tt5 don't works with flight mode activate ? - 8125, K-JAM, P4300, MDA Vario General

i have a qtek 9100 with tomtom 5.210 installed.
when i use tt5 i must leave my radio unit turned on (flight mode deactivate) if i turn off radio unit (flight mode activate) my tt5 stops connection with gps and a message appear (no gps with flight mode activate)
please help me...tomtom site have only ridicolous answers...

When u turn on flight mode, all radio communications are turned off.
Bluetooth, wifi, and gsm.
So your bluetooth gps will not work anymore.
Havn't found a way yet to turn off the gsm without turning on flight mode, but personally i see no reason to do this.

the reason:
when i leave my country for holiday i usually turn off my telephone that i use for work but i would like to use my tomtom navigator. with my old magician i could do with newest wizard no... please help me....
sorry for my english

Put your networksettings to manual and your phone will look for you home network and will be unable to connect
Or don't enter a pin but push cancel (not certain about the last one)

Couldn't you put a different SIM in when yuo go on holiday?

The workaround is to configure TomTom to use "Other Cable NMEA" instead of "Other Bluetooth" - then you can have your phone switched off, and Bluetooth switched on.

thank you very much for trying to give me a solution...
the tip of network doesn't work...the phone doesn't connect home and request me to choose another network.
the tip of the nmea cable doesn't work...i can't reach com6 port in setting configuration of tomtom program
i think i probably don't have a solution...

Did you try the trick of not entering the pin for your SIM mentioned above?
That would be a nice solution because you still would be able to call emergency number.
Very handy for when TT sends you straight off a cliff or something

I use to have to turn my phone part of on my XDA IIi for TomTom as my SD card (SanDisk Ultra II 2GB) locked up when the radio was on.
There are 3 ways to achive this that I have all found successful:-
1. Remove your Sim Card
2. Create a PIN on your Sim Card and press cancel when asked for it.
3. Download PocketZenPhone (http://zendrui.free.fr/) this will allow you to create a profile with just the phone radio turned off that you can toggle on and off.
I now use a Transcend 80x 512mb SD card for TomTom which never locks up (Thanks to the forums here for recommending this one!!! ).
Hope this helps
David

the pin trick works fine thank you very much....and marry xmas

hi, i have an o2 xda mini s. My wifi and bluetooth work fine with flight mode on.
rgds

