samsung (R)2442A [Hermes]
Samsung S3C2440 [HP iPAQ rx3715]
Both run @ 400Mhz
but as we can they don't appear to be identical processors. I'll google around for some info as I'm no expert, but it may still be ROM specific.
What Hermes variant have you got again? and what ROM version?
Click to expand...
Click to collapse
Both run at the same CPU speed, but have very different operating systems. According to the screen shot in the first post, the rx3700 tested is running pocket pc 4.21 (2003 second edition IIRC), whereas the Hermes is running Windows Mobile 5. I would guess the rx3700 doesn't have the slowdown related to persistant storage (for example), using some form of flash for memory is going to be slower than RAM.

I have a Eten M600 on WM5 and the samsung 400 proc. the TyTN use also the 400 proc.
When i compare them both on speed then my Eten is much faster in every way. much more responsive. opening and rendering screens.
Altough i prefer my TyTN over the M600, the build-hardware and sound is much better.
I guess it must be the ROM that isn't perfect yet ( and it isn't perfect yet for sure).

I have a Eten M600 on WM5 and the samsung 400 proc. the TyTN use also the 400 proc.
When i compare them both on speed then my Eten is much faster in every way. much more responsive. opening and rendering screens.
Altough i prefer my TyTN over the M600, the build-hardware and sound is much better.
I guess it must be the ROM that isn't perfect yet ( and it isn't perfect yet for sure).

ROM or CPU lacking?
luminus said:
I have a Eten M600 on WM5 and the samsung 400 proc. the TyTN use also the 400 proc.
When i compare them both on speed then my Eten is much faster in every way. much more responsive. opening and rendering screens.
Altough i prefer my TyTN over the M600, the build-hardware and sound is much better.
I guess it must be the ROM that isn't perfect yet ( and it isn't perfect yet for sure).
Click to expand...
Click to collapse
Thanks for your input guys. Luminus your point sounds like there may be hope for us all yet, but having said that, bydandie has switched to the TyTN ROM and I have moved to the I-mate ROM and admittedly we have both both probably experienced some improvements over the ROMs our devices shipped with but the Video playback issue remains, albeit slightly improved too (therefore indicative of being software related).
I spent several hours reading up on the SC32442A Samsung processor and I have to admit, whilst not having enough knowledge to fully understand all the technicalities, it seems that the CPU in the Hermes is one serious 'dude' which is not being used to its Full potential. Apparently its just as quick as a Xscale 520MHz CPU!
I can believe it due to the responsiveness of my device in general (with I-mate ROM), but its just not evident in the Videoplayback department.
I've also tried many differently encoded movie clips like its native MP4 and Divx etc but only negligable differences. I now believe, as posted by bydandie (I think), that its due to the ATI acceleration chip/software not doing what it is supposed and that maybe HTC should look into this as the different ROMs don't seem to make any worthwhile difference in this particular department.
For anyone who's reading this for the first time let me clarify that playback speed is acceptable to watch any well encoded movie (320x240 @ up to 768 kbps) but pausing, forwarding etc then resuming playback is where the problems occurr (for me anyhow). Benchmarking shows that the Wizard (overclocked @240MHz) easily outperforms the Hermes, but not in everything else. Though admittedly I also find the overclocked HTC Prophet @240MHz more responsive all round! Again this seems to indicate that acceleration support is missing across the border.
For the record: I no longer believe TCPMP is in any way at fault. It performs outstandingly on every other device I have ever installed it on, including Samsungs i300 which also had a 400MHz CPU and benchmarked the same videos at well over 300% compared to 120% - 180% were getting on the Hermes!
I give up for now, the problem is way beyond me but hopefully not far off from being found.

Samsung CPU
I'd be interested where you read about this CPU.
It's based on ARMv4 dating back to 2002 and as such is functionally very poor in comparison to the ARMv5 Xscale platforms. This is why it won't allow the current versions of iPlay to operate. It's also unlikely to have the xscale power and performance scaling capabilities as it pre-dated Xscale.
In practise the only thing that has affected me is iplay.
I have just upgraded my 2750 to WM5.
Contrary to what I was told when I purchased the upgrade (many months ago) it is much much faster than the tytn in every respect. It also seems more stable.
For day to day work though - I don't use the TyTN for video - ipod and Archos cover that for me - I find performance very adequate though.
Paul.

Re: Samsung CPU
pgamble said:
I'd be interested where you read about this CPU.
It's based on ARMv4 dating back to 2002 and as such is functionally very poor in comparison to the ARMv5 Xscale platforms. This is why it won't allow the current versions of iPlay to operate. It's also unlikely to have the xscale power and performance scaling capabilities as it pre-dated Xscale.
In practise the only thing that has affected me is iplay.
I have just upgraded my 2750 to WM5.
Contrary to what I was told when I purchased the upgrade (many months ago) it is much much faster than the tytn in every respect. It also seems more stable.
For day to day work though - I don't use the TyTN for video - ipod and Archos cover that for me - I find performance very adequate though.
Paul.
Click to expand...
Click to collapse
Hi again pgamble. I remember you answered an earlier post of mine regarding the CPU. It seems you understand more on these CPUs than I do.
I've provided the linl below to where I read all about the 2442 CPUs (they seem to have variants of it). Hope you understand it better than me. Please let us know what you make of it. Bydandie mentioned that the Hermes uses a 32bit Bus as opposed to the 16 bit Bus used on the first Vario. Do you know if this would negatively or positively affect the speed of data? I would have thought positive, but then I don't fully understand all the technical jargon in the provided link which will probably explain how the technology is utilised.
I hope it doesn't have to share too much of the available data bus/ bandwidth (whatever it is), thus bottlenecking the CPU. I still think at this time its related to the acceleration technology of the ATI Imageon.
http://www.samsung.com/products/sem...ationProcessor/ARM9Series/SC32442/SC32442.htm

http://forum.xda-developers.com/viewtopic.php?t=61370 :wink:

Hermes is a mini-powerhouse!!
Sorry I should have elaborated in that last post which directs you to more accurate information since I started this thread. The Hermes is in fact a mini-powerhouse and even beats the Universal for playback performance under the right conditions.

It's great that the Hermes is powerfull and beats the Universal under the "right conditions"!
But under the "right conditions" DOS beats Windows, it's just a matter on how you compare... :wink:
However, TCPMP still doesn't work as it should on the Hermes. *Standing by for new ROM*

Moskus said:
It's great that the Hermes is powerfull and beats the Universal under the "right conditions"!
But under the "right conditions" DOS beats Windows, it's just a matter on how you compare... :wink:
However, TCPMP still doesn't work as it should on the Hermes. *Standing by for new ROM*
Click to expand...
Click to collapse
The ROM ive settled on (imate) will play back no problems with rawframebuffer set for the video output. Admittedly id prefer to use the ATI acceleration but this temporary measure is still ok for me. Sound playback has improved as it does not stutter to a halt after a pause or skip. (for the record im using a 2pass Xvid encoded avi file with 128kbps MP3 audio) this is evident in both the imate and dopod roms......but not the updated HTC rom.

ATI & The Core Player v1.0
I agree with you both (last 2 posts), but from further investigations, it seems that the problem is not related to the ROM either but onlt to the ATI decoder. I've e-mailed ATI in the hope that they can enlighten or help us all. :lol: Fat chance of that I know, but in the ATI Hanheld Interface, there is a version number v2.30.......maybe that can somehow be updated directly if ATI will offer some support or through a ROM update (though it does seem like firmware) .
Anyway all said and done I'm going to keep looking until I find a way to get that bloody decoder to work permanently as it seriously improves all video formats by at least 100% in benchmarking, which means no dropped frames for High Quality encoded files.
Alternatively keep an eye out for the new TCPMP player (The Core Player v1.0) which will hopefully address all these issues within the coming weeks/months. :wink:

Yer i can imagine a ROM update may include an ATI-written updater within it which will sort out the problems. It DOES sound like something that can be fixed though so hopefully soon we will all have it working correctly. :lol:

So, AKU3.3 ROM did fix the problem with ATI, where you had screen going crazy, but there are decoding artefacts which I belive are down to TCPMP/Coreplayer to fix.

schriss said:
So, AKU3.3 ROM did fix the problem with ATI, where you had screen going crazy, but there are decoding artefacts which I belive are down to TCPMP/Coreplayer to fix.
Click to expand...
Click to collapse
Yer, if you look on the coreplayer forum there is a recommended encoding rate etc... but ive still watched videos no problem even using a different encoding rate.

Speed / Performance Comparison w/ Magician

I'm looking to replace my Magician with the Trinity. I've had some good times with my Magician and have been extremely happy with it. The Trinity has everything I want in an upgrade, but I'm worried about its processor compared to the Intel XScale 416MHz. How does the Samsung 400MHz compare? Has anyone owned the Magician as well that can compare the two? I want something at least as fast as the Magician for use in windows apps, and gaming performance in particular. If anyone has been able to play with both devices I would really appreciate your thoughts about the speed compared between the two.
Thanks

I'm also interested, having a Magician. I'm looking for a good reason (or rather excuse) to upgrade!

I don't have a Magician, but if you find a benchmark you'd like me to run on my Trinity, I'd be more than happy to help you compare them.

please use sk tools. Benchmarking is possible with trial version.
http://s-k-tools.com/index.html?m_downloads.html#tools
Thank you,

I upgraded from a Magician to the black beauty Trinity...
And haven't regretted it for a minute. The only downside for me was that i had to get used to a dutch OS instead of english, because in the Netherlands a WWE version is sadly not available.
As far as performance goes, i can tell you that literally everything on the Trinity runs smooth, fast en stable. Of course there are some fine-tuning bugs to be ironed out, but hey: was the Magician that good on it's first ROM ?
The only things that have annoyed me so far, are the horribly slow response to scrolling using the wheel (and the Dpad aswell in fact), and the fact that we have to deal with the MS BT stack which will always have it's bugs and annoyances.
The processor can do a lot at the same time without slowing the device down (only exception being A2DP), and i was pretty suprised how much i could install into main memory on this device. It has around 60 Megs free storage at first use, and that's almost double the size of the 'storage'partition on the initial Magician (half of the 64 Megs RAM).
Batterytime is also significantly better than that of a Magician (even so with having a UMTS radio on all the time), and the screen is just awesome
WiFi has great reception, and the device is much nicer to handle than a Magician due to it's more rounded curves and bigger/more buttons and WM5 being much more focused to one-handed operation (which works very nice).
Absolutely great device i must say, so i'll recommend: take the plunge !
I just hope that a well-tuned ROM that fixes the little annoyances will be released soon, so this baby can take me through at least the next 3 years. If that ROM contains GPS as well, it'll make the P3600 the ultimate killer device (but i can live without, as using a BT GPS mouse works just as well for me).

Benchmarking
Thanks for your info, Moaske.
Another excellent benchmarking tool is SPB Benchmark. You can download this software for free at: http://www.spbsoftwarehouse.com/downloads/benchmark/SpbBenchmark1.6_setup.zip
mikesol, If you could also please post your benchmark results with this software we would greatly appreciate it!

Moaske said:
As far as performance goes, i can tell you that literally everything on the Trinity runs smooth, fast en stable. Of course there are some fine-tuning bugs to be ironed out, but hey: was the Magician that good on it's first ROM ?
QUOTE]
Thanks Moaske. Yes, I agree that no PDA is perfect from the first ROM. What I am concerned about is about HTC releasing ROMs, or rather their lack of doing so. I purchased my Jam from one of the first batches to arrive in the UK, and Imate released regular ROM updates for the first few months. AFAIK, HTC have not yet released a ROM update for any of their devices. I am also not so sure of HTC's level and commitment of support. The one time I had to send the Jam in for repairs, I was very pleased with the way Imate handled the matter. Still to be seen if HTC can do the same.
Click to expand...
Click to collapse

benchmark
Well, I use both (JAM and P3600)
Did the benchmark per your request (attached), with SK Tools
Enjoy

Obviosly the Jam is way faster than the trinity i some areas
RAM access Speed index; Jam 6806, Trinity 1644
Main storage (read)KB/sec; Jam 7236, Trinity 3032
Storage Card (write); Jam 671, Trinity 154
In two areas the Trinity is faster:
Main storage (write)KB/sec; Jam 269, Trinity 493
Draw bitmaps Speed index; Jam 424, Trinity 542
The big question is of course: what does these differences mean in real life use?

@tomerbn thank you for your help.
in my oppinion there will be no remarkable difference in daily use. maybe programs will be opened a little bit slower but without a stopwatch you don´t realize it.
a fine toy and for sure my new phone
fore comparision data from artemis with omap 200 cpu:
Integer;102.3848;Moves/25 usec
Floating point;2.524;MWIPS
RAM access;231;Speed index
Draw bitmaps;377;Speed index
Main storage (write); 638.60;KB/sec
Main storage (read);2094.78;KB/sec

Well it's fast until you try to playback videos with TCPMP.
The OMAP 850 beats the Samsung 400 Mhz.
This cpu is no good for video and relies on IMAGEON coprocessor for hardware acceleration. And as long as it's not working...
http://www.corecodec.com/forum/index.php?topic=3688.0

did you activate GDI ?

what do you mean by "activate GDI"?

Hi,
I traded my Magician to a white Trinity last week. Trinity is cool!
I have no clue on the comparison figures; but from my own usage, I think that:
1. Trinity runs WM5 smoothly, better than O2 Atom
2. screen display is cool, but nearly blackout under sunlight
3. BT 2.0 (and A2DP) is good; now I can listen to my fav songs via BT
I am very happy with Trinity!

meroupow said:
what do you mean by "activate GDI"?
Click to expand...
Click to collapse
i read in a german forum, if you activate GDI in video settings, then playback should run smoothly. i do not use tcmp so i cannot give further hints.

meroupow said:
Well it's fast until you try to playback videos with TCPMP.
The OMAP 850 beats the Samsung 400 Mhz.
This cpu is no good for video and relies on IMAGEON coprocessor for hardware acceleration. And as long as it's not working...
http://www.corecodec.com/forum/index.php?topic=3688.0
Click to expand...
Click to collapse
Set it to 'RAW-framebuffer' and it will run smooth as butter
The main problem with the ATI-imageon, is that it isn't being used at firmware level (yet)... If it had, this would be one great device

tom0_1 said:
...in my oppinion there will be no remarkable difference in daily use. maybe programs will be opened a little bit slower but without a stopwatch you don´t realize it...
Click to expand...
Click to collapse
I agree absolutely with that
But the slow response is not all that consistent anyway, most of the time it's response is very snappy....maybe i wan't clear about that. It's only the scrolling that responds terribly slow... and A2DP is a damn heavy task on the processor, so the little slowdown in response is less worse than i had expected...
All in all a great device; way cool upgrade, way better...

Moaske said:
Set it to 'RAW-framebuffer' and it will run smooth as butter
The main problem with the ATI-imageon, is that it isn't being used at firmware level (yet)... If it had, this would be one great device
Click to expand...
Click to collapse
I do not agree:
- first for best quality directdraw is better than rawframebuffer and is equivalent in terms of performance.
- second "smoth as better" except for h264, xvid, wmv... and anything that is more than 320*240. so in fact it's smooth only with divx 5, 320*240 reencoded movies.
oh let me think... it's compete crap in fact since my HP4350 bought 3 or 4 years ago is able to play whatever full divx movie without reencoding and only have 400Mhz Xscale cpu.

So i understand that re-encoding is to much a hassle for you...? And you expect full-size DVD movies to run on such an underpowered device ? Honestly; could the Magician cope with VGA or higher movies at high framerates...? Mine didn't...

Movie playback
It sounds like the general vibe here is that the Trinity pretty much sucks for playing movies compared to the XScale 416MHz. I can't figure out why HTC is going with the Samsung CPU instead of Intel for their new devices! Cheaper maybe? This device could have been so sweet if it had the right processor in it.

The Processor in the X1

Coming from the Rokr E6(that came out in 2006) that has a intel PXA270 Rev7(v51) processor, a part from the built Ati graphic chip in the Qualcomm I am very dissapointed. I know the the processors are different but come on, The E6 was clocked at 312MHZ and could be boosted to 530MHZ and 624MHZ and was a single core processor. Today I got real excited because I found this app called nueCPL-ClockSpeed v1.3 thinking finally I will be able to this push Duel core Processor higher than a measley 528mhz.Sadly, come to find out the app limit to push the processor was only 528mhz. I posted a screen shot to show. Does anybody that knows the ins and outs of the Qualcomm MSM2700, know if it can be pushed higher than 528MHZ and would be so kind enough to list the apps that can do it.

After searching this forum for some type of answer, I came to the conclusion that I'm never buying a phone with a qualcomm processor again.

Viper89 said:
After searching this forum for some type of answer, I came to the conclusion that I'm never buying a phone with a qualcomm processor again.
Click to expand...
Click to collapse
lol, you aren't the first person to express disappointment with qualcomm.
It's not a bad processor, but for our smartphones (which the average XDA member probably requires a lot of CPU power) it is a little weak. I think the average Joe with a stock WinMo phone would be fine with it, but I must admit I am underwhelmed.
I want Snapdragon in my next phone.

http://pdadb.net/index.php?m=cpu&id=a7200a&c=qualcomm_msm7200a
on this site you have mostly all smartphones and their processors. and its said that 528Mhz is the Max recomendable speed so i gues its not possible to set it to more then 528MHz. but if you look at devices with these processor X1 was one of the first that used this processor. and even this year there were good phones that used this 2 year old processor technology (HTC Touch Pro 2, HTC HERO). Shure its no 1 or 1.5 GHz Snapdragon but i think its a fine processor. N97 has weaker processor and alot of folks think N97 is better than X1 (I still dont agree with them).

gbajzelj said:
http://pdadb.net/index.php?m=cpu&id=a7200a&c=qualcomm_msm7200a
on this site you have mostly all smartphones and their processors. and its said that 528Mhz is the Max recomendable speed so i gues its not possible to set it to more then 528MHz. but if you look at devices with these processor X1 was one of the first that used this processor. and even this year there were good phones that used this 2 year old processor technology (HTC Touch Pro 2, HTC HERO). Shure its no 1 or 1.5 GHz Snapdragon but i think its a fine processor. N97 has weaker processor and alot of folks think N97 is better than X1 (I still dont agree with them).
Click to expand...
Click to collapse
thank you for the link, it's not a bad processor but it's defiantly to weak to run WM, My phone freezes everyday which is freakin ridicouls I've never had this problem with my old phone which had a far less superior processor, then again my old phone ran linux and I'm using the original rom that came with the phone but still thats no excuse for having to reset my phone every day and even running the latest thigs to improve perfomance like advace config etc.....

Hi guys, i think most of you have heard the rumor about the X1 CPU is underclocked to 400MHz.
Is it true or not? I found something about the battery status app showing only 400MHz, but someone said that 400MHz is the max frequency battery status can show. Then i found something with the Xperia X2 info tool (dont know the name) showing 400MHz, too.
I downloaded nueClockControl, it shows 528MHz.
loco

locomarco said:
Hi guys, i think most of you have heard the rumor about the X1 CPU is underclocked to 400MHz.
Is it true or not? I found something about the battery status app showing only 400MHz, but someone said that 400MHz is the max frequency battery status can show. Then i found something with the Xperia X2 info tool (dont know the name) showing 400MHz, too.
I downloaded nueClockControl, it shows 528MHz.
loco
Click to expand...
Click to collapse
The frequency IS 528MHz. Try the JBenchmark estimator if you don't believe nueClockControl:
http://www.jbenchmark.com/jbacepr.jsp Mine shows 515MHz estimated.

Some MSM chips can be overclocked. I have had my TP run at 800Mhz before.
Check THIS out.
Pretty sure it won't work with the X1 but who knows.
dwizzy130

Unfortunalety it's not working with X1 (stock german ROM). The phone freezes instantly when i confirm the Clock change to 768 MHz.
I was a little disappointed of the X1, when i tried to run Super Mario or Mario Kart on SNES Emu (not to mention Metal Slug 2 @ FinalBurn, it's even worse). I thought this would be working better with more than 500Mhz and 256mb RAM. I hate to play games without sound.
I wish it would be as good as a PSP at 222 MHz. Ok, PSP has only 480x272, but also it has only 32mb RAM and only 2mb RAM for GPU.

Vipe'
I feel your pain. Add me to those who are disappointed with the Qualcomm 7200 and will not buy another WinMo phone without a 1 GHz processor. Otherwise, here are some confirmations and other observations:
- The current X1 processor DOES run at 528 MHz as others have mentioned above
- It CAN be overclocked to 768 (or so) with neuOverclock and it's like a sweet dream, but...
- neuOverclock is highly unstable. Most of the time it simply freezes the phone, requiring a reset. For some reason I could only usually get it to work about once a day, no matter how many variations I tried (eg in airplane mode etc etc).
- Unfortunately the genius (seriously) who developed nueOverclock has gone completely silent on his web site and is not still developing - huge bummer in my opinion. I would make a big donation to anyone who could provide a solid overclocking program, and I bet I'm not the only one.

dwizzy130 said:
Some MSM chips can be overclocked. I have had my TP run at 800Mhz before.
Check THIS out.
Pretty sure it won't work with the X1 but who knows.
dwizzy130
Click to expand...
Click to collapse
ring-bearer said:
Vipe'
I feel your pain. Add me to those who are disappointed with the Qualcomm 7200 and will not buy another WinMo phone without a 1 GHz processor. Otherwise, here are some confirmations and other observations:
- The current X1 processor DOES run at 528 MHz as others have mentioned above
- It CAN be overclocked to 768 (or so) with neuOverclock and it's like a sweet dream, but...
- neuOverclock is highly unstable. Most of the time it simply freezes the phone, requiring a reset. For some reason I could only usually get it to work about once a day, no matter how many variations I tried (eg in airplane mode etc etc).
- Unfortunately the genius (seriously) who developed nueOverclock has gone completely silent on his web site and is not still developing - huge bummer in my opinion. I would make a big donation to anyone who could provide a solid overclocking program, and I bet I'm not the only one.
Click to expand...
Click to collapse
thank you two for the info, I defiantly going to try nueOverclock out.I was actually looking for something in the 600-650mhz but 800mhz is impressive. Edit: well like expected it hung the phone instantly, O well maybe I can get ahold of the developer and incourge him to continue this project

Viper89 said:
thank you two for the info, I defiantly going to try nueOverclock out.I was actually looking for something in the 600-650mhz but 800mhz is impressive. Edit: well like expected it hung the phone instantly, O well maybe I can get ahold of the developer and incourge him to continue this project
Click to expand...
Click to collapse
Go for it! Tell him I got $20 in my pocket I'm ready to part with!

If someone could really develop a stable overclocking tool, i would pay for that too.
I'd like to buy a HD2, but without a contract(subscription) it costs over 650€ here in Germany.
Even with subscription it costs 220€ + 35€/Month for 2 years.
I can only dream of 1GHz Snapdragon and 4.3 inch screen
PS: I bought my Xperia for 280€ (with 8GB Micro SD) from Ebay in September.
The previous owner paid 720€ (without subscription) at release ...
PPS: Iphone 3GS 32GB is about 850€ without subscription, thats kind of weird

Damn.. I was rlle excited to see some people as frustrated as me with quads performance and were looking for ways to improve it but the fact nueOverclock just freezes is a letdown also. I hope someone can find the creator or another usefull method!! let the search begin!