Guys, when I try to open my camera I'm getting the following:
Failed to initialize camera.
36001:100:1
Any ideas???
Thanks,
Dunc
OK, if anyone else has this problem here is how to fix it!
1. Go to O2 shop
2. Bang the desk/shout/flail arms about
3. Recieve replacement Exec
Job done!
Related
OK, im a newbie here. but have had an XDA from day one, also XDAII from release.
I've got no sound on my XDAII also the camare doesn't work
Failed to inialise camera. please reset the hardware - 36001:100:2
i did a search and discovered the no sound problem is due to my recent uninstall of the bluetooth.cab
I however don't know why the Camera isn't working.
My question is: is it easier to upgrade to the latest ROM?
You could try initialising the camera install from the extended rom which contains the camera cab file, you will need to unlock the extended partition beforehand.
i get a similar problem after palying an MPEG file via pocket TV
get the following message :
UNABLE TO SAVE THE CAPTURED IMAGE.
36001:500:10
UNABLE TO GET DATA FROM CAMERA DEVICE
i need to know if this is a problem with pocket TV so i can report to them or is it something on the device?
also downloaded the XDA Special ROM, is it worth upgrading to this ?
any help on this would be great guys. thanks
Please do N O T install the special edition rom, it is for xda 1 only.
Hi there,
Can somebody give me some advice please? Have a Vario II and it's been working perfectly for the last couple of months using WM 5 and PIE. However, now whenever I try and save any image from PIE the error message "Error: Unable to save the file." appears!
Can anyone help me out?
Thanks.
hmm..that's odd..i'd never encounter a problem like this before,even on PIE! even my iPAQ 5450 running on wm2002 doesn't have this problem..better have the experts here fast!
Any ideas guys?
Bump.............
No experts out there??
I ran into the same problem... In my case I think it was a problem with the number of files in a given directory. That said I created a new folder and moved the existing files there. After which I tried the download again and it worked.
Maybe worth a shot.
I got my htc cruise about ten days ago. Camera was working fine.
But four days ago, i got the message the camera could not be initialized. I read on this forum that it sometimes helped to remove the battery for about 15 minutes. So that's what i did. And guess what, it worked for about 1 day
Then i kept getting the message the camera couldn't be initialized. Removing the battery didn't help anymore.
Then i hoped a hard-reset would do the thrick. Windows reinstalled and everything went fine. But now the camera icon is missing from "Programs". I tried to start it by going to the photo album and pressing the camera icon. Nothing happened. Then i use file explorer to go to the exe file. I found the camera.exe file, i tapped it but nothing happens.
Anybody have a solution?
Return it asap and get a new one
Camera issue
Hello,
I got this problem 5 days ago too... Very strange! Tried most of the procedures said here in the forum and none worked. The weirdest thing is that the camera just stopped working from one day to another, i clearly remember of not installing anything during those days.
I am very pissed about this issue! My problem is bigger: I bought it at UK while travelling and currently I live in Brazil (no support center around here).
Do you guys really think that its a hardware problem? How can that be if some other people already said here in the forum that a few days or weeks later, the camera went back on?
Anyone else can help us with this issue?
Regards
Try that one, worked everytime the issue happened for me:
http://forum.xda-developers.com/showthread.php?t=391455
Thats quite strange! My Storage Card is 40% free...
My problem is bigger now... After 2 weeks of "could not initialize" issue, my camera simply doesnt start anymore... I tried to lauch the application directly from the camera.exe but it doesn´t work either...
Don´t know what else to do...
radio rom upgrade?
did you upgrade your radio rom to 1.64.08.21 ?
if your answer is "yes" you should downgrade to Murata radio rom (1.58.21.23) ..
don't forget to backup your data, because Murata Radio does hardreset after downgrade..
No. I use the original Radio ROM (1.58.21.23).
I dont wanna try to change the ROM yet in case I need to send it to service.
I tried to install the Nadavi New HTC Camera and didn´t help in any way. But I noticed that, after uninstalling this patch, the camera exe files went back to the old versions. I tried to uninstall them (the original ones) or delete them in the File Explorer, even in safe mode, and windows mobile wouldnt let me.
Kenhas, looks like Im in the same point as you (exe is not working either). Did you happen to make yours work?
Any other soul could help us in here? (btw thanks for the help given by everybody!)
grgomes said:
No. I use the original Radio ROM (1.58.21.23).