what's your rom release? which version of tt5 did you install? thks

Related

Phone and Bluetooth

Is it possible to turn off the phone, but stay with bluetooth turn on&
you can, just switch the flight mode on (click on network indicator on the top bar and select "turn on flight mode")
Like this, phone function will be powered off, but pda and it's utilities won't.
Bluetooth will also be turned off in flight mode, all wireless communication will be
sorry to disagree but i just made the test now and with FLIGHT MODE ON my bluetooth still works.
What happens is when you turn on the flight mode the bluetooth will be disconnected, but if you turn the bluetooth on it will remain on and working.
Well then your phone must be faulty because in a flight no wireless communication is supposed to take place and when i did what you said my phone turned the bluetooth off and said "Turn off flight mode first".
In a flight any Ghz Band Communicatioin (GSM/GPRS/Bt/WiFi) Could disrupt comunications between Flight and Tower so all that has to be turned off in a flight.........
georgexoasi said:
Well then your phone must be faulty because in a flight no wireless communication is supposed to take place and when i did what you said my phone turned the bluetooth off and said "Turn off flight mode first".
In a flight any Ghz Band Communicatioin (GSM/GPRS/Bt/WiFi) Could disrupt comunications between Flight and Tower so all that has to be turned off in a flight.........
Click to expand...
Click to collapse
@georgexoasi I don't disagree on your point about DSM/GPRS/WiFi because it interfere with radionic-link. Bluetooth don't because it uses not such a high impedance radio transmition to work. Although some flight companies ask not to use any kind of radio transmitions, most of flight companies allow bluetooth because it does not interfeer with radio communications and they are not able to detect if you use it or not during the flight. Also notice that bluetooth operate on 2.4GHz frequency (it's and unlicensed frequency, usually used for garage doors openers, microwave ovens, and things like that), were is no way to interfeer with plaine-tower communications that use much higher frequencies.
Still you say that your phone is able to operate BT in flight mode? That has never happened in any phone that has flight mode that i have used viz. 6630,P800,P900,P910i,I-Mate, O2-Mini. None support it. if u go to offline/flight mode all radios go off
Yes i tested again with Qtek S100 and the BT works with Flight Mode ON.
Later I can try with Nokia 9500 Communicator to see what happens.
I agree with georgexoasi. You cannot use Bluetooth when Flight mode is enabled. Maybe you did a REG tweak but normally it won't work
@georgexoasi
Did you try to do it or are you only saying that enabling Bluetooth doesn't work while in flymode? For me it makes sense to allow this to the user since people might want to use Bluetooth without using the phone (as like a normal PDA). The only possibility to turn off the phone is to go into flymode (without using any extra software). That doesn't always mean you're currently flying. On my Magician, you can go into flight mode and turn the Bluetooth radio back on. Maybe it depends on the ROM version you use.
@coelhoapm
Bluetooth don't because it uses not such a high impedance radio transmition to work
Click to expand...
Click to collapse
What are you talking about? The impedance is given by the medium (air) and can't be changed. What you mean might be the low power that is used for transmitting bluetooth signals. That indeed counts since it only can slightly interfere with the onboard electronics. But, to be honest, do you really think all people always turn off their phones on all flights. It doesn't seem that modern planes have trouble with this, which is good :shock: .
Ofcourse i tried it it is not possible
In flight mode, when I press the BT icon I get a warning: "Please switch off flight mode first!". When I switch off flight mode, BT switches ON automatically. It's weird that some device allow it. Never had a phone that allows BT in flight mode either!
I just contacted Portuguese Airforce and BT are generally allowed when flying. The criterium of allowing or not depends on the flight company.
By the way... A friend has a BlueAngel and I asked him to test this... and BT on blueangel also work when flight mode is on...
Well.keep saying it if it makes you feel better......
Adios i gues i've said what has to be and believing or not is upto u.
Ok, enough of the arguing!!! 8)
To settle this, I have a XDAIIi / Alpine and my bluetooth does NOT work when flight mode is enabled.
Coelhoapm post pictures of your today screen with flight mode enabled and the bluetooth icon showing that it is actually ON.
I actually want it to work, so is there any REG Hacks that can enable this to work, if anyone knows please post.
Cheers,
LydiaChris
flight mode
Hi i just tried flight mode then re-enabling bluetooth it left the phone switched off but said yurn on flight mode again at top of screen.
Mda2(Himalaya) 8)
Hope this helps
@georgexoasi & lydiachris
Attached the picture of my screen with Bluetooth and Flightmode enabled. I guess it's due to my old Firmware which is the first that was released (1.01 or something). This looks like a real drawback of the newer firmwares (where as I'm still looking for their advantages ...).
Enough said!!!
Sorry about that
VERY nice today screen background, where did you get it from!?!?!?
Nothing to feel sorry about. As i said, it might be due to different ROM versions. I prefer it the way it's done on my ROM actually, because I can use all combinations, especially I could use my Magician as normal PPC even when the SIM card is inserted.
Concerning your question about the background: It belongs to an extended theme for SPB Pocket Plus, called Spb Black Ext. You can download it from their site I think. I am only using the system icons for battery, light etc. from another theme because they are smaller.
hello, worse that everything you said, I tried to enable bluetooth and Wireless and both are working in flight mode.
I think is a bug from rom 1.40.0 of Qtek 9090
Regards
Marcus

TT5 Bluetooth and floight mode problem

Before installing TT5, my bluetooth worked fine, even in flight mode. After installing TT5, bluetooth does not work at all. Everytime I try to activate it, it comes with the warning: Please turn off flight mode first. My GSM part is on, so flight mode is off, but I still get the message. soft reset and re-installing TT5 did not work, neither did removing TT5 Bluetooth app.
I use TT5 as a road map, without bluetooth GPS, but no matter what I try, it keeps popping up a message every 10 secs asking me to turn flight mode off. I don't need the bluetooth to be on when using TT5, even more, I like it to stay off for power reasons.
Also after un-installing TT5, my bluetooth still does not work! Can anyone out there help me?
I get the same problem also.My bluetooth does work however as i use a bluetooth gps.I find that when your in TT5 and the message pops up,just quickly turn flight mode on then off and then you can carry on using it fine after that with no interuptions
I had the same thing. It turned out to be a 'Flightmode' program I downloaded using a link from this site. For some reason it didn't always turn BT completely back on.
Instead I found a program called RadioOff, also on this forum, and it works perfectly. No TT5 problems since this switch.
My bluetooth issues are partly resolved. by turning flight mode on, then resetting and then turning it off again bluetooth works again. Perhaps my flight mode switcher, a different one from yours, is making trouble. Can you send me the radiooff that you mentioned, since I cannot find it on the forum. my email is jdfkok at hotmail. Thanks!
I'll upload it here, so everyone has a chance to pick up this nice proggy
Don't know who made it, but it's a job well done.
thanks man! I will report back to you if it solved my problems
Hi, just tested it and I think it is the same one I already use! Byte count is exactly the same, just the name and icon are different. But I noticed another thing...When I switch on flight mode with both apps, my bluetooth stays on and can be switched on and off. When I switch flight mode on using the standard windows application in the phone bubble, bluetooth goes off as well and cannot be switched on again! Looks like the app you posted makes it possible to use bluetooth while the gsm is off, while the normal way to enter flight mode also shuts down the bluetooth radio. interesting find! Now all the problems I had can beresolved by using the right way to switch flight mode on and off. Thanks for your help!
Happy to help Although I find it very weird that 'Radio Off' means that BT is still running! But maybe it's made for a non-BT device?
Yes, strange isn't it? But might be helpful in some circumstances to have it work like this. I know I won't touch my bluetooth settings anymore, now I have this sorted out, don't want to spend another 2 hours figuring out how to switch it the way I want :wink:
Have teh same problem with QTek s100, can't turn on bluetooth (get "turn on flight mode first"). Sorry, where did you get RadioOff.exe program? Seek all the site and forum and didn't see where can I download it.

Disableing phone feature

I want to use my I-Mate Jam as a PDA only. And I want to disable the phone feature so that it wont pop up all the time to ask to put in a SIM card. How do I do that?
Tap on the "no SIM" or antenna icon in the top bar. A bubble should pop up with "turn flight mode on" link. Tap it and the phone part will be disabled.
By the way are you using Jam or Jamin?
In Jamin (which is the prophet) you can also do this through comm manager (button on the left side of the device).
I am using JAM. But I dont want to enable flight mode on as I want to use bluetooth. all I want is just to disable phone feature. I want to use this device for GPS only in my car. That is why I want to disable phone only.
Well first off you are in the wrong forum. Please check the pictures (I really don't remember what the name for the JAM is, but it is not prophet).
Second, from my experience, at least on WM 5 device you can enter "flight mode" which will turn off all wireless, then re-enable bluetooth through BT manager or similar.
The phone part will stay off until you exit "flight mode".

TomTom in airplane mode

I have a duo simcard one sim for in my car and one for in my touch HD.
The problem is that i have to put my phone in airplane mode so all calls are coming in on my car phone.
But when i want to use my TomTom it says it cant use gps if airplane mode is enabled.
Is there a way to get my TomTom working in airplane mode? Or is it possible to disable only the phone functionality and not the GPS?
Yes, disable the phone and activate the bluetooth, it should work.
I tried that, but still not working
Thats odd, because I had the same issue, and came up with the same solution (enable bluetooth only, not GSM) and it worked for me, TomTom worked.

[Q] garmin xt 4.10 - help

i've had this for a long time for my kaiser and used it previously on my tilt2.... heres the problem... i've since tried to reinstall on my tilt2 but now it won't use the gps (just keeps scanning bluetooth). normally i would just hook it back up to the computer and re set it all up... but i kinda forgot to back up the program (i just have a copy of my sd card) and i have a new computer.... so now i'm SOL? any help would really be appreciated. i can't really afford to spend any money to fix this....
thanks
q
You need to enable the GPS Intermediate Driver. Touch the signal strength graph at Garmin XT home screen, select disable bluetooth GPS, touch "use GPS Intermediated Driver" radio button, select done, then accept changes. I would recommend that you use the Quick GPS tool prior to doing the steps above and be sure to have windows manage access to gps automatically (in windows settings menu).
sadly theres no option for that.... when i hit enable/disable it automatically goes to bluetooth. no options. :/
Settings>System>External GPS>Access>(x) Manage GPS automatically>Ok =]
already checked off... hmm
A forum search for "garmin xt intermediate driver" results in a number of hits.
Here's one: http://forum.xda-developers.com/showthread.php?t=622706
Do you happen to have a trial version?

Categories

Resources