I dont wanna try to change the ROM yet in case I need to send it to service.
I tried to install the Nadavi New HTC Camera and didn´t help in any way. But I noticed that, after uninstalling this patch, the camera exe files went back to the old versions. I tried to uninstall them (the original ones) or delete them in the File Explorer, even in safe mode, and windows mobile wouldnt let me.
Kenhas, looks like Im in the same point as you (exe is not working either). Did you happen to make yours work?
Any other soul could help us in here? (btw thanks for the help given by everybody!)
Click to expand...
Click to collapse
have you tried to delete the /DCIM directory from your storage card and soft reset ?
if your exe is broken you probably need to hard reset.
I formatted my storage card (8 gb) and soft reset... no deal
My exe is broken now. Do you really think the hard reset now is going to fix it? Before I had the "unable to initialize device", now I don´t have anything
I installed both Microsoft Portrait and Coolcamera to try the camera, they get quite the same error.. something like "failed to get camera"...
grgomes said:
I formatted my storage card (8 gb) and soft reset... no deal
My exe is broken now. Do you really think the hard reset now is going to fix it? Before I had the "unable to initialize device", now I don´t have anything
I installed both Microsoft Portrait and Coolcamera to try the camera, they get quite the same error.. something like "failed to get camera"...
Click to expand...
Click to collapse
I don't know if those tools share the same camera dlls, but if that is the case, a hard reset might fix things, otherwise, it means it is a hardware failure, and you will need to send your phone back to service.
FYI, when I faced camera issues, I installed the NADAVI WITH FIX cab for Kaiser , and that version only made the camera tool work again (although for me the rear camera was not working due to the storage card issue)
Maybe try installing that one first before hard resetting
http://rapidshare.com/files/97924716/Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab
Hi guys, as you can see I'm new here! In fact I'm even new to smart phones; I bought one yesterday (the touch HD)
I'll kick off step by step:
The first thing i installed was google maps from the mobi download....all works fine!
Next I downloaded Gsen from my PC and transferred it over to my phone....exctracted the cab file and when trying to install it, it kept taking me to a blank white screen......I gave up with that, also tried downloading it from my phone, other sites etc, but to no avail!
After turning my phone off and on again, every time i try to install ANYTHING I get the message,
"The file 'XXXXXX' cannot be opened. Either it is not signed with a trusted digital certificate, or one of its components cannot be found. If the problem persists, try reinstalling/restoring this file"
I have tried reinstalling/restoring all the files in question but on retry, i get the same message. Any help would be GREATFULLY welcomed and appreciated.
Thanks in advance!
aresnalfc said:
there is a piece of software which you will need to install in order to sort this problem out. i no you have problems with installing software but this works because it uses FM signals from your phones camera flash
Click to expand...
Click to collapse
what are you talking about??????? nonsense
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
There are a couple of things you can do:
- Manually try to install it using the file explorer: \Windows\OpenCZ_Settings_Topac.CAB
- Make a hard-reset (hold Vol-up & Vol-Down and press the reset button under the battery case to see if it happens again.
Thx for swift reply ...
- I tried several hard resets and booting with / without SIM and or microSD - still the same error
- I managed to get the phone partially working, because you can move the error window aside and access the startmenu and open explorer. I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Unfortunately I can not access the phone via USB (first customisation hasnt finished and active sync does not open) and I'm afraid flashing the device with another ROM because of warranty
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
well if you get this error even after a hardreset, you should definitely send it back..
OliveJeans said:
well if you get this error even after a hardreset, you should definitely send it back..
Click to expand...
Click to collapse
I will ... but any idea how to lower phones security?
pylorus said:
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
Click to expand...
Click to collapse
My device from Czech too. I found this cab file in Windows folder, if you need it i'll upload it for you.
pylorus said:
Thx for swift reply ...
I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
Click to expand...
Click to collapse
Try sdkcert. That should do what you want install it before installing your .cab what is needed
Problem solved - i sent the device back and the whole board was replaced - new IMEI, but now its working like a charm
for the future..I have had a same problem with my TD2..After few hours I found out that I could this error off in taskmanager. Then it worked.. It was just some czech layout for my topaz but I did not want it either.. So for those who will buy TD2 with this error and don´t want chzech langugage on it, just close it in taskmanager